801663/E8 SPECIAL REPAIRS TO BUILDINGS NO P-356 and P-357 AT EandITI AT AFS JALAHALLI

Amount

SCHEDULE 'A' PART - I (B/R WORKS) Removing existing unserviceable tar felt on any type any description from roof slab alongwith screed bed, cleaning of surface & removing the debris out side MD land complete all as specified and as directed.

Material and labour for Cement concrete 50 mm thick(Average thickness) type B-0, 1:2:4 (12.50 mm graded stone aggregate) as in level course for slab to achieve proper slope incl cutting holes in bricks or RCC wall for spout/rain water pipe complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar (1:3) on concrete surface with integral water proofing compound as per manufacturer's instructions consumed Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out. complete all as specified and as directed. (WPC shall be measured and paid separately)

Material and labour for Roof treatment for in-accessible roof as under: - (i) Apply polyurethane waterproofing coating on prepared concrete surface of roof slab & up to 500 mm of parapets and crumple joint including junction of roof and parapet. This stage shall be passed by the GE. Roof surface shall be left without any further treatment. (ii) Method: Cleaning the surface and applying FOSROC Nitoproof 725 (minimum 0.8 mm dft) over a priming coat of Nitoproof WB primer or equivalent product of Asian paints, M/s MC Bauchemic / CIPY / SIKA / Pidilite Dr Fixit / Thermax / STP / Berger applied as per manufacturer’s instructions. (iii) The work shall be carried out complete as per manufacturer’s specifications and application methodology. Execution to be done with authorised trained / skilled applicator of manufacturer as per technical guidance laid by manufacturer. Company bank guarantee to be given by contractor after completion of water proofing work before payment. (iv) A performance guarantee certificate for 10 years shall be submitted by the contractor to GE on completion of work as specified.

Material and labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-0 12.5 mm graded stone aggregate as in Floors, Paving finished fair and even complete all as specified and as directed.

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed 1:4 incl dismantling any floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for coloured Glazed ceramic tiles in vertical surface 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm back coat of CM 1:4 incl dismantling any floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for Machine cut Sadrahalli stone slab of 18 - 20mm thick (1st Quality) as in floor, riser of steps, skirting, dado and pillar laid over and including 15mm thick cement screed (1:4) jointed in grey cement slurry mixed with pigment to match the shade of the slab and including rubbing, polishing etc complete all as specified and as directed.

Taking down cement plaster from old walls/ceiling and raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as specified and as directed.

Material and labour for rendering 5mm thick in CM (1:3) on ceiling on fair faces of brick work or concrete surface and finished even and smooth without using extra cement complete all as specified and as directed. .

Material and labour for rendering 15 mm thick in CM 1:4 in two layer each layer 10 mm thick on fair faces of stone/ brick work or concrete surfaces and 5mm thick CM (1:4) finished fair and even using integral water proofing compound all as per manufactures instruction and all as specified and as directed. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ as supply only.

Supply only integral water proofing compound ISI marked complete all as specified and as directed

Material and labour for rendering 10mm thick in CM 1:6 on fair faces of stone/ brick work or concrete surfaces finished fair and even and all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection finished fair and even complete all as specified and as directed.

Material and labour for providing precast cement concrete solid building blocks or slabs 10cm thick type B1(1:3:6) 20 mm graded stone aggregate (with plain or interlocking joints as directed) set in mortar (1:6) complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding washer facing dressed stone work and precast concrete articles complete all as specified and as directed.

Material and labour for Raking out joints/ pointing with cement or cement lime mortar to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and as directed.

Material and labour for taking down of existing sunken slab treatment from the sunken portion and removing of existing filling of sunken, cleaning the surfaces washing down with water and rubbish off the premises, cleaning and filling cracks with sealing compound, brushing neat cement [email protected]/sqm and providing 25mm thick cement concrete type B-0 (1:2:4) (using 12.5mm graded stone aggregate) on sunken slab portion.. (b) Material and labour for two coat of acrylic cementitious water proofing coating (Dr FIXIT pidfin 2K manufactured by M/S Pidilite industries Ltd or equivalent in approved make) and followed by a overlay protective rendering 15mm thick in CM 1:3 mixed with liquid water proofing compound of approved make and including filling of brick bats and finishing the top surfaces even and smooth without using extra cement .(c) sunken slab after preparation as mentioned above method of application for acrylic cementitious water proofing coating is followed as per manufactures instruction incl removal of debris material from site complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately under respective item of BOQ as supply only.

Material and labour for providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentration for post constructional Anti-termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 liters per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentration for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floor complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentration for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC prelam sheet on front face and 2mm prelam coloured PVC sheet with particle board core on back face, complete all as specified and directed .

Supply and fix butt hinges 75 mm long medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fix butt hinges 100 mm long medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles, fabricated type anodised 100mm long complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles, fabricated type anodised 150mm long complete all as specified and as directed.

Supply and fix aluminium anodised, barrel tower bolts of extruded section 100 mm long complete all as specified and as directed.

Supply and fix aluminium anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and as directed.

Supply and fix aluminium alloy sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast of extruded section 250 mm long complete all as specified and as directed.

Supply and fix Steel windows with side hung /top hung shutters including projecting type hinges, frame with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

All as per item No 33 but without glazing bars

Material and labour for servicing/ easing of steel windows of size not exceeding 2 Sqm each including cleaning, scrapping, hacking, oiling, necessary welding, replacing broken hinges, handles ,stay etc and making good disturbed portion, painting etc, complete all as specified as directed .

Supply and fix 4 mm thick sheet glass ordinary quality and glazing complete in square not exceeding 0.50sqm each complete all as specified and as directed.

Supply and fix frosted glass 4.0mm thick, pin head type not exceeding 0.5 sqm in each pane and fixed complete all as specified and directed.

Material and labour for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and labour for mild steel powder coated pelmet rods 25mm outer dia including 2 Nos of brackets 2 Nos of pintals or side brackets as per site requirement complete all as specified and directed.

Material and labour for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for 4mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm each pane, complete all as specified and directed.

Material and labour for 35 mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

Material and labour for 2nd class hardwood 35mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated with out sash bars, edges of framing plain , chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified and as directed.

Material and labour for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and as directed.

Material and labour for PCC(1:2:4) type B 1 using 20mm graded stone aggregate as in holdfast including formwork complete all as specified and as directed.

Material and labour for treating ends of posts, backs of chowkets etc area tarred exceeding 0.1 Sqm but not exceeding 0.5 Sqm each with tar or coal tar paint including preparation of wood and wood based materials, steel and iron work, new or old complete all as specified and as directed.

Supply and fix MS work (flat iron) 25mm x 3mm thick) in small articles such as hold fast and similar small articles conforming to Fe 290 Gde E-165, complete all as specified and as directed.

Removing building materials etc to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

Taking down Chowkhats or frames (pvc/wooden/steel) not exc. 1.5 sqm each with shutters (Without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhat or frame(wooden/steel) exceeding 1.5 Sqm but not exceeding 4.00 Sqm each with shutter (with out taking off shutters from the frame) complete all as specified and as directed.

Material and labour for Raised pointing with CM 1:4 to random or polygonal rubble, uncoursed or brought upto courses complete all as specified and as directed.

Supply and fix PVC water tank 2000 Ltrs Capacity Rotational moulded polyethylene water storage tanks(three layer white colour) cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part I, including connecting the float valve of required size, PVC tank cover incl all fittings, 20mm bore GI medium grade overflow pipe and connect to inlet and included fittings outlet pipes, tank nipple, elbow, bend, union, sockets, etc complete all as specified and incl disconnecting existing tank of any description and capacity complete all as specified and as directed.

Supply and fix steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor bore of pipe 15mmdia. including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete incl taking up or down steel water tubing and connections 15 mm dia complete all as specified and as directed.

Supply and fix steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor bore of pipe 20mmdia. including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete 1:2:4 including taking up or down steel water tubing and connections 20mm dia complete all as specified and as directed

Material and labour for old plastered surfaces and applying water proof cement base putty@ 300gm (undiluted) per sqm of average thickness 1mm over the putty surfaces the mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 girt or above to make the surface free from dust and applying two coats of oil bound emulsion distemper over one coat of interior wall care primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc.By skilled labour as per following steps complete all as specified and directed. (a) Mix the putty powder by adding water as per manufacturer instruction and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI. (c) Allow 6-8 hrs time to dry the putty surface.

Material and labour for new plastered surfaces and applying water proof cement base putty@ 300gm (undiluted) per sqm of average thickness 1mm over the putty surfaces the mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 girt or above to make the surface free from dust and applying two coats of oil bound emulsion distemper over one coat of interior wall care primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc.By skilled labour as per following steps complete all as specified and directed. (a) Mix the putty powder by adding water as per manufacturer instruction and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI. (c) Allow 6-8 hrs time to dry the putty surface.

Material and labour for applying two coats of white wash on ceilings including preparation of old decorated surface complete all as specified and as directed.

Material and labour for New/old plastered surfaces and applying water proof cement base putty@ 300gm (undiluted) per sqm of average thickness 1mm over the putty surfaces the mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 girt or above to make the surface free from dust and applying two coats of exterior oil emulsion paint(weather coat) over one coat of exterior wall care primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc by skilled labour as per following steps complete all as specified and directed. (a) Mix the putty powder by adding water as per manufacturer instruction and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI. (c) Allow 6-8 hrs time to dry the putty surface.

Material and labour for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

Material and labour for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink wood primer all as specified and directed

Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

Material and labour for applying three coats of white wash on newly plastered ceilings and necessary preparation of surfaces all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps complete all as specified and as directed.

Supply and fix 125/ 110 mm bore PVC (SWR) gully trap incl jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs vitreous china squatting pan Orissa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed

Supply and fix in repairs vitreous china wash down water closet (pedestal pattern) EWC white including plastic water closet seat cover and mild steel chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim complete all as specified and as directed.

Supply and fix in repairs vitreous china wash basin white flat back size 550x400mm including brackets, waste coupling full or half threaded 32mm dia (min wt 45gms) complete all as specified and as directed.

Supply and fix in repair vitreous china urinal bowl type of flat back, size of 465x355x265mm, white with grating & unions for discharge pipe complete including provide and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in fixing automatic flushing cistern with brackets, flush pipe, grating and unions for discharge pipe and complete all as specified and as directed.

Supply and fix PVC waste pipe 32 mm dia flexible with cup to fit wash hand basin waste coupling in repair complete all as specified and directed

Supply and fix in repair Bib tap cast copper alloy chromium plated suitable for 15mm bore pipe with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and fix in repairs brass chromium plated 2-in-1 tap 15 mm bore for fixing of health faucet complete all as specified and as directed.

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed .

Supply and fix PVC (SWR) vent cowl bore of 110 mm bore complete all as specified and directed.

Supply and fix in repair PVC low level flushing cistern 10 liters capacity (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, Joint between flushing pipe and socket of W.C. pan pre-made, if any complete all as specified and as directed.

Supply and fix in repair15 mm bore fancy type pillars taps chromium plated cast copper alloy with capstan head, long screwed shanks complete all as specified and as directed.

Supply and fix in repair chromium plated stop/angle valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed.

Supply and fix in repair 15mm chromium plated shower roses with or without swivel joints and including fixing to steel pipe or union and all as specified and directed.

Supply and fix waste coupling of PTMT (half or full threaded) Minimum weight 32mm- 45gms complete all as specified and as directed.

Supply and fix in repair tubular towel rail alumunium anodized 20mm dia 'D' type 60cm long between flanges and all as specified and as directed.

Dismantling of cast iron / RCC/ PVC drain pipes jointed in cement mortar and taking out from trenches or from walls of any bore including fittings complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints laid under floors bore of pipe 110 mm complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints under floors bore of pipe 75 mm complete all as specified and as directed.

Supply and fix in repairs 75 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed.

Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed.

Supply and fix 75mm dia PVC bend any radius complete all as specified and as directed.

Supply and fix 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

Supply and fix 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

Supply and fix PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed.

Supply and fix PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 8 feet 4 pipes pulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes) including taking down old U/S all as specified and as directed.

Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works complete all as specified and as directed.

Material and labour for reinforced cement concrete (1:2:4)type B-1 using 20mm graded stone aggregate as in chajjas and finishing exposed surfaces fair & even all as specified and as directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping) complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10cm width or girth including preparation of new steel surfaces all as specified and as directed.

Supply and fix in repairs Concussive push button taps of cast copper alloy, chromium plated, screwed for 15mm dia iron pipe and fixed complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

Excavating in post holes in hard / dense soil (or smilar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

Supply and fixing of MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) includiong all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and labour for Cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in foundation of posts water troughs and the like including weathering, slightly rounded or chamfered angles and threading complete all as specified and as directed.

Supply only Chain link MS galvanised fencing any size or type all as specified and as directed.

Fixing only Chain link fencing including line wires any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified and as directed.

M & L for Expanded metal not exceeding 4 kg per Sqm, cut to lenght, bent to shape required and typing with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanished steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed

SCHEDULE 'A' PART - II (E/M WORKS) Taking down carefully copper/aluminum point wiring (light, fan, Power) complete including fittings such as switches, ceiling roses pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surface of wall, floors, roof etc complete all as specified and as directed.

Material and labour for Point wiring complete with 1.5 Sqmm single Core PVC insulated FRLS cable, 1100 volts grade unsheathed with multi stranded copper conductor drawn through and including PVC rigid non metallic conduit with all fittings such as bend, tees, elbow, end caps etc fixed on the surface of wall, ceiling, roof, steel structure etc. by means of suitable fixing accessories including provision of 1.5 Sq mm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor including provision of modular metal pressed flush box concealed in wall, including suitable modules modular white inner and outer top cover and plate for housing the modular switches, sockets, regulators etc for One light point controlled by one switch one way 6 Amps complete all as specified and as directed. Note : Cost of for cutting chasing, flush metal box and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.

All as per item No 109 but for One ceiling fan point controlled by one modular switch one way 5 Amps with 2 module fan regulator

All as per item No 109 but for One Exhaust fan point controlled by one modular switch one way 5 Amps

All as per item No. 109 here -in - before but for One 2/3 pin switch socket point controlled by one modular switch and one modular socket 5 Amps 5 pin on Independent board.

All as per item No 109 but for One modular switch and one modular socket out let 5 Amps 5 pin on same board.

All as per item No. 109 here -in - before but for One light point controlled by two, two way modular switches.

All as per item No. 109 here -in - before but for One power socket outlet controlled by one modular switch 16 A with two module 5/15 Amps modular socket with cables 4 sq mm complete all as specified and directed.

Supply and fix in Modular Switch 1 way 6 A, 1 Module complete all as specified and as directed.

Supply and fix Modular Switch 1 way 16 A, 1 Module complete all as specified and as directed.

Supply and fix Modular socket 6 A, - 5 pin combined 2 module complete all as specified and as directed.

Supply and fix Modular socket 6/16 A, - 5 pin combined 2 module complete all as specified and as directed.

Supply and fix Modular switch, 1 module , single pole, two way, 5 Amps, 240 V complete all as specified and as directed.

Supply and fix Modular fan regulator 120W, 2 Module for ceiling fan complete all as specified and directed.

Supply and fix ceiling rose, surface bakelite type, PVC, 65 x 50 mm isolated body with three terminals complete all as specified and as directed.

Taking down of old existing ceiling fan of any size complete from the position and deposit to MES store yard for reuse all as specified and directed.

Refixing existing serviceable ceiling fans 1200/1400 mm sweep servicing, painting. of ceiling fan with one coat of synthetic enamel paint of existing colour by spraying including providing of greasing/oiling, filling cavities with filler after cleaning all dust etc. complete all as specified and as directed by Engineer-in-Charge. Note : Cost includes replacement of rubber bush, hanging hook with new cotter pins etc

Taking down of existing exhaust fan of any size from the position and deposit to store yard for re-use complete all as specified and directed.

Refixing existing serviceable Exhaust fans 300/225 mm sweep servicing, painting Exhaust fan with one coat of synthetic enamel paint by spraying including greasing/oiling, filling cavities with filler after cleaning all dust, provision of fixing new nut, bolt and washers in wall as required etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix new Exhaust fan 300 mm sweep, 230/240 volt AC single phase, metal Body, heavy duty, 1400 RPM, with blade, frame, Metal louvers of suitable size including core cutting hole on stone masonry (Machine cutting) suitable for fixing exhaust fan of min dia 300mm including provision of suitable new nuts bolts and louvers and make good the surface to match with existing surface complete all as specified and as directed.

Supply and fix new electric water heater, storage type mild steel body with glass lined coating tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc including connecting up electrical, hot & cold water PVC connections and testing complete all as specified and directed. (Note- Old unserviceable water heater will be deposited to MES store yard.)

Supply and fix New ceiling fan 1200 mm sweep, 50 Watts, 340 RPM, 230/240 volt AC, complete with down rod, canopy, 3 core PVC flexible copper wire 0.75 Sqmm of required length all as specified and directed.( Note- Old unserviceable ceiling fan will be deposited to MES store yard.)

Material and labour for sub main wiring with two runs of single core stranded copper conductor unsheathed PVC insulated 2 X 6.0 Sqmm FRLS cable 1100V grade, drawn through suitable size of non-metallic PVC rigid conduit with 1x 6 sqmm FRLS copper conductor cable as earth conductor and conduit accessories fixed up in surface/recessed as required, connection up with suitable size copper lugs and taking down old wiring complete all as specified and directed.

Material and labour for sub main wiring with two runs of single core stranded copper conductor unsheathed PVC insulated 2 X 4.0sqmm FRLS cable 1100V grade, drawn through suitable size of non-metallic PVC rigid conduit with 1x 4 sqmm FRLS copper conductor cable as earth conductor and conduit accessories fixed up in surface/recessed as required, connection up with suitable size copper lugs and taking down old wiring complete all as specified and directed.

Supply and fix wall mounting LED bed side light fitting made up of aluminium, 360 degree flexible swing & rotating type bracket including replaceble type 3 Watts LED lamp prewired and the mounting base having self controlled single pole switch including fixing arrangement to wall complete all as specified and as directed.

Material and labour for sub main wiring with four runs of single core stranded copper conductor unsheathed PVC insulated 4 X10.0sqmm FRLS cable 1100V grade, drawn through suitable size of non-metallic PVC rigid conduit with 2 x 6.0 sqmm FRLS copper conductor cable as earth conductor and conduit accessories fixed up with suitable size copper lugs and taking down old wiring complete all as specified and directed.

Supply and fix in repairs 4 ft LED batten, wattage 20 w, having minimum lumen efficiency 100 lumen/watts, surge protection and wide operating voltage range - 140V to 270 V , LED has colour Temperature of between 4500K to 6500k with diffuser, IP 20, Aluminium Housing with all accessories internally Pre wired and including connecting up with 2/3 core twisted flexible copper conductor cable 0.75 sq mm from ceiling to fitting, mounted on roof/wall etc. on PVC round block of suitable approved size at as specified and as directed

Supply and fix in repairs 2 ft LED batten, wattage 10 W, having minimum lumen efficiency 100 lumen/watts , surge protection and wide operating voltage range - 140V to 270 V, LED has colour Temperature of between 4500K to 6500k with diffuser, IP 20, Aluminium Housing with all accessories internally Pre wired and including connecting up with 2/3 core twisted flexible copper conductor cable 0.75 sq mm from ceiling to fitting, mounted on roof/wall etc. on PVC round block of suitable approved size at as specified and as directed

Supply and fix in repairs LED building security/street light fitting 36 watts made up of pressure die cast housing with toughened glass diffuser, with high power LEDs with option of secondary optic with IP66 protection, 110 LM/ watt and wired with accessories including suitable bracket made with 32mm dia GI pipe light grade of 1m long bent to shape & clamps with bolts & nuts complete all as specified and as directed.

Supply and fix in repairs MCB DB SPN 8 WAY, horizontal, double door, 240 V, AC, 50 Hz, for MCB DP as incomer and SP MCBs as out going.IP- 43 protection universal mounting with copper busbar, neutral link, earth link, earthing shuds all as specified and directed

Supply and fix in repairs MCB DB SPN 12 WAY, horizontal, double door, 240 V, AC,50 Hz, for MCB DP as incomer and SP MCBs as out going.IP- 43 protection , universal mounting with copper busbar, neutral link, earth link, earthing shuds all as specified and directed

Supply and fix in repair MCB DB TPN 4 WAY, horizontal, double door,415V, AC,50 Hz, for MCB DP as incomer and SP MCBs as out going.IP- 43 protection confirming to IS-13032, universal mounting with copper busbar, neutral link, earth link, earthing shuds all as specified and directed

Supply and fix in repairs MCB TPN 415 volts 63 Amps, 10 KA rupturing capacity 'B' series all as specified and as directed.

Supply and fix in repairs MCB TP 415 volts 40 Amps, 10 KA rupturing capacity 'C' series all as specified and as directed.

Supply and fix in repairs MCB single pole 240 volts 5 to 30 Amps, 10 KA rupturing capacity 'C' series all as specified and as directed.

Supply and fix in repairs MCB single pole and neutral 240 volts 40 to 63 Amps, 10 KA rupturing capacity 'C' series all as specified and as directed.

Supply, installation, testing and commissioning of factory made indoor LT panel board wall mounted type made out of CRCA sheet of 2 mm thick totally enclosed weather and dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of Acrylic sheet for meter reading, space to accomodate breakers with suitable control MCCB/MCB circuit and powder coated paint on panel surfaces, CPRI type tested complete all as directed including accommodate the following accessories:- Incoming (a) MCCB 250 Amps 4 pole, 415 Volts, 16 KA - 01 No with thermal & magnetic release as main Incomer (b) Phase LED indicating lamp-01 sets (R,Y,B) (c) Internal wiring with PVC insulated Copper cable FRLS of suitable size with copper lugs arrangement (d) 400 Amps copper bus bar 3 phase 4 wire system mounted on epoxy insulators. Out going (e) MCCB 63 Amps 4 Pole, 415 Volts, 16 KA with thermal & magnetic release- 05Nos (f) Re-fixing existing 3 phase electric meter - 01 Nos ,g) Provision of new multifunction VAF meter - 01 No, (h) Brass Gable gland for incoming and outgoing cable with detachable bottom plate as required at site - 01 Lot (j) GI Strip as Earthing terminals 25 x 3 mm thick at bottom of panel

Material and labour for earthing complete with galvanized steel earth plate electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5M below normal ground level connected to GI earth strip 25 x 3 mm by means of nuts, bolts, check nuts and washer of GI steel and connecting to testing point including all of test point,GI protection pipe & GI watering pipe arrangement with funnel, wire mesh arrangement complete and all as shown in electrical plate No. 3 of SSR Pt I. The work is inclusive of necessary earth work excavation and PCC chamber in type CI (1:2:4) with RCC 1:2:4 type B1 chamber cover 50mm thick including taking down old unserviceable earthing complete all as specified and as directed.

EURO ENTERPRISES (BID ID -3407664)

SREE BUILDERS (BID ID -3406261)

chowdeshwariconstructionco (BID ID -3409034)

VARGHESECHACKO AND CO (BID ID -3403260)

C R R CONSTRUCTIONS (BID ID -3411587)

LAKSHMI CONSTRUCTIONS (BID ID -3406934)