Construction of 1,00,000 lit Capacity OHT to Kulamangalam Village and Panchayat

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth with intial lead and lifts and cleaning and levelling the site and refilling etc.,complete - Narrow Foundations - First Depth 2.00m

Sand filling in foundation with clean M sand in layer of 15cm thick well watered rammed to consolidation including cost and conveyance of sand to site incluidng labour charges etc., completete as per standard specificataion

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing,and labour charges etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. - For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Plain Surfaces 3.62m to 4.62m - Above GL

Plain Surfaces at 7.62m to 8.62m

Plain Surfaces at 11.62m to 12.62m

Plain Surfaces at 15.20m to 16.20m

Plain surfaces - 18.5 to 19.10m

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Square Column upto 3.62m

Square Column 4.00m to 5.00m

Square Column 5.00m to 6.00m

Square Column 6.00m to 7.00m

Square Column 7.00m to 7.62m

Square Column 8.00m to 9.00m

Square Column 9.00m to 10.00m

Square Column 10.00m to 11.00m

Square Column 11.00m to 11.62m

Square Column 12.00m to 13.00m

Square Column 13.00m to 14.00m

Square Column 14.00m to 15.00m

Square Column 15.00m to 15.20m

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. - For Curved surfaces such as RCC floor slab, roof slab, beams, etc.

Curved Surfaces 15.20m to 16.00

Curved Surfaces 16.00m to 17.00

Curved Surfaces 17.00m to 18.00

Curved Surfaces 18.00m to 19.10

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For Circular surfaces such as Circular RCC columns etc.

Circular Column upto 3.62m

Circular Column 4.00 to 5.00m

Circular Column 5.00 to 6.00m

Circular Column 6.00 to 7.00m

Circular Column 7.00 to 7.62m

Circular Column 8.00 to 9.00

Circular Column 9.00 to 10.00m

Circular Column 10.00 to 11.00 m

Circular Column 11.00 to 11.62 m

Circular Column 12.00 to 13.00 m

Circular Column 13.00 to 14.00 m

Circular Column 14.00 to 15.00 m

Circular Column 15.00 to 15.20 m

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

For 1.5m Below G.L

For Above G.L to 4.0m

For 4.0m to 8.00m Above G.L

For 8.00m to 12.00m Above G.L

For 12.00m to 15.20m Above G.L

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

For 15.20m to 19.10m from G.L

For 18.30m to 21.96m from G.L

Supply and fabrication of steel required for all RCC items of works involved in the schedule, cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification

Plastering with cement mortar 1:3 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Colour washing two coats in all floors using best Cement Paint and best quality of approved variety and burshes, scaffolding charges etc. complete complying with standard specification.

Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 600mm X 600mm sizes of best approved quality and as per standard specifications etc.,complete.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Providing and fixing in position of PVC water bar 150mm wide with single bulb for horizontal joints necessary holders fabrication, the rate inclusive of cost of water bar, holders fabrication and fixing in position etc complete as per standard specification and as directed by the Engineer.As per TWAD SOR page No. 37.

Supply and delivery of CI D/F sluice valves with cap along with specials of the 150mm dia in size confirming to IS 14846 / 2000 (PN1) including flanged tail piece and other specials as required, loading, unloading, transportation charges and stacking and jointing including cost of jointing materials etc, complete as per standard Specification.As per TWAD SOR page No. 65.

Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc, including cost of pipes, specials, valve, labour charges for lifting, aligning, fixing of DI pipes etc, complete as detailed below. As per TWAD SOR page No. 48.

Supply and delivery of CI SLUICE VALVES NON RAISING SPINDLE TYPES TO PRESSURE RATING OF 1.6 PN TO BE USED IN PUMP HOUSES (LONG BODY/ LONG FACE TO FACE) 100mm Conforming to IS including flanged tail piece and other specials as required, loading, unloading, transportation charges and stacking and jointing including cost of jointing materials etc. complete. As per TWAD SOR page No. 68.

Geophysical survey charges including all etc., complete.

Cost and Supply of 150mm dia PVC Casing Pipe etc., complete.

Drilling of 150mm dia Vertical borewell including all hire & labour charges etc., complete.

in Over Burden soil - up to 24.00m (including cost for inserting the casing pipe in drilled hole)

in Hard rock - From 24.00m to 150.00m

Labour charges for erection PVC casing pipe

Cost and Supply of 3 phase 5 HP submersible Pumpset with duty of 75 lpm x 150m head etc., complete.

Cost and Supply of 3 phase 5 HP Panel board suitable for the above Pumpset etc., complete.

Cost for Construction of masonry Pedastal and supply, fixing of MS kishok box for fixing of panel board & EB meter including all charges etc., complete.

Cost for Construction of masonry Bore well Protection pit including all charges etc., complete.

Cost and Supply of following GI / PVC Pipes & Specials etc., complete.

50 mm GI Pipe

50mm GI coupling

150 mm Bore well cover

50 mm MS Clamp set

50 mm GI Elbow

50 mm GI Hex Nipple

50 mm Non Return Valve

50 mm GM Gate Valve

50 mm GI Union

4 Sqmm Submersible cable

25 mm PVC Pipe (for wiring)

25 mm PVC Bend (for wiring)

25 mm GI Pipe (for EB Service)

25 mm GI Bend (for EB Service)

25 mm GI Coupling (for EB Service)

90 x 63 mm PVC MTA & FTA

90 mm PVC Pipe (6 Ksc)

90 mm PVC Bend

Cost for erection of 5 HP submersible pumpset etc., complete.

Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD 127)

7/20 service wire

7/20 GI wire

Earth work Excavation in all types of Soil for Pipe laying work including all charges etc., Complete.

Cost for Laying and Jointing of PVC Pipes & Specials including cost of jointing materials etc., complete.

90 mm PVC Pipe

Refilling with Excavated earth including all charges etc., complete.

Cost for 3 Phase 5 HP EB deposit charges

Provision for Name Board Charges

Provision for Phots Charges

YNP CONSTRUCTION