Certain repairs including periodical services to Central Institutes, APS and FAFS under AGE B/R-I, GE Gurdaspur.

Amount

Dismantling of roof brick tiles fixed in cement mortar in single layer.

Demolition mud phuska in roofs any thickness including plastering and leeping complete all as specified and directed.

M&L for 40mm thick brick tile laid over 15mm thick bedding layer in grouting CM(1:6) and grating and pointing with CM (1:3) with crude oil 5% wt of cement complete all as specified and directed.

All as per Srl item No 4 above but except tiles.

Roughing the surface of old concrete floor picking sweeping clean and washing down with water to remove dust/mud etc and brushing neat cement slurry @ 3kg/Sqm.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone agg) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 using 12.50mm graded stone aggregate as in roof padding averaging thickness of 50 mm complete all as specified.

M&L for 10 mm thick cement plaster in CM (1:4) using WPC on RCC roof slab including cleaning of existing surface complete all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.torch shield using gas burner including 100 mm side lap and lap 150mm over in roof treatment including bitumen primer complete all as specified and directed

Demolition of cement concrete above ground floor and in any position.

M&L plaster 15mm thick in cm 1:4 in sunken portion of slab with using waterproofing compound Note : Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound.

M&L for PCC 1:5:10 type F2 using 40 mm stone agg filling fdn and mass cove in sunken floor complete all as specified and directed.

M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and smooth without using extra cement and applying two coats of oil bound distemper over a coat of primer and not less than 1mm th putty on plastered surfaces including taking down complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and smooth without using extra cement and applying three coats of white wash on wall plastered surfaces including taking down complete all as specified and directed.

M&L 10mm thick cement plastering on ceiling in CM 1:3 and applying three coats of white wash plastered surfaces including taking down complete all as specified and directed.

M&L 15mm thick cement plastering on fair faces in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement but with using water proofing compound including taking down Complete all as spc upto height 12 mtr Note : WPC shall be measured and paid separately.

M&L for 15mm thick cement plastering on fair faces in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement includig taking down complete all as specified upto height 12 mtr.

M&L for complete removing of existing treatment and applying one coats of water emulsion paint (Apex) of wall over a coat of 1mm thick wall putty over one coat of primer on wall complete all as specified and directed.

M&L preparation of new plaster surface and applying two coats of cement base paint of wall all as specified upto height 12 mtr.

M&L for complete remove of existing treatment and applied one coats of cement based paint on wall upto height 12 mtr complete all as specified and directed.

M& L for one coat of white wash on old treated ceiling surfaces complete all as specified and directed.

M&L for complete removing of existing treatment and applying not less than 1mm thick putty and two coats of oil bound distemper ona coat of primer on wall complete all as specified and directed.

M & L for preparation of old decorated wall surfaces and applying one coat of white washcomplete all as specified and directed.

M&L for preparation of old painted wooden surface exc 10cm width or girth and applying one coat of synthetic enamel paint over one coat of primer complete all as specified and directed.

All as per Srl item No 27 above but on steel surface

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats and removing to store complete all as specified and directed.

All as per Srl item No 29 above but exc 1.50 Sqm but n.exc 4 Sqm

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each for resecuring or easing and refixing in the same opening complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 1.5 Sqm complete all as specified and directed.

S&F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hings, lock strike, plate etc complete of size 105x60mm all as spd including two coats of painting over a coat of primer and filling PCC 1:2:4 (type-B0) in the frames complete all as specified and directed.

All as per Srl item No 33 above but 125x60 mm.

S&F 30mm thick factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to e fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S&F 35 mm thick both side laminated factory made flush shutters, solid core construction, with block board core and decorative face panels as decided by Engr-in-charge, on both sides complete all as specified and directed

S&F glazed and skeleton shutters 35mm thick of 2nd class hard wood open rebated and prepared to receive gauge & glass etc with edge of sash bar and number edges of framing plain chamfered beads for securing glass etc size of number of shutters as spd SSR Part-I & section 8 clause 8.23 & (b) complete all as specified and directed.

S & F in repair 18/19 Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as specified and directed.

All as per Srl item No 39 above item but fix in repair

S&F Aluminium anodized barel tower bolt of extruded section 150mm long ISI marked complete all as specified and directed.

S&F aluminium alloyed handle fabricated type anodized of size 150 mm long complete all as specified and directed.

S&F stainless steel barrel tower bolts, stove enamelled black, with bright bolt 200mm long ISI marked complete all as specified and directed.

S&F stainless steel pressed handles, oval type, stove enamelled black size 150 mm long complete all as specified and directed.

S&F 75mm size hasp and staple safety type aluminium anodised brass with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F in repairs 300mm long stainless steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate sections complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern prings,including roller and roller plate complete all as specified and directed. Note : Repair required on steel door frame, welding to be carried out or necessary alternative arrangements to be done.

S&F including taking down steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm single rebated comprises glazed shutter including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 including following fitting welded to frame shutter:- (i) Hold fast,150mm long of 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-1020/06 (vii) M S guard bar 12mm square bars @120mm C/C fixed horizontlly.

S&F cast malleable or mild steel casement stays, size 250mm with hinged joint and two each plates with studs complete all as specified and directed.

S&F cast iron or malleable cast iron handles, cast type, stove enamelled black for steel window 100mm long complete all as specified and directed.

S&F sheet glass 3mm thick ordinary quality , fixed with oil putty complete all as specified and directed.

All as per Srl item No 51 above but pin headed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty and fixed with beads complete all as specified and directed.

S & F rotational moulded polytheylene triple layered white water storage tanks of capacity 500 Litres(cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and 20mm dia brass float valve with brass rod complete all as specified and directed.

All as per Srl item No 54 above but 1000 ltrs capacity.

S&F in repair 20 mm float ball brass valve high pressure with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (make Prayag/ polytuf) complete all as specified and directed.

Taking up and down GI steel tubing and connections 15mm bore including cleaning for refixing or removal to store complete all as specified and directed.

Taking up and down GI steel tubing and connections 20mm bore including cleaning for refixing or removal to store complete all as specified and directed.

Refixing old steel tubing and connections 15mm bore in new or old position (walls, ceiling, floor, etc) complete all as specified and directed.

Refixing old steel tubing and connections 20mm bore in new or old position (walls, ceiling, floor, etc) complete all as specified and directed.

S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked complete all as specified and directed.

S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked complete all as specified and directed.

S&F in repair bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F stop valves and angle valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and directed.

S&F in repair stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified and directed.

S&F 15 mm stop cock screwed to iron pipe CP concealed type with long shank and capstan head for (Bath shower) in repair complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy but fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repair CP shower rose 125 mm size with swivel joint fancy type complete all as specified and directed.

S&F CP brass towel rail `D’ type 60 Cm long fixed to wall complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 complete all as specified and directed. Note:- Flush pipe and flushing cistern to be measured and paid separately.

S&F in repair for Vitreous China wash down water closet pan ( pedestal pattern) white ( excluding flushing cistern and flush pipe) including plastic water closet seat white with jet, closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F CP brass Health faucet (hand shower) including flexible pipe of required length fixing to 15m dia pipe with brass check nut complete all as specifed and directed.

S&F in repairs plastic water closet seat black closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repair revitreous china bowl urinal flat back size of 465x 355 x265mm white with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing aroug urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe complete all as specified and directed.

S&F Vitreous china wash basin,white flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cp waste coupling complete all as specified and directed.

S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F in repair Grating doom 100 mm dia but with weast hole of PTMT (Minimum weight 25 gms) complete all as specified and directed.

Supply only PVC low level flushing cistern 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required.

S&F in repair 100mm bore PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required.

All as per Srl item No 82 above but 75mm bore.

S&F 75mm bore PVC (SWR) bends any redius fixed with pipes complete all as specifed and directed

S&F 110mm bore PVC (SWR) bends any redius fixed with pipes complete all as specifed and directed

S&F cast iron soil pipes 100mm bore, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or on wall complete all as specified and directed.

All as per Srl item No 86 above but 75 mm bore.

S&F 100mm CI bends with oval access door complete all as specified and directed.

All as per Srl item No 88 above but 75mm radius with access door.

S & F 100 bore CI Branch pieces (Single T), single (equal or unequal ), ordinary or inverted ) (spigot or socket type ) or with parallel branches with oval access door complete all as specified and directed.

S&F CI vent cowl of size 100mm complete all as specified and directed.

S&F CI vent cowl of size 75mm complete all as specified and directed.

M&L for CI floor trap with grating incl joint 100mm dia complete all as specified and directed.

M&L for CI floor trap with grating incl joint 75mm dia complete all as specified and directed.

S & F Stack clamps (100 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

All as per Srl item No 95 above but 75 mm.

M&L for preparation of new painted wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed.

All as per Srl item No 97 above but on steel surface.

Supply and fixing in repair cutrain rod 20mm dia of anodised aluminium alloys with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug including taking down existing curtain rod complete all as specified and directed.

Demolation of brick work built in cement mortar cement lime mortar.

M&L for brick work with sub class 'B' brick straight curved on plan exv 6m mean radius built in CM 1:4 brick m slightly roundeda as wedged shaped as spd.ther part made of mild steel heavy duty in fixed complete all as specified and directed.

M&L brick with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc.

M & L for Marble work 16-18 mm thk (table rubbed and polished) in steps, jambs, pillars window cills , cooking platforms , stair case and like in cement mortar ( 1:4) incl pointing in white cement ( 1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed and approved by Engg-in-charge

S&F machine cut Kota stone slab flooring 20-25mm thick over cement screed bedding 20 mm thick in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing (with bees wax polish) complete all as specified and directed.

All as per Srl item No 105 above but Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement plaster.

Moorum/ red bajri filling in floors or pavings, laid in layers n. exc 15cm thick, spread, levelled and rammed including watering.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) sub base complete all as specified and directed.

M&L for pre-cast cement concrete louvers and jali 1:2:4 type B-0 (using 12.5 mm graded aggregate) in jallie 25mm thick set in CM 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20mm graded stone aggregate) as in copings complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n.exc 15cm above ground level.

M&L for cement cocnrete type C-1 (1:3:6) (20mm graded aggregate) as in plinth protection as thickiness of 50mm without using extra cement complete all as specified.

M&L for 40mm thick plain cement concrete 1:2:4 type B-0( using 12.50 mm graded stone aggregate), as in flooring finished even and smooth without using extra cement complete all as specified.

M&L incl dismantling for ceramic glazed coloured tiles of size 350x250x7mm/ 450x350x7mm/300x200x7mm thick joint free on and incl 10mm thick screed bede in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting/ dado complete all as specified.

M& L incl dismantling non skid dark/ coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified.

S&F in repairs Mortice lock , vertical type size 100mm 4 levers Mild steel complete all as specified.

S&F in repairs door closer hydraulicaly regulated ,univarsal type, aluminium(Die cast) body complete all as specified.

S&F in repair sheet glass, 5.5mm thick ordinary quality, in squares, exceeding 0.50 sqm in each pane including oil putty complete all as specified and directed

Petty repair to existing in built Aluminium Door , locks, hinges incl necessary making the lock/Glass/ adjusting shutter complete serviceable all as per existing pattern as directed by Engineer-in-Charge incl provision of duplicate keys as required.

Material and Labour for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1 : 2 : 4) using 12.5mm graded crushed stone aggregate and reinforced with 10mm TMT bars with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of Finishes to match with the existing surfaces in at any height complete all as specified. Note: - Cost of formwork and welded mesh, bldg ht upto 12 mtr, shall be deemed to be included in unit rate quoted by the Contractor.

AVTAR SINGH RAJU

Harbhajan electric co

multani construction co

KAILASH CONSTRUCTION CO

M/s SODHI SALES CORPORATION

RATTAN CHAND CHANDAN AND CO

M/s kulwant singh and sons

buta singh and sons