INTERNAL/EXTERNAL PAINTING TO WALLS, CEILING, DOORS, WINDOW ETC INCLUDING PETTY REPAIR OF PLASTER ON WALL / CEILING FACIA OF CHAJJA BUILDING OF MD AND OTM ACCN AT 508 ABW AT CHHEOKI PRAYAGRAJ

Amount

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

Demolition of cement concrete in roofs, floors, beams, staircase, landing, chajjas and similar suspended works all as specified

Demolition of brick wok built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facing, dressed stone work, precast concrete article complete all as specified

M&L for brick work with sub class B, bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

All as per Srl item No. 4 here-in before but except bricks complete all as specified and directed. Note:- Brick obtained from demolition shall be used.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified

M&L Rendering 10 mm thick in CM 1:3 on ceiling surfaces to be finished even and smooth without using extra cement complete as all specified and directed by Engineer-in-Charge

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding bur not backing , and removing rubbish off the premises complete all as specified and directed.

Dismantling wrought iron or mild steel work, rolling shutters of any description not otherwise provided for complete all as specified and directed.

S&F steel rolling shutters (thickness of laths 1.25mm), without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete all as specified and directed.

M&L for glazed ceramic cloured tiles in vertical surface 350x250x7mm/450mm x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exc. 0.11 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding in CM 1:6 complete all as specified and directed

M&L for non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding in CM 1:6 complete all as specified and directed

M&L for glazed ceramic cloured tiles 300 mm x 200 mm x 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in cement mortar 1:4 finished rough to receive wall tiles etc.

M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying one coat of super coat acrylic exterior paint of approved make in required shade by paint sprayers machine over & including a layer of 1 to 2 mm thick putty to make the undulation free smooth finished surface complete as per manufacturer's instructions including tools, plants scaffolding & safety belts complete all as specified and directed

M&L for preparation of old existing surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying two coat of super coat acrylic exterior paint of approved make in required shade over a coat of primer by paint sprayers machine over & including a layer of 1 to 2 mm thick putty on existing surface etc as per manufacturer's instructions including tools, plants scaffolding & safety belts complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying one coat of oil emulsion distemper of approved make in required shade over a coat of primer by paint sprayers machine over & including a layer of 1 to 2 mm thick putty on existing surface etc as per manufacturer's instructions including tools, plants scaffolding & safety belts complete all as specified and directed

M&L for removing, scrapping & cleaning the existing plastered unplastered painted/ old painted surface by scrapping smoke soot, moulds and efflorescent salt and trading oil and greasy spots washing , rubbing down and stopping of distempered and painted by scrapping machine tool/electric hand grinder and cleaning the surface etc. and applying two coat of oil emulsion distemper of approved make in required shade over a coat of primer by paint sprayers machine over & including a layer of 1 to 2 mm thick putty on existing surface etc as per manufacturer's instructions including tools, plants scaffolding & safety belts complete all as specified and directed.

M&L for removing, scrapping & cleaning the old wooden painted surface completely & applying one coat of synthetic enamel paint on old painted surface of wood over a coat of pink primer of approved brand and shade etc. by mechanically by paint sprayers machine, repairing of scratches, if any, with standard putty & enamel paint, sand papering complete all as specified and directed

M&L for removing, scrapping & cleaning the old wooden painted surface completely & applying two coat of synthetic enamel paint on old painted surface of wood over a coat of pink primer of approved brand and shade etc. by mechanically by paint sprayers machine, repairing of scratches, if any, with standard putty & enamel paint, sand papering complete all as specified and directed

M&L for removing, scrapping & cleaning the existing old painted plastered surface including cornices & scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations etc completely and apply a layer of 1 mm thick wall care putty to make the surface even and smooth and applying one coat of white wash complete all as specified and directed

M&L for removing, scrapping & cleaning the existing old painted plastered surface including cornices & scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations etc completely and apply a layer of 1 mm thick wall care putty to make the surface even and smooth and applying two coat of colour wash complete all as specified and directed

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and stopping of distempered surface and applying two coat of oil emulsion distemper of approved shade on surface of wall complete all as specified and directed

M&L for preparation of old surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint, white or tinted mechanically by paint sprayers machine complete all as specified and directed

M&L for preparation of old surface of steel and iron materials by brooming down or steel wire brushing ,scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots of any description , not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted mechanically by paint sprayers machine complete all as specified and directed

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations by scrapping machine tool/electric hand grinder and making the surface even and smooth by applying a layer of 1-2 mm thick wall care putty and apply one coat of cement base paint white or tinted mechanically by paint sprayers machine complete all as specified and directed

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and removal of vegetations by scrapping machine tool/electric hand grinder and making the surface even and smooth and apply two coat of cement base paint white or tinted mechanically by paint sprayers machine complete all as specified and directed

Dismantling of wall and ceiling boards ( fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed

M & L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/ Cement mortar 1:3 complete all as specified and directed with following:- (a) M & L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25 x 25 mm x 0.5mm (b) S & F 1.6mm dia GI wire suspenders with adjustable clamps and dash free fasteners with rawl plug and screws plugging in RCC slab placed @ 605mm center to center from perimeter of wall. (c) S & F 25x25x0.5mm thick GI tee powder coated as main and cross members at 595 mm center to center supported suspenders along with adjustable clamp to maintain level. (d) S & F 4mm thick E-boards of approved texture and finished ceiling tiles of size 595 mm x 595 mm , confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE NOTE: The complete ceiling work shall be done as per manufactures instructions.

S&F 2nd class hard wood as in plain solid, straight chowkats and frames,wrought,framed rebated on the solid, rounded, or chamfered, put together with glue pinned at joints complete all as specified and directed

S&F of ply wood 6 mm thick 5 ply grade BWP, type BB ,fixed with screws to timber frame work complete all as specified and directed.

S&F in repair telescopic basket( channel) 18"/20" length extruded stainless steel over rollers of approved make complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, beam haunching,girders, bressumers, lintels, cantilevers, shelves, including support, overhangs etc complete all as specified and directed.

Form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20 cm wide all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sqm but not exc. 4.0Sqm each complete all as specified and directed.

Resecuring with out taking down chowkats or frames with shutters (without taking off shutters from the frame not exc 1.5 sqm each complete all as specified and directed.

Resecuring with out taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sqm but not exc 4.0 Sqm each complete all as specified and directed.

Taking down shutters of any description exc.1 sqm not exc. 2 sqm each complete all as specified and directed.

Taking down shutters of any description exc. 2 sqm each complete all as specified and directed

Resecuring or easing & adjusting without taking down of shutters exc. 1 Sqm but not exc 2 sqm each complete all as specified and directed

Resecuring or easing & adjusting without taking down of shutters not exc. 1 Sqm each complete all as specified and directed.

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed

S&F of factory made solid panel PVC door shutter 30mm thick (style) consenting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails& bottom rail on either side & as gap insert for top rail& bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to ythe style and rail with suitable PVC sheet, beading and joined together with solvent cement supplying and fixing in the frame at site as super specification & drawing complete all as specified and directed

S&F of IInd class hard wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass, gauge, etc,(without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc. Sizes of members of shutters as specified in SSR part -I section 8,clause 8.24(a) complete all as specified and directed.

S&F of 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F of framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk way, railings ,framework of water tanks and similar works conforming to Fe-290 gde E-165 complete all as specified and directed

S&F of mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mils steel wire(annealed) not less than 0.90mm dia oe securing with clips all as specified

M&L for cement concrete type B-1 (20 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapet and railing upto 60cm in height, copings, kneelers, apex stones, bed plate, kerbs and likes slightly rounded or chamfered complete all as specified and directed.

S&F in repair of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

S&F of framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with hinges or steel hanging door fittings or other covering running rails and guide and hanging apso fastening and fixing complete all as specified and directed

S&F in repair door closer hydraulically regulated made up of aluminium extruded section body universal type, suitable for door shutters of 851 to 1000 mm in width complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box ,main body with stainless steel cover, governing pivot made of brass other part made of mild steel heavy duty fixed to aluminium doors complete all as specified and directed.

M&L for refixing aluminium shutters of any description exceeding 1 sqm and not exc. 2.5 sqm each in the same opening after taking down ,easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed

S&F in repair chromium plated towel ring fixed with screw to wall complete all as specified and directed

S&F in repair for 18 mm thick prelaminated MDF board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in cup boards etc. complete all as specified and directed

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint on new wooden surfaces of any description overa coat of primer complete all as specified and directed

S&F in repair Mortice latch (length of latch 10mm) with two levers (vertical type), mild steel body and fixed complete all as specified and directed.

S&F of ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed

M&L for providing precast cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) set in cement mortar 1:4 louvers and jalies (curved, square, rectangular or any other desing or shape as per requirement) 35mm thick (measured solid) including all mouldings but excluding frame precast frame shall be measured and paid separately complete all as specified and directed.

M&L for providing precast cement concrete set in cement mortar 1:4 type B-1 1:2:4 (using 20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weathering, throating etc. and setting in mortar complete with joints to match.

M&L for reinforced cement concrete type B1 using 20mm graded aggregate as in slabs supported on walls, beams, and columns in floors, roofs landings, balconies ,canopies , deck slabs and in shelves and the like complete all as specified and directed

M&L for 18-20mm thick granite(of any type) work table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixureof pigment to match with shade of granite complete all as specified and directed

Hacking out old broken glass ( any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/ metal pins complete all as specified and directed

S& F of sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

S& F of figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

M&L for securing glass of any description and size in existing wooden frame/ metal frame glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebate, grooves, reputtying and painting/oiling puttied surface to match existing work complete all as specified and directed

S&F in repair steel window box type primer comprising ERW Hollow 'P' section of size 60 x 25mm of 1:25 wall thick frame angle rebated Skelton shutter made of ERW section 50 x 20mm of 1mm wall thickness and operated leaf side huge with two No's sash bars of "T" section 20 x 30 mm welded to frame of shutter and openable shutter prepared to receive sheet glass complete including cutting holes four prepared to receive sheet glass complete including cutting holes four Nos for each window and making good dismantling portion in PCC (1:2:4) TYPE B-1 including following fittings welded to frame/shutter :- (a) Hold fast 150mm out of 25x6mm flat iron made to shape 04 Nos for each window (02 Nos on each side). (b) Handle of 'Z' Section 20mmx25mm, 100mm long 01 No for each leaf. (c) MS tower bolt 150mm long - 02 NOs for each leaf. (d) 'Z' section 20 x 25mm, 100 mm long stopper 01 No for each leaf. (e) Cleat 55mm long of Hollow square section 15mm x 15mm of 24 gauge wall thickness. Welded to hinge of 55mm size 01 No for each leaf. (f) MS box type hinges of 75mm size - 03 Nos for each leaf. (g) Fabrication & fixing complete. Note. Glass panes & painting shall be measured & paid separately.

All as per Srl item No. 74 above but without sash bar to receive wire gauge complete all as specified and directed . Note:- Wire gauge & painting shall be measured and paid separately.

M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint on new wooden surfaces of any description overa coat of primer complete all as specified and directed

S&F of aluminium alloy, anodised sliding door bolt 200 mm long with haspe, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F of aluminium anodised barrel tower bolts of extruded section 150mm long fixed with screws complete all as specified and directed

S&F of aluminium anodised handle of extruded section 100mm long fixed with screws complete all as specified and directed

S&F of 100 mm long polished hard wood handle fixed with screws complete all as specified and directed

S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples, fixed in repairs complete all as specified and directed

S&F of floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel fixed in floor with overall length of cover plate 140mm fixed in repair complete all as specified and directed

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L- type or J- type or cranked hook bolts complete all as specified and directed

S&F in repair of 18 mm thick solid PVC prelaminated board of approved make and specification coloured as in shelves etc. complete all as specified and directed

S&F of 5mm thick PVC fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drg complete all as specified and directed

S&F of solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drgs complete all as specified and directed

M&L for cleaning of oxidation tank using mechanical process and required T&P complete all as specified & directed by Engr-in-charge.

Schedule of Credit (MINUS) Rs. 29750.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

Vibha Enterprises (BID ID -3064251)

Vijay Builders (BID ID -3062281)

Comnet technologies (BID ID -3064019)