Karnataka

Active

Works

Roads

REPAIR OF BRIDGE AT KM 7.20 OF BAGPUNI-MANIBANDA-GUNDYA-KULKUNDA ROAD IN BILINELE VILLAGE, NETTANA RAILWAY STATION JUNCTION-BOTTADKA-KEJALA JUNCTION- KOMBARU VILLAGE WITH CONSTRUCTION AND REPAIR OF SIDE DRAINS FROM KM 7.50 TO 9.00

Public Works Department

PWD Division Office Mangaluru | Dakshina Kannada, Karnataka

Amount: ₹29.7 LCloses: 6 Aug 20267d left

Timeline

Published22 Jul 2026
Closes6 Aug 2026
Bid Opening7 Aug 2026

Tender Value

₹29.7 L

EMD Value

₹59,500

Closing Date

6 Aug 2026, 10:30 pm7d left

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EXECUTIVE ENGINEER

Office Number

08242423169

Work Description

REPAIR OF BRIDGE AT KM 7.20 OF BAGPUNI-MANIBANDA-GUNDYA-KULKUNDA ROAD IN BILINELE VILLAGE, NETTANA RAILWAY STATION JUNCTION-BOTTADKA-KEJALA JUNCTION- KOMBARU VILLAGE WITH CONSTRUCTION AND REPAIR OF SIDE DRAINS FROM KM 7.50 TO 9.00

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT34899/CALL-2

Reference Number

PWD/2025-26/RD/WORK_INDENT34899/CALL-2

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mangaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

Requiredprofit and loss statement ,Balance sheets certified from an Registered Chartered Accountant

RequiredKPWD REGISTRATION CERTIFICATE CLASS III And above

RequiredExisting And Ongoing Commitments

RequiredWorkdone Certificate

RequiredAssessed Available tender capacity

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Estimate rates are excluding GST as per Common SR 2023-24 continued to 2025-26 and prevailing GST (18% of Amount Put to tender) amount is kept in the form of Lump sum in sanctioned estimate according to guidelines in Common SR 2023-24 (As per the circular from Govt of Karnataka no.12/2024 Bengaluru dt:09.08.2024). Therefore, Amount put to Tender and ECV amounts are excluding GST even though it is showing inclusive Tax in Draft Tender Schedule Process. Hence, GST will be paid separately for the quoted amount accordingly. The bidder has to quote the rate exclusive of GST and to submit a declaration which is duly signed by the bidder along with their tender proposal.

The contractor shall submit the details of technical staff employed by him.

The employer reserves the rights to reject one or all tenders without assigning any reason.

The employer is not responsible for any delay in accessing E- procurement portal.

Contractors should be registered with KPWD Class - III and above Registration and the tenderer should submit the Registration Certificate along with technical bid.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the original documents before approval.

Contractors should follow strictly prevailing rules of labour act.

The Item rates quoted shall include cost of Royalty charges on construction materials and other taxes as per rates provided in prevailing Govt orders at the time of execution and including cost and conveyance of all materials curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as directed by the Engineer-in-charge of the work.

All materials required for this work shall be procured by the bidder himself and should be got tested by the quality control authorities at his own cost before use on the work. Department will not supply any materials.

Materials like bitumen, steel,cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority at his cost before used on the work.

All documents should be uploaded by the contractor is to be attested by the authorized notary or not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when sought for .Failure to produce original documents leads to rejection of Tender.

Units, Rates and Prices shall be quoted by the tender in Indian Rupees only

The contractor should maintain the work during the defective liability period, i.e. UP TO 01 year at his own cost

Contractors should have Registration of GST, Employers Provident Fund and tenderer should submit Registration Certificate along with technical bid.

Payment of EMD of Rs. 59,500.00 shall be through E payment

The successful bidder has to follow the prevailing Government orders regarding Royalty Charges. The Contractor has to submit MDP Certificate along with the running contractor bills. Otherwise Department will take necessary action as per the Government Orders/Circulars.

The Contrctors has to quote the same rate to the same items of work that is to be executed at different chainage, if in case, the contractors quotes different rates for the same item appearing at different places of BOQ then,the lowest quoted rate for the same items will be considered for that particular item for evaluation and payment

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Past Experience

Section 2 ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-2026) (b) Should satisfactory completed as a prime contractor for at least one similar work to an extent of 50% of the cost of the work. Rs.14.83 Lakhs

Work Done Certificate

Capabilities of Vendor

3.3 Assessed available tender capacity - (AxNx2.5-B) where A -Maximum value of civil engineering works executed in any one year during the last five years (updated to current financial year price level)(FY in which tenders are invited) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B - Value, at Current Financial year (FY in which tenders are invited) price level, of existing commitments and on-going works to be completed during the UP TO 3 Months. (Period of completion of the works for which tenders are invited)

Others -- Existing & Ongoing Commitment Statement

Financial Status

Section 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-2026) (a) achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering works only) of Rs 29.66 LAKHS (usually not less than two times the estimated annual payments under this contract)

Others -- profit and loss statement ,Balance sheets certified from a Registered Chartered Accountant

Fee & Financial Details

Tender Fee Amount

₹750

EMD Fee Amount

₹59,500

Important Dates

Last Activity

22 Jul 2026

Published

22 Jul 2026

Bid Opening

7 Aug 2026

Download Ends

5 Aug 2026

BOQ Preview

•

BILINELE 35 LAKHS

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing, fitting and fixing mild steel railing complete as per drawing and Technical Specification. Ref to MoRT&H : IRC - 2703.2 & 1900 ---- including cost and conveyance of all materials a...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 ---- including cost and conveyance of all materials all lead and lift, loading and ...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

34899 bid document-kw-2 Cal-2.doc

Tender Document • 1.50 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].