CONSRUCTION OF CONFERENCE HALL AND 01 SENTRY POST WITH ANCILLARIES AT FFC BILLETING AT BAKLOH CANTT BEARING No AGEID46 2020 21

Amount

Sch A Part I (BR):Excavating over areas, n exc1.5 m deep and getting out for foundation, etc., and getting out in soft/ loose soil.

Excavation in trenches for laying/ dismantling of pipeline not.exc. 1.5 mtr in width and not exc 1.5 mtr in depth and getting out in any type of soil.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as directed.

Surface Excavation not exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil

M/L for Sand filling under floors or in foundation including watering and consiladation

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point.

M/L Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete.

Plain Cement Concrete Type B1 1:2:4 ( using 20mm graded granite stone aggregate) cills plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work

75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing.

M&L for precast solid interlocking Blocks/paving tiles 60mm thick M-25 grade with grey cement and pigment shape, design as approved by GE/Engr incharge laid dry and bedded in sand complete all as specified

M&L for Pre-cast cement concrete block masonry with 200mm thick solid blocks (type B1 1:2:4) setting in in CM1:6

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed.

M & L Rendering 10 mm thick in cement mortar (1:3) as in bedding layer for laying of tiles in vertical surfaces complete all as specified & directed.

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.06 sqm but n. exc.0.11 sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match

M & L glazed, ceramic, coloured tiles of size 300mm x 200mm x 6 to 7mm thick, on vertical surfaces such as skirting, dados etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles as specified and directed.

RCC design M-25(using 20mm graded stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

RCC design M-25(using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floor, roofs, landings, balconies, canopies, deck slabs an d shelves and the like

RCC design M-25(using 20mm graded stone aggregate) as in chajjas

RCC design M-25(using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span

RCC design M-25(using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts

RCC design M-25(using 20mm graded stone aggregate) as in Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres

RCC design M-25(using 20mm graded stone aggregate) as in fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like

M&L PCC M-15(Nominal Mix) (40mm graded aggregate) in foundations, filling and mass-concrete

Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:4

M&L Reinforce cement concrete(Nominal Mix) 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in slabs supported on walls etc.complete all as specified and directed.

M&L, 20 mm thick rendering on other than fair surface of brick work or stone masonary surface in CM (1:3) finished fair & even using water proofing comound at the rate of 3% by weight of cement or as per the manufacturers instructions. (Note WPC shall be measured and paid for separetely)

Supply only integral water proofing compound.

M&L Concrete (1:3:6 type C-2) bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested

S&F 150mm dia RCC NP3 SGSW pipe, laid and jointed complete with collars

Use and waste of formwork for foundation beams etc., for rough finished surfaces all as directed

Use and waste of formwork to soffits of suspended slabs such as roof slabs, landings and similar work not exc 200mm thick (horizontal or sloping) for rough finished surfaces of concrete all as directed

Fair finished Form work to edges of concrete floor and roofs and similar work exceeding 10 Cm but not exceeding 20 Cm wide.

Use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, girder, bressum-mers, lintels, cantilivers, shelves incl supports, overhangs, etc. Also splay between floors and beams, etc. for rough finished surfaces all as directed

Use and waste of formwork for sides of columns for rough finished surfaces all as directed

Use and waste of formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) for fair finished surfaces of concrete all as directed

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders

15mm thick cement plaster on concrete surfaces or fair surface face of brick work in CM 1:4 surface finished even and smooth without using extra cement

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement.

M&L for applying two coats of oil bound distemper on wall on new plasted surfaces including preparation over a coat of Birla wall putty and a coat of JK Primer all as specified

M&L for applying two coats of cement base paint over priming plastered surfaces with JK primer priming coat complete all as specified.

Preparing newly plastered surfaces of walls and applying three coats of white wash.

Preparing newly plastered surfaces of ceilings and applying three coats of white wash.

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.

M&L 50 mm thick Cement concrete typeB-2 1:2:4 (using 40 mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete as directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F butt hinges 100mm long medium weight cold rolled fixed to chowkhat.

S&F 150mm aluminium handle cast type anodised.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple ( bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections cast aluminium alloy lenght of 250 mm.

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified including 4mm thick glass, locking arrangement, etc complete all as specified and directed by the Engr-in-Charge. Note : Thickness of aluminium section shall not be less than 1.5 mm)

S&F Anodised aluminium door shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified including 4mm thick glass, locking arrangement, etc complete all as specified and directed by the Engr-in-Charge. Note : Thickness of aluminium section shall not be less than 1.5 mm)

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 110mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.

S & F 110 mm bore PVC (SWR) bends any radius.

S & F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets float and handle, and bracket.

S&F vitreous China wash down water closet pan and trap (pedestal pattern) with plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or or aluminium hinging device and flush pipe to pedastal pan including all joints including connection to drain pipe & flush pipe.

S&F vitreous china wash basin with pedestal flat back, size 550 X 400 mm (coloured), excluding taps, waste chain, stopper PVC waste pipe including bracket and making good the damaged/disturbed wall /floor etc complete and as directed.

S & F fancy type pillar taps cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe.

Cutting existing steel tubing for alterations or additions (Each cut measured) Bore of pipe 25 to 32mm

S & F 20 mm bore galvanized steel tubes, medium grade with all fittings complete fixed to walls and ceilings or laid in floors as specified.

All as per Item above but 15 mm bore.

S & F 15 mm bore Bip taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical, with closed top), hoisted and fixed in position including taking down old one all as specified in SSR Part I and directed. Incl float valve

S&F stop valves/angle valve with long shank and cup (concealed type) fancy type, chromium plated with long shank and cup (concealed type) handle 15mm bore screwed both ends for iron pipe of for unions (Fixed in repairs)

S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed in repairs.

S&F , 20 mm bore, ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule. complete all as specified and directed.

S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing with solvent cement.

S&F Mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410 -W (GdeE- 250) qualityA etc

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

ATT Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

ATT Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Sch A Part II EM:Supply & fixing tubing medium grade galvanised iron laid in trenches/wall/floor complete with all fittings like socket, bends, union,,elbow,reducer,tee of 20mm bore, ISI marked complete all as specified and directed by Engineer-in-Charge.

Cutting, screwing existing tubing upto 50 mm dia for alterations/repair the existing connections in running condition and inserting tee of 20 mm size while laying new GI steel tubing all as specified and directed by Engr-in-charge.

Supply & fixing stop cock/gate valve cast copper alloy 20mm bore screwed down, high pressure with clutch of duty free handle, screwed both ends for iron pipe complete .

Supplying and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of follwing size:- 16 Sqmm 4Core

Supplying and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of follwing size:- 16 Sqmm 2 core

M&L for 40 mm GI tubing light grade galvanized with all fittings for protection to U/G cable along poles, walls, flows, road crossing including necessary cutting of road and making good in original surface where required.

M & L for point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm multistrand PVC concealed conduit (in stone/brick/blocks masonary) of approved size and quality ISI marked,including all other required accessories as specified in preamable 1(a) to (q) of section 19 of SSR Part-II under heading 'point wiring' in wall/ceiling including sunk cast iron terminal boxes grouting/flushing on wall for mounting fittings like switch,sockets etc covered with 3.00 mm thick plastic laminated sheet top cover in brick/Stone/blocks masonary wall complete including cutting,chasing,pinning and making good the disturbed surface by using cement mortar 1:3 complete all as specified and directed by Engr-in-charge.Make of wire/cable-Havells/Anchor/Finolex,(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plaster and matching the surface by white wash/colour wash all as per existing finishes complete).

All as per Srl item No 85 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 85 here in before but for one 5 amps socket out let on independent board.

All as per item No 85 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run of 2.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit (in stone/brick/blocks masonary)of appropriate size and best quality ISI marked, including all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed in wall including sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

All as per item No 85 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 4 Sqmm on independent board including one run of 4 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit of appropriate size and best quality ISI marked, including all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing Switch piano, flush button, single pole one way 6 Amps

Supply & Fixing Socket outlet 3 pin, 6 amps flush type.

Supply & Fixing Switch piano, flush button, single pole one way 16 amps

Supply & Fixing Socket outlet 2 in 1,5 pin 6 and 16 amps flush type.

Supply and fix ceiling rose 65X50 mm two to three terminals complete all as specified.

Supply and fix lamp holder for batten/angle fitting.complete all as specified and as directed

S & F Wall mounted LED integrateg batten fitting T5, 9/10 W LED, 2 feet, PVC extruded. havells cat no LUMLINE9WLED865SPCWH OR C&S Cat part No LTTB4F10WLEDP/W or philips cat no BN021 LED 10S-6500 PSU GRS1 or including all accessories complete all as specified.

S & F LED lamp 10 watts CP NO:- LHLDEUEEML8R010 of Havells or equivalent in Philips/Bajaj all as specified and as directed.

S & F Energy efficient LED ceiling light 24W of size 2X2 feet complete with all accessories & fixtures Cat no. DROPDOWNFLAT 2X2PLR24WLED840S of Make Havells or equivalent in Crompton/Philps/bajaj all as specified and directed.

S & F energy efficient LED 18W bldg security light fitting Cat Part no. LSTP-18-CDL of Cromton or equivalent in Havells/Bajaj/Philips, complete all as specified and directed.

S&F Exhaust fan 200mm PVC body all as specified and directd.Make: Orient,Havells,Crompton Greaves.

Supply & Fixing DBOX for MCB protected socket, of rating 25 Amp complete as directed by Engineer-in-charge. Cat Part No DHDDCDP025202503 of Havells or equivalent in ABB/Legrand/C&S,Anchor

Supply & Fixing Sheet metal enclosure for DB,s, double door (when MCB,s to be used) single pole & neutral 8 way with 200 amps rated bus bar 240 volts with fixing arrangements all as specified and directed by engr-in-charge.

Supply & Fixing Sheet metal enclosure for TPN,s, double door (when TPN,s to be used) TPN 4 way with 200 amps rated bus bar 240 volts with fixing arrangements all as specified and directed by engr-in-charge.

Supply and fixing TPN 63 Amps, 415 volts complete all as spd and directed. Make C&S, Havells, Legrand, L&T

Supply and fixing MCB single pole and nuetral 6 to 63 Amps, 240 volts complete all as spd and directed. Make C&S, Havells, Legrand, L&T

Supply and fixing MCB single pole 6 to 40 Amps, 240 volts all as spd and directed. Make C&S, Havells, Legrand, L&T

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

S&F Air termination single pointed aluminium rod 12 mm dia 300 mm long fixed including taking out old air termination rod complete all as specified and directed

S&F Aluminium strip 25x3 mm thick fixed with saddles and fixing screws etc with minimum two number saddles with screws on and including PVC gutties in each one mtr of length for roof conductors and down conductors above ground, complete all as specified and directed.

Earthing complete with galvanized GI earth plate electrode of size 600 x 600 x 6.00 mm ,buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized iron strip of size 25 x 4 mm as earth lead by means of bolts ,nuts ,check nuts of galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate no 5 of SSR Part 1, 20 mm dia watering perforated pipe medium grade 1.70 mtr long, including necessary pit with cover, funnel ,protection pipe GI 40mm, including testing on completion including dismantling old unserviceable earthing complete all as specified and directed by Engr in Charge

S&F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed by Engr in charge

M/s Joginder Paul Bhatia

Havish Construction

M/S KEWAL SONS