CONSTRUCTION AND SHIFTING OF HT/LT LINE

Amount

(A) Safe loading & carriage including Loading-unloading & proper stacking of following store materials from ESC Tripula to site of work.

S.T. Pole 11 Mtr. Long

8.5 Mtr long PCC Poles

LOOSE LINE MATERIAL INCLUDING ACSR DOG CONDUCTOR (750 Mtr.), AB CABLE OF SIZE (3X120+1X70+1X16) Sq. mm (2000 Mtr.), 11KV HT XLPE CABALE OF SIZE 3X185 Sq mm (2500 Mtr.), LT ALLUMINIUM CABLE 1X630 SQMM ( 100 Mtr.), 11KV PIN INSULATOR WITH PIN, 11KV DISC FITTING 45KN, TOP CHHANEL, M.S. T-OFF CHANEL, STAY COMPLETE, EARTHING COMPLETE, G.I. WIRE 6SWG, M.S. DROPER CHANNEL etc.

ERRECTION

Errection of 8.5 Mtr long PCC Pole including digging of Pits & fitting of accessories.

Errection of D/P by 11 Mtr Long ST Pole including digging of Pits & fitting of accessories.

Grouting of Poles as per RESSPO norms with grouting materials.

Earthing of poles as per RESSPO norms.

Digging of pits, fixing nozzling & grouting of 11KV stay rods as per RESSPO norms including grouting materials.

Laying, stringing & sagging of 3Ø3wire 11 kv HT line by ACSR Dog conductor including all associated works & making clearance of road with joints/jumpers & binding on insulators as required as per RESSPO norms.

Laying ABC of size (3X120+1X70+1X16)SQMM. complete in all respect as per RESSPO norms

Laying of 11KV. XLPE cable of size 3X185 mm2 in double circuit (main+stand by) under ground by drilling method through drilling machine with all related works and complete in all respect as per RESSPO norms.

Installation of cable box 11 KV (3X185) sq mm Outdoor. Complete in all respect.

Fixing of Danger Board. Complete in all respect.

Mounting of LT DB box. 3 Phase Complete in all respect.

Construction of plinth of size 2x2x1.5 Mtr. for mounting of 250/400 KVA T/F. complete in all respect as per RESSPO norms required material will be provided by the contractor.

Fabrication of wiremesh fancing of size 2.5x2.5x2Mtr. By M.S angle of size 35x35x5mm and MS flat of size 25x5 mm with wiremesh and each of the same grouted with grouting material.

Digging of 2X60 feet deep boring type earthing neutral and body of distribution T/F at different places and welding of G.I strip including the cost of M.S. pipe 1.25 Inch dia, 2*40 feet long and MS strip 25*3 mm of suitable length for connecting M.S pipe to neutral through proper welding or bolt and nut. All material, consumables and T&P will be privided by contractor.

Painting of Pole with Red oxide & Aluminium Paint.

Drilling of road at various places for road crossing.

Un-Mounting & Shiffting of 250/400 KVA T/F from Plinth & then Mounting the same on New Plinth. Complete in all respect.

Dismantling of HT/ LT line (Approx.)

Safe cortage of received back material/Scrap from work site to ESC Tripula Raebareli.

Fixing of Sign board for under graound cable.

Construction of Henely type tailles fuse unit 500Amp. for 250/400KVA Distribution Transformer Sub-Station

Construction of massonary type Distribution pillar box with first class brick ballast cement, couarse sand, local sand , bric ballast , and MS Round bar of 10mm dia including straight MS Angal 50X50X6X750 mm for 400 KVA LT Substation (All the material will be arranged by the contractor)

Fixing of Henley type less Fuse unit 500 Amp, 650 Volt consisting of 6 Nos Brass Back entry, 6 Nos U-type Spny contact made of Copper, Brass coupling with Porcelain fitted on the GI sheet of 16 SWG with arrangement of 1 Nos Neutral link alongwith Copper bus-bar of size 750X50X6 mm made of electric copper strip for 400 KVA Transformer and required size GI Nut, Bolt and Washer with proper connection of LT single core PVC Cable of required size (cable will be provided by the department) (GI Nut, Bolt and Washer Will be arrange by the contractor).

Fixing of Copper L-piece suitable for 400 KVA Transformer of size 125X75X50X6 mm made of electrolite Copper strip (99.9% Purity) with required size (240/400 Sq. mm) Alluminium Crimping Lugs (99.9% Pure A-grade Alluminium). (All the material will be arranged by the contractor).

Repair & extension of existing wire mesh fencing around Transformer and Distribution Pillar Box with retaining Wall & 1 No. gate with locking arrangement made of MS Angle iron of size 50X50X6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50X6 mm. Wiremesh of size 10 SWG rectangle type, its painting as per norms of RESPO. (All the material will be arranged by the contractor).

PROVIDED BY CONTRUCTOR

M.S. HOLDING CLAMP FOR ROUND POLE

NUT AND BOLT OFF SIZE

LT DB BOX 3 PHASE WITH CLAMP

DANGER BOARD WITH CLAMP

LT CLAMP FOR ROUND POLE

CABLE BOX O/D 11KV OF SIZE 3X185 XLPE

ALUMINIUM LUG 630 MM

SHACKLE ISULATOR

L PIECE

TAIL LESS UNIT 500 Amp.

RED OXIDE PAINT

ALUMINIUM PAINT

GI PIPE 150 MM DIA

HDPE PIPE 200 Sq. MM

M/s Sharda Electrical

NATIONAL ENTERPRISES