SPL REPAIR TO BOUNDARY WALL AT DEMO BTY AND PROVN OF SURFACE DRAIN AT BLDG NO EB-116 AND EB-117 AT SINGLE LIVING JCOs ACCN UNDER GE (AWC) MHOW

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

M&L brick work with Fly ash brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

Removing excavated material rock n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specifed and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc., and including demolition of PCC, complete all as specified and directed.

M&L Formwork to sides and Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or tocantilevers, shelves including suports over hangs etc.

M&L Formwork to sides and soffits of floor or roof beams,beam haunchings, girders,bressummers, lintels, cantilevers, shelves including supports to over hangs etc.

M & L for RCC design mix M-25 as in foundation, footing, plinth beam etc complete all as specifed and directed.

M & L for RCC Design Mix M-25 as in columns, posts and struts complete all as specifed and directed.

M&L mild steel TMT steel bars in reinforcement 10mm dia and over cut to length bent to Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsshape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.