Remodelling of LIS Naddle in tehsil Bhattiyat Distt Chamba HP

Amount

Providing Cast steel flanged sluice valve( with hand wheel)Class ASA -300 (Kirloskar/Leader /KSB) for Scour system at required locations for following dia and class in MSERW Pipe comprising of Sluice Valve, Tee, Bends, tail Piece manufactured of Parent pipe , Flanges joint complete with rubber gasket, Nuts & blots, & Scour arrangement etc . Capable of withstanding nominal seat pressure of 100 Kg/Cm square.The item will include laying and jointing of drainage pipe of required dia and class up to suitable points as per latest BIS Code complete in all repects of required size as per the direction of Engineer-in-Charge within all leads and lifts.

80 mm dia with MS Flanges Table - 23

Providing and fixing C.I. Sluice Valve PN (1.0) with hand wheel as per IS 780 Class upto 300 mm dia including brass spindle and as per IS 2906: Class- II complete with bolts nuts rubber insertion etc. as per Direction of Engineer-in Charge.

80 mm dia with MS Flanges Table - 5

Providing and fixing C.I. Sluice Valve PN (1.6) with hand wheel as per IS 780 Class upto 300 mm dia including brass spindle and as per IS 2906: Class- II complete with bolts nuts rubber insertion etc. as per Direction of Engineer-in Charge. 200 mm dia with MS Flanges Table - 5

Providing and fixing C.I. Sluice Valve PN (1.6) with hand wheel as per IS 780 Class upto 300 mm dia including brass spindle and as per IS 2906: Class- II complete with bolts nuts rubber insertion etc. as per Direction of Engineer-in Charge.

150 mm dia with MS Flanges Table - 5

Providing and fixing C.I. Sluice Valve PN (1.6) with hand wheel as per IS 780 Class upto 300 mm dia including brass spindle and as per IS 2906: Class- II complete with bolts nuts rubber insertion etc. as per Direction of Engineer-in Charge.

100 mm dia with MS Flanges Table - 5

Steel work welded in built-up section,trusses and framed work including cutting housting, fixing in position and applying a primering coat of red lead paint in beams joists channels, steel gate, angle cleets as in main and cross beam, hip and jack rafters, purlins connected to common rafters, and like.

Providing and fixing of Backelite sheet of size 30 cm x 30 cm of 10 mm thick complete within all leads and lifts andto the entire satisfaction of Engineer-in-Charge.

Providing and fixing of HRC fuse bars of L&T Make (250 A) complete within all leads and lifts andto the entire satisfaction of Engineer-in-Charge.

Providing and fixing of submersible PVC jointless flat cable of size 4 sqmm. complete within all leads and lifts and to the entire satisfaction of Engineer-in-Charge.

Providing Circumferencial Butt Welded joints by electrical arc welding to follwing dia MSERW Pipe as per IS :3183 - 2007 of grade L 210 or A,L290 or X 42,L390 or X56 having following wall thickness , welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816 -1969 specifications, by using welding electrodes of 2.5 mm to 6.3 mm of Advani Oerlikon (Adore) - CITOJET / ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual / mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.

Fabrication of coloumn posts for lowering of submersible pump set in the existing canal/ khad complete in all respect with in all leads and lifts as per the Direction and to the Entire satisfaction of Engineer-in-Charge.

Providing and fixing of anchoring for vertical post of pipe complete in all respect with in all leads and lifts as per the Direction and to the Entire satisfaction of Engineer-in- Charge.

Providing Cast steel flanged sluice valve( with hand wheel)Class ASA -150 (Kirloskar/Leader /KSB) for Scour system at required locations for following dia and class in MSERW Pipe comprising of Sluice Valve, Tee, Bends, tail Piece manufactured of Parent pipe , Flanges joint complete with rubber gasket, Nuts & blots, & Scour arrangement etc . Capable of withstanding nominal seat pressure of 100 Kg/Cm square.The item will include laying and jointing of drainage pipe of required dia and class up to suitable points as per latest BIS Code complete in all repects of required size as per the direction of Engineer-in-Charge within all leads and lifts.

200 mm dia with MS Flanges Table - 23

Excavation in earth work and disposal of all excavated earth such as pick work, jumper work, blasting work in hard/ soft rocks, including dewatering in saturated soil upto all leads and lifts disposed earth to be levelled and neately dressed within all leads and lifts as per the direction of Engineer-in -Charge.

Providing form work with steel plates 3.15 milimetre thick welding with angle iron in frame 30x30x5 milimetre so as to give fair finish including centering, shuttering and propping etc. with wooden battens and ballies, height of propping and centring below floor to ceiling not exceeding four metres and removal of the same for in-situ-reinforced concrete and plain concrete work in:-

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like within all leads and lifts.

Providing and laying cement concrete 1 : 5 : 10 ( One cement : five sand : ten graded stone aggregate 40mm nominal size) with 15 % plum and curing complete excluding the cost of form work in retaining walls/ breast walls, the size of plums shall usually be 150mm to 300mm as per P.W.D. specification within all leads and lifts as per the direction of Engineer-in-Charge.

Providing and fixing of PVC Pipe for weep holes of 100 mm dia having pressure of 4.50 Kg/Cm square complete in all respect with in all leads and lifts as per Direction and to the entire satisfaction of Engineer-in -Charge.

Bharat Engg and Suppliers (BID ID -502568)

Harvinder Singh Maan (BID ID -502295)

KESAR SINGH (BID ID -502695)