SPL REPAIRS TO SAILOR MCPOs / CPOs ACCOMODATION (P-34 AND P-35) AT INS UTKROSH AND SPL REPAIRS TO CONCEALED PIPE LINE AND KITCHEN CUPBOARDS TO BLDG NO P-406, P-407 AND P-408 AT PERIERA ENCLAVE UNDER GE MINNIEBAY, PORT BLAIR

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instructio and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

Dismantling structural steel work including doors, gates but excluding framed truss, purlins etc complete all as specified and as directed

S& F tubular MS Pipes as in trusses / Rolled sections , cross beem , hip and jack rafters , vertical posts purlins where connected to common rafters fixed with angle cleats or connecting plates any similar work including welding, and all necessery works complete all as specified (grade of steel Fe-410- (Gde- E-250) quality- B ) complete all as specified and as directed

S& F in repairs steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic enamel paint over one coat of red oxide complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified

S&F aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

Taking down carefully loose and broken concrete by chiselling/picking etc upto a depth of 20 to 40mm from wall, ceiling, columns, beams,roof and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc. with removal of debries including necessary scaffolding etc. as required, complete all as specified and as directed.

M & L for applying one coat of anti corrosive primer @0.25 Ltr/Sqm to exposed surfaces of old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 micron thick film as per manufacturer's instructions complete all as specified and as directed.

M &L for applying one coat epoxy bonding agent @ 1 ltr/2.6 Sqm or as per manufacturer's instructions to old concrete surfaces of RCC floors, columns, beams and similar structural members for bonding with new concrete complete all as specified and directed.

Demolition of RCC / brickwork in suspended slabs, beams, lintels etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) all as specified

M&L for dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid beded and pointed in any motar complete all as specified

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified

Dismantling Floor, Hearth or Wall Tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed.

M & L for Glazed Ceramic Tiles, Coloured, of size 300X 200X 7 mm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

M & L for Glazed Ceramic digital Tiles, Coloured, of size 450X 300X 7 to 8mm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.06 Sqm and not exceeding 0.11 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M & L for coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 15mm thick screed bed or bedding layer in cm 1:6 etc complete all as specified and directed.

M&L for pre cast concret coloured with glazed finish (Lacquere finished) extrnal interlocking paver block of M-35 grade , having compressive str 30 N /mm2, 60mm thick of shade as approved laid dry over sand cushion of average thickness 50 mm duly consolidate,set and levelled the block in in proper level with interlocking laid in pavement complete all as specified and directed. Note : The rate quoted shall be deemed to be included for sand cushioning of paver blocks

S& F Plain,solid second class hard wood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified

M&L for first class hard wood for wooden beading,cupboards/ shelves/ wardrable /wall panelling .etc complet all as specified and as directed

S&F door closer hydraulically regulated designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg each complete all as specified and as directed

S&F magnetic catch for cup boards of brass body and striking plate all as specified and directed

S& F 75 mm thick heavy duty brass butt hinges bright polished complete all as specified and as directed

S& F 100 mm thick heavy duty brass butt hinges bright polished complete all as specified and as directed

S&F Brass locks for cupboards , drawers and similarwork of size 50 mm complete all as specified and as directed

S&F 100 mm long extruded brass modular decorative handles , fabricated type polished bright complete all as specified and as directed

Taking down existing chowkats or frames n.exc. 1.5 Sqm each without taking off shutters from the frames complete all as specified and as directed.

S & F Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. NOTE :- Glass panels, prelaminated particle boards & aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only aluminium anodised 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick complete all as specified and as directed.

Supply only 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination complete all as specified and as directed

Supply only 5 mm thick plain sheet glass of any sizes complete all as specified and as directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Taking down cement plaster on brick or stone wall and racking out joints hacking for key sucrubing down with water etc complete all as specified and as directed.

M&L for external rendering 5mm thick in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in CM 1:6 over brick or concrete surfaces finished even and fair including scoffloding at any height complete all as specified and as directed

M&L for rendering 15mm thick plaster in CM (1:4) on brick/block wall or concrete surfaces finished even & fair including taking down cement plaster complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth including taking down cement plaster complete all as specified and as directed.

M&L for applying two coats of cement based paint over a coat of chalk whitning on newly plastered surface of wall including preparation complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed

M&L for preparation of old plastered wall surfaces and applying one coats of acrylic emulsion based premium quality matt finish exterior antifungal paint as per manufacturer's instructions including necessary scaffoldings as required complete all as specified and as directed

M & L for preparation of old distempered and painted surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed..

M & L for preparation of old painted wood and wood based surfaces of any description not other wise described not exceeding 10cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.

S&F in repairs Vitreous China Wash down water closet pan semi pedastel pattern (Anglo-Indian type, EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and as directed.

S & F in repairs Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32mm brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed.

S&F in repairs 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and 32mm PVC bend complete all as specified and as directed.

S&F in repairs 32mm waste coupling, brass,chromium plated for sinks, basins, etc. complete all as specified and as directed

S&F in repair CP towel rail 20 mm dia, 60 cm long fixed with CP screws and wood cleats / rowel plug in wall, complete all as specified and as directed.

S & F in repairs pillar taps, cast copper alloy,CP, Fancy Type heavy duty, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs to Bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

S & F in repairs to Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in repair chromium plated health faucet with 100 mm PVC pipe for 15 mm bore with fittings complete all as specified and directed.

S&F in repairs brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

S & F in repairs 32/40mm dia PVC flexible Waste Pipe, 750 mm long fixed to Wash Hand Basin or Sink complete all as specified and directed..

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and as directed.

S&F in repairs 100 mm dia CP grating with/without hole incl joints with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm floor trap of any dia, plain with grating including jointing with solvent cement fixed in cement concrete all as specified and directed

M&L for making arrangements for scaffolding in shafts/spot/locationof weed growth,spraying anti weed solution of Herabicide Glyphosate 41% orequivalent onplant /weed leaves without cutting/disturbing the plants on sunny weather and allow the plant /weed to dry for a period of 30 days and removing the weed incuding its root ,making good with CM 1:3 or with PCC 1:2:4 (12.5mm graded aggregates) including 02 coats of acrylic paint complete all as specified.

M&L for demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement.

S & F Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed.

Taking up or down 15/20mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified

S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 20mm with proper clamping arrangements complete all as specified.

S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 25mm with proper clamping arrangements complete all as specified.

S&F CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with outer dia 32mm complete with proper clamping arrangements all as specified.

S&F CPVC brass threded elbow 20mm outer dia complete all as specifed and as directed

S&F CPVC brass threded Tee for 25 x 20mm outer dia complete all as specifed and as directed

S&F CPVC Brass threaded adopter (FTA/MTA) of 20mm outer dia complete all as specifed and as directed

S&F CPVC Brass threaded adopter (FTA/MTA) of 25mm outer dia complete all as specifed and as directed

S&F Tank adoptor for 32mm outer dia CPVC Pipe complete all as specifed and as directed

S&F CPVC Union for 32mm outer dia pipe complete all as specifed and as directed

S&F in repair ball valves for 32 OD CPVC pipes complete all as specifed and as directed

Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specifed and as directed

Dismantling any type of boarding with wooden frame work as in kitchen cabinet, shutter, drawar and similar work including builder hardware

M&L for 18 mm thick HDF high quality boardings one side pre laminated (white) and other side plain to receive decorative laminates as in kitchen cabinet/shelves/wardrobe/wall panelling fixing with necessary small fitting as required as per manufacturers instructions complete all as specified and directed

M&L for decorative laminates 1.00 mm thickness of surface finish, coloured and pattern as approved, fixed with approved adhesive as per manufactures instructions.

S&F heavy duty stainless steel Telescopic channels for sliding arrangement of size 20" for drawars, cabinets and similar works with carying capacity not less than 10 kg all as specified and directed

S&F heavy duty stainless steel Telescopic channels for sliding arrangement of size 20" for drawars, cabinets and similar works with carying capacity not less than 30 kg all as specified and directed

S&F Stainless steel auto closing heavy duty modular hinges for cupboard shutters complete all as specified and as directed

S&F 75mm long Modular Stainles steel decorative handles complete all as specified and as directed

S&F Stainless steel pull out Cuttlery Basket of size 21"x20"x4" of min 304 grade all as directed

S&F Stainless steel Plain pull out Basket of size 21"x20"x6" of min 304 grade all as directed.

S&F Stainless steel Plate Basket of size 21"x20"x8" of min 304 grade all as directed.

S&F Stainless steel Side bottle Basket of size 6"x20"x20" of min 304 grade all as directed.

Fixing only in repairs Bib Cock/Stop Cock/Mixers including cleaning, removing of blockages etc. of any type and size including replacement of brass spandle if required all as specified.

S&F in repair Vitreous china white heavy duty counter top wash hand basin of 520x440x180mm size, including waste coupling and waste pipe all as specified and directed.

S&F in repair 15mm bore fancy type CP Centre hole Wash Basin Mixure high quality without popup waste with 450mm braided hoses all as specified

S&F in repairs, 15mm bore CP angular stop cock fancy type high quality with wall flange complete all as specified and as directed

S&F in repairs, 15mm CP Bib Taps fancy type heavy duty with wall flange all as specified and directed

S&F in repairs15mm CP 2 Way Bib Cock heavy duty all as specified and directed

S & F in repair CP Health Faucet fancy type high quality with 8mm dia, 1.2 meter long flexible tube & wall hook complet all as specified and as directed

S&F in repair 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type complet all as specified and as directed

S&F in reapirs for 500 Litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including tank cover complet all as specified and as directed

S&F for in repairs 1000 Litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complet all as specified and as directed

Taking down carefully old copper point wiring complete for one light/fan/socket out let point and removing material from site incl fiitings /fixtures and making good the disturbed surfaces all as directed.

M & L for point wiring with 1.5 Sqmm (nominal area) PVC unsheathed multi stranded copper conductor PVC insulated 1100 volt FRLS grade multistranded cable drawn through and including PVC casing caping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed/surface,in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches,switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following.

One light /fan point controlled by one switch

One 5 Amps plug point independent board controlled by one switch

One three pin switch socket 5 Amps plug point on same board

All as per item No 102.00 above but with 2.5 Sqmm single core multi standard copper conductor for one three pin socket 5 Amps on independant board including continuous earth wire PVC insulated 2.5 Sqmm copper solid conductor to common earth dolly

All as per item No 102.00 above but with 4 Sqmm single core multi standard copper conductor for one three pin socket 15 Amps on independant board/ metal clad socket for AC point including continuous earth wire PVC insulated 4 Sqmm copper solid conductor to common earth dolly

S&F in replacement socket outlet 2/3 pin 5 Amps 240 volts flush type complete all as directed.

S&F in replacement socket outlet 3 pin 5/15 Amps 240 volts flush type complete all as directed.

S&F in replacement switches 6 Amps 240 volts flush type complete all as directed.

S&F in replacement switches 15 Amps 240 volts flush type complete all as directed.

S&F in replacement ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark complete all as specified and as directed.

M & L for sub main wiring of two single core PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor 2.5 Sqmm and drawn into and including PVC casing caping/conduit ISI marked minimum 20mm size and its accessories along with continuous earthing wire 4.0 Sqmm but in green colour complete on surface/concealed and connected to common earth dolly complete all as specified and as direccted

S&F in replacement sheet enclosure with category of protection double door type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB TPN 415 Volts 4 way,all as specified and directed. Note : Sheet metal enclosure fixed in the wall such that front cover shall be flush with the wall surface

S&F in replacement MCB TPN 63 Amps, 415 volts 50 Hz AC supply,10 KA C series complete all as specified and as directed

S&F in replacement MCB SP 6 to 40 Amps, 240 volts 50 Hz, 10 KA C series complete all as specified and as directed

S&F metal clad socket single pole and neutral sheet metal enclosure with and earth plug and socket complete with MCB 20 Amp, 240 Volts all as specified and directed.

S&F sheet metal enclosure (DBs) for fixing MCBs single pole and neutral 8 way with 200 Amps rated bus bar double door complete all specified and as directed

S&F MCB SPN 40Amps, 10KA, 'C' series, 240 V complete all as specified and as directed

S & F in replacement LED tube light fitting, 1x20 w, 230V, surface and wall mounted LED batten, elegant dia cast aluminium batten for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

S&F security light fitting LED type, 20 Watts 240 Volts luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt , and accessories complete mounted on 25 mm dia light grade GI pipe bracket 1.0 mtr long bent to shape, mounted on wall, connection complete all as specified and as directed

Supply & laying and testing in replacement XLPE insulated, screened, PVC bedded, aluminium conductor, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core laid in duct / fixed on wall/trenches complete all as specified and as directed

Excavation in soft / loose soil not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out incl forming of bottom for laying cable all as specified and directed

Returning filling using excavated soil including spreading levelling, watering and well ramming in layers n exc 25 cms all as specified and directed

Removal of surplus excavated material n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtrs above the starting point all as specified and directed

Supply, laying of DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 90 mm and inner dia 76 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified.

S&F exhaust fan single phase 900 RPM 300mm sweep heavy duty complete with louver shutter and incl fixing water proof ply wood 12 mm thick of size 350X350mm for fan base after cutting 300 mm dia of suitable size all as specified and directed Note : Old unsv fan shall be deposited to MES store.

S & F ceiling fan HS decor 5 star rating , 1200 mm sweep, 240 volt , Opal . White/brown including rod minimum length 1.5 m and bush , nut bolts , capacitors including drilling on roof and fixed 1 to 1.5 feet rod and connecting bolts etc all specififed

Design, Supply, installing testing and commissioning factory fabricated out door type totally enclosed LT cubical panel board suitable size with busbar, conforming to relevant IS and protection class IP-65 ,dust, vermin and weather proof fabricated out of 3.15mm thick CRCA sheet duly powder coated ,mounted on 40x40x5mm MS angle iron frame, duly welded in shape and coated with two coats of synthetic enamel paint of approved colour over a coat of red oxide primer including necessary grouting of legs 300mm deep in ground in PCC 1:4:8 type D2 using 40mm graded stone aggregate ,panel base to be 500mm above ground level with suitable compartments for controls and Monitors including cable glands for incoming and outgoing cables, locking arrangement, including accommodating, supply and fixing the following accessories/items including necessary internal panel wiring with suitable size of Copper wire PVC insulated & sheathed multi stranded complete all as specified and as directed by Engr-in-charge. Including Supply and fixing the following :-

GAYATRI ENTERPRISES

Usha Builders