Spl repair to Offrs Md Accn Bldg No NP-31, Site-10 Jhoke Rd and Addn/ Altn to OR bathroom of Bldg No P-09 of GRENADIERS under GE (East) Ferozepur Cantt

Amount

M&L for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified & directed.

M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified & directed.

M&L Rendering 5mm thick in cement mortar (1:3) on any face of brick walls or conrete surfaces, in ceiling, soffits of chajja or similar location etc including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces and applying two coats of white wash on ceiling surface complete all as specified & directed.

S& F for wire netting of Size of mesh in 25mm galva nised steel wire, 1.23mm dia fitted in ceiling and wall before plastering complete all as specified and directed.

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified & directed.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified & directed.

All as per item no 06 above but reuse bricks in any specification and in any position retrieved including cleaning and removal of mortar from old bricks. complete all as specified & directed.

M&L for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) & Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified & directed.

M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) & Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified & directed.

M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices. Complete all as specified & directed.

M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on ceiling surfaces. Complete all as specified & directed.

M&L Complete removal of existing treatment of wall suface and applying two coats of oil bound distemper, over 2mm thick wall care putty, complete all as specified and as directed.

Complete Removal of existing treatment of walls applying two coats of cement based paint over one coat of chalk white primer on plastered surfaces all as specified and directed.

M&L for preparing old plaster surfaces of walls applying one coat of exterior emultion paint complete all as specified and directed.

Demolition of reinforced cement concrete concrete in any description and in any position not otherwise specifically provided for complete all as specified & directed.

M&L for cement concrete type B1 1:2:4 using 20mm graded aggregate nominal mix in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) in rough finished flat concrete surfaces complete all as specified & directed.

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ccomplete all as specified & directed.

M&L for 40mm thick cement concrete type B-1, 1:2:4 using 20mm graded crushed stone aggregate in sub base in floors complete all as specified and directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing coat 10 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

S/F of Glazed coloured and cereamic tiles in vertical surfaces 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed.

S&F for Vitrified ceramic tiles 9-10mm thick (Square/rectangular)polished area of each tiles n.exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises. Complete all as specified & directed.

M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed

Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc. Complete all as specified & directed.

M & L for 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L Machine pressed precast conctete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement and no pigment used, excluding laying of sand cushioning complete all as specified and as directed. Note :- Sand will be measured and paid seperately

M&L for 100mm thick cement concrete type D- 2, 1:4:8 using 40mm graded aggregate in sub bases in floors, hardstanding complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats,bed blocks, coping, hold fasts etc including necessary form work complete all as specified & directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.

All as per item No 31 herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each. Complete all as specified & directed.

S&F for Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified & directed.

All as per item no 33 above here-in-before but size 125x60mm with double rebate. Complete all as specified & directed.

Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) Complete all as specified & directed.

PTMT tower bolts, 150 mm long and fixed with steel screws Complete all as specified & directed.

PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin Complete all as specified & directed.

PTMT handle 125mm long fixed with steel screws Complete all as specified & directed.

S&F 30mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats. Complete all as specified & directed.

S&F 30mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.

S & F Factory made double rebate box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle, with & Without glazing bars, one side wiremesh shutter without glazing bar & other side glass shutter with glazing bar including 6mm mild steel guard bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. Note : Wiremesh and glass will be measured seperately

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded,grills/guard bars shouldered with steel ventilator frames and with one shop coat of zinc chromate primer Complete all as specified & directed.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified & directed.

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, including dismantling of boarding, any description,, fixed in any position complete all as specified and directed.

S&F in repair Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws Complete all as specified & directed.

S&F in repair Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws Complete all as specified & directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm Complete all as specified & directed.

S & F Galvanised mild steel wire cloth 0.48mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples Complete all as specified & directed.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 100mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Complete all as specified & directed.

S&F 300mm mild steel ordinary rat rail rod pattern springs including roller and roller plate Complete all as specified & directed.

S&F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall , overall size of sink 495mmx420mm, bowl size 410mmx330mmx 160mm as in repair Complete all as specified & directed.

S&F in repair for 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as specified and directed by Engineer-In-Charge.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F for unplasticised 15mm dia PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed Complete all as specified & directed.

S&F in repair 15mm bore stop valves of cast copper alloy (concealed type), screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup Complete all as specified & directed.

S&F in repair 15mm bore stop valves/ angle valve CP of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup Complete all as specified & directed.

S&F in repair 125mm dia CP brass shower rose with or without swivel joints, any size including fixing to steel pipe or union Complete all as specified & directed.

S&F in repair CP fancy type Bib tap, 15mm bore, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified & directed.

S&F in repair 15mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, Complete all as specified & directed.

S & F in repair of CP WHB mixer 15mm bore mixing and hot and cold water scrwed down for iron pipe and fixed. and waste system with 450mm long braided hoses Complete all as specified and directed by Engineer in Charge.

S&F in repair Health Faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mm long flexible tube and ABS wall hook including making connections and fixed in position complete in all respact as specified and directed.

S&F Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm PVC float valve high pressure with polythene float valve & taking down old PVC water tank complete all as specified and as directed

S&F in repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed

S&F PVC connection both end brass union and length 450 mm long for 15 mm bore pipe Complete all as specified & directed.

S&F CP tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F Vitreous china white wash down water closet including PVC sheet cover, Jet and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, Complete all as specified & directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, Complete all as specified & directed.

S&F Wash hand basin,pedestal type flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair Complete all as specified & directed.

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls including taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls including taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 75mm dia PVC (SWR)with access door bends any radius Complete all as specified & directed.

S&F 110 mm dia PVC (SWR)with access door bends any radius Complete all as specified & directed.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Complete all as specified & directed.

S & F for Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge .

S & F for Gypsum Board 8 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm, Sub tee 23mmX23mm) incl mild steel snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge. Note:-The hanging stay wire shall not be less than 4.00mm thick all are included in the above mentioned item only.

Dismantling of brick tiles or terracing tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and directed

Demolition mud phuska in roofs, any thickness, including plastering and leeping etc complete all as specified and directed

Roughening surfaces of old concrete floor/ roof for removing old bitumen coat/ any other type of treatment etc., by picking, sweeping clean and washing down with water to remove dirt/ dust etc, including rendering 10 mm thick cement plaster on roof surfaces in cement mortar (1:4) and applying evenly a tack coat of industrial bitumen 85/25 @ 1.5 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces Complete all as specified & directed.

M&L for polythene film, 150 micron thick, laid on roofs with 150 mm overlaps laid on roofs & 80 mm thick average consolidated thickness mud phuska on flat roofs including 25 mm thick mud plaster and 3 mm thick leeping plaster etc complete all as specified and as directed.

M&L 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement, on mud phuska complete all as specified and directed.

All as per srl item No 91 here-in-before but using old brick tiles retrieved from dismantling (item No 87 above here-in-before) including cleaning and removal of mortar from tiles complete all as specified and directed.

M & L PCC (1:2:4) type B-O using 12.5mm graded stone agg as in haunching ,kerb in roof or similar work compl all as specified & directed.

M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete complete all as specified and directed by Engr-in-charge.

S&F Mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-charge.

S&F for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron work or mild steel work of any description and S&F Framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces Complete all as specified & directed.

Demolation of unreinforcement cement concrete of any description and in and position not otherwise specially provided for or as in Sunken & roof kerbs Complete all as specified & directed.

M&L Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete, as in filling under sunken floor portion Complete all as specified & directed.

M&L for Rendering/plastering, 10 mm thick in cement mortar (1:3) on concrete surfaces of sunken floor with WPC compound and applying bitumen blown any grade applied two coats to concrete surface / rendering at the rate of 1.5 kg per sqm per coat and treating the sunken floor complete all as specified and directed.

M&L APP modified polymeric membrane with mineral finish on top min 3 mm thick & weighing n. less than 3.5kgs/sqm with mineral reinforced with polyster non-woven fabric(wt n.less than 150gm/m2) laid over cold bituminous primer by torch application method with min overlap of 75mm on longitudinal direction & 100m in the transverse direction complete all as specified and directed.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius including demolition of brick work built in cement mortar of any specification and in any position Complete all as specified & directed.

M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material & labour for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

S/F of Glazed coloured and cereamic tiles in vertical surfaces 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed.

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls. complete all as specified and directed.

Preparation of new surfaces of wall and applying two coats of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and directed.

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified and directed.

M & L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite Complete all as specified & directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.

S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in Repair to Viterous China bowl urinal flat back, size of 465 x 355 x 265 mm white (miniumum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing aroiund urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair 15 mm bore Bib tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule. complete all as specified and directed.

S&F in repair stop cock standard 15 mm cast copper alloy cromium plate screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed.

S&F in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes as complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends/shoe/tee any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed

S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity,and meters and making good disturbed surfaces and matching with existing complete all as specified and directed.

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified and directed. for following : (a) One light/fan/bell/Bldg security light point controlled by one single pole one way switch.

All as per item No. 135 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board. complete all as specified and directed.

All as per item No. 135 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on same board. complete all as specified and directed.

All as per item No. 135 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC FRLS insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC FRLS insulated, unsheathed,stranded copper conductor cable. complete all as specified and directed.

All as per item No. 135 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC FRLS insulated, stranded, unsheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC FRLS insulated, unsheathed,stranded copper conductor cable. complete all as specified and directed.

S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F Bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F Door Bell, AC, 230 volts, single pole, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F batten holder, 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified and directed.

S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 12 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F MCB SPN, 32 Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning complete all as specified and directed.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning complete all as specified and directed.

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed.

Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.

M&L for disconnecting electric meter of any cap and refixing same after rewiring, in meter box including complete all as specified and directed.

Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified and directed. Note : Ceiling fans obtained/ taking down from item Sr No. 133 as above

Supply, fixing connecting and testing energy efficient (BEE 5 Star rated) electric water heater vertical storage type of 25 Ltrs capacity with stainless Steel inner tank, brass assembly, pressure release valve, heating element 1500/2000 W including all other accessories with high quality external finishes single phase with working Voltage 240 volts, 50 Hz, ISI marked complete all as specified and directed. Note: The cost of fixing of geysers including NRV,stud/ nuts/fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface is deemed to be included in the unit rate quoted.

Supply and fix Galvanised iron steel tubing medium grade of size 20mm complete including cutting of existing pipe line for jointing with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers,laid on wall and making good to the disturbed surface after making hole,complete all as specified and directed.

Supply and fix Galvanised iron steel tubing medium grade of size 15mm complete with all fittings such as bend, tee, reducer, elbow and union of require size including fastners, bolts, washers ,laid on wall and making good to the disturbed surface after making hole,complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy fancy type, chromium plated screwed down, high pressure with crutch or butterfiy handle screwed both side for iron pipe 15 mm bore complete all as specified and directed.

Supbly and fixing PVC connection 15mm size with brass nuts of length 600 mm for Hot/cold water supply complete all as specified and directed.

Supply and fxing bib tap fancy type cast copper alloy with crutch or butterfly handle, screwed down with chromium plated for iron pipe 15mm dia complete all as specified and directed.

Supply and fixng Sheet metal enclosure with socket plug Top and MCBs single pole and neutral enclosure with a two pin and eath plug socket complete with one single pole MCB of 20 Amp 'B Series capacity including fastners, bolts, washers. and making good the disturbed surfaces to match with the existing surface complete all as specified and directed.

S&F 20W, 6500K, 4 feet LED Inverter tube light fitting, with Back-Up of 4 hours, Auto Cut-off after Full charge, VSP of 3.5 kV energy efficient, 240 volts, fixed on wall/ ceiling etc complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty 16 sqmm cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed inservice connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and directed.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

M/s Bansi Lal (BID ID -3347240)

SATIJA BUILDERS (BID ID -3347471)

M/S Yashpaul Gulati (BID ID -3343634)

MS CHARANJIT SACHDEVA (BID ID -3344045)

JAWAHAR CONSTRUCTION COMPANY (BID ID -3343824)

B.L. Chaudhri and Co. (BID ID -3347532)

M/s S B Construction Company (BID ID -3348235)