Proposed Construction of Hindu Hriday Samrat Balasaheb Thakarey Art Galary at Reservation No.122 (Part - 2) in MBMC Area. (Basic Facilities Special Developmet Fund)

Amount

ITEM NO 01 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR 21.02 / 197

ITEM NO 02 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical means SSR 21.04 / 197

ITEM NO 03 TRANSPORTING OF EXCAVATED MATERIALS lead 20.00 k.m. SSR C1

ITEM NO 04 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR 21.38 / 201

ITEM NO 05 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/ quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (PCC) SSR 24.10 / 227

ITEM NO 06 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR 21.37 / 201

ITEM NO 07 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. SSR 21.36/195

ITEM NO 08 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C columns and steel stanchion etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 25.15/231

ITEM NO 09 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal fo R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 25.35

ITEM NO 10 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 25.54 /235

ITEM NO 11 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 25.74 / 237

ITEM NO 12 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 26.33 / 245

ITEM NO 13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR 27.05 / 254

ITEM NO 14 Providing uncoursed rubble masonry of trap / granit / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. SSR 28.04

ITEM NO 15 Providing coursed rubble masonry second sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including raking out joints when plastering is to be done and striking joints when no plastering is to be done on the inside, watering scaffolding etc.complete SSR 28.10

ITEM NO 16 Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering Incharge. Using Concrete Batching and Mixing Plant SSR 7.05

ITEM NO.17 Providing and fixing mild steel grill railing weighing 20 kg / sqm. with including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, , with one coat of anticorrosive paint andtwo coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete. Spec. No. : As directed by Engineer in charge. SSR 40.11

ITEM NO 18 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR 39.01 / 313

ITEM NO 19 Providing of Tufwud make Accoustic Door to effectively control noise inconference rooms, broadcasting studios, theatres and music practice rooms. with prior approval of concernedSuperitending Engineer SSR 50.82

Door Frame: Providing Frames for Accoustic door shutters with double rabbit of 68mm 1st class Malaysian Hardwood Frame densified and pressure treated with chemicals in vacuum impregnation vessel under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 70 mm spray quoted with 2 coats of In tumescent paint of minimum 200 micron, with 1 row of Hafele Accoustic seals concealed in the groove of the Frame for noise control, etc. complete as per direction of Engineer in Charge SSR 19-20/50.82

ITEM NO. 20 Shutter: Providing of 65mm thick Accoustic Door Shutters with wooden structure comprising of Chemical treated internal timber with anti termite chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x 48 mm with 48 mm thick infill of ceramic vermiculite mix of density 54Kgs/CMT, 3mm sheet rubber interlayer sheet on one side for acoustic property, faced with6mm High Density Waterproof Ply confirming to IS Code 2201, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of PUpaint of minimum 200 micron of color of engineer choice (any Veneer or Lamination will cost extra), without any external lipping along with double rebatting in shutters & accoustic seal SSR 19-20/50.82b

ITEM NO 21 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary SSR 34.09/271

ITEM NO 22 Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) SSR 39.04 / 313

ITEM NO 23 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kg. to 20 kg. Per Sq.m.) Spec.No.: As directed by Engineer- in-charge. SSR 23.09

ITEM NO .24 Providing And Fixing Modular Partition System For Toilet of Approved Make & Finish Spec. As directed by Engineer In-ChargeMR

ITEM NO 25 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete SSR 32.11 / 269

ITEM NO 26 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 32.04 / 268

ITEM NO 27 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring SSR 33.40 / 279

ITEM NO 28 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting SSR 33.41 / 279

ITEM NO.29 Providing and laying 10 to 13mm thk. heavy duty,scratch resistant, high abrasion resistant vitrified tiles (Durastone of equivalent) conforming to I.S.15622 with special hard wearing layer and water absorbtion less than 0.08% for flooring of an approved, quality, make, pattern and size for flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cutting, leveling, jointing, filling the joints by neat cement slurry or approved colour grout, curing, finishing etc complete as directed by Engineer In Charge.(1000mmx1000mm)MCGM R2-CS-FL-10

ITEM NO 30 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR 33.35 / 278

ITEM NO 31 Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR 33.06 / 273

ITEM NO 32 Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete. SSR 33.04

ITEM NO 33 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 33.34 / 278

ITEM NO.34 Providing and laying in position flooring of telephone black/ Amba White/Cat bary brown/Rubyred/Ocean Brown granite sand faced stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.MR

ITEM NO.35 Providing and laying Polished brown kota flooring 25mm to 30mm thick and required width wide in plain/diamond pattern ona bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete.MR

ITEM NO.36 Providing and laying yellow jaisalmare 25mm to 30mm thick and required width wide in plain/diamond pattern ona bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete.MR

ITEM NO 37 Providing & Fixing in position, Carpet more than 800+ gsm, madewith100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etccomplete SSR 19-20/51.13

ITEM NO.39 Providing and fixing 1.35m high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5-2 mm thick at top and middle ,40mm diameterand 1.5-2mm thick vertical supports spaced at 1.5m center to center and 8 to12 mm thick toughened glass including fabricating ,fixtures,errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. completeMR

ITEM NO 40 Providing and fixing teak wood hand rail of 60 mm x 75 mm as per detailed drawings or as directed by the Engineer, including french polishing, etc. complete. (Note : The work to be executed on preapproval of Superintending Engineer). SSR 37.10

ITEM NO 41 Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. SSR 32.26

ITEM NO 42 Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. SSR 33.24 / 276

ITEM NO 43 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR 33.25 / 277

ITEM NO 44 Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. SSR 35.24

ITEM NO 45 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. SSR 35.21 / 288

ITEM NO 46 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. SSR 35.23 / 288

ITEM NO.47 Automatic Sliding Door with motion sensor :-Providing and fixing Automatic Motion sensor sliding doors Double Leaf operator both shutters moving in same direction with Anodized Beam Profile and slide guide, profile covered, profile cap, electro blocker with cord releaser 12 mm clear toughened glasses for opening of 3 mt x 2.75 mt ,panel size will be 1.5 mt x 2.7 mt – 2 nos. with hardware , labour all inclusive(MR)

ITEM NO.48 12 mm clear Toughened Fixed Glass with Door :-Providing and fixing 12 mm clear toughened glasses for doors with Patch fittings of Enox or Exotic make with top and bottom patch, Floor spring, 600 mm H Type Handle, Top Pivot and Lock crystal edge polish all sides for fixed panels, all other necessary hardware and fittings, inclusive labour. (MR)

ITEM NO.49 Structural Glazing : - Providing and Fixing Semi Unitized Structural Glazing system comprising of aluminium framework arrangement fabricated from Curtain Wall Section 63 x 57 of 1.57 Kg./Mt. In vertical as mullion and Horizontal as transom both shall be finished with approved 20 micron colour Anodizing or Powder Coating. with 2 nos. of EPDM gaskets in each section with Saint Gobain make 5 mm SGG Antelio plus ST 167 Sparkling Ice Clear Reflective Toughned Glass fixed with glazed panel of Sash frame 25 mm x 19 mm with T patti toggle, all aluminium sections joints with aluminium clit angles of 16 gauge, Structural Glazing will be carried out with spacer tape and structural dow corning/GE silicon, Galvanized M.S. Brackets for frame fixing with 10 mm Anchor fasteners and screws, nut bolts, washers, open cell polyethylene backer rod, Weather sealant GE/Dow Corning make and all other necessary Hardware fittings and Labour all Inclusive.(MR)

ITEM NO.50 Openable :- Providing and Fixing Openable Panel in item no.1 with additional 4 Bar Hinges, Handle cum Locking arrangements, With additional aluminium anodized frame for Opneable, and flashing for water dripping. (MR)

ITEM NO.51 Aluminium frame Openable Doors :-Providing and fixing 2” series Aluminium Openable swing doors 2” x 4” Aluminium sections all sections anodized with 5 mm clear reflective glass, with floor spring, pivot, S S Handle including labour. Door opening with 6 1/2” feet x Height 9 Feet with 2 shutters(MR)

ITEM NO 52 Waterproofing the terrace slabs with average 100 mm thick, brick bats laid in cement mortar bed 1:4 filled with mortar 1:4 of total thickness 100 mm, laid to slope (1:100) with vata 15 cm, at the junction of walls andDo with broken China mosaic flooring instead of IPS set in cementmortar (1:4) 40 mm thick with admixture, of approved water proofing compound, as per manufacturers specification laid after grouting the slab, finishing curing etc. complete as directed and specified. (Horizontal measurement clear between walls will be paid for).MCGM R2-CS-WP-24

ITEM NO 53 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10years guarantee on court fee stamp paper of Rs.500/-including ponding test etc. complete. SSR 31.05 / 264

ITEM NO 54 Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper. SSR 21.25

ITEM NO.55 Providing & fixing in the footpath Combi-Paver having average crusting strength 40 N/mm² shot blasted 60mm thick in approved texture and colour and combination size 100 x 200, 125 x 200, 175 x 200, 225 x 200,275 x 200 to be fixed on uniformly graded river sand cushioning average 25 mm compacted thickness , compacted by proper capacity mechanical compactor with proper level grade and camber etc. complete as specifiedand as directed by the EngineerMCGM-RW-3-39

ITEM NO.56 Providing and Fixing laser cut 3 mm M.S. sheet letters of height 24 inches with studs weled at backside for fixing in wall with chemical grouting , all letters powder coated with all other necessary Hardware fittings and Labour all Inclusive.(MR)

ITEM NO.57 Glass With Stud Fitting for Lift Area :-Proving and fixing 8mm toughened + 1.52pvb + 6mm toughened laminated glass with Stud fittings with Pharma, clear silicon joints all necessaries hardware labour all inclusive (MR)

ITEM NO.58 Providing and fixing 450mmx550mm sizes u perior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR 295/42.20

ITEM NO 59 Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. b) Both side polish SSR 33.33 / 278

ITEM NO 60 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. SSR 40.02 / 338

ITEM NO 61 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) SSR 31.12

ITEM NO 62 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with wate proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3 butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) SSR 31.13

ITEM NO.63 SITC of Electric Traction Passenger Lift with• Rated capacity :- 10 Passenger/680Kg• Floors :- G+1 floor (2Stops/2 Landings)• Location of Lift Machine:- MR/MRL• Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames• Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe GuardApron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc.• COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR& FCC/ground floorMR

ITEM NO.63A For Lift having 1200mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrowsindicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landingdoors with all accessories etc. necessary for the normal safe functioning of lift installation complete CSR 17-1-4 A

ITEM NO 64 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1: 2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etccomplete SSR 42.12

ITEM NO.65Royalty for material

PLUMBING

SANITARY FIXTURES

ITEM NO.66 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) SSR 43.19

ITEM NO.67 Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushingcistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) SSR 43.23

ITEM NO.68 Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. SSR 42.80

ITEM NO.69 Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete SSR 43.37

ITEM NO.70 Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. SSR 41.69

ITEM NO.71 Providing and fixing earthenware lipped flat back/corner type Urinal of Hindustan /Perryware / Neycer / Cera or equivalant make with PVC 5 liters flushing system of 5 liters with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap & soil pipe connection up to the outside face ofwall. SSR 41.61

ITEM NO.72 Providing and fixing C.P. Angular stop cock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. SSR 42.79

ITEM NO.73 Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use). SSR 43.18

ITEM NO.74 Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent ?make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. SSR 42.81

INTENAL WATER SUPPLY SYSTEM

ITEM NO.75 Providing and fixing on walls/ ceiling/ floor CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

a) 15mm dia. SSR 42.55

b) 20mm dia. SSR 42.56

c) 25mm dia. SSR 42.57

d) 32mm dia SSR 42.58

e) 40mm dia. SSR 42.59

f) 50mm dia. SSR 42.60

ITEM NO.76 Providing and fixing gun metal ball valves confirming to IS 1703 with threaded/flanged joints complete with nuts, bolts, gaskets etc.MR

a) 25 mm dia

b) 32 mm dia

c) 50 mm dia

ITEM NO.77 Supplying & installing gun metal gate valve of size 25mm dia as per specification No. FF-VL/GVMR

ITEM NO.78 Air Realesed Valve (ARV)Supplying and erecting 20/25 mm dia gun metal air realesed cock with neccesory GI coupling to be fitted on top FF/FFA/ARVMR

ITEM NO.79 Providing and fixing 50mm diameter water meter with non return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber] SSR 41.30

ITEM NO.80 Supplying refrigerator domestic type approved make 100 liters storage capacity, suitable for operation on 230/250 Volts 50 cycles complete with automatic temperature control conforming to IS specifications No. 1476/79 with one year guarantee for sealed unit in refrigeration system and marking Sr. No. and date of erection.MR

SOIL, WASTE, VENT & RAIN WATER PIPES

ITEM NO.81 Providing, fixing, jointing, testing and commissioning of UPVC SWR pipe confirming to IS : 13592, cut to required lengths including all necessary fittings and specials such as bends, junctions offsets, access pieces (plain or door) & vent cowl. Fixing at wall / ceiling level supported by G.I. clamps, hangers etc. duly epoxy coated.

a) 40 mm dia.

b) 50 mm dia.

c) 75 mm dia.

d) 110 mm dia.

E) 150 mm dia.

f) 200 mm dia.

g) 250 mm dia.

ITEM NO.82 Supplying and fixing of 160MM DIA Leaf trap with kurra made out of UPVC with flange and grating for rain water outlets on terrace etc., complete. MR

ITEM NO.83 Providing and fixing UPVC floor clean out comprising of Plug, socket, elbow, extension piece caulked to pipe and plug with suitable inlet key for opening male threaded joint with Plug, pipe & socket. MR

PUMPS

ITEM NO.84 Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2.25 KW/ 3 HP with discharge 2/4.9 Litres per second (LPS) for head of 14/36 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP CSR 12-1-6

DOMESTIC PUMP FLOW RATE- 3.0 LPS (1 working+1 standby)

HEAD- 20 M

ITEM NO.85 Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2.25 KW/ 3 HP with discharge 2/4.9 Litres per second (LPS) for head of 14/36 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP CSR 12-1-6

FLUSHING PUMP FLOW RATE- 3.0 LPS (1 working+1 standby)

HEAD- 20 M

ITEM NO.86 Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2.25 KW/ 3 HP with discharge 2/4.9 Litres per second (LPS) for head of 14/36 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP CSR 12-1-6

FLUSHING PUMP FLOW RATE- 3.0 LPS (1 working+1 standby)

HEAD- 25 M

ITEM NO.87 Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2.25 KW/ 3 HP with discharge 2/4.9 Litres per second (LPS) for head of 14/36 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP CSR 12-1-6

SUBMERSIBLE PUMP FLOW RATE- 3.0 LPS (1 working+1 standby)

HEAD- 25 M

ITEM NO.88 Supplying and erecting submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s.A.C. supply, having delivery head from 21 to 7 m and discharge from 200 to 800 Itrs. per minute (Max efficiency at 16 m head & 500 Itr discharge) & pipe of Suction 50mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP CSR 12-3-1

SUMP PUMP FLOW RATE- 3.0 LPS

HEAD- 06 M

SOLID HANDLING 10/12 MM

ITEM NO.89 providing and fixing gun metal Y Strainer confirming to IS and tested to a pressure not less than , including rubber gasket, flanges, unions, nuts, bolts and washer etc complete as required. MR

a) 75 mm dia

ITEM NO.90 Providing and fixing gun metal Non Return Valve confirming to IS 778 and tested to a pressure not less than 10 Kg/cm2, including rubber gasket, flanges, unions, nuts, bolts and washers etc complete as required. MR

a) 50 mm dia

ITEM NO.91 Providing and fixing gun metal ball valves confirming to IS 1703 with threaded/flanged joints complete with nuts, bolts, gaskets etc. MR

a) 50 mm dia

ITEM NO.92 Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PGMR

ITEM NO.93 Supplying & erecting Water level controller 230/415 V AC., Two way for under ground tank operation only.MR

ELECTRICAL (PLUMBING PUMP )

PANEL

ITEM NO.94 Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB CSR 6-2-11

ITEM NO.95 Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. CSR 6-1-1

INCOMER

ITEM NO.96 Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-15

OUTGOING

ITEM NO.97 Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-14

ITEM NO.98 Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. CSR 6-5-7

ITEM NO.99 Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-1

ITEM NO.100 Providing and erecting L.T. Current Transformer with ba primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. CSR 6-5-2

STARTRERS

ITEM NO.101 Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P. CSR 12-4-2

WIRES/ CABLES

ITEM NO.102 Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CBLT/ AL CSR 7-1-7

ELECTRICAL

LT PANEL

INCOMER

ITEM NO.103 Providing & erecting 3 Pole MCCB of 600/630 A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB CSR 5-5-5(4 Pole)

ITEM NO.104 Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. CSR 6-5-7

ITEM NO.105 Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-1

ITEM NO.106 Providing and erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. CSR 6-5-2

OUTGOING

ITEM NO.107 Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB CSR 5-5-1(4 Pole)

ITEM NO.108 Providing & erecting 3 Pole MCCB of 600/630 A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB CSR 5-5-5(4 pole)

BUSBAR

ITEM NO.109 Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB CSR 6-2-11

ITEM NO.110 Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as directed. CSR 6-1-1

PANELS, DISTRIBUTION BOARDS

COMMON AREA POWER LOAD PANEL

INCOMER

ITEM NO.111 Providing & erecting 3 Pole MCCB of 600/630 A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB CSR 5-5-5

ITEM NO.112 Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. CSR 6-5-7

ITEM NO.113 Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-1

ITEM NO.114 Providing and erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. CSR 6-5-2

OUTGOING

ITEM NO.115 Providing & erecting 3 Pole MCCB of 600/630 A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB CSR 5-5-5

ITEM NO.116 Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-14

ITEM NO.117 Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-15

BUSBAR

ITEM NO.118 Supplying & erecting of any size Electrolyte Alluminium Patti or bar in bus bar chember / in panel or any other purpose, 500 volt with require capacity with 99.9% alluminium purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB CSR 6-2-11

ITEM NO.119 Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as directed. DSR 6-1-1

DISTRIBUTION BOARDS

Common Area 12 way TPN LDB

Incomer

ITEM NO.120 Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 36 ways, on iron frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB CSR 5-4-3

ITEM NO.121 Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-17

Outgoing

ITEM NO.122 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40 A. 2 pole complete as per specification No. SW-RCCB/RCCB CSR 5-6-2

ITEM NO.123 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-2

8 way VTPN DB

Incomer

ITEM NO.124 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs 24 Poles on iron frame/wooden board. (Vertical Busbar type) as per specification No. SW-SWR/MCBDB CSR 5-4-11

ITEM NO.125 Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-17

Outgoing

ITEM NO.126 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40 A. 2 pole complete as per specification No. SW-RCCB/RCCB CSR 5-6-2

ITEM NO.127 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-2

ITEM NO.128 Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-14

12 way TPN LPDB

Incomer

ITEM NO.129 Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 36 ways, on iron frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB CSR 5-4-3

ITEM NO.130 Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-16

Outgoing

ITEM NO.131 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40 A. 2 pole complete as per specification No. SW-RCCB/RCCB CSR 5-6-2

ITEM NO.132 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-2

8 way TPN DB

Incomer

ITEM NO.133 Supplying & erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 24 ways, on iron frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB CSR 5-4-2

ITEM NO.134 Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-16

Outgoing

ITEM NO.135 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40 A. 2 pole complete as per specification No. SW-RCCB/RCCB CSR 5-6-2

ITEM NO.136 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-2

8 way SPN LDBs

Incomer

ITEM NO.137 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 8 ways for outgoing SP MCB’s on iron frame/wooden board as per specification No. SW-SWR/MCBDB CSR 5-4-15

ITEM NO.138 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/25 A. 2 pole complete as per specification No. SW-RCCB/RCCB CSR 5-6-1

Outgoing

ITEM NO.139 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-2

12 way SPN LDBs

Incomer

ITEM NO.140 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 12 ways for outgoing SP MCB’s on iron frame/wooden board as per specification No. SW-SWR/MCBDB CSR 5-4-16

ITEM NO.141 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/25 A. 2 pole complete as per specification No. SW-RCCB/RCCB CSR 5-6-1

Outgoing

ITEM NO.142 Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-2

RCCB, ISOLATOR, ENCLOSURE

ITEM NO.143 Supplying erecting and marking Four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. CSR 5-3-24

ITEM NO.144 Providing & erecting 3 Pole MCCB of 600/630 A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron frame as per specification No. SW-SWR/MCCB CSR 5-5-5

ITEM NO.145 Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron frame. CSR 5-4-23

ITEM NO.146 Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 16/25 A. 2 pole complete as per specification No. SW-RCCB/RCCB CSR 5-6-1

WIRING AND ACCESSORIES

POINT WIRING - LIGHT POINT

ITEM NO.147 Supplying & erecting mains with 2x1.5 sq.mm F.R.L.S copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW CSR 1-3-1

ITEM NO.148 Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW CSR 1-3-4

ITEM NO.149 Supplying & erecting mains with 3x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW CSR 1-3-14

ITEM NO.150 Supplying & erecting telephone cable 2 pair with 0.5 mm dia. laid in provided PVC casing / conduit asper specification No. WG-TW CSR 1-10-1

ITEM NO.151 Supplying & erecting telephone cable 5 pair with 0.5 mm dia. laid in provided PVC casing / conduit as per specification No. WG-TW CSR 1-10-4

ITEM NO.152 Supplying and fixing Cat-6 LSZH cable suitable for LAN / WAN as per specification in approved manner CSR 1-12-2

ITEM NO.153 Supplying & erecting ISI mark Rigid Steel conduit 16 SWG 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no.1.2.3 CSR 1-1-1

ITEM NO.154 Supplying & erecting ISI mark Rigid Steel conduit 16 SWG 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no.1.2.3 CSR 1-1-3

MODULAR SWITCHES AND ACCESSORIES

ITEM NO.155 Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-8-1

ITEM NO.156 Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-8-2

ITEM NO.157 Supplying and erecting modular type switch 25A ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-8-2

ITEM NO.158 Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-8-10

ITEM NO.159 Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-8-11

ITEM NO.160 Supplying and erecting modular type 3/5 pin25A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-8-11

ITEM NO.161 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-8-34

ITEM NO.162 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-8-35

ITEM NO.163 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-8-36

ITEM NO.164 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-8-38

ITEM NO.165 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-8-40

ITEM NO.166 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. CSR 1-8-41

ITEM NO.167 Supplying and erecting ISI mark Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box. CSR 1-7-7

ITEM NO.168 Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-8-15

ITEM NO.169 Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. CSR 1-8-17

ITEM NO.170 Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box. CSR 1-8-24

CABLES

Supply, Installation, Testing & Commissioning of 1100V grade, Aluminum/copper conductor, XLPE Insulated & galvanized steel tape armouring. The cable shall be heavy duty type conforming to IS-1554 & 7098. The cable shall be suitable to lay directly underground in Existing trenches/RCC Ducts/Sleeves/Cable trays. Rate shall be excluding of cabling laying related civil work.

ITEM NO.171 Supplying, erecting & terminating XLPE armoured cable 1100 V. 3½ core 185 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-22

ITEM NO.172 Supplying, erecting & terminating XLPE armoured cable 3½core 150 sq mm aluminium conductor with continuous 12.97sq mm (8 SWG) G.I. earth wire complete erected with glands &lugs, on wall/ trusses/pole or laid in provided trench/ pipe as perspecification no. CB-LT/AL CSR 7-1-21

ITEM NO.173 Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-34

ITEM NO.174 Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-33

ITEM NO.175 Supplying, erecting & terminating XLPE armoured cable 4 core6 sq mm copper conductor continuous 5.48 sq mm (12SWG) G.I. earth wire complete erected with glands & lugs, onwall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-32

ITEM NO.176 Supplying, erecting & terminating XLPE armoured cable 4 core4 sq mm copper conductor continuous 5.48 sq mm (12SWG) G.I. earth wire complete erected with glands & lugs, onwall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-31

CABLE TERMINATION (FOR XLPE / PVC CABLES)

ITEM NO.177 Supplying & erecting Siemens type brass cable glands for 2 to 4 core 2.5 sq mm /2 to 4 core 4 sq mm /2 core 6 sq mm for PVC armoured cable as per specification No. CB-GL CSR 7-7-1

ITEM NO.178 Supplying & erecting Siemens type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for PVC armoured cable as per specification No. CB-GL CSR 7-7-2

ITEM NO.179 Supplying & erecting Siemens type brass cable glands for 3 to 4 core 16 sq mm /3 to 4 core 25 sq mm /3 core 35 sq mm for PVC armoured cable as per specification No. CB-GL CSR 7-7-3

ITEM NO.180 Supplying & erecting Siemens type brass cable glands for 3½ core 150 sq mm for PVC armoured cable as per specification No. CB-GL CSR 7-7-9

ITEM NO.181 Supplying & erecting Siemens type brass cable glands for 3½ core 185 sq mm for PVC armoured cable as per specification No. CB-GL CSR 7-7-10

ITEM NO.182 Supplying & erecting crimping type aluminium lugs for cable 150 sq mm complete as per specification No. CB-CL/AL CSR 7-10-8

ITEM NO.183 Supplying & erecting crimping type aluminium lugs for cable 185 sq mm complete as per specification No. CB-CL/AL CSR 7-10-9

ITEM NO.184 Supplying & erecting crimping type copper lugs for cable upto 16 sq mm complete as per specification No. CB-CL/CU CSR 7-9-1

ITEM NO.185 Providing & erecting epoxy outdoor/indoor end termination kit for LT PVC armoured cable 185 to 300 sq mm. cable, with necessary material as per specification No. CB-JT/LT CSR 7-4-11

EARTHING (EA)

ITEM NO.186 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification No. EA-EP CSR 9-1-4

ITEM NO.187 Providing earthing with Copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg of maintenance free earth conductivity enhancing mineral earthing compound complete with all materials, testing & recording the results as per specification no ESE -LA CSR 9-1-6

ITEM NO.188 Supplying & laying (including excavation) 15 cm dia RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 cm below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). CSR 7-6-5

ITEM NO.189 Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). CSR 7-6-7

ITEM NO.190 Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). ( Strip size = 25x3 mm ) CSR 9-2-3

DG SET & ATS

ITEM NO.191 Supplying, Erecting and Commissioning of Diesel generatingset with alternator of 20 kVA output continuous rating, 3Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled /liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours,alongwith standard accessories, self excited self regulated,screen protected alternator with static excitation system runningat 1500 RPM as per IS 4722-1968 with voltage regulation +/- 5%. Both the engine and alternator direct coupled on a commonfabricated steel base frame and mounted on anti vibratring padswith standard control panel comprising meters, switchgears,indicators connected with suitable wires/cables, the complete setenclosed in composite Acoustic enclosure as fully assembledintegral unit made of 16 SWG CRCA Sheet, sound absorbingmaterial to restrict sound level upto 75 dB at 1.0 m, providedwith first filling of oil, diesel etc. and obtaining necessaryapproval from Electrical Inspector as per specification no. GENDG CSR 11-1-5

ITEM NO.192 Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for Diesel Generating Set of 20 kVA capacity Single/Three phase,230/415 Volts, 50Hz A.C. with all standard features, safeties etcas per specification no. GEN-AMF. CSR 11-2-4

ITEM NO.193 Supplying and erecting approved make ON LOAD Four Pole Automatic Transfer Switch suitable for 440V, 50 Hz, 100A capacity conforming to IEC: 60947-1 & IEC: 947-6-1/ IS: 13947-1, with Enclosure, automatic/manual inbuilt Time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron frame and connected with provided leads. CSR 5-1-33

INVERTER & BATTERY SYSTEM

ITEM NO.194 Supplying & erecting On line UPS pure sine wave of 5 Kva capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup, as per specification No. AP-UPS CSR 3-7-4

ITEM NO.195 Supplying and erecting 12 V/200AH TUBULAR Battery with battery terminal wire, duly charged complete with 36 months warranty complete CSR 3-8-6

Indoor & Outdoor LED Fittings (FG-IDF/LED), FAN, EXHAUST FAN

ITEM NO.196 Supplying and erecting square shaped CRCA / die-cast aluminium powder coated housing LED Panel light 600X600mm / 300X1200mm of PREMIUM RANGE suitable for upto 45 to 48 W with provision for plane front frame with translucent cover fixed to the housing complete. CSR 2-1-11

ITEM NO.197 Supplying and erecting LED square / circular 13 to 15W down lighter having pressure die-cast aluminum housing, opal translucent cover,mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete CSR 2-1-4

ITEM NO.198 Supplying and erecting LED Flood light fitting of 30-40W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2 CSR 2-5-12

ITEM NO.199 Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete. CSR 2-1-22

ITEM NO.200 Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6 m in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC CSR 2-9-1

ITEM NO.201 Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FG-ODF/PTL CSR 2-6-3

ITEM NO.202 Supplying and erecting Gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12W LED lamp on provided pipe as per specification No. FG-ODF/GLT CSR 2-6-1

ITEM NO.203 Supplying, installing, testing and commissioning solar street light pole comprising of 14W LED fitting, 12V 36Ah maintenance free lithium battery, min. 75Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height al ong with brackets, foundation, earthling and necessaryaccessories complete. Specification no. ESD-SOL-STL ( with 5 years warrantee ) CSR 4-3-12

ITEM NO.204 Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. CSR 2-13-5

ITEM NO.205 Supplying and erecting regular/ standard model Ceiling fan of 1400 mm. sweep complete erected in position as per specifcation no. FG-FN/CF CSR 2-12-3

ITEM NO.206 Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. CSR 2-13-3

ITEM NO.207 Supplying and erecting ‘B’ grade G.I.pipe/M.S. pipe down rod duly painted for fan complete erected with PVC two core flexible cable 24/0.2 mm copper PVC wire. (2 METER EACH) CSR 2-13-6

ITEM NO.208 Supplying and erecting fresh air cum exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner CSR 2-12-14

ITEM NO.209 Supplying and erecting 2 x 36 / 40W FTL corrosion proof capsule type in non-corrosive polycarbonate housing and prismatic polycarbonate cover with individual high power electronic ballast saving Power factor >0.9 and working voltage range of 170 - 270V AC, IP 65 protection suitable for cold storage areas to be fixed in false ceiling or at ceiling or on wall complete. CSR 2-3-1

ITEM NO.210 Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface CSR 2-1-16

SOLAR ROOFTOP SYSTEM

ITEM NO.211 Supply, Installation, commissioning, design, engineering, procurement, suppy of grid-connected rooftop solar photovoltaic (PV) system of capacity 25kw. This includes all necessory equipment required for satifactory installation & operation of the system such as- -Solar PV module, -Grid -connected inverter/s, -Elevated module mounting structure/s, -AC/DC juction boxes, if applicable, -AC & DC cables, -Installation accessories etc. -Appropriate lightning protection sytemCP MR

FIRE ALARM ACCESSORIES (FF-FAAS) (Addressable)

ITEM NO.212 Supplying, erecting, testing and commissioning Manual Call Point (Pill box) with break glass push button in metal enclosure complete as per specification No. FF-FAAS/MCP CSR 13-8-5

ITEM NO.213 Supply and erecting hooters with CRCA enclosure complete as per specification No. FF-FAAS/HTR CSR 13-8-6

ITEM NO.214 Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FFFAAS/FACP CSR 13-8-12

ITEM NO.215 Supplying and erecting XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling as per specification No. CB-LT/CU CSR 13-8-8

PUBLIC ADDRESS SYSTEM (PAS)

ITEM NO.216 Supplying, erecting, testing and commissioning amplifier 120 W for Public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply as per specification No. FFPA/ AFR CSR 13-9-1

ITEM NO.217 Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification No. FFPA/ SOC CSR 13-9-2

ITEM NO.218 Supplying, erecting, testing and commissioning microphone as per specification No. FF-PA/MIC CSR 13-9-3

ITEM NO.219 Supplying erecting, testing to 2 core shielded Microphone cable as per specification No. FF-PA/MCC CSR 13-9-6

ITEM NO.220 Supplying & erecting ISI mark Rigid Steel conduit 16 SWG 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.3 CSR 1-1-1

FIRE FIGHTING

ITEM NO.221 Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 900 LPM at 40 m Head, 12.5 HP (10 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP CSR 13-4-4

Flow Rate- 900LPM

ITEM NO.222 Supplying & installing gun metal gate valve of size 25mm dia as per specification No. FF-VL/GV CSR 13-6-28

ITEM NO.223 Supplying and installing double flange NRV of size 100 mm dia as per specification No. FF-VL/NRV CSR 13-6-20

ITEM NO.224 Supplying & Installing cast iron double flange butterfly valve of size 100 mm dia. as per specification No. FF-VL/BFV CSR 13-6-16

ITEM NO.225 Providing and fixing gun metal ball valves confirming to IS 1703 with threaded/flanged joints complete with nuts, bolts, gaskets etc. MR

25mm Screwed ends

ITEM NO.226 Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG CSR 13-7-14

ITEM NO.227 Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 32m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification No. FF-FFA/HV CSR 13-7-2

ITEM NO.228 Providing and fixing standard firemans axe with heavy rubber handle. MR

ITEM NO.229 Providing Round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook. CSR 10-2-24

FIRE FIGHTING PIPES

ITEM NO.230 Supplying and installing G.I.pipe above ground of ‘C’ class ERW with necessary fittings as per specification no. FF-PP CSR 13-5-6

100mm dia

FIRE EXTINGUISHER

ITEM NO.231 Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall. CSR 10-2-36

ELECTRICAL PANEL (PLUMBING PUMP PANEL)

PANEL

ITEM NO.232 Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as directed. CSR 6-1-1

INCOMER

ITEM NO.233 Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. CSR 6-5-7

ITEM NO.234 Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification No. SW-SWR/MCB CSR 5-3-1

ITEM NO.235 Providing and erecting L.T. Current Transformer with ba primary 50/5 to 1000/5 ratio with 15VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. CSR 6-5-2

STARTRERS

ITEM NO.236 Supplying and erecting fully Automatic star/delta starter suitable for 12.5 H.P. to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. CSR 12-4-4

WIRES/ CABLES

ITEM NO.237 Supplying, erecting & terminating PVC armoured cable 4 core 10 sq mm copper conductor continuous 5.48 sq mm (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-33

ITEM NO.238 Supplying, installing, testing and commissioning of INLINE / PROPELLER FANS suitable for installing in any position in vertical or horizontal ducts. The casing shall be double skin, internally acoustically lined and constructed of galvanised steel. The fan shall be DIDW with forward curve impeller fitted with maintenance free external rotor motor. The motor shall be suitable for 220±10% volt single phase 50 cycles AC supply. All units shall be complete with duct flexible connector and volume control damper. All necessary power cabling to be included in the cost.

300 cfm Inline exhaust fans (Toilet) MR

300 cfm Inline exhaust fans (Pump Room) MR

100 cfm Inline exhaust fans (Toilet) MR

SHEET METAL WORK

ITEM NO.239 Supply, Fabrication, installation and testing of sheet metal ducts in accordance with the approved shop drawings and as required by the specifications. The item rate shall include the cost of supporting arranement / structure as per technical specification. MR

24 gage gavanised sheet steel ( upto 750mm )

ITEM NO.240 Supply, installation, testing and balancing of Air Grilles without volume control dampers for return/exhaust air in accordance with the approved shop drawings and specifications. MR

150mmx 150mm toilet exhuast grille

AIR-CONDITIONS

AUDITORIUM AREA : -

ITEM NO.241 Supplying, installing, testing & commissioning cassette type variable speed inverter technology split room airconditioning unit 4 TR capacity 230V /415 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A & copper condenser coil at position as with provided copper piping and drainage pipe. CSR 3-2-25

TEM NO.242 Supplying, installing, testing and commissioning cassette type variable speed inverter technology split room airconditioning unit 2 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 230/250 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A and copper condenser coil at position as per specification with provided copper piping and drainage pipe. CSR 3-2-22

ITEM NO.243 Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification no. APAC/ SAC CSR 3-2-8

ITEM NO.244 Supplying, laying / fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 19.1 mm & 9.5dia (OD) for liquid line / suction line supply and returnpiping of suitable gauge ( hard drawn copper pipe for liquidmain line and for refrigerant ) along with necessarysupports, hangers, clamps, vibration isolators and fittingssuch as bends, tees, valves, gauges, strainers with insulationof 9 mm thick elastomeric nitrile rubber along withapplication of multicoating suitable for use with VRV /VRF piping for protection against mechanical damages,fungal growth, flame spread, water permeance and ultraviolet radiations complete with OEM standards of VRV /VRF air conditioning system.CSR 3-11-97

TEM NO.245 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-94

ITEM NO.246 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 19 mm for solar water heater system. CSR 4-2-17

ITEM NO.247 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar water heater system. CSR 4-2-14

ITEM NO.248 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system CSR 3-11-96

ITEM NO.249 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-94

ITEM NO.250 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater system. CSR 4-2-16

ITEM NO.251 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar water heater system. CSR 4-2-14

ITEM NO.252 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system CSR 3-11-95.

ITEM NO.253 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. 3-11-93

ITEM NO.254 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater system. CSR 4-2-15

ITEM NO.255 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 6 mm for solar water heater system. CSR 4-2-13

ITEM NO.256 Supplying and erecting UPVC reinforced flexible conduit 50 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.orced flexible conduit 50 CSR 1-2-5

ITEM NO.257 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater system. CSR 4-2-21

ITEM NO.258 Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. CSR 1-2-3

ITEM NO.259 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system. CSR 4-2-20

ITEM NO.260 Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. CSR 1-2-2

ITEM NO.261 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater system. CSR 4-2-19

HOLOGRAM AREA : -

ITEM NO.262 Supplying, installing, testing & commissioning cassette type variable speed inverter technology split room airconditioning unit 4 TR capacity 230V /415 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A & copper condenser coil at position as with provided copper piping and drainage pipe. CSR 3-2-25

ITEM NO.263 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.. CSR 3-11-93

ITEM NO.264 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-94

ITEM NO.265 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 19 mm for solar water heater system. CSR 4-2-17

ITEM NO.266 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar water heater system. CSR 4-2-14

ITEM NO.267 Supplying and erecting UPVC reinforced flexible conduit 50 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.orced flexible conduit 50 CSR 1-2-5

ITEM NO.268 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater system. CSR 4-2-21

ITEM NO.269 Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. CSR 1-2-3

ITEM NO.270 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system. CSR 4-2-14

SENIOR CITIZEN AREA : -

ITEM NO.271 Supplying, installing, testing & commissioning cassette type variable speed inverter technology split room airconditioning unit 4 TR capacity 230V /415 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A & copper condenser coil at position as with provided copper piping and drainage pipe. CSR 3-2-25

ITEM NO.272 Supplying, installing, testing & commissioning cassette type variable speed inverter technology split room airconditioning unit 4 TR capacity 230V /415 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A & copper condenser coil at position as with provided copper piping and drainage pipe. CSR 3-2-23

ITEM NO.273 Supplying, laying / fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 19.1 mm & 9.5dia (OD) for liquid line / suction line supply and returnpiping of suitable gauge ( hard drawn copper pipe for liquidmain line and for refrigerant ) along with necessarysupports, hangers, clamps, vibration isolators and fittingssuch as bends, tees, valves, gauges, strainers with insulationof 9 mm thick elastomeric nitrile rubber along withapplication of multicoating suitable for use with VRV /VRF piping for protection against mechanical damages,fungal growth, flame spread, water permeance and ultraviolet radiations complete with OEM standards of VRV /VRF air conditioning system.CSR 3-11-97

ITEM NO.274 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-94

ITEM NO.275 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 19 mm for solar water heater system. CSR 4-2-17

ITEM NO.276 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar water heater system. CSR 4-2-14

ITEM NO.277 Supplying and erecting UPVC reinforced flexible conduit 50 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.orced flexible conduit 50 CSR 1-2-5

ITEM NO.278 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater system. CSR 4-2-21

ITEM NO.279 Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. CSR 1-2-3

ITEM NO.280 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system. CSR 4-2-20

SCIENCE CENTER AREA : -

ITEM NO.281 Supplying, installing, testing and commissioning cassette type variable speed inverter technology split room air conditioning unit 3 TR capacity having ISEER maximum 4.50, suitable to operate on 230V /415 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A & copper condenser coil at position with provided copper piping and drainage pipe. csr 3-2-23

ITEM NO.282 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-97

ITEM NO.283 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-94

ITEM NO.284 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 19 mm for solar water heater system. CSR 4-2-17

ITEM NO.285 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar water heater system. CSR 4-2-14

ITEM NO.286 Supplying and erecting UPVC reinforced flexible conduit 50 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.orced flexible conduit 50 CSR 1-2-5

ITEM NO.287 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater system. CSR 4-2-21

ITEM NO.288 Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. CSR 1-2-3

ITEM NO.289 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system. CSR 4-2-20

CHILDREN PLAY AREA : -

ITEM NO.290 Supplying, installing, testing and commissioning cassette type variable speed inverter technology split room air conditioning unit 3 TR capacity having ISEER maximum 4.50, suitable to operate on 230V /415 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A & copper condenser coil at position with provided copper piping and drainage pipe. csr 3-2-23

ITEM NO.291 Supplying, laying / fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 19.1 mm & 9.5dia (OD) for liquid line / suction line supply and returnpiping of suitable gauge ( hard drawn copper pipe for liquidmain line and for refrigerant ) along with necessarysupports, hangers, clamps, vibration isolators and fittingssuch as bends, tees, valves, gauges, strainers with insulationof 9 mm thick elastomeric nitrile rubber along withapplication of multicoating suitable for use with VRV /VRF piping for protection against mechanical damages,fungal growth, flame spread, water permeance and ultraviolet radiations complete with OEM standards of VRV /VRF air conditioning system.CSR 3-11-97

ITEM NO.292 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-94

ITEM NO.293 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 19 mm for solar water heater system. CSR 4-2-17

ITEM NO.294 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC /copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar water heater system. CSR 4-2-14

ITEM NO.295 Supplying and erecting UPVC reinforced flexible conduit 50 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.orced flexible conduit 50 CSR 1-2-5

ITEM NO.296 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater system. CSR 4-2-21

ITEM NO.297 Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. CSR 1-2-3

ITEM NO.298 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system. CSR 4-2-20

B.T EXHIBITION HALL : -

ITEM NO.299 Supplying, installing, testing & commissioning cassette type variable speed inverter technology split room airconditioning unit 4 TR capacity 230V /415 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A & copper condenser coil at position as with provided copper piping and drainage pipe. CSR 3-2-23

ITEM NO.300 Supplying, installing, testing and commissioning cassette type variable speed inverter technology split room airconditioning unit 2 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 230/250 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A and copper condenser coil at position as per specification with provided copper piping and drainage pipe. CSR 3-2-22

ITEM NO.301 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-97

ITEM NO.302 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-94

ITEM NO.303 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 19 mm for solar water heater system. CSR 4-2-17

ITEM NO.304 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar water heater system. CSR 4-2-14

ITEM NO.305 Supplying and erecting UPVC reinforced flexible conduit 50 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.orced flexible conduit 50 CSR 1-2-5

ITEM NO.306 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater system. CSR 4-2-21

ITEM NO.307 Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. CSR 1-2-3

ITEM NO.308 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system. CSR 4-2-20

PAINTING & SCULPTURE HALL : -

ITEM NO.309 Supplying, installing, testing & commissioning cassette type variable speed inverter technology split room airconditioning unit 4 TR capacity 230V /415 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A & copper condenser coil at position as with provided copper piping and drainage pipe. CSR 3-2-23

ITEM NO.310 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 9 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-97

ITEM NO.311 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-94

ITEM NO.312 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 19 mm for solar water heater system. CSR 4-2-17

ITEM NO.313 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar water heater system. CSR 4-2-14

ITEM NO.314 Supplying and erecting UPVC reinforced flexible conduit 50 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.orced flexible conduit 50 CSR 1-2-5

ITEM NO.315 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater system. CSR 4-2-21

ITEM NO.316 Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. CSR 1-2-3

ITEM NO.317 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system. CSR 4-2-20

LIBRARY AREA : -

ITEM NO.318 Supplying, installing, testing & commissioning cassette type variable speed inverter technology split room airconditioning unit 4 TR capacity 230V /415 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A & copper condenser coil at position as with provided copper piping and drainage pipe. CSR 3-2-23

ITEM NO.319 Supplying, installing, testing and commissioning cassette type variable speed inverter technology split room airconditioning unit 2 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 230/250 V, 50 cycles, AC supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant R32/R410A and copper condenser coil at position as per specification with provided copper piping and drainage pipe. CSR 3-2-22

ITEM NO.320 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 9 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-97

ITEM NO.321 Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liqud main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system. CSR 3-11-94

ITEM NO.322 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 19 mm for solar water heater system. CSR 4-2-17

ITEM NO.323 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 9 mm for solar water heater system. CSR 4-2-14

ITEM NO.324 Supplying and erecting UPVC reinforced flexible conduit 50 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.orced flexible conduit 50 CSR 1-2-5

ITEM NO.325 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater system. CSR 4-2-21

ITEM NO.326 Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. CSR 1-2-3

ITEM NO.327 Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system. CSR 4-2-20

PATR T - B MEP

Item No.01 Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) SSR 27.15

Item No.02 Providing and applying one pack bonding coat between concrete members like RCC slabs, columns, beams, chajjas, pardis etc and cement mortar plaster using Hack Aid Plast of approved make & approved by Engineer in charge. Clean the concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a clean surface. Apply Hack Aid Plast of approved make & approved by Engineer in charge by spray on the entire concrete surface. Provide a lean cement - sand dash coat over the same. Allow the dash coat to set foraround 24 hours. Further plastering as per specifications can continue. SSR - 50.09

Item No.03 Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed / fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab.MR

Item No.04 Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Signor equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR - 32.31

Item No.05 Providing and applying 2 coats of 100% Pure acrylic low VOC and APEO & HCHO free water based paint of approved colour that belongs to class1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of up to 1mm. Paint should have an oustanding wash ability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic co polymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge .SSR - 48.11

Item No.06 Providing and fixing Indian teak wood planking 25mm thick for flooring plained on both sides, tongued and grooved including scaffolding, ifnecessary, and one coat of primer etc. complete. SSR - 37.01

Item No.07 Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm (50mm x 50mm) with 12mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 129231990, laminated (gypsum finish as per dwg) on both sides, Nova teak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete. SSR - 39.73

Item No.08 Providing and fixing 3.5 to 4mm thick Veneer finish wall Panaling made out of 50x25mm (finished size) C.C.T.W.frame work or size of 600x600mm center or as per site condition covered by 6mm (12mm )thick marine plywood of the generally confiriming toI:S710-1980 finished with 3.5 to 4mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with anti termite treatment etc.to plywood and wood work with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer In charge. SSR - 37.26

Item No.09 Providing and fixing Indian teak wood plank wall 20 mm thick plain under side tongued and grooved including iron screws, scaffolding, ifnecessary, including one primer coat on under side and one coat of coal tar on upper side etc. complete. SSR - 37.05

Item No.10 Providing and applying french polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed. SSR - 34.06

Item No.11 Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc.complete. (excluding frame work, runners and mild steel suspenders). SSR - 38.17

Item No.12 Providing and fixing in position powder coated aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineer in charge with all necessary alluminium sections including necessary fixtures and fastening such as 5mm thick clear float glass (8mm toughened Glass) etc.complete. SSR 39.53

Item No.13 Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineer in charge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass (8mm toughened Glass) etc.complete.b) With powder coating Note While arriving at the rate of item of item weight at 6.90 Kilogram/Square Metre is considered. SSR 39.55

Item No.14 Providing & Fixing in position, 1000mm wide Auto-glow Aluminium extruded strips on auditorium steps as per Design & Instructions & Complete in all aspects. Make Pic coloor Nexus SSR - 51.14

Item No.15 Providing & Fixing in position, Acoustical Panelling made from Printed Fabric wrapped Compressed polyester fibre non woven 9mm panels on, 50x50mm sal-wood frame of 600x600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete. SSR - 51.01

Item No.16 Providing and fixing Modular false ceiling of 600x600 mm center to center and 13mm thick square mineral fiber board (perforated) to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T2”x1½” (50mmx40mm) weighing 0.39Kilogram / mat 60cms center center and fixed with ½”x½” (15x15mm) flanges weighing 0.19Kilogram/m suspended on 6mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams includin grounding of the edges with alluinium T of 2”x1½”(50mmx40mm) weighing 0.39Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. SSR - 38.52

Item No.17 Providing and fixing teak wood cover moulding 35x20 mm over doors and windows (column and false ceiling) in the required shape and size as per drawing, including all mouldings and finishing with french polishing etc. complete. SSR - 39.93

Item No.18 Providing and fixing teak wood cover moulding 70x20 mm over doors and windows (column and false ceiling) in the required shape and size as per drawing, including all mouldings and finishing with french polishing etc. complete. SSR - 39.93

Item No.20 Providing and fixing 900mm highS.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete SSR - 40.07

Item No.21 Providing and fixing 50 mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete SSR - 51.111

Item No.22 Providing and fixing 50x50mm Aluminium Framing with 18/25mm Backply for raised area as per mentioned in drawingMR

Item No.23 Providing and fixing 3/4mm Tounge and Groove Joint two layer engineered wooden flooring as specified by Architect.MR

Item No.24 25mm ply with veneer with app. PolishMR

Item No.25 25mm ply with veneer with app. Duco paintMR

Item No.26 Vinyl Printed Graphics over Finished wallMR

Item No.27 Providing and fixing wooden laminated Skirting over Ceramic tile skirting at backMR

Item No.28 FibreGlass Composite Column Cladding / FRPMR

Item No.29 Crossword Table ChairsMR

Item No.30 Juke Box StoolMR

Item No.31 FRP TREE - chavdiMR

Item No.32 wooden stool - chavdiMR

Item No.33 wooden chair - stageMR

Item No.34 Wooden Library Table with Polish as per sampleMR

Item No.36 Wooden Storage as per detail dwg finished with app. Polish as per sampleMR

Item No.37 wooden decorative border photo frames with app. PolishMR

Item No.38 Librarian Desk - wooden table with app. Polish as per designMR

Item No.39 MS Flat Plate - curvilinear as per designMR

Item No.40 FRP - Statues / Faces hangedMR

Item No.41 MS BOX SECTION powder coated as per design, hanged with 15mm MS rod from Ceiling complete with all fittings, welding etc.MR

Item No.42 Providing and fixing Indian teak wood with engrave as per design on wall 20 mm thick plain under side including iron screws, scaffolding, ifnecessary, including one primer coat on under side and one coat of coal tar on upper side etc. complete.MR

Item No.43 Wallpaper Printed over Finished wallMR

Item No.44 Automated Track and CurtainMR

Item No.45 MS STAIRCASE for Loft AccessMR

Item No.46 CatWalk - MS Grid Fabrication at 600 x 600 mm C/C with MS Flat Plate Platform to walkMR

Item No.47 Providing and fixing Concrete Finish Fibre Board Panels (1200 X 2400mm) on wall with groove as per Design given by ArchitectMR

Item No.48 Providing and fixing in White LED Strip Profile Light flush to surface (wall and falseceiling) as designed by the ArchitectMR

Item No.49 Providing and fixing Canvas / Fabric Printed Picture of Balasaheb Thackeray as per GraphicsMR

Item No.50 FRP design as per Architect and Vendor Specification / DesignMR

Item No.51 Providing and fixing MS Box Section in curvilinear form hanged from Slab bottom as per design given by the Architect with all hardwares, powder coating, etc completeMR

Item No.52 Backlit Stretch Fabric with print as per theme given by the graphic designer or ArchitectMR

Item No.53 Providing and fixing 12mm thik Acrylic boxing with framing (50 x 50mm), with backlit and provision of LED screen aboveMR

Item No.54 Providing and fixing Ply Table with 3.5 to 4mm thick Veneer finish over 19mm thick marine plywood of the generally confiriming toI:S710-1980 finished with 3.5 to 4mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with anti termite treatment etc.to plywood and wood work with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer In chargeMR

Item No.55 Providing and fixing of Chair with SS base fixed to wooden raised panel belowProviding and fixing of Chair with SS base fixed to wooden raised panel belowMR

Item No.56 Providing and fixing of MS Flat Plate chequred flush to tiles bolted into base PCC.MR

Item No.57 Providing and fixing of LED flexible profile lights flush to FRPMR

Item No.59 Providing and fixing 3mm Homegenous Vinyl flooring - color, design as per Architect, including installation and completeMR

Item No.60 Designing, providing and fixing printed Vinyl with color, design as per Architect / Graphics Designer or theme based, including installation and completeMR

Item No.61 Providing and fixing Ply Table with 3.5 to 4mm thick Veneer finish over 19mm thick marine plywood of the generally confiriming to I:S710-1980 finished with 3.5 to 4mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with anti termite treatment etc.to plywood and wood work with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer In charge. MR

Item No.65 Jungle Gym Play equipments (slide, steps, climbing), designed by the Vendor in Softwood / Pinewood finish with app. Clear polish as per approval.MR

Item No.66 Soft Cusion Pebbles to sit of 350 and 500mm dia of thikness 50mmMR

Item No.67 Mushroom shaped Puffy for seating of 400mm dia and 40mm heightMR

Item No.68 Ceiling Hanged Cloud Shaped LightsMR

Item No.69 Fibre Optic LightsMR

Item No.70 3D laser cut Sunboard with Vinyl graphics over it as per theme by the Graphics Designer / ArchitectMR

Item No.71 Providing and fixing Curtains with SS Curtain Rod with hardware and complete as per size givenMR

Item No.72 3 seater Sofa - 1.9 x 0.725 x 0.45 mMR

Item No.73 .single seater Sofa - 0.75 x 0.725 x 0.45 mMR

Item No.74 centre table - 0.6 x 1.2 x 0.4 mMR

Item No.75 side table - 0.6 x 0.6 x 0.4 mMR

Item No.76 wardrobe unit - wooden finish with app. Polish - 0.6 x 0.6 x 2.4 mMR

Item No.77 photo booth - wooden finish with app. Polish - 1.2 x 1.8 x 2.1mMR

Item No.78 Artifacts table - wooden finish with app. Polish - 1.2 x 0.6 x 1mMR

Item No.79 Table as per design - wooden finish with app. Polish - 3 x 0.6 x 0.45mMR

Item No.80 Table as per design - wooden finish white duco paint / Polish - 1.8 x 0.75 x 1.05mMR

Item No.81 Table as per design - wooden finish white duco paint / Polish - 0.45 x 0.45 x 1.05mMR

Item No.82 Table as per design - wooden finish white duco paint / Polish - 1.35 x 1.35 x 1.5mMR

Item No.83 Paitings - 0.9 x 1.5mMR

Item No.84 Suspended Name tages - Acrylic / MDF laser cut with duco paintMR

Item No.85 Name tages / Frames - Printed Vinyl over Sunboard / Acrylic as per graphic designMR

Item No.86 Periscope Table as per design - wooden finish white duco paint / Polish - 0.5 x 0.5 x 0.9mMR

Item No.87 Supplying, erecting, testing, and commissioning of digital active 60A harmonic filter cum power conditioner, with digital closedloop active filter with source current sensing, 32 bit digital signalprocessing with less than 1 millisecond response time, high speedIGBTs in power circuit with necessary CTs to be mounted onexisting cable/bus and shunted to supply along with digital displayshowing voltage, current, frequency, kW, kVA, kVAr , PF, VTHD,ITHD and waveform with alarm for 3 phase 4 wire system as perspecification No. CP-ED/DAHF CSR 6-7-3

Item No.88 Supplying and erecting 40 kVAr, 440 V 3 phase, 50 Hz., thyristerswitched micro APFC passive filter panel, consisting of suitablesteps of APP type capacitor units with harmonic filter reactors, as perspecification no CP-ED/APFC CSR 6-7-7

Item No.89 S u p p l ying and erecting 100 kVAr, 3 phase, 50 Hz., capacitor dutycontactor with de-latching mechanism microprocessor APFCcontroller with MPP / APP type capacitor with 525 V and havingminimum overcurrent capacity of 1.8 In, peak inrush current capacity300 In and minimum life 150000 hours with , consisting of suitablesteps of MPP / APP type capacitor units with detuned aluminiumfilter 7% reactors with circuit breaker as main incomer and MCCB foreach branch protection, as per specification no CP-ED/APFC CSR 6-7-18

Item No.90 Supplying & erecting inline cut point end pole D. P. Structure for11/0.415 kV, 63 kVA Transformer with R.S.J. Pole 2 Nos. of size100 x 116 mm x 11 Mtr. Long with suitable Distribution Box ofC.R.C.A. Sheet 16 SWG with 4 Pole MCCB 100 Amps as incomer &6 Nos. 63 Amps kitkat /MCCB for outgoing circuits. TransformerD.P. Structure includes the A. B. Switch 200 Amps, D.O. fuse Set &L.A. Set. 2 Nos. Top channel of size 100 mm x 50 mm for erection ofA.B. Switch & 2 Nos. Base channel of size 100 mm x 50 x mm forerecting Transformer. Channel of size 75 x40 mm for erecting D.O.Fuse Set, L.A., A.B. Switch handle etc. Angle of size 50 x 50 x6 mmfor erecting Distribution Box, Transformer Belt etc.as per drawing(min. 176 Kg. iron work ) with necessary clamps, Nut-bolts. veecross arm, top clip, insulators etc. complete with caution board &barbed wire. D.P. Structure shall be erected in c.c. foundationcomplete .CSR 8-4-21

Item No.91 Supplying & erecting triple pole and neutral distribution board(TPNDB) with door surface/ flush mounted suitable for 3 poleMCCB as incomer & outgoing SP MCB (36 poles) or TP MCBof 12 ways (36 poles) on iron/ GI frame. (vertical busbar type) asper specification no. SW-SWR/MCBDB1 CSR 5-4-27

Item No.92 Supplying & erecting on line UPS pure sine wave of 10kVA capacity complete with standard features, along withnecessary SMF batteries for 30 mins battery backup, as perspecification no. AP-UPS CSR 3-7-7

Item No.93 Supplying and erecting 12 V/200Ah tubular battery withbattery terminal wire, duly charged complete with 36months warranty complete CSR 3-8-6

Item No.94 Supplying, erecting & terminating XLPE armoured cable 3½core240 sq. mm. copper conductor with continuous 12.97 sq. mm. (8SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/AL CSR 7-2-28

Item No.95 Supplying, erecting & terminating XLPE armoured cable 3½ core35 sq. mm. copper conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/AL CSR 7-2-21

Item No.96 Supplying, erecting & terminating XLPE armoured cable 4 core 16sq. mm. copper conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU CSR 7-2-34

Item No.97 Supplying, erecting & terminating XLPE armoured cable 4 core 10sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG)G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU CSR 7-2-33

Item No.98 Supplying, erecting & terminating XLPE armoured cable 3 core 4sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG)G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU CSR 7-2-15

Item No.99 Supplying, erecting & terminating XLPE armoured cable 3½core240 sq. mm. copper conductor with continuous 12.97 sq. mm. (8SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/AL CSR 7-2-28

Item No.100 Supplying, erecting & terminating XLPE armoured cable 3½ core35 sq. mm. copper conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/AL7-2-21

Item No.101 Supplying, erecting & terminating XLPE armoured cable 4 core 16sq. mm. copper conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU CSR 7-2-34

Item No.102 Supplying, erecting & terminating XLPE armoured cable 4 core 10sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG)G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU CSR 7-2-33

Item No.103 Supplying, erecting & terminating XLPE armoured cable 3 core 4sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG)G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU CSR 7-2-15

Item No.104 Supplying & erecting triple pole and neutral distribution board(TPNDB) with door surface/ flush mounted suitable for 3 poleMCCB as incomer & outgoing SP MCB (36 poles) or TP MCBof 12 ways (36 poles) on iron/ GI frame. (vertical busbar type) asper specification no. SW-SWR/MCBDB1 CSR 5-4-27

Item No.105 Providing & erecting 3 Pole MCCB upto 100A, 415V, with shortcircuit rating 25 kA (Ics=100% of Icu ),adjustable thermal(overload) setting and fixed magnetic setting with provided leads,provision for installation of shunt/ UV/ trip alarm contact andMCCB should have phase barriers both sides, in provided enclosureon iron /GI frame as per specification no. SW-SWR/MCCB CSR 5-5-1

Item No.106 Supplying and erecting single pole and neutral distribution board(SPNDB) surface/flush mounted with 2 ways for incoming and10 ways for outgoing SP MCB’s on iron/ GI frame as perspecification no. SW-SWR/MCBDB CSR 5-4-16

Item No.107 Supplying and erecting metal clad distribution board 240V, 8 way,16A per way & neutral bar connector complete erected on iron /GI frame as per specification no. SW-SWR/MDB CSR 5-2-5

Item No.108 Supplying and erecting all aluminium stranded conductors7/3.10 mm. complete. (Ant.) (145.0 kg/km) as per specificationNo. OH-CON/AAC CSR 8-5-5

Item No.109 Supplying and erecting all aluminium stranded conductors7/2.78 mm. complete. (Pansy) (115.8 kg/km) as per specificationno. OH-CON/AAC CSR 8-5-4

Item No.110 Supplying and erecting all aluminium stranded conductors7/2.48 mm complete. (lris) (91.8 kg/km) as per specification no.OH-CON/AAC CSR 8-5-3

Item No.111 Supplying and fixing wiremesh (Jali) cover suitable for fitting /fan or for any purpose, complete with necessary materials. The jalicover shall be made from good quality G.I. wire mesh size 25 x 25(mm) and made up of 14 SWG G.I. wire with side / supportingMS strips of suitable size. CSR 2-4-10

Item No.112 Supplying and erecting square shaped CRCA /die-castaluminium powder coated housing LED panel light (slimedge-lit) 600x600mm suitable for 36 W-40W with provision forplane front frame with translucent cover fixed to the housingcomplete. CSR 2-1-11

Item No.113 Supplying and erecting square / rectangular shaped CRCA /diecastaluminium powder coated housing LED panel (slimedge-lit) light suitable for 25 to 32W with provision for planefront frame with translucent cover fixed to the housing complete. CSR 2-1-10

Item No.114 Supplying and erecting LED square / circular 16 to 20W downlighter having pressure die-cast aluminium housing, opaltranslucent cover, mounting arrangement with board for surfacetype or spring loaded mounting clips for flush type complete. CSR 2-1-5

Item No.115 Supplying and erecting moon type decorative wall/ceilingmounted fixture including LED upto 12W circular/square typewith opaque diffuser and electronic driver including bracketcomplete. CSR 2-2-6

Item No.116 Providing earthing with copper earth plate size 60 x 60 x 0.315 cmwith funnel with a wire mesh for watering and brick masonry blockC.l. cover with minimum 25 kg Carbon based environment friendlyback fill Ground Enhancing compound complete with all materials,testing & recording the results as per specification no ESE -LA CSR 9-1-6

Item No.117 Supplying and erecting GI strip of required size used for earthing onwall and/or any other purpose with necessary GI clamps fixed onwall painted with insulating and non-corrosive bond in anapproved manner with required joints As per specification no. EAEP. CSR 9-2-8

Item No.118 Supplying, erecting & terminating XLPE unarmoured cable 1 core25 sq. mm. copper conductor complete erected with provided lugs,laid in provided control panel /distribution boards / pipe as perspecification no. CB-LT/CU CSR 7-2-1

TECHNOLOGICAL ITEMS : -

CHILDREN PLAY AREA : -

Item No.119 LG 32inch Commercial Display MR

Item No.120 Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 8GB DDR4Storage 240GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.121 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC AC-S6T Acoustic Coverage™Description 6.5-inch 2-way, 130° conical Surface Mount speakersComponents LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coilHF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coilFrequency Response 60 Hz–20 kHzRated Noise Power / Voltage 30 watts / 15.5 volts rmsMax O/P 101 dB SPL LTC / 107 dB SPL PeakImpedance 8ΩBroad-band Sensitivity 86 dB SPLCoverage Angle 130° conical (500 Hz–5 kHz)Directivity Factor, Rθ (Q) 6Directivity Index, Di 8 dB MR

Item No.122 Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Crown XLS 1502Description Two-channel, 525W @ 4Ω Class D Power AmplifierSensitivity 1.4VrmsFrequency Response +0dB, -1dBSignal to Noise >103dB (at .775Vrms, 6dB lower)Inter modulation Distortion < 0.3%Damping Factor > 200THD < 0.5%Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB MR

Item No.123 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.124 Cables / Connectors for the zoneMR

Item No.125 Technical Architecture DesignMR

Item No.126 Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos.MR

Item No.127 Asset Integration MR

Item No.128 Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

Item No.129 3D Animation , VFX, Sound MR

Item No.130 Integration / Installation MR

TENT PLAY AREA

Item No.131 24inch Dell Touch Screen MR

Item No.132 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.133 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC AC-S6T Acoustic Coverage™Description 6.5-inch 2-way, 130° conical Surface Mount speakersComponents LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coilHF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coilFrequency Response 60 Hz–20 kHzRated Noise Power / Voltage 30 watts / 15.5 volts rmsMax O/P 101 dB SPL LTC / 107 dB SPL PeakImpedance 8ΩBroad-band Sensitivity 86 dB SPLCoverage Angle 130° conical (500 Hz–5 kHz)Directivity Factor, Rθ (Q) 6Directivity Index, Di 8 dB MR

Item No.134 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.135 Cables / Connectors for the zone MR

Item No.136 Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results.MR

Item No.137 Game DevelopmentMR

Item No.138 Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

Item No.139 3D Animation , VFX, Sound MR

Item No.140 Integration / Installation MR

FOREST CAVE

Item No.141 55inch Samsung Capacitive TouchscreenMR

Item No.142 Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 8GB DDR4Storage 240GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.143 Supply and installation of Laser Projector with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Epson EB-L610ULight Source LaserProjection System 3LCD Technology, RGB liquid crystal shutterLCD Panel 0.67” (D10)Color Light Output 6,000 lumensWhite Light Output 6,000 lumensLCD Image Resolution WUXGA, 1920 x 1200, 16:10Colour Reproduction 30 bits, 1.07B Color (10+10+10)Throw Ratio 1.35 - 2.2:1Lensing Standard Optical f1.5-1.7 / 20mm - 31.8mmZoom Manual, Factor: 1 - 1.6 MR

Item No.144 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC AC-S6T Acoustic Coverage™Description 6.5-inch 2-way, 130° conical Surface Mount speakersComponents LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coilHF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coilFrequency Response 60 Hz–20 kHzRated Noise Power / Voltage 30 watts / 15.5 volts rmsMax O/P 101 dB SPL LTC / 107 dB SPL PeakImpedance 8ΩBroad-band Sensitivity 86 dB SPLCoverage Angle 130° conical (500 Hz–5 kHz)Directivity Factor, Rθ (Q) 6Directivity Index, Di 8 dB MR

Item No.145 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.146 Cables / Connectors for the zone MR

Item No.147 Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR

Item No.148 Cave Painting Game Development MR

Item No.149 Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use.MR

Item No.150 3D Animation , VFX, Sound MR

Item No.151 Integration / Installation MR

AR EXPERIENCES

Item No.152 7000 Lumen Epson Projector MR

Item No.153 Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M MotherboardRAM 16 GB Kingston DDR4 HyperX RAMStorage 256 GB SSDDisplay Adapter Nvidia GTX 1660 6GB VRAMNetwork Adapter Gigabit Ethernet LAN 10/100/1000HID Dell USB Keyboard + Mouse Combo MR

Item No.154 CameraMR

Item No.155 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC AC-S6T Acoustic Coverage™Description 6.5-inch 2-way, 130° conical Surface Mount speakersComponents LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coilHF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coilFrequency Response 60 Hz–20 kHzRated Noise Power / Voltage 30 watts / 15.5 volts rmsMax O/P 101 dB SPL LTC / 107 dB SPL PeakImpedance 8ΩBroad-band Sensitivity 86 dB SPLCoverage Angle 130° conical (500 Hz–5 kHz)Directivity Factor, Rθ (Q) 6Directivity Index, Di 8 dB MR

Item No.156 Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Crown XLS 1502Description Two-channel, 525W @ 4Ω Class D Power AmplifierSensitivity 1.4VrmsFrequency Response +0dB, -1dBSignal to Noise >103dB (at .775Vrms, 6dB lower)Inter modulation Distortion < 0.3%Damping Factor > 200THD < 0.5%Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB MR

Item No.157 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.158 Projector Mount MR

Item No.159 Cables / Connectors for the zoneMR

Item No.160 Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results.MR

Item No.161 Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos. MR

Item No.162 Asset Integration MR

Item No.163 Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

Item No.164 3D Animation , VFX, Sound MR

Item No.165 Integration / Installation MR

INTERACTIVE PAINTING AREA

Item No.166 Laser ProjectorMR

Item No.167 Projector Mount Spider Clamp MR

Item No.168 Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M MotherboardRAM 16 GB Kingston DDR4 HyperX RAMStorage 256 GB SSDDisplay Adapter Nvidia GTX 1660 6GB VRAMNetwork Adapter Gigabit Ethernet LAN 10/100/1000HID Dell USB Keyboard + Mouse Combo MR

Item No.169 Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 8GB DDR4Storage 240GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.170 43 inch Samsung Touch screen MR

Item No.171 Wifi Router MR

Item No.172 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC AC-S6T Acoustic Coverage™Description 6.5-inch 2-way, 130° conical Surface Mount speakersComponents LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coilHF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coilFrequency Response 60 Hz–20 kHzRated Noise Power / Voltage 30 watts / 15.5 volts rmsMax O/P 101 dB SPL LTC / 107 dB SPL PeakImpedance 8ΩBroad-band Sensitivity 86 dB SPLCoverage Angle 130° conical (500 Hz–5 kHz)Directivity Factor, Rθ (Q) 6Directivity Index, Di 8 dB MR

Item No.173 Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Crown XLS 1502Description Two-channel, 525W @ 4Ω Class D Power AmplifierSensitivity 1.4VrmsFrequency Response +0dB, -1dBSignal to Noise >103dB (at .775Vrms, 6dB lower)Inter modulation Distortion < 0.3%Damping Factor > 200THD < 0.5%Crosstalk At 1kHz: > 85dB, At 20kHz: > 55d BMR

Item No.174 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.175 Cables / Connectors for the zoneMR

Item No.176 Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results. MR

Item No.177 Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos. MR

Item No.178 Asset Integration MR

Item No.179 Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use. MR

Item No.180 3D Animation , VFX, Sound MR

Item No.181 Integration / Installation MR

MOTION TRACKING BIRD SANTUARY

Item No.182 Viewsonic UST ProjectorMR

Item No.183 Motion SensorMR

Item No.184 Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M MotherboardRAM 16 GB Kingston DDR4 HyperX RAMStorage 256 GB SSDDisplay Adapter Nvidia GTX 1660 6GB VRAMNetwork Adapter Gigabit Ethernet LAN 10/100/1000HID Dell USB Keyboard + Mouse ComboMR

Item No.185 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC AC-S6T Acoustic Coverage™Description 6.5-inch 2-way, 130° conical Surface Mount speakersComponents LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coilHF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coilFrequency Response 60 Hz–20 kHzRated Noise Power / Voltage 30 watts / 15.5 volts rmsMax O/P 101 dB SPL LTC / 107 dB SPL PeakImpedance 8ΩBroad-band Sensitivity 86 dB SPLCoverage Angle 130° conical (500 Hz–5 kHz)Directivity Factor, Rθ (Q) 6Directivity Index, Di 8 dBMR

Item No.186 Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Crown XLS 1502Description Two-channel, 525W @ 4Ω Class D Power AmplifierSensitivity 1.4VrmsFrequency Response +0dB, -1dBSignal to Noise >103dB (at .775Vrms, 6dB lower)Inter modulation Distortion < 0.3%Damping Factor > 200THD < 0.5%Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dBMR

Item No.187 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.188 Cables / Connectors for the zoneMR

Item No.189 Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results.MR

Item No.190 Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos.MR

Item No.191 Asset IntegrationMR

Item No.192 Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test.Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use.MR

Item No.193 5 Unique BirdsMR

Item No.194 Integration / InstallationMR

SOUNDS OF JUNGLE

Item No.195 Customised Hardware MR

Item No.196 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/10005.1 SoundCard MR

Item No.197 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.198 Cables / Connectors for the zoneMR

Item No.199 Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results.MR

Item No.200 Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos.MR

Item No.201 Asset IntegrationMR

Item No.202 Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test. Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use.MR

Item No.203 Content/soundMR

Item No.204 Integration / InstallationMR

SPACE SHUTTLE

Item No.205 65inch Commercial DisplayMR

Item No.206 TV MountMR

Item No.207 Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M MotherboardRAM 16 GB Kingston DDR4 HyperX RAMStorage 256 GB SSDDisplay Adapter Radeon WX 9100Network Adapter Gigabit Ethernet LAN 10/100/1000HID Dell USB Keyboard + Mouse Combo MR

Item No.208 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.209 Cables / Connectors for the zoneMR

Item No.210 Technical Architecture Design :It refers to the high level structures of a software system and the discipline of creating such structures and systems. Each structure comprises software elements, relations among them, and properties of both elements and relations. It functions as a blueprint for the system and the developing project, laying out the tasks necessary to be executed by the design teams.It is about making fundamental structural choices which are costly to change once implemented. Software architecture choices include specific structural options from possibilities in the design of software. For example, the systems that controlled the space shuttle launch vehicle had the requirement of being very fast and very reliable. Therefore, an appropriate real-time computing language would need to be chosen. Additionally, to satisfy the need for reliability the choice could be made to have multiple redundant and independently produced copies of the program, and to run these copies on independent hardware while cross-checking results.MR

Item No.211 Software Programming : It is the process of designing and building an executable computer program for accomplishing a specific computing task. Programming involves tasks such as: analysis, generating algorithms, profiling algorithms' accuracy and resource consumption, and the implementation of algorithms in a chosen programming language (commonly referred to as coding). The source code of a program is written in one or more languages that are intelligible to programmers, rather than machine code, which is directly executed by the central processing unit. The purpose of programming is to find a sequence of instructions that will automate the performance of a task (which can be as complex as an operating system) on a computer, often for solving a given problem. The process of programming thus often requires expertise in several different subjects, including knowledge of the application domain, specialized algorithms, and formal logic. It interfaces all the pages of the book in a interactive way, pages are combinations of static images and videos.MR

Item No.212 Asset IntegrationMR

Item No.213 Testing / Compilation : It is an investigation conducted to provide stakeholders with information about the quality of the software product or service under test. Software testing can also provide an objective, independent view of the software to allow the business to appreciate and understand the risks of software implementation. Test techniques include the process of executing a program or application with the intent of finding software bugs (errors or other defects), and verifying that the software product is fit for use.MR

Item No.214 Content - Animation / vfxMR

Item No.215 Integration / InstallationMR

SCIENCE CENTER ZONE : -

GLOBAL WARMING

Item No.216 Projector:BenQ LK953ST Projector MR

Item No.217 Computer for Dome (Interactive):i7 NUC, 256 GB SSD, 8GB RAM, 4K out MR

Item No.218 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.219 Computers for Cycles:Celeron NUC5CPYH,128GB SSD,4GB RAM MR

Item No.220 Cycles:Air Bike MR

Item No.221 Jumping pod:MR

Item No.222 Dell 24inch Display MR

Item No.223 LED Stripes:MR

Item No.224 LED SMPS:MR

Item No.225 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.12" Variable Intensity SpeakerSystem Type 12" Variable Intensity LoudspeakerDirect-radiating vented-bass fullrange loudspeaker systemComponents High-efficiency, high-power castframe 305-mm (12-inch) woofer with one 25.4-mm (1.0-inch) exit compression driver mounted to a small format Variably Intentsity |Multi-Angled Housing | Direct-radiating vented Frequency Response 45 Hz - 20 kHzPower Handling 250 W LTC / 1,000 W Peak Max O/P 122 dB SPL LTC / 128 dB SPL Peak Impedance 8Ω (Nominal) | 5.6Ω (Minimum) (17.5kHz)Beam - Long Throw (1-20 kHz) Horizontal : 60° (+38°, -5°) | Vertical : 70° (+35°, -15°)Beam - Short Throw (600Hz-20 kHz) Horizontal : 110° (+25°, -15°) | Vertical : 90° (+40°, -20°)Directivity Factor, Rθ (Q), 1.2-20 kHz 14.0 (+4.5, -4.0)Directivity Index, Di, 1.2-20 kHz 12.5 dB (+1.5 dB, -2.7 dB)MR

Item No.226 Dlink Switch 24 Port:MR

Item No.227 Resolume Lic:MR

Item No.228 Resolume Manager:i7 NUC, 256 GB SSD, 8GB RAM, 6port GCMR

Item No.229 Customised Hardware:MR

Item No.230 Cables / Connectors for the zone:MR

Item No.231 Reverse Equirectangular Application DevelopmentMR

Item No.232 Integration / InstallationMR

Item No.233 Equirectangular Video Production MR

GRAVITY

Item No.234 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.235 LG 65inch DisplayMR

Item No.236 Display Mount:MR

Item No.237 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.238 Computer for PhotoCapture:Celeron NUC5CPYH,128GB SSD,4GB RAMMR

Item No.239 Camera For PhotoCapture:Logitech C922MR

Item No.240 Enclosure For PhotoCapture:MR

Item No.241 TouchScreen Display:16" ViewsonicMR

Item No.242 Router:DlinkMR

Item No.243 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC CP8Configuration Two-way active loudspeakerLF Transducer: 8 in (203 mm), coneHF Transducer: 1.4 in (35.6 mm) compression driverFrequency Response (-6 dB) 56 - 20 kHzFrequency Range (-10 dB) 53 - 20 kHzNominal Coverage Angle: 90° AxisymetricMaximum Rated SPL1: 124 dBAC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 HzAC Power Consumption (1/8th Power): 100 VAC, 0.75A - 240VAC 0.31AMR

Item No.244 Dlink Switch 24 Port:MR

Item No.245 Weigh Sensor with Customised Hardware:MR

Item No.246 Cables / Connectors for the zone:MR

Item No.247 Multidisplay Application for Jump AnalysisMR

Item No.248 Photocapture / Alignment ApplicationMR

Item No.249 Integration / InstallationMR

Item No.250 Character Modelling ( Rigged + Light Baked )MR

Item No.251 AnimationMR

SOLAR SYSTEM

Item No.252 Projector:7000 Lumen Short Throw Laser Projector MR

Item No.253 Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M MotherboardRAM 16 GB Kingston DDR4 HyperX RAMStorage 256 GB SSDDisplay Adapter Nvidia GTX 1660 6GB VRAMNetwork Adapter Gigabit Ethernet LAN 10/100/1000HID Dell USB Keyboard + Mouse ComboMR

Item No.254 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.255 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC AC-S6T Acoustic Coverage™Description 6.5-inch 2-way, 130° conical Surface Mount speakersComponents LF : 165 mm (6.5-inch) Polypropylene woofer with 25 mm (1-inch) voice coilHF: 25 mm (1-inch) Aluminium dome tweeter with 25 mm (1-inch) voice coilFrequency Response 60 Hz–20 kHzRated Noise Power / Voltage 30 watts / 15.5 volts rmsMax O/P 101 dB SPL LTC / 107 dB SPL PeakImpedance 8ΩBroad-band Sensitivity 86 dB SPLCoverage Angle 130° conical (500 Hz–5 kHz)Directivity Factor, Rθ (Q) 6Directivity Index, Di 8 dBMR

Item No.256 Supply and installation of Amplifier with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Crown XLS 1502Description Two-channel, 525W @ 4Ω Class D Power AmplifierSensitivity 1.4VrmsFrequency Response +0dB, -1dBSignal to Noise >103dB (at .775Vrms, 6dB lower)Inter modulation Distortion < 0.3%Damping Factor > 200THD < 0.5%Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB

Item No.257 Cables / Connectors for the zone:MR

Item No.258 Equirectangular Application Development:MR

Item No.259 Integration / InstallationMR

Item No.260 Equirectangular Video Production MR

JOIN THE STARS / SIZE OF PLANET

Item No.261 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.262 65" Commercial Display:MR

Item No.263 Display Mount:MR

Item No.264 Computers:i5 with GTX CardMR

Item No.265 43 inch Samsung Touch screen MR

Item No.266 Router:DlinkMR

Item No.267 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC CP8Configuration Two-way active loudspeakerLF Transducer: 8 in (203 mm), coneHF Transducer: 1.4 in (35.6 mm) compression driverFrequency Response (-6 dB) 56 - 20 kHzFrequency Range (-10 dB) 53 - 20 kHzNominal Coverage Angle: 90° AxisymetricMaximum Rated SPL1: 124 dBAC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 HzAC Power Consumption (1/8th Power): 100 VAC, 0.75A - 240VAC 0.31AMR

Item No.268 Cables / Connectors for the zone:MR

Item No.269 Dual Display Interactive Application:MR

Item No.270 Integration / InstallationMR

Item No.271 AssetsMR

Item No.272 UI/UXMR

VIRTUAL REALITY ( VR )

Item No.273 Oculus Go:MR

Item No.274 Router:MR

Item No.275 TouchScreen Display:10inch Touch DisplayMR

Item No.276 Computer for touchscreen:Asus stickMR

Item No.277 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.278 Cables / Mounts:MR

Item No.279 VR Application Development:MR

Item No.280 Integration / InstallationMR

Item No.281 UI / UXMR

Item No.282 AssetsMR

ISRO TIMELINE

Item No.283 32inch Commercial DisplayMR

Item No.284 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.285 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.286 Cables / Connectors for the zoneMR

Item No.287 Content Playback ApplicationMR

Item No.288 Integration / InstallationMR

SENIOR CITIZEN ZONE : -

JUKEBOX AREA

Item No.289 HeadphoneMR

Item No.290 Asus StickMR

Item No.291 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.292 7inch TouchScreenMR

Item No.293 Cables / Connectors for the zoneMR

Item No.294 Juke Box Software playing softwareMR

Item No.295 Integration / InstallationMR

TOUCHSCREEN GAMES ( CROSSWORD TABLE )

Item No.296 Computer MR

Item No.297 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.298 Samsung 43inch Capacitive Touch Screen DisplayMR

Item No.299 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC CP8Configuration Two-way active loudspeakerLF Transducer: 8 in (203 mm), coneHF Transducer: 1.4 in (35.6 mm) compression driverFrequency Response (-6 dB) 56 - 20 kHzFrequency Range (-10 dB) 53 - 20 kHzNominal Coverage Angle: 90° AxisymetricMaximum Rated SPL1: 124 dBAC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 HzAC Power Consumption (1/8th Power): 100 VAC, 0.75A - 240VAC 0.31AMR

Item No.300 Cables / Connectors for the zoneMR

Item No.301 GamesMR

Item No.302 Integration / InstallationMR

WORLD OVER THE YEARS

Item No.303 22inch ScreenMR

Item No.304 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000MR

Item No.305 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.306 Cables / Connectors for the zoneMR

Item No.307 Content PlayerMR

Item No.308 Integration / InstallationMR

Item No.309 Footages and content developmentMR

VIRTUAL REALITY ( VR )

Item No.310 Oculus Go:MR

Item No.311 Router:MR

Item No.312 10 inch TouchScreenMR

Item No.313 Asus stick computerMR

Item No.314 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.315 Cables / Mounts:MR

Item No.316 VR Application Development:MR

Item No.317 Integration / InstallationMR

Item No.318 UI / UXMR

Item No.319 AssetsMR

HEALTH CHECKUP THROUGH INTERACTIVE GAME

Item No.320 Projector:7000 Lumen Short Throw Laser ProjectorMR

Item No.321 Motion Sensor:MR

Item No.322 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.323 Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M MotherboardRAM 16 GB Kingston DDR4 HyperX RAMStorage 256 GB SSDDisplay Adapter Nvidia GTX 1660 6GB VRAMNetwork Adapter Gigabit Ethernet LAN 10/100/1000HID Dell USB Keyboard + Mouse ComboMR

Item No.324 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.325 Customised Hardware:MR

Item No.326 Cables / Connectors for the zone:MR

Item No.327 Game Development:MR

Item No.328 Health Analysis:MR

Item No.329 Video Loop and Game Assets:MR

CENTRAL SERVER

Item No.330 Server:MR

Item No.331 Supply and installation of Server Rack with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model WQ IndiaSize 12 UMR

Item No.332 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 2016 Server (OEM License) MR

Item No.333 Display:24inch DellMR

Item No.334 Cat 6 Cables:MR

Item No.335 Switch:MR

Item No.336 Networking:MR

Item No.337 Central Management System: Development of two independent softwares that will manage multiple installations across technologies (maximum of 30 such installations) spread across total area of approx. 40,000 sq.ft., in total two zones at the leisure park. These softwares also manage the central controls which include switching on, sound decibel management, system tripping, single button activation and power management. MR

Item No.338 Integration / InstallationMR

BALASAHEB EXHIBITION HALL : -

PROBLEMS OF MARATHI MANUS

Item No.339 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000MR

Item No.340 32inch Commercial DisplayMR

Item No.341 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.342 CamerasMR

Item No.343 Cables / Connectors for the zoneMR

Item No.344 Content Playback Application with SensingMR

Item No.345 Integration / InstallationMR

MARMIK DIGITAL PUBLICATION + SIDE STATIC INSTALLATION

Item No.346 55inch Samsung Capacitive TouchscreenMR

Item No.347 Supply and installation of Computer Intel Core i5 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 8GB DDR4Storage 240GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.348 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.349 32inch Commercial Display MR

Item No.350 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.351 Supply and installation of Speakers with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model QSC CP8Configuration Two-way active loudspeakerLF Transducer: 8 in (203 mm), coneHF Transducer: 1.4 in (35.6 mm) compression driverFrequency Response (-6 dB) 56 - 20 kHzFrequency Range (-10 dB) 53 - 20 kHzNominal Coverage Angle: 90° AxisymetricMaximum Rated SPL1: 124 dBAC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 HzAC Power Consumption (1/8th Power): 100 VAC, 0.75A - 240VAC 0.31A MR

Item No.352 Cables / Connectors for the zone MR

Item No.353 Digital Book Application MR

Item No.354 Integration / Installation MR

Item No.355 Content + Editing MR

PERISCOPE

Item No.356 Oculus GoMR

Item No.357 Cables / Connectors for the zoneMR

Item No.358 VR AppMR

Item No.359 Integration / InstallationMR

Item No.360 Croma shoot + VR 3d Enviroment + stitching + Post production + IntegrationMR

BAL TO BALASAHEB

Item No.361 Viewsonic USTMR

Item No.362 Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M MotherboardRAM 16 GB Kingston DDR4 HyperX RAMStorage 256 GB SSDDisplay Adapter Nvidia GTX 1060 4GB VRAMNetwork Adapter Gigabit Ethernet LAN 10/100/1000HID Dell USB Keyboard + Mouse ComboMR

Item No.363 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.364 Customised HardwareMR

Item No.365 Resolume LicMR

Item No.366 Cables / Connectors for the zoneMR

Item No.367 Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M MotherboardRAM 16 GB Kingston DDR4 HyperX RAMStorage 256 GB SSDDisplay Adapter 4x Nvidia GTX 1080 16GB RAMNetwork Adapter Gigabit Ethernet LAN 10/100/1000HID Dell USB Keyboard + Mouse ComboMR

Item No.368 Integration / InstallationMR

Item No.369 Content & IntegrationMR

PHOTOBOOTH

Item No.370 43inch Commercial DisplayMR

Item No.371 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.372 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.373 7inch TouchScreen MR

Item No.374 Camera + Printer MR

Item No.375 Cables / Connectors for the zone MR

Item No.376 Photobooth Software MR

Item No.377 Integration / Installation MR

Item No.378 5 Poses MR

INSIDE MATOSHREE

Item No.379 ShortThrow Projector 7k Lumens

Item No.380 Supply and installation of Processor Intel Core i7 8700 (8th Generation) with specifications mentioned below and as per direction of Engineer-in-charge: Mainboard Gigabyte B310M MotherboardRAM 16 GB Kingston DDR4 HyperX RAMStorage 256 GB SSDDisplay Adapter Nvidia GTX 1660 6GB VRAMNetwork Adapter Gigabit Ethernet LAN 10/100/1000HID Dell USB Keyboard + Mouse Combo MR

Item No.381 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.382 Asus Stick MR

Item No.383 7inch TouchScreen MR

Item No.384 Cables / Connectors for the zone MR

Item No.385 AR Application for Quiz MR

Item No.386 Integration / Installation MR

Item No.387 Modelling + texturing + Rigging + Photorealistic lighting + compositing + Live Action ref shoot + Animation + script + editingMR

BALASAHEB CRICKET

Item No.388 65inch Commercial DisplayMR

Item No.389 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000MR

Item No.390 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.391 Cables / Connectors for the zoneMR

Item No.392 Content Playback and ManagementMR

Item No.393 Integration / InstallationMR

Item No.394 Content & IntegrationMR

BALASAHEB MUSIC

Item No.395 65inch Commercial DisplayMR

Item No.396 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000 MR

Item No.397 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License) MR

Item No.398 Cables / Connectors for the zoneMR

Item No.399 Content Playback and ManagementMR

Item No.400 Integration / InstallationMR

Item No.401 Content + Edit + IntegrationMR

SOUNDS OF BALASAHEB

Item No.402 HeadphonesMR

Item No.403 Supply and installation of Computer Intel Core i3 with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model Gigabyte BrixRAM 4GB DDR4Storage 128GB SSDDisplay Adapter Intel® GraphicsNework Adapter Gigabit Ethernet LAN 10/100/1000MR

Item No.404 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 10 Professional (OEM License)MR

Item No.405 7inch TouchScreenMR

Item No.406 Cables / Connectors for the zoneMR

Item No.407 Multi touchpoint software development MR

Item No.408 Integration / InstallationMR

CENTRAL SERVER

Item No.409 Supply and installation of Licenses with specifications mentioned below and as per direction of Engineer-in-charge:Windows 2016 Server (OEM License) MR

Item No.410 Supply and installation of Server Rack with specifications mentioned below and as per direction of Engineer-in-charge.Brand and Model WQ IndiaSize 12 UMR

Item No.411 windows Server 2016 lifetimeMR

Item No.412 Dell 24inch DisplayMR

Item No.413 Cat 6 CablesMR

Item No.414 SwitchMR

Item No.415 NetworkingMR

Item No.416 Central Management System: Development of two independent softwares that will manage multiple installations across technologies (maximum of 30 such installations) spread across total area of approx. 40,000 sq.ft., in total two zones at the leisure park. These softwares also manage the central controls which include switching on, sound decibel management, system tripping, single button activation and power management. MR

Item No.417 Integration / InstallationMR

LANDSCAPING

Item No 01 LANDSCAPING Provision of landscaping work including black Soil filling,grassing,tree plantation/shrubs and potted plant,lawn and drip water irrigation system. etc

Kunal Structure India Pvt Ltd