Supplying and fixing of different electrical accessories at various areas under subdivision Lodhi Road, New Delhi.

Amount

Supplying and fixing of the following items including dismantling the old electrical accessories (where ever required), making suitable necessary modification/arrangement (i/c petty items) for fixing the new items and making connections etc complete as reqd as per the site location given by the Engineer-in-Charge. a) 250 mm ventillation fan non metallic range. (Make: Orient Electric/ Havells/ Almonard)

b) 300 mm (12") heavy duty exhaust fan metallic range. (Make: Orient Electric/ Havells/ Almonard)

c) 400 mm sweep wall fan. (Make: Orient Electric/ Havells/ Almonard)

Providing and fixing of following rating and breaking capacity TPMCCB along with spreader terminals including drilling holes in cubical panel, making connections and suitable modification if required for fixing the MCCB etc complete as required as per site location. a) 250 Amp rating,35/36 KA breaking capacity TPMCCB. (Make: GE Model: LM250R/ L&T Model: DN2-250 D).

b) 100 Amp rating,16/18 KA breaking capacity TPMCCB. (Make: L&T Model: DU100D).

Supplying and laying of 2 x 25 Sq. mm XLPE insulated and PVC sheathed armoured aluminium conductor power cable of 1.1 KV grade on the existing wall surface/masonry open duct/RCC/Hume/Metal pipe/ trench/direct in ground including excavation,sand cushioning,protective covering and refilling the trench wherever required including saddling/clamping making connections and testing etc complete as reqd as per site location. (Make:Havells/Polycab/KEI/Finolex)

Supplying and making end termination with brass compression gland and aluminium lugs for 2 x 25 Sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and fixing metal box of 100 mm X 100 mm X 60 mm deep size (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including 1 no. 3 way bakelite connector strip double row barrier black terminal fixed inside the metal box for 3 number cables(1 incoming and 2 outgoing) and painting the box etc complete as required.

Supplying and fixing of following wattage LED tube with polycarbonate body including making necessary required electrical wiring modification in the existing T5/T8 FTL / conventional lighting fixtures so as to glow the above LED tubes etc complete as required as per site location. a) 20 Watt LED T8 tube, CCT (K) : 6000-6500; Lumens (lm)= Not less than 2100. (Make: Philips/Havells/Wipro)

b) 18 Watt LED T5 tube (complete with electronic driver) , CCT (K) : 6000-6500; Lumens (lm)= 1800. (Make: Philips/Havells/Wipro)

c) 18 Watt LED PL-L suited for installation in existing 2G11 lamp holders.

Supplying of 9-10 watt LED bulkhead luminaire complete with IP65/66 protection suitable for surface and wall mounting applications including installing in existing lift shafts with minor adjustment connections,testing and commissioning etc complete as required as per site location. (Make: Philips Model: Endura LED WT202W LED6S CW PSU S2 PC / Havells Model: HEXA FT10WLED857SSYMBOPC/ Wipro Model: LW07-141-XXX-57-G1)

KASHYAP ELECTRICALS

M/s Satyam Enterprises