REPAIR TO MISC FURNITURE AT JAIPUR MIL STN

Amount

Replacement description of tops (1.01 to 1.09): Taking out unserviceable top from Table and S&F new top made out of 18mm thick MDF board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Fixing the same with the help of necessary screw/ nut bolts all as specified in drg and directed by engineer in charge.

Seat of Chair for junior level. Drag No FD-170M

Back of Chair for junior level. Drag No FD-170M

Seat of Chair for middle level. Drag No FD-169M

Back of Chair for middle level. Drag No FD-169M

Beat of Chair for senior level. Drag No FD-169M

Back of Chair for senior level. Drag No FD-169M

Top of desk for junior level. Drag No FD-168M

Top of desk for middle level. Drag No FD-167M

Top of desk for senior level. Drag No FD-166M

Painting Description (for item No 2.01 to 2.09) : M&L preparation old painted steel surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer then applying two coat of synthetic enamel paint olive green/black/ white/grey (as directed) with spray gun or by manual brush and roller as per requirement in appropriate shade complete including S&F hard rubber shoe where ever required all as specified and directed by engineer in charge.

Chair for junior level. Drag No FD-170M

Chair for middle level. Drag No FD-169M

Chair for senior level. Drag No FD-169M

Desk for junior level. Drag No FD-168M

Desk for middle level. Drag No FD-167M

Desk for senior level. Drag No FD-166M

Chair invalid wheeling non folding. Drag No HFD-2011

Patient trolley. Drag No HFD-2017

Couch examination steel FD-122

M&L welding throughout in broken joints of frame and other steel section of chair and desk for junior, middle and senior level etc. Welding at one broken point will be counted as one point. Drag No FD-165,255, 1007,1009 & 166M to 170M

S&F hard PVC Shoe/ring shall be screwed to legs of chair and desk all type and as per drawings. Drag No FD-165,255, 1007,1009 & 166M to 170M

Auditorium Chair ( Description for item 5.01 to 5.04) Model No. 27511 Make-Godrej :- Removing of old unserviceable Leatherette Rexin cloth/tapestry cloth from seat and back of Auditorium Chair and S&F new tapestry cloth duly upholstered/stiched with foam and mesh polyyster fabric (Inner lining cloth) as shown on drawing and directed by GE/Engineer in charge. Note : (i) The rate of tapestry shall be not less than Rs. 350 per meter. (ii) The rate of Leatherette Rexin cloth shall be not less than Rs. 370 per meter.

Replacement of Tapestry cloth from seat and back of Chair. Drag No

Replacement of Leatherette Rexin cloth from handle of Chair. Drag No

Replacement of Tapestry from side of Auditorium Chair. Drag No

S&F Tapestry cloth cover duly stiched for neck rest of chair. Size and colour as approved by engineer in charge. Drag No

Auditorium Chair Model No. 27511 Make-Godrej (6.01 to 6.02) :- Removing of old unserviceable arm rest from Auditorium Chair and S&F new arm rest as shown on drawing.

S&F 25 mm square MS pipe duly painted black and welded to arm rest for supporting. Welding to be done with excellent workman ship and as directed. Note :- Due care shall be taken while welding work to avoid any welding burnt spots and spills on upholstry. contractor shall liable to replace the entire upholstry and burnt part of chair damaged during welding and painting.

Minor repairing of chair auditorium and S&F necessary parts i.e. Springs, bolts, nuts, screws, fastners, bushes etc to make it completly serviceable.

Auditorium Chair Seatrest Assembly (Model No. 27511 Make-Godrej) :- S&F as in repair seat-rest assembly shall be made up to 15mm thick marine plywood shall be upholstered with foam mesh polyyster fabric and moulded palyurethane foam with interior moulded seat cover, the seat shall be auto tip up type and shall fold when not in use seat size shall be 45.0 cm (w) x 48.5cm (D) x 14.5 cm (T) approx. Note :- The work shall be carried out all as per existing provision and shall be fixed at their original location.

Auditorium Chair Back rest assembly (Model No. 27511 Make-Godrej) : S&F as in repair back rest assembly shall be made up of 12mm thick marine plywood shall be uphostered with foam mesh polyster fabric and moulded polyurethane foam with interior moulded back cover, the back foam shall be designed with contoured lambal support for extra comfort the back size shall be 47.5 cm (W) x 80.0 cm (H) x 12.5 (T) approx. Note :-Plyurethane foam : The plyurethane foam (palort +isocyanate) shall be maulded with density = 48+2 kgs/m3 and hardness=20+2 on hampden machine at 25% compression. Note :- The work shall be carried out all as per existing provision and shall be fixed at their original location.

Leg frame assembly & fixing of Auditorium Chairs (Model No. 27511 Make-Godrej) : S&F as in repair frame assembly shall be fabricated from MS flat 40mm x 6mm thick and length 1' ft comforming to IS-15:738 welded with grasing member having foot prit area 286.7mmx767mm made from 6mm flat to framed component having two holes in each foot and fixed by using 10mm long ms expansing ball including necessary drilling growth with epoxy nartal ate complete is shall be black powder coated and gratted to the floor all as directed and approved by GE. Note :- The work shall be carried out all as per existing provision and shall be fixed at their original location.

Hot Food Trolley (10.01 to 10.04) (HFD-2066):- Removing of unserviceable part of furniture and S&F new part made out of mild steel/SS sheet of 18/16 gauge (as per requirement of drawing) of CRCA quality duly shaped as per drawing and assembling and fixing with other member by screw and point welding as required and directed, including painting of replaced part of steel portion to match with existing.

S&F new castor wheel of size 200mm dia as shown in drg.

S&F new castor wheel of size 200mm dia with brake as per drg.

Welding of Handle, drawers and other broken section of steel portion. One broken point to be welding will be counted as one unit

Removing of unserviceable heating system with switch and regulator from hot food trolley and S&F new one set of heating system shown as per drg and directed.

Chair invalid wheeling non folding (11.01 to 11.06) (HFD-2011) :- Removing of unserviceable part of furniture and S&F new part made out of mild steel/SS sheet of 18/16 gauge (as per requirement of drawing) of CRCA quality duly shaped as per drawing and assembling and fixing with other member by screw and point welding as required and directed, including painting of replaced part of steel portion to match with existing chair

Removing of unserviceable seat and S&F seat of size 450mm and back upholstered with polypropyene fabric of approved colour and moulded with polyurethane foam as directed and as shown in drawing.

S&F castores of 200mm swivel type as directed.

S&F puncture proof rubber type of 650 mm dia as directed.

S&F wheels (Rim) fitted with self propelling loops and break arrangementes as directed.

S&F arm rest as shown on drawing.

S&F Aluminium adjustable foot rest as shown on drawing.

Patient trolley (HFD-2017) :- Removing of unserviceable castores and S&F castores of 200mm swivel type duly shaped as per drawing and assembling and fixing with other member by screw/nut bolts and point welding as required and directed, including painting of replaced part of steel portion to match with existing Patient trolley. Drag No

All as per item No 12.00 but Trolly Four wheel for loading. Drag No FD-160(M)

Repair to cushioned chairs (14.01 to 14.08) :- Removing of old unserviceable tapestry cloth including foam from seat and back of Chair and S&F new polyurethene foam of 50-55kg/m cube density duly upholstered with tapestry cloth of superior quality and smoothening polishing and painting on wooden and steel portion of the item to match with existing colour as approved by Engineer in charge and fixed as shown on drawing.

All as per item no 14.00 but seat of Chair dining officer's. Drag No HFD-2030

All as per item no 14.00 but back of Chair dining officer's. Drag No HFD-2030

All as per item no 14.00 but seat of Chair dining steel JCOs/OR. Drag No HFD-2030

All as per item no 14.00 but back of Chair dining steel JCOs/OR. Drag No HFD-2030

All as per item No.14.00 but seat and handle of Chair Easy. Drag No HFD-2034

All as per item No 14.00 but back of Chair Easy. Drag No HFD-2034

All as per item 14.00 but seat of Chair visitor geeken. TP

All as per item 14.00 but back of Chair visitor geeken. TP

Repair to Couch Examination (15.01 to 15.02) Drag No FD - 122 :-

Replacement of foam sheet 1800 x 900 mm 40 density alongwith cotton layer, hession and cotton cloth duly upholstered with leatherite of best quality and approved shade by engineer-in-charge. Total height of the cushion sheet alongwith springs,foam, cotton layer and cloth hessian must be 150 mm and all as specified in drg.

Replacement of Copper plated steel springs of 100 mm dia and 10 gauge wire existing sizes.

S&F new hard rubber shoe

S&F of PVC seat for chair varandah (MAP) size as per drg of 4mm thick weight not less than 1.85 Kg. Make - AMKO/COMFO and best quality approved by GE and as directed. Drg No FD/MAP/12

S&F of PVC back for chair varandah (MAP) size as per drg of 4mm thick weight not less than 1.85 Kg . Make - AMKO/COMFO and best quality approved by GE and as directed. Drg No FD/MAP/12

S&F seat for chair dinning size as per drg of 3mm thick weight not less than 0.39 kg Make - AMKO/COMFO best quality approved by GE and as directed. Drg No FD/MAP-II/05

Repair description for Chair dining PVC (19.01 to 19.04):- Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drag No FD/MAP-II/05

Rear legs

Front legs

Front Side/ rear /back rail

Side/ Center stiffener

M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing of Chair dinning.

Schedule of Credit

S S Infrazone

AJAY TRADERS

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD