FOR THE EXECUTION THE WORK INCLUDING ELECTRICAL AND PLUMBING ITEMS AS WELL AS PROCUREMENT OF BUILDING MATERIALS FOR UNDERTAKING THE CONSERVATION WORK NAMELY MINOR REPAIR TO THE MOSQUE AND ITS ADJOINING CELLS AT SAFDARJUNG TOMB NEW DELHI

Material and Work

UnSlaked Lime (Rajgarh/Katni) in proper packing

Surkhi of 1st class bricks free from dust and foreign materials.

Coarse Sand in good quality free from dust and foreign materials

Gur /Sheera

Belgiri (Well dried)

Gum (Babool)

Lakhori Bricks (Special size)

Safedi (Daliya Lime)

Stone dust /Chips 1st quality (Free from clay organic matter etc.)

Batasha

Red Oxide

Chhoped Jute/ Sun Jute

Steel Pins

Copper Dowels

Bamboo Solid (Height upto 10')

Rope Sisal/ Jute (25mm dia)

Round off chemical for uprooting the tree from sturcture

R/S Stone 100 mm avg. thick

White Makrana Marble first quality

R/S Stone 65mm avg. thick

Brick Zira

Brick Aggregate (15-20 mm n/s)

Removal of malwa by mechanically transportation from site to dumping ground up to 15 Km to 20 Km including manually head lead up to 300 mtrs.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600x600 mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Conical headed nails 12 cm long 6mm dia with brase flower

Nails Bankia, Kunda, Janjeer etc.

Fevicol and Gurja

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing multiwall polycarbonate sheet (three- layered), minimum 10 mm thick, UV-protected, of approved make and colour (e.g., blue, bronze, or clear), over pre-installed MS frame (frame paid under separate item), including all fittings, accessories, labour, and T&P complete. (The sheet shall be fixed in required shape and slope using: EPDM rubber gaskets (top and bottom), Powder-coated aluminium profiles and channels (minimum 10×10×1.5 mm, 0.2 kg/m), Self-drilling and self-tapping steel screws (min. 50 mm long, fixed @ 150 mm c/c) Anti-dust tape at ends and breather tape at upper edges,Silicone sealant for waterproofing joints Work includes: Cutting, bending, and shaping of sheets as per site dimensions, All labour, tools, and tackles required for safe and precise installation

Provision for providing and fixing of plumbing items, Sanitary Work and water supply work required at site. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder : C.P. brass

Polyethylene water storage tank with cover and suitable locking arrangement (2000 ltr.

"Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

"Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

"Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Jalli Small Size

Elbow

T- Joint

Angle Valve cock

CPVC Solvent Cement (500ml)

CPVC Union

Connection Nipple

Labour charges for fitting of plumbing items, Sanitary Work and water supply work.

Provision for providing and fixing of electrical items required at site. PVC Batten 2"

PVC Batten casing cable clip (Pack of 50 pcs.)

Junction box

Flush metal boxes 12 M

Flush metal boxes 8 M

Flush metal boxes 4 M

Flush metal boxes 2 M

12 way SPN metal white double door distribution board MCB Box

PVC insulated 6 mm single core flexible copper wires & cables polycab / Crompton / Havells (1 bundle= 90 rmt )

PVC insulated 2.5 mm single core flexible copper wires & cables polycab/Crompton/havells (1 bundle= 90 rmt )

PVC insulated 1.5 mm single core flexible copper wires and cables polycab/crompton/havells (1 bundle= 90 rmt )

PVC insulated 1 mm single core flexible copper wires & cables polycab/crompton/havells (1 bundle. = 90 rmt )

Havells or equivalent 12 M cover plate

Havells or equivalent 8 M Cover plate

Havells or equivalent 4 M cover plate

Havells or equivalent 2 M cover plate

Polycarbonate bulb holder for wall

LED Bulb 15 watt (Havells/Orient or equivalent)

Havells or equivalent 6A five pin socket

Havells or equivalent 6A one way switch

Havells or equivalent 6A -16A three pin combined shutter socket

Havells or equivalent 16 A one way switch with indicator

Havells or equivalent PVC Plastic 32A MCB DPC curve

Havells or equivalent 32A single pole MCB, Multi Standard (HA-SPMCB32)

Jaset innovations chipboard screw with saw thread and nylon wood dowel - white zinc plated - flat pozidriv counter sunk head - Assorted small sizes- Pack of 258 pcs

Havells or equivalent Ventil Air DX 200 mm exhaust fan (white)

Pedestal fan High Speed (Havells or equivalent)

Wall fan (Havells or equivalent)

Modular Socket 5 amp

Modular Switch 5 amp

Electric Tape (Steelgrip or equivalent ) (1 box = 30 pics)

LED Tube lights 20 watt (Havells/Crompton or equivalent)

PVC gitti (Pack of 100 pcs.)

Electrical items fitting charges

Provision for photo and drawing documentation during the execution of conservation work.

Please Enable Macros to View BoQ information