Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹52.9 L+₹8.0 L (17.8%)Rejected-Finance VILL POST MANJHULI PS BAKHITIYARPUR KHUSRUPUR DIST PATNA BIHAR 803202 | NALANDA | BIHAR | 803202 | L2 | Rejected-Finance Quoted amount is more than L1 | |
| 3 | L3₹54.2 L+₹9.4 L (20.9%)Rejected-Finance | L3 | Rejected-Finance Quoted amount is more than L1 |
Tender Value
₹48.4 L
EMD Value
₹96,700
Closing Date
4 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Sahil Ratusaria, IDSE
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
SPL REPAIRS WORK TO BLDG NO P-10/1 TO 8 P-11/1 TO 8 (OR MD ACCN) AT JAMSHEDPUR UNDER GE RANCHI
2023_MES_628881_2
8200/1512/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class D Cat a (i)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹96,700
Yes
29 Feb 2024
21 Dec 2023
6 Jan 2024
22 Dec 2023
4 Jan 2024
22 Dec 2023
Amount
Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.
M&L PCC (1:5:10) type E-2 using 40mm graded brick aggregate as in sunken portion complete all as specified and directed.
M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sunken floor .average thickness 40mm and making adequate slop towards spout pipe etc complete all as specified and directed.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.
M&L PCC (1:4:8) Cement concrete type D-2 using 40mm graded stone aggregate in foundations,filling and mass concrete, complete all as specified and directed.
M&L Cement concrete type B- 2,1:2:4 ,75mm thick (40mm graded aggregate) as in floors.
Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement.
M&L rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using on wall finishing the surfaces even and fair without using extra cement.
M&L 10 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed.
Supply and fix three Track Sliding powder coated aluminium Window of sizes of Top/Side and Bottom track section of 91.80mm x 31.75mm x 1.20mm thick and Shutter section of sizes 39.40 mm x 17.70mm x 1.20mm thick including joining cleats, beading,locking arrangement, rubber gasket for fixing etc complete with 5.5 mm thick tinted glass & stailness steel wire cloth, 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. .
Supply and fix anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazingclips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.
S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 .
Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter (without taking of shutter from framed) complete incl removing from site.
Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4 Sqm each with shutter (without taking of shutter from framed) complete incl removing from site.
Taking down shutters of any description exc 1 sqm and n. exc 2 sq m each and removing from site, complete all as specified and directed.
M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
M&L Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work.
M&L for 30 mm thick flush shutters solid core construction,with block board core and plywood face panels,commercial type on both sides complete all as specified as directed.
S&F 30mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.
S&F Solid PVC Double door frame of size 50mm x 47mm made out of 5mm wood grain printed sheet PVC sheet reinforced with M.S.tube, suppling & fixing in opening as per specification & drawing
S&F factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2 mm thick prelaminated Moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples
S&F Hasp and staple safety type aluminium anodized hinges pin incl bolt to hinges plate 125 mm long.
S&F butt hinges 100mm long medium weight cold rolled MS and fixed complete all as specified and directed.
S&F extruded aluminium alloy butt hinges 100mm size type B-21complete all as specified and directed.
S&F 150 mm long aluminum anodized barrel tower bolt extruded section.
S&F aluminum handles cast type anodize 150 mm long.
S&F 300 mm long of bolt mild steel sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified and directed.
S&F for 300mm ordinary rat tail rod pattern springs including roller and roller plate of brass complete all as specified and direcetd.
S&F mild steel works as in small articles like hold fasts, conforming to Fe-290 or Fe-165 all as specified & directed.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making dismantaled portion in CM (1:3) or cement concrete 1:2:4 Type B-1,Depth of embedded portion of Holdfasts not exc.half brick Complete all as specified and directed.
Taking up or down steel tubing and connection of 15 mm bore complete all as specified and directed at site.
Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site .
Supplying and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
S&F 20mm CPVC Brass elbow for 'hot or cold' water supply connection and similar works etc,.
S&F 20mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,.
Dismantling of boarding any description, fixed in any position with screws all as specified.
S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination to timber frame work in Cupboard all as specified and directed.
M&L for 2nd class hardwood of sectional area exc.15 & n.exc 25 sqcm in plain fillets,square rectangular in section,clean sawn,secured with nails complete all as specified and directed.
S&F 30mm width of flaps continues piano hinges mild steel bright finish or elec-trogalvanised complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site.
M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls/floors including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.
M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls/floors including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.
S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed.
S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed.
S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed.
S&F 110 mm bore PVC (SWR) vent cowl.
S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.
S&F 110mm dia PVC (SWR)WC connector with lip ring.
Demolition and breaking up drain pipe 100 mm internal dia of pipe (salt glazed ware, AC or reinforced concrete) sat in cement mortor.
M&L PCC 1:3:6 type C-2 using 40 mm graded stone agg for concrete bed to drain pipes including , packing under and haunding against the sides of pipe, after they tested for 100 mm dia pipe.
Demolition of brick work built in cement mortar.
M&L for brick work using sub class B bricks straight of curved on plan exc 6m mean radius built in CM (1:4) Complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall built in CM (1:4) Complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed plate etc complete all as specified and directed.
M&L precast cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in cover slab, shelves, and similar work set in CM (1:4).complete all as specified and directed.
M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc all as specified and directed.
M&L for mild steel TMT bars 8 to 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L rendering 10mm thick on fair faces of brick or concrete surfaces and finishing the surfaces fair and even without using extra cement in CM (1:4) with W.P.C (W.P.C will be measured and paid separately) complete all as directed at site.
Supply only integral water proofing compound.
S&F in repair for 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.
S&F in repairs stop valve/angle cock fancy type of 15 mm dia cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle long shank and cup (concealed type) screwed both ends for iron pipes or for unions.
S&F in repair 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed.
S&F in repair, 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F for 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs for shower rose chromium plated with or without swivel joints 75 mm dia complete all as specified and directed.
S&F in repair for vitreous china squatting pan ORRISA Pattern of size 580x 440mm white with integral foot rest and 's'or 'p trap'complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints complete all as directed.
S&F for vitrious china wash basin, white flat back size 550 x 400 mm including waste, chain & plug and poreclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for WHB etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete all as specified and directed.
S&F for pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstain head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.
S&F PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.
S&F in repair stainless steel kitchen sink with drainage board 1 mm thick including bedding in cement mortor on to dwarf wall or including fixing centilever brackets over all size 915 mm x 460mm bowl size 410 mm x 330 mm x 160 mm and including 38/40mm dia waiste pipe complete all as specified and directed.
S&F stainless steel plate rack 1mm thick of size 750X600x250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces all complete as specified and directed.
S&F Glass shelf of size 500mmX125mm consisting sheet glass with CP brackets and CP frame Size 500mm long complete.
Disconnecting existing tank of capacity exc.250 & n.exc 500 ltrs, setting aside lowering if required for repairs cleaning etc and hoisting if required reconnecting and refixing in position
S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed.
M&L 20 mm thick granite tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen slab.complete all as specified and directed.
M&L applying three coats of white wash on newly plastered surfaces on wall after necessary preparation of the surface, complete all as specified and directed.
M&L preparation of old decorated surface of walls by brooming down and wire brushing etc and applying two coats of white wash on wall complete all as specified and directed.
M&L for preparing newly plastered surfaces of wall and applying distemper oil emulsion two coats on 3mm thick wall care putty (in two layers) including priming coats complete .
Complete removal of existing treatment of walls/ ceiling and applying two coats of distemper oil emulsion over 3mm wall care putty (in two layers) including priming coats complete .
M&L Preparation of old plastered or unplastered surfaces of ceiling and applying two coats of white wash to ceiling complete all as specified and directed.
M&L preparing the newly surface of any description not otherwise described over 10 cm width or girth on steel surface and applying two coats of synthetic enamel paint over one coat of zinc chromate primer all as specified and directed.
M&L preparing the new plastered surfaces of wall and applying two coats of cement base paint of any colour over one coat primer complete
M&L complete removal of existing treatment on walls and applying two coats of weather proof exterior emulsion of approved colour complete.
Roughening sufaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust.
M&L 10 mm thick cement plaster in CM (1:4) for backing of tiles complete all as specified and directed.
M&L coloured glazed ceramic tiles in vertical surface 300x450x7to8mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed..
M&L 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified.
M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18sqm infloor etc;set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.
M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.18 sqm but n.exc 0.38 sqm in floor etc;set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete .
M&L machine cut Kota stone slab flooring 18-20 mm thick (square or rectangular size.) over cement screed bed laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
All as per item No 94 above but on vertical surface as dado/ skirting.
S&F brass CP tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and as directed.
S&F mild steel, chromium plated with fixing brackets, tops, rollers etc fixed in position including fixing decorative type bracket complete s.
Removing/taking down of old water proofing treatment from roof/concrete surface removal to distance exc 250mtr and not exxc 500mtr from the site & cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete.
M&L roof treatment in repair by complete removel of existing old treatment and treated with following specifications :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying a tack coat of hot air blown bitumen of grade 85/25 in two coats each coat @ 1.2 Kg/Sqm, 1st on bitumen primer and 2nd on polymeric water proofing membrane complete. (e) Applying water proofing membrane not less than 4 kg/sqm in weight, sealing as directed at site with 100 mm over laps as per manufacture's instruction. (f) Applying one coat of aluminium paint @100 gm/Sqm over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item.
Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store in safe custody or for taking credit and making good distrubed surfaces of walls, floors etc Complete all as specified and directed.
M&L point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated and FR multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade dwawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete including 1.0 sqmm copper stranded earth wire for all as specified for the following :-
One light point controlled by one switch.
One fan point controlled by one switch.
One bell point controlled by one switch.
One socket outlet 3 pin 5 Amp controlled by one switch on the same board.
One socket outlet 3 pin 5 Amp controlled by one switch on indepdendent board.
M&L point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade drawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 6 Pin 15 Amp socket outlet controlled by one switch on independent board.Incl. 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board.
Supplying and fixing angle holder, insulated polycabonate body with back plate complete.
Supplying and fixing switch piano flush button single pole one way 5/6 amp complete.
Supplying and fixing switch socket combination two in one 5 and 15 Amps multipurpose flush type universal 240Volts.
Supplying and fixing switch socket combination two in one 5 Amps multipurpose flush type universal 240Volts.
Supplying and fixing socket outlet 2 in 1, 5 pin, 5/6 amp, flush type complete.
Supplying and fixing ceiling rose 63 x 25 mm three terminals complete.
Taking down U/S fan regulator and Supplying and fixing hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. .
M & L in repair for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4 Sq mm (FRLS) of continuous earth wire green in colour complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 sqmm cable & One run of 4 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)
Supplying and fixing integrated LED Bulb 9 watt complete.
S & F in repair box type fitting 1 x 18w, blue coloured end caps, prewired for LED tube including LED tube 16watts, including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Supplying and fixing powder coated, CRCA steel sheet MCB distribution board double door (minimum thickness 1.2 mm & constructed as per IS : 8623), degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required of following ratings & ways:-
SPN, 240 volts, 4 ways.
SPN, 240 volts, 8 ways
Taking down U/S MCBs/ELCBs with incoming and outgoing controls any make, any capacity after disconnecting complete all as specified and directed.
S&F MCB SPN 6A to 40A 240V 9KA
S&F MCB SP 6A to 32A 240V 9KA
S&F Exhaust fan 300 MM sweep heavy duty fan including cutting and chesing ,making hole for fixing complete all as specified and directed.
M&L Bell push , flush type , 5 Amp complete all as specified and directed.
S&F Bell , AC 230 Volts single pole complete all as specified and directed.
M/S JAI MATA DEE CONTRUCTION CO.
M/S VIKAS CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .