Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC 11 1 7 P D KYDGANJ PRAYAGRAJ U P PIN 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.2 L+₹44,272 (2.24%)Rejected-Finance 22B HEMILTAN ROAD GEORGE TOWN PRAYAGRAJ UP 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹22.4 L+₹2.7 L (13.5%)Rejected-Finance H NO 02 BALLUPUR ROAD DEHRADUN UK PIN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-Finance Other than L1 | |
| 4 | L3₹23.5 L+₹3.8 L (19.4%)Rejected-Finance 139 11 104 MUTTHIGANJ ALLAHABAD UTTAR PRADESH 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L3 | Rejected-Finance Other than L1 | |
| 5 | L4₹22.8 L+₹3.1 L (15.7%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
REPAIR AND MAINTENANCE OF B/R WORK IN OTM ACCN AT CHHEOKI
2023_MES_600838_1
8619/E8
Open Tender
Civil Works
Item Rate
270 days
GE WEST PRAYAGRAJ
As per tender Documents
8 documents required · 8 mandatory
₹500
GE WEST PRAYAGRAJ
₹70,000
Yes
26 Jul 2023
3 Jun 2023
27 Jun 2023
3 Jun 2023
26 Jun 2023
14 Jun 2023
Amount
Demolition of brickwork built in cement or cement lime mortar complete all as specified and directed
M&L for brick work with fly ash old size bricks straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
All as per Sl item No. 2 but except brick complete. Note:- Bricks obtained from demolition shall be used.
Dismantling of AC sheet corrugated/semi corrugated sheets in wall cladding or in roof covering including ridge complete all as specified and directed.
M&L 6mm thick asbestos cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed.
Fixing only 6mm thick Asbestos fibre cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed. NOTE: Asbestos sheets retrieved from dismantling shall be used.
S&F 6mm thick non-asbestos fibre cement two piece serrated ridges for corrugated or semi-corrugated sheet fixed with 'L' hooks or 'J' hooks or cranked hook bolts complete all as specified and directed.
All as per Sl item No 7 above but fixing only. NOTE: Asbestos ridge retrieved from dismantling shall be used.
Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified.
M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roof covering complete all as specified and directed.
M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed..
M & L Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling, floor hearth or wall tiling including cement mortar bedding and removing off rubbish from the premises complete all as specified and directed.
M&L for joint free non skid Ceramic coloured tiles, 7 to 8mm thick (square/ rectangular) , area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for joint free non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for joint free non skid, ceramic “coloured” tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for joint free non skid, Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L joint free vitrified ceramic coloured tiles of 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 300 mm x 200 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 7 to 8mm thick area of tile exceeding 0.13 and n.exc 0.18 Sqm in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.
M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for Granite 20mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 25 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
S&F Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F Steel water tubes, medium grade, ISI marked, galvanised, 25 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.
Refixing old 15mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.
Refixing old 20mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.
Refixing old 25 mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.
S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.
S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.
S&F in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.
S&F in repair CP Stop valve / angle valve 15 mm bore, fancy type chromium plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed.
S&F in repair rotational moulded, multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F in repair rotational moulded, multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F in repair PVC waste pipe 32mm dia, 60 cm long for WHB/ urinal with cup, complete all as specified.
S&F in repair PVC waste pipe 40mm dia, 60 cm long for Sink with cup, complete all as specified.
S&F in repair PVC connection 15 mm size with P.T.M.T nuts of length 450mm complete all as specified .
S & F in repairs wall mixer with provn for over head showers with 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed
S&F Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms).
S&F in repairs Ball Valves 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms).
S&F in repairs Ball Valves 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 25mm-315gms).
S&F in repair PVC valve, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including brocket complete all as specified.
S&F in repair for grating doom 100 mm dia of PTMT.(Minimum weight 25gms)
S&F in repair bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.
Demolition and breaking up drain waste pipes (SGSW, AC or RCC, PVC ) of internal dia 75/110 mm, set in cement mortar complete all as specified and directed.
S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110 mm bore complete all as specified and directed.
S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius, 75 mm bore complete.
S&F PVC (SWR) bends any radius, 110 mm bore complete.
M&L for running welding in repair thickness of metal to be welded exceeding 6 mm but not exceeding 9mm complete all as specified & directed.
M&L for water proofing treatment to sunken floor with polymeric water proofing membrane after cleaning the surface by wire brushes , brooming , removing dust and applying treatment as under :- (a) M&L Plastering 15mm thick in CM 1:4 using 100% coarse sand on roof including WPC 3% by weight of cement. (b) Applying a coat of bitumen primer conforming to IS-3384 - 1965 @ 0.50 lit/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/25 as per IS-702-1988 @ 1.20 Kg/Sqm of each coat applied over primer incl cleaning of surfaces . (d) Supply and laying polymeric water proofing membrane of 3mm thick with consists of a centre core 90 micron thickness molecular high density polyethylene film protected on both sides with a high quality polymeric asphaltic mix will be protected on both sides with20 micron HMHDPE film, weight not less than 3.00 Kg/Sqm over area including overlapping as per manufacturers instruction. (e) M&L for applying a tack coat of hot blown bitumen as per IS 702-1988 applying evenly on top of polymeric water proofing membrance @ 1.20 Kg/sqm. (f) M& L for blending of course dry sand @ 0.75 KG/Sqm
S&F in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.
S&F in repair vitreous china urinal, bowl type, of size 465X355X265 mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.
S&F, in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.
S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.
S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom & cover and aluminium anodised hinging device and fixed WC pan complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering on other than fair faces of brick wall in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick wall or concrete in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for 5mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of cement wash complete all as specified and directed.
M&L for preparation of new plastered surfaces , applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade complete all as specified and directed.
M&L for preparing of new plastered ceiling surface and applying two coats of white wash complete all as specified and directed.
M&L for preparing of new plastered wall surface and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old distempered surface of wall including cornices etc. by washing, rubbing down, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and stopping of distempered surfaces and applying one coat of oil emulsion distemper of approved shade complete all as specified and directed.
M&L for preparing old plastered decorated surfaces of wall and applying two coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.
M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old surface of ceiling making surface even and smooth and applying one coat of white wash over & including 1 mm wall care putty complete all as specified and directed.
M&L for preparation of old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed.
Taking down door chowkhat with shutter area not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified & directed.
Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.
Taking down shutters of wooden or aluminium door of any description not exceeding 1 sqm each complete all as specified & directed.
Taking down shutters of wooden or aluminium door any description area exceeding 1 .0 Sqm and not exceeding 2.0 Sqm each complete all as specified & directed.
Taking down wooden or aluminium door shutters of any description not exceeding 1 Sqm each and refixing in the same opening after easing and adjusting including builders hardware as required and renewal of unserviceable screws complete all as specified & directed
Taking down wooden or aluminium door shutters of any description exceeding 1 .0 Sqm and not exceeding 2.0 Sqm each and refixing in the same opening after easing and adjusting including builders hardware as required and renewal of unserviceable screws complete all as specified & directed
S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.
S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides including 5mm thick teakwood leaping alround complete all as specified & directed.
M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast, Coping errection of posts etc complete all as specified & directed.
M&L mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F of 35 mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.
S&F of 30mm thick 2nd class hardwood glazed and skeleton window shutter divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) complete all as specified & directed.
S&F Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified & directed.
S & F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified & directed.
S & F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete without glazing bar, dovetailed or welded complete all as specified & directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed.
S&F solid prelam moulded PVC double door frame of size 50mm x 95mm made single side prelam PVC sheet used instead of plain colour PVC sheet all as specified & directed.
S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube complete all as specified and directed
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed
S&F Anodised aluminium frame for doors, windows, ventilators, partition, posts to sustain curtain rail etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges, anodised aluminium snap beading screws with provision of double action floor spring etc complete all as specified and directed.
S&F Anodised aluminium window and ventilator, side hung type, without sash, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long(1No), hinges type B 21 100mm long( 2 Nos) suitable handle (1No) complete all as specified and directed.
M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed
M&L for preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed.
S&F for galvanised M S wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.
S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.
S&F in repair 18/19mm thick prelaminated medium density fibre board, commercial type, interior grade adhesive as in cup board shutters/ shelves and pelmets etc., fixed with screw/ nails including 4mm thick teak wood lipping duly French polished alround complete all as specified and directed.
S&F in repair 18/19mm thick prelaminated particle board, interior grade,(one side decorative and other side balancing white), flat pressed, single or three layer type with BWR adhesive fixed to Timber frame work etc., fixed with screw complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.
S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.
M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.
M&L for 4mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified & directed.
S&F for 6.30mm thick sheet glass ordinary quality and glazing with rubber beading/gasket in square exc 0.5 sqm in each pane complete all as specified & directed.
S&F in repair Mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and CP brass brackets (wall to wall or flush to wall) for securing to curtain rod complete all as specified & directed.
S&F in repair floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. (Make- Sandhu/Samrat)
S&F in repair Aluminium Lock,4 Lever,100mm long fixed to Aluminum doors complete all as specified and directed Make Godrej/Link
S&F in repair 100mm mortice lock four levers (vertical type), of brass body complete all as specified and directed
S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed. Make Sandhu/Samrat
S&F 300mm long MS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple.
S&F MS butt hinges cold rolled medium weight of size 100mm etc complete all as specified & directed.
S&F MS 150 mm pressed handles oval type stove enameled black complete all as specified & directed.
S&F for MS barrel tower bolts of extruded section 200 mm long complete all as specified & directed.
S&F in repair 300mm long MS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple.
S&F in repair 300mm long aluminium alloy anodised sliding door bolts , with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified and directed .
S&F in repair MS butt hinges cold rolled medium weight of size 100mm etc complete all as specified & directed.
S&F in repair Aluminium alloy handles 150 mm long fabricated type complete all as specified & directed.
S&F in repair aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified & directed.
M&L for Mild steel plain black sheet 1.25 mm thick in hearths; covering to door shutters; ducts, etc, cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets, fixed to wood or steel members with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, etc as required all as specified & directed.
S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified and directed.
S&F 100mm long aluminium alloy handle cast type anodized. complete all as specified and directed
Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.
M & L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/ Cement mortar 1:3 complete all as specified and directed with following:- (a) M & L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25 x 25 mm x 0.5mm (b) S & F 1.6mm dia GI wire suspenders with adjustable clamps and dash free fasteners with rawl plug and screws plugging in RCC slab placed @ 605mm centre to centre from perimeter of wall. (c) S & F 25x25x0.5mm thick GI tee powder coated as main and cross members at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S & F 4mm thick E-boards of approved texture and finished ceiling tiles of size 595 mm x 595 mm , confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE NOTE: The complete ceiling work shall be done as per manufactures instructions.
S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.
S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.
M&L for PCC type E2 1:5:10 using 40mm graded aggregate as in sub base complete all as specified and directed
M&L for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in flooring complete all as specified and directed.
Demolition of Stone slabs and tiles laid dry and dry or pointed of any description or thickness in floors, aprons etc.
M&L for 80mm thick M-40 grade factory made rubber moulded vibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete including dismantling of tiles complete all as specified and directed
M&L for rubber moulded chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of tiles complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping ( whether full thickness removed or only a part thereof) complete all as specified & directed.
Removing of surplus excavated/demolished materials to a distance n.exc 50m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.
M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. Note - Average thickness shall not exceed beyond 40mm.
M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:4 complete all as specified and directed.
M&L for water proofing treatment on roof slab with polymeric water proofing membrane complete & consisting with the following manner :- (i) Cleaned the surface by removing all dust, fungus, moss and other foreign material etc by using wir brush & dusting (ii) Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Lt/ Sqm on the surface. (iii) Laying 3mm thick APP membrane having non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm i.e. overlap & 150mm end overlap, sealing all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. (iv) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane. (v) Dusting dry sand @ 0.75 Kg per Sqm over the membrane indicated above. Note:- The laying of the membrane shall be done through authorized applicator of the manufacturer's
M&L for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of aluminium paint complete all as specified and directed.
S & F in repair waste coupling of CP (half or full threaded) (minimum weight 32mm- 45gms/40mm-60gms of 32mm dia for WHB complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Taking down hood cover of rolling shutters, cleaning thoroughly, greasing the moving parts like ball bearing, Helical springs, guide channels ets of the existing rolling shutters including making straight guide channel and replacing the damaged parts if required like spring, ball bearing etc to make the rolling shutter fully functional complete all as specified and directed. Note:- Required parts shall be measured & paid separately as supply only under respective item.
Supply only new helical steel spring 45 cm long of existing dia and gauge (not less than 4 Kg each) complete all as specified and directed.
S&F in repair steel rolling shutters without ball bearing including top cover anchoring rod, hasp and staple and one shop coat of primer, erected in position push pull or mannual type thickness of laths 1.00 mm including taking down old unserviceable rolling shutters complete all as specified and directed.
All as per Sl item No. 152 but gear operated type with bevel gear box and crank handle.
Supply only safety lever locks mild steel with 4 levers for rolling shutters
Supply only Ball bearing for rolling shutters (Make-NBC/SKF/TATA)
S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.
S&F in repair stainless steel soap dish fixed to plugs with chromium plated brass screws complete
S&F in repair jet nozzle for EWC complete with all fittings complete all as specified and directed.
S&F in repair two way angle valves /tap with flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair toilet paper holder, superior quality, brass chromium plated, fancy type complete all as specified and directed. Make: Prayag/ Ideal Orient/ Plumber.
S & F in repair Brass CP central hole mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete.
S&F in repair health faucet with 1m long flexible CP pipe with wall hook complete with all fittings complete all as specified and directed.
S&F in repair Brass chromium plated shower rose 65 to 90 mm size , shower Arm with swivel joints complete all as specified and directed.
Cleaning and removing all scale and dirt, mosses completely from internal surface of water storage tank of 250 to 500 ltrs capacity and from mouth of circulating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY pattern and refixing the cover after cleaning complete all and specified and directed.
Cleaning and removing all scale and dirt, mosses completely from internal surface of water storage tank of 500 to 1000 ltrs capacity and from mouth of circulating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY pattern and refixing the cover after cleaning complete all and specified and directed.
M/S VIVEK DUBEY
M/s VIJAY TRADERS
Vibha Enterprises
DK Builders
SUNIL ENTERPRISES
Comnet technologies
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .