Restoration of 02 no link roads falling under Mc Mamdot damage due to laying of sewearage 1 Phirni track pind Mamdot road code F 11082 2 Mamdot to Dona Rehmat wala road code F 11049

Compaction of earth work & Prepration of sub grade including Loosing levelling of eaeth 225 mm thick top layer , rough dressing of soil final dressing of earth to give level , camber, watering , rolling with road roller, compacting the bed to achieve minimum dry density as given in the table 300-2 as per techincial clause 305 of MORT&H Specifications ( In case of link roads earth work to be done by Villgers)

Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications

Providing,Laying, Spreading and compacting stone aggregates of grading -I to water bound macadam specificaton in cluding spreading in uniform thickness, hand pacing , rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requiste type of binding materials to fill up the interstitices of coarse aggregate, waterin gand compacting to the required denisty complete as per technical specificatons ( without screening for low volume roads /undesigned)

Providing,Laying, Spreading and compacting stone aggregates of grading -II to water bound macadam specificaton in cluding spreading in uniform thickness, hand pacing , rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requiste type of binding materials to fill up the interstitices of coarse aggregate, waterin gand compacting to the required denisty complete as per technical specificatons ( without screening for low volume roads /undesigned)

Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications

Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications

Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications

Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications

Kassi work undressed involving and average horizontal throw up to 2.0 Meters and an average vertical lift up to 0.50 Meters including breaking of clods.

Videography of all the roads included in DNIT to be done before the start of any work. Videography to be undertaken in the presence of an officer not below the rank of SDE / JE. Two video copies of each road to be submitted by contractor. It must cover all reaches and aspects of the road.