Certain BR Repair and periodical services to OTM Accn in depot area of 223 ABOD Suranussi under AGE I Suranussi

Amount

Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed

Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed

Taking down shutters of any description exc 1sqm each and not exc 2.00 sqm each complete all as specified and as directed

Taking down shutters of any description size exc 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed

M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified

M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified.

M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed

Dismantling wall and Ceiling boards any thickness, including cover fillets complete all as specified and as directed.

M&L for 12mm thick perforated particle board/tiles for insulation and accoustic purpose 60X60CM in size fixed in frame work /grid complete all as specified and as directed

M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed by Engineer-in-Charge.

Dismantling of asbestos cement corrugated or semicorrugated /fibre sheets in roof covering complete all as specified and directed by Engr-in-charge complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by engineer-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by engineer-in-charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and as directed

M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed

S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed

S&F 35 mm thick flush shutter solid core construction with block board core and decorative face panels veneer with lipping/frame to match on both faces complete all as specified and as directed

S&F 300mm size mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified

S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified

S&F 125 mm size mild steel pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.

S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge.

S&F Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.

S&F in repair galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.

S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. Make: Hindware / Cera / Parryware. complete all as specified and as directed.

S&F in repairs vitreous china water closet Padestal pattern( white ) includng P or S trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed.

S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china urinal Half stall type, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S& F in repair vitrious china wash hand basin flat back 550X400mm incl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap etc all as specified and directed by engineer-in-charge.

Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge.

S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1.

Dismantling water tanks of any description exc 500 and n.exc 1000 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge.

S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1.

Taking down GI tubing and connections with all fittings 15 mm bore complete all as specified and as directed by engineer-in-charge.

S&F 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

ditto all as per item No 70 above but fixing only

S&F in repair pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.

S&F in repair 15 mm bore dia bib tap (long or short body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.

S&F in repair 15 mm bore stop valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.

S&F in repair 15 mm bore stop valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe etc complete all as specified and as directed by engineer-in-charge.

S &F in repairs PVC waste pipe of standard pattern not less than 75cm long 32 mm/40mm dia for WHB/steel sink waste coupling or suitable size complet all as directed.

M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified

M&L preparing surfaces new of walls and applying two caots of cement base paint over a coat of primer complete all as specified incl preparation of surfaces.

M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surface complete all as specified.

M & L perparation of old decorated plastered surfaces of wall and cornics by complete removal of existing treatment by applying water and scrapping of entire thickness of existing treatment with using steel scraper and thereafter applying applying two coat of oil bound distemper over and including wall care putty to achieve smooth finish complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on steel surfaces in simple complete all as directed

M&L for preparation of old painted wooden surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete.

M&L for preparation of old decorated brick/concrete plastered or unplastered/un-plastered surfaces of walls incl pillars, cornices etc booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, graeacy spots etc and applying one coat of white (lime) wash complete all as specified. (ht may vary upto 10.00mtr )

All as per item No 55 above but applying one coat of lime white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated brick/concrete plastered or unplastered/un-plastered surfaces of walls/roof incl pillars, cornices etc booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, graeacy spots etc and applying one coat of cement base paint (simple/camouglage pattern) complete all as specified and directed (Note- CBP to be done by Sprayer/Mechanically)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using spray gun.

M& L for repair to chajja, facias,balconeis, roof/parapet projections with 15mm thick in cement plaster mortar 1:3 at any height of building including necessary arrangment like scaffolding and safty precautions etc complete all as specified and directed. (Note : Contractor shall be responsible for any accident, mishap, damage to life and material and insurance of workmen etc

M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces.

M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer incl preparation of surfaces.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone agg as in mass filling and sub base.

S&F in repair PVC SWR pipe 110 mm dia fixed to walls, single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F in repair PVC SWR pipe 110 mm dia laid in trenches , single socketed in any length with rubber ring joints fixed to walls etc all as specified

S&F in repairs 100 mm dia stack clamp made out of 25x4mm Flat iron etc all as specified

M&L for Complete repair of steel rolling shutters including servicing, overhauling of rolling shutter gear operated type or hand operated type with chain wheel and hand chain of any size by oiling , greasing to gear box , repair/replacement to guide channel, shaft, pully, gear box, hood cover, pully, bearings etc and replacement of parts like spring, pins, lathe etc and including securing guide channel to walls with PCC 1:2:4 type B1 and making good the surfaces with CM (1:4), including welding of any thickness and making the rolling shutter functional to the entire satisfaction of the Engineer in charge complete all as specified and directed by Engineer-in Charge. (size of each shutter is 10 to 25 sqm)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engineer-in-Charge.

M& L for 1.00 mm lath thickness Steel rolling shutters, with out ball bearing, as specified including top cover, an?choring rod, hasp and staple and one shop coat of primer; erected in position as indi?cated, complete: push pull or manual tye complete all as specified and directed by Engineer-in Charge.

M& L for 1.00 mm lath thickness Steel rolling shutters, with out ball bearing, as specified including top cover, an?choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box & crank handle complete all as specified and directed by Engineer-in Charge.

S&F in repair 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane

Ditto all as per Item 70 above but 3mm th pin head/ figuered glass

S&F in repair 6.40mm th rough cast wired figured glass with screws in n.exc 0.5 sqm in each pane complete all as specified & directed by engr-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site.

M&L for Colured vitrified Ceramic tiles double charge 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc all as specified over 15 mm th screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engineer-in Charge.

M&L for coloured vitrified double charge 10mm thick (sqare/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor etc ,set and jointed in neat cement slurry and pointed in white or coloured cementto match etc all as specified over 15 mm th screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engineer-in Charge.

M&L for Glazed ceramic tiles in vertical surface,skirting 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L PCC 25mm th 1:2:4 type B1 using 20 mm graded stone agg as in levelling course.

M&L Machine pressed precast concrete interlocking paver block vibrator finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with gery cement and pigment , complete all as specified and directed by Engineer-in Charge.

Sand filling under floors or in foundations including watering and consolidation

M&L 18-20 mm th machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.

S&F anodised aluminium frame powder coated with minimum thickness of powder coating 50 micron for doors, windows, ventilators with one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. complete all as specified and directed. Note:- Prelaminated partical board and sheet glass/wiremesh shall be measured and paid for separately. Make:- INDAL/HINDALCO/JINDAL or equivalent as per IS.

S&F anodised aluminium door shutters, powder coated aluminium section weighing 0.55 Kg/m ncluding necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 2 Nos tower bolt of size 200 mm, hinges, anodised aluminum snap beading screws etc with chowkhat complete all as specified.

S & F for Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,hook and eye closure,Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F anodised aluminium window and ventilator shutters, powder coated fixed type without sash bar,aluminium section weighing 0.55 Kg/m ncluding necessary joining cleats,glazing clips, ruber rubber packing,handles 2 Nos per shutter,2 Nos tower bolts of 150 mm size per shuttter anodisd aluminium snap beading, screws etc with chowkhat complete all as specified.

S&F 9 mm th Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed by engineer-in-charge.

DUGGAL CONSTRUCTION CO (BID ID -3103363)

SUNRISE CONSTRUCTION COMPANY (BID ID -3105957)