EXTENSION OF ROAD ALONGWITH RESURFACING ON CONNECTED ROAD NEAR RAJENDER CIRCLE AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed.

M&L for providing cement concrete Type D-2, 1:4:8 (using 40mm graded aggregate) as in mass concrete or under interlocking tiles complete all as specified and directed.

S&F bed lock parking tiles of 65mm thick, M-30 Grade with grey cement and pigment precast concrete in charcoal black coloured tiles over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for providing cement concrete Type B-1, 1:2:4 (using 20mm graded aggregate) cement concrete in roof kerbs or mud stops,for fixing poles, coping rounded or chamfered on edges/sides of interlocking tiles etc complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

S&F at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. Note:- 1. Length of finished kerb edging shall be measured for payment. 2. Precast C.C. kerb stone shall be approved by Engineer-in-charge.

M&L for applying two coat of synthetic enamel paint over concrete/plastered surfaces along with prepration of new surfaces of any description over 10cm width or girth with priming paints plaster coat complete all as specified and directed.

M&L for prepaing existing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with machenical blower and gunny bags to remove all loose dirt etc and applying evenly tack coat with bituminious primer using paving bitumen (VG-30) grade @ 5 kg/10 Sqm on road surface by mechanical sprayer complete all as specified and directed.

M&L for providing premix bituminous macadam laid rolled and compacted to required gradient and camber in any thickness using paving bitumen (VG-30) grade @ 4% by weight of total mix complete all as specified and directed.

M&L for providing premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content of paving bitumen (using paving bitumen VG-30 grade) by weight of total mix rolled and compacted to required camber and gradient with vibartory roller and 8 to 10 tonne power road roller complete all as specified and directed. Note:- (1) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid/spread by means of mechanical paver. (2) Filler for semi dense asphaltic concrete shall be stone dust @ 2% of total mix.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre line, stop line, dashes arrows etc and like n. exc 10 cm wide on roaads pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262 - 1989 with special applicator machine all as per manufacturer instruction complete all as specified and directed.

S&F in repair Solar Road Studs, made of DARK EYE or equivalant company of size (125 x 125 x 90 mm) having three LED on two sides with detachable batteries fixed with appoxy on road as per manufacturer instructions and having warranty for one year complete all as specified and directed.