Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Rejected-Technical | Rejected-Technical Documnet not submitted as per tender terms and condition, hence disqulified. |
Tender Value
₹5.0 L
EMD Value
₹10,059
Closing Date
6 Aug 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Exe.,Engg., PWD, WD-I, Daman.
The Multi Office Complex, PWD, 2nd Floor, Near Moti Daman Market, Moti Daman.
Regarding re wiring work and provide Air Conditioners at D-type Bunglow near Judge residence Fort Area, Moti Daman. (2nd Call) (E-47316)
2022_DAMAN_2346_1
Tender Notice No.53/05/2022-23
Open Tender
Electrical Works
Works
30 days
Daman District.
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
The Exe.,Engg., PWD, WD-I, Daman.
₹10,059
10 Oct 2022
29 Jul 2022
6 Aug 2022
29 Jul 2022
6 Aug 2022
29 Jul 2022
Amount
electrical work
Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in / on surface on wall / ceiling complete with 6 A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as directed. in existing pipe. (Cat-III)
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm. (green) both are of ISI marked 1.1 KV Grade FR PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC /Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary ceiling rose / H.D. Connector as directed in existing pipe. (Cat-III)
Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer Incharge.One No. SP 6 Amp. (Cat-III)
One No. 5 pin plug. (Cat-III)
Blank plate single. (Cat. III)
16 Amp. SP one way switch. (Cat. III)
6/16 Amp. Universal socket. (Cat. III)
6A/10A/16A/20A/25A/32A Double Pole Modular MCB Switch. (Cat. III)
Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall/celling of following size.25 mm.
Mains with 1.1 KV grade FRPVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in / flushed on wall/ ceiling, with 1.5 sq.mm. copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size.(e) in existing pipe.2 wire 2.5 sq. mm.
Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lungs, nuts and bolts if required. One wire 16.00 sq. mm One wire 16.00 sq. mm
Approved make Three pole moulded case circuit breaker having breaking capacity / strength ICU of 35K.A. at 415V. having normal current rating up to 125A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50c/s. with all internal connections & complete erected in existing 16G.M.S. housing.ICS = 100% of ICU only Cat. III.
Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports / insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections.Suitable for 100 Amp. capacity
Supplying & erecting 20 Amp. 10KA. ‘C Curve’ single pole MCB with 20 Amp. plug socket, company fabricated powder coated sheet enclosure erected as directed with connection A] Metal Clad Socket with Metal clad top Cat. III
Miniature circuit breaker single pole 6A to 32A. suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark. (Cat. III)
Providing and erecting Three pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box. for 40 Amp. (Cat. III)
Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). Three phase 4 way SS Double door for single phase outgoing horizontal box
Providing and erecting required size HOT deep Galvanised strip for earthing of H.T. OCB / ACB / Transformer LT panel board, Motors etc. using Proper clamp.
Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G.
Providing and erecting HOT deep Galvanised strip iron wire 8 to 16 S.W.G.
Supplying & erecting earth pit of minimum bore dia. 150mm size, approved make Safe Earthing Electrode consisting Pipe-in-pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipe having Outer pipe dia of 50mm having 80-200 Micron galvanizing, Inner pipe dia of 25mm having 200-250 Micron galvanizing, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. For electrical installation up to 440 V in normal soil Length of pip: 1 Mtr. Back filling compound – 1 Nos. Bag of 15 Kg.
Supplying & erecting funnel type earthing having earth plate of following size buried in specifically prepared earth pit 3mtr. Below ground with 40Kg. charcoal and salt with alternate layers of charcoal and salt, 20mm dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double G.I /copper earth wire No 6 SWG bolted with lug to the plate and covered in 12mm dia. G.I. pipe 2.5mtr. Long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to ISS (As per drawing) with following specification.With 30 x 30 x 0.35 cms. C.I. earth plate.
Supplying and erecting nuwood 12mm thick on existing angle iron frame or wooden patti.
Supplying & erecting XLPE (IS: 7098) (I)-88 ISI marked unarmoured Aluminium cable 1.1 KV grade to be erected as directed of following size. (b) 2 core 4 Sq. mm
Supplying & erecting XLPE (IS: 7098) (I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. (E) 3 core 2.5 Sq.mm.
Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.4 core 16 Sq. mm.
Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistoried copper conductor for 1.1 KV to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(A-1) 4 core 4 Sq. mm.
Marking trench in soft soil of suitable width of 90 cms. Deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground.
Marking trench in Hard murrum / Tar Road of suitable width of 90 cms. or required depth for laying and size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.
Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene (conforming to IS 14930 II) with necessary connecting accessories of same material at required depth for laying of cable. Below ground / road surface for enclosing cable and backfilling the same to make ground as per original. 50 mm. dia.
Supplying following size of Light duty “A” Class G.I. Pipe & erecting as directed by Engineer – in – charge.(B) 50 mm. dia.
Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.2 to 4 core 4 Sq. mm.
Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.3 ½ / 4 core 25 Sq. mm.
Solderless crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.25 Sq. mm.
Solderless crimping type Copper lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass / cadmium plated nut bolts in an approved manner.1.5/2.5 to 6 Sq.mm.
Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing [ Make shall be approved by Engineer in charge]
Providing & erected fresh air fan 250 mm dia with square frame make of ABS body with louvers.
Providing window frame suitable for erection of exhaust fan complete covering the remaining portion of window with 15mm. thick plywood and colour washing to match the colour washing to match the colour of the wall.
Providing cement concrete for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with necessary curing for pole muffling or any other purpose. (22 x 0.3 x 0.3 x 0.9 = 1.782 cu.mt.)
Supplying & erecting approved make SMC press moulded composite FRP. (Plastic) loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip 4 way & hinged doors having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps & earth bolt of following size of box. 150mm x 125mm x 100mm. (deep)
Providing street light pole bracket consisting of “B” class M.S. pipe of 4.2 cms. outside dia. complete with suitable MS sleeve tubing of required size and length suitable for 76.5mm. / 80 mm or require size of pole top having nuts and bolts for fixing the brackets and having spread of 0.5.mtr. length with 110 deg. With vertical plane and suitable welded stiffener, reducer and nipple with checknuts complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint with following nos of arms.[A] Single Arm bracket 0.5 Mtr.
Supplying & erecting approved make time switch with single pole air break contacts suitable for 230 V.15/16A. complete with self starting motor driven clock ‘ON’&’OFF’ automatic arrangement at any predetermine time during each 24 hours, With nickel cadmium rechargeable battery backup erected as directed.
Supplying & erecting power contactor for time switch complete erected as per direction Cat. III.4 Pole 440V 40 Amp.
Supplying & erecting horizontal / vertical mounting type storage water heater with copper container housed in M.S. / S.S. body insulated with glass wool / puf complete with heating element, adjustable thermostats 300 c to 850 c, indicating lamp, safety valve, fusible plug etc. complete erected with coach bolts, nuts. Washers & cementation. (A) 10 ltr. With 3 K.W. heating element Cat. II
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates).Make: Pansonic, Surya, Havells, Wipro, EG.A) Tube Light with integral/ non-integral driver. (d) 20-22 Watt, Surge – 4KV, IP-20, 4 feet (Cat-III)
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIASEOUL /Bridgelux (U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates).LED Lamps integral type, cool white with PC diffuser suitable for B22 LAMP holder: 5 to 8 watts.
Supplying and erecting LED street light/ Flood light fitting with high power white LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more the 130 Im/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coasted and Polycarbonate optics/ lenses with company mark/ name engraved or embossed 120 to 300V, Power Factor more than 0.95, THD < 10% CCT 5000 K to 5700k, Uniformity ratio > 0.45, luminaire efficacy>85 Lumens/ watt. LED driver efficiency > 85%. CREE/ OSRAM/ PHILIPS Lumileds / NICHIA/ SEOUL/ Bridge Lux (U.S.A.) make LED used for luminaire.(Each fittings required LM-79 & LM-8- certificates)(A) Street Light (IP-65), Surge -4KV (C) Above 24 watts to 36 Watts (Cat-III)
(D) Post Top Lantern LED fitting comprises of Copper dust finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting, open construction driver and accessories wired upto terminal block.(a) 40W (Cat-II) (F) Bollard LED fittings mounted on 60 cms high rotomoulded LLDPE pillar duly grouted on a concrete base by means of four nos of M8 x 75mm studs with necessary base ring.
(a) 8W, 680 Lumens, surge-2KV.(Cat-III)
Luminous or as approved by the Engineer-in-charge 950 VA inverter with 24 Months Warranty and 150 AH battery with 21 Months warranty including transportation charges.
Electrification work.
Supplying of Standard make Air Conditioner 1.5 Ton 3 star without inverter AC Anti- Viral dust filter pm-2.5 air filter- colls even at 52*C- Rapid cooling- 18*C in 45 second – Wifi ready golden Eva coil- hidden LED display- blow function Warranty as per company terms and installation charges included.
Supply & erecting of M.S. Stand Powder Coated for fixing outdoor unit of Split Air Conditioners.
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .