SITC of managed switches and AMC of local area networking at UMC office. (e07_Light_05)

Amount

Annual Service Contract (Firewall,Networking System, Server Racks, Network Racks, Layer 2 Switches, Local Area Networks.)

SITC of 24 Port L2 Managed Swich which should be with switching capacity (data rate, full duplex) 56GbPs, 24 port*10/100/1000 Mbps RJ45, 10/100/1000 Mbps RJ45 uplinks (full duplex only,no PoE) * 4 Port, 1 Gbps SFP/SFP+ uplinks * 1.5 MB,Quality of Service (QoS) · ACL Mapping and Marking of ToS/DSCP (CoS)· ACL Mapping and Marking of 802.1p· ACL Mapping to Priority Queue· Classifying and Limiting Flows Based on TCP Flags· DiffServ Support· Honoring DSCP and 802.1p (CoS)· MAC Address Mapping to Priority Queue· Priority Queue Management using Weighted Round Robin(WRR), Strict Priority (SP), and a combination of WRR and SP. Make :- Peplink/Ruckus/Juniper/ZyXel

SITC of Outdoor Rack Usage/Application Outdoor - CCTVSurveillance,Wifi, Smart City Type OUTDOOR Material Galvanized Steel ShapeRectangular IP Rating IP55 Color RAL 7035 Size 6U 600x400

SITC Of CAT6 UTP 24 AWG Patch Cord - 3 mtr with cross separator Factory crimped multistranded copper patch cord with tensile strength of > 50N. Conforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 with tensile strength >50N, number of insertion is 750 (Data, Workstation End). Make : Legrand/Panduit - Pannet/Siemon/Belden

Supply and Installation of unsheilded/360 degree sheilded Information outlets made of high impact plastic body with ABS FR Grade halogen free material with provision for protection against dust in jack suitable for Cat 6/6A application complying to latest ammendments According. to Cat. 6/6A channel It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair 23/24 AWG solid/stranded wire diameters using 100 Ohm unshielded/shielded balance twisted pair cable the jack should have tooless/impact termination on reliable copper tin plated Insulation displacement contact with easy lock mechanism It supports IEC 60603-7-4 and complied with ANSI/TIA/EIA 568 C.2 standard. jack should be RJ11RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATMDigital video and broadband/baseband analog video Voice over internet protocal (VOIP) Specifications in existing modular/MS Boxes along with necessory connections as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work refer Annexure A attached with this BSR . Make : Legrand/Panduit - Pannet/Siemon/Belden

Supply Installation Testing and Comissioning of Rack mounted 19 1U Cat6 24 Port loaded 1.5-1.6 MM CRS chasis powder coated sheet steel made of plastic (ABS) Modular Patch Panels with Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work refer Annexure A attached with this BSR .Modular Patch Panel Loaded with Cat -6 I/O. Make : Legrand/Panduit - Pannet/Siemon/Belden

SITC of Cat 6 cable with Supply & Laying of Conduit with Accessories.Make : Legrand, Avaya, AMP, Evernet

AII TECH SYSTEMS PVT. LTD