Necessary works for extension of ICU and Oxygen beds at Thane Covid Hospital, Saket

Amount

Providing the MS Structure support and and fixing Non Asbestos Fibre reinforced aerated cement sandwich modules of 75mm thick, 600mm wide and 2400/2700/3000mm height made out of light weight fibre reinforced aerated cement/concrete core composed of portland cement, flyash, binders etc., with 5mm thick non-asbestos Fibre Cement Boards confirming Type-B,Catagory-III of IS 14862-2000 & ISO:8336:1993(E) on either side of the core. Panels having a tongue and groove on longitudinal side of the sandwich modules for joint of walls and partitions with apparent density minimum 700 Kg/cum, Thermal Conductivity (K-value) 0.12W/mK, maximum Axial Compresive Strength 42 Kg/Sqm. as per test method of ISO2380, P8:77 and having Fire Rating of 138min (Tested as per BS 476 Part 20-22). Sound Transmission Class of panels must be 40dB (Tested as per IS 9901 Part-3; 1981). These Panel modules are erected/ installed using galvanised iron steel tracks of 1mm thick, minimum 150GSM coated and of size 25mm x 76mm x 25mm as bottom track, 25mm x 76mm x 25mm as top track for fixing to the floor and top of the wall respectively including all necessary material required for erecting and fixing the wall panel complete as per the direction of the Engineer -in-charge. Finally the bevelled edges of the board in Rapicon Panel are to be jointed and finished so as to achieve flush finish, which includes Everest Jointing Compound & Fibre mesh tape as per the recommended practices of Everest Industries Limited. All peripherial joints/cutout are sealed with fire rated sealant.

Providing the MS Structure support and and fixing Non Asbestos Fibre reinforced aerated cement sandwich modules of 50mm thick, 600mm wide and 2400/2700/3000mm height made out of light weight fibre reinforced aerated cement/concrete core composed of portland cement, flyash, binders etc., with 5mm thick non-asbestos Fibre Cement Boards confirming Type-B,Catagory-III of IS 14862-2000 & ISO:8336:1993(E) on either side of the core. Panels having a tongue and groove on longitudinal side of the sandwich modules for joint of walls and partitions with apparent density minimum 700 Kg/cum, Thermal Conductivity (K-value) 0.12W/mK, maximum Axial Compresive Strength 42 Kg/Sqm. as per test method of ISO2380, P8:77 and having Fire Rating of 138min (Tested as per BS 476 Part 20-22). Sound Transmission Class of panels must be 40dB (Tested as per IS 9901 Part-3; 1981). These Panel modules are erected/ installed using galvanised iron steel tracks of 1mm thick, minimum 150GSM coated and of size 25mm x 76mm x 25mm as bottom track, 25mm x 76mm x 25mm as top track for fixing to the floor and top of the wall respectively including all necessary material required for erecting and fixing the wall panel complete as per the direction of the Engineer -in-charge. Finally the bevelled edges of the board in Rapicon Panel are to be jointed and finished so as to achieve flush finish, which includes Everest Jointing Compound & Fibre mesh tape as per the recommended practices of Everest Industries Limited. All peripherial joints/cutout are sealed with fire rated sealant.

Providing and fixing Waterproof membrane etc etc. complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting

Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.

Providing and fixing alluminium composite door shutter with all necessary fitting and fixtures etc complte.

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered.

Providing and fixing 2.00 mm thick polyvenyl venyl chloride flooring including leveling the base with white cement including pasting with appropriate material cleaning the surface etc. complete. (On Rent for 6 Month)

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Spec. No.:As directed by Engineer-In-Charge.

Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black back lite seat with all necessary pipe connection etc. complete.Spec. No.:As directed by Engineer-In-Charge

Providing and fixing on walls/ceiling/floor ---mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

40mm Dia

32mm Dia

25mm Dia

20mm Dia

15mm Dia

Providing and fixing 150 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Bd.V.39, Page No. 573

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Bd.V.9 Page No. 555

Providing and fixing screw down for 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Bd.V.9 Page No. 555

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Bd.V.38, Page No. 572

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, plywood/steel formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundqtion,fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete.

Providing and laying in situ / ready mix M-40 cement concrete of trap / granite / quartzite/ gniess metal for reinforced cement concrete block below the bearing including necessary scaffolding, plywood/steel formwork, compaction by vibrating, finishing in CM 1:3 and curing complete (Excluding reinforcement) Using reversible drum type mixer/ concrete batch mix plant (pan mixer)

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.)

Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete

Drilling or Core cutting horizontal, vertical or inclined holes in reinforced cement concrete and / or hard rock of following sizes for a depth / length upto 25 cm at all levels and locations as per directions of the PM.As Directed by Engineer In-charge

a. 75 mm dia

b. 100 mm dia

c. 150 mm dia

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.

Directional signage- Design, supply, fabrication and fixing acrylic multiligual braile (rise dots) direction sign board of size 6" x 9" design as per accessibility standereds and having 4mm thick acrylic base plate with upper case san serif words made on white acrylic non glair cut out letters of height 15mm raised not less than 0.8mm above baseplate and equivalent word writen in Hindi with Devnagari or Englishnon glair acrylic letters of height 15mm rised not less than 0.8mm above base plate and having non gair acrylic cut arrow point in required section. Each sign board to be fixed as per manufacturers specificatin on the wall at the approved location and at height of 1200mm from FFL and as per the directions.

Supplying And fixing Wash Hand Bsin with ready to use condition including taps, waste coupling, flexible pipe, water supply arrangement etc complete. ( On rent for 6 Months)

Providing and Fixing Suplying of office table of 1.22 X0.6 X 0.75 with one side drawer made up of 19mm, 12mm, 6mm ply etc. complete for Nursing station

Providing and fixing in position 8 feet height partition in position as indicated in drawing as derected by architect or Engineer-in-charge. The ulternet corner vertical member of the partition shall be taken upto the 8 feet level and same shall be anchored securely with the help of suitable cleats. the gap between framework shall be fill with glass wol 150 crwon etc. and same shall be finish with octonom sheets and suitable material i.e marin ply or waterproof plyor acron sheets etc, on both side finish as per following spacifications. The partition shall befinished with required fiting and fixture & harware etc complete.

Providing and fixing supplying receiption area, wating area rooms, Doctors cabin, food store farma store, nursing station doping and donning area with ocnom sheet / rapicon panels (50mm thick) orsimilar material, door and fixtures and closet including necessary fiting and fixtures etc...complete ( On rent for 6 Months)

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Providing Executive chairs.

Providing & Fixing Office chairs.

Providing & Fixing Stackable plastic chairs with arm rest

Stackable plastic chairs without arm rest

Providing Matress

Providing Bed sheet

Providing Blanket

Providing Pillow

Providing Pillow Cover

Providing Water Dispencer Hot and Cold of aquaguard Dimension in 380 X 340 X 1140 mm Weight in 33 Kgs. (dry), Dispense area 230 mm height, Standard Filtration Supplied Sediment Filter, Carbon Filter with capacity Header tank 11 lits, Cold tank 4 lits & Hot tank 1.5 lits Compressor 230V/50 Hz Compressor Water Temperature For cold 3 deg to 12 deg, Hot 87 deg

Providing Slotted angle racks.

Providing Floor mats. -( Rent for 6 Months)

Providing Glass round table

Providing Catering table

Providing Sand / Fire Bucket

ELECTRICAL DEPT. Electrification of ICU Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-W/SW

Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW

Supplying and erecting Five star rated energy saving Ceiling fan 230 V A.C 50 cycles 1200 mm. sweep complete erected in position as per specifcation no. FG-FN/CF

Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.

Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting electronic type 300/450 W dimmercomplete erected on provided switch board.

Supplying & erecting LED 20W battern WH PVC 5700K to 6000K CRI>70% Lumen efficacy >100 lumens per watt voltage 230 V AC.

Supplying & erecting mains with 3x4 sq.mm FR copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC trunking (PVC casing-ncapping) of size 40 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 modules duly erected.

Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting flush type shockproof plug socket 6A & 6A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board.

Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Providing, erecting and commissioning 4 pole RCCB ofelectromagnetic type with 30/100/300 mA sensitivity and having capacity of 63A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/A

Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying & erecting triple pole and neutral distribution board(TPNDB) with door surface/ flush mounted SPMCB of 12 ways,on iron /GI frame (horizontal busbar type) as per specification no.SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 ways,on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution boardTPNDB) with door surface/ flush mounted suitable for 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with jointsrequired. As per specification no EA-EP

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing & erecting 4 Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads,provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Supplying & erecting mains with 4x25 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount unit as per specification complete

Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Supplying Pedestal fan 400 mm. 230 Volts 50 cycles oscillating type complete with guard and regulator 3 mtrs. of flexible wire and hand shield type 3 pin plug top.

Supplying Integrated LED emergency type rechargeable table lamp of 4.5W with battery of 2000 mAh capacity with continues backup of 3hrs including with charging cord suitable for 230V AC power supply.

Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting storage type horizontal / vertical water heater 25 litres capacity with BEE 5 star rating high impact resistance engineering plastic body on wall / loft complete duly tested and marking sr. no. and date of erection. specification no.AP-WH/STWH

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SWRCCB/RCCB

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting Electronic Type cordless call bell erected on T.W. board having portable bell push working on 9VD.C. battery and (effective range upto 45 meter) bell on 250 V A.C.supply.

S & E of new Automatic Transfer/changeover switch 4 pole 200 to 250A including necessary accessories such as coil , relay etc. including coil eq. to ABB Descr OTM200E4CM230C order code 1SYN022846R1590

Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment

Powder coating of approved colour shade on both sides of provided iron work / MS / CRCA sheet steel work complete including antirust treatment in an approved manner.

Supplying and erecting bus bar chamber triple pole with neutral with four copper bars, 500V 200A complete as per specification no. CPBB

Supplying and erecting bus bar chamber triple pole with neutral withfour copper bars, 500V, 100A complete as per specification no. CPBB

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 300A complete as per specification no. CP-BB

Supplying and erecting Iron, sheet metal work consisting of CRCA Sheets, Various sections of iron plates chequred plates, Rods, Bar, MS pipes etc for panel boardor any other process complete bending cutting drilling and welding complete erected at the position with necessary material duly painted with one coat of red oxide and two coat of enamel paint to match the switch gears or as per the direction by the authority

Supplying and erecting dual source intelligent flush mountedpanel meter three phase four wire (IPM) 415V CT/ PT siteprogrammable class I flush mounted (96 x 96 mm) meter with voltage, current, frequency, power factor , ON hrs, kWh, EB and DG set metering with LED display (excluding CT'S) complete with RS 485 communication protocol, class I accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates

Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying and erecting fresh air cum exhaust fan of light duty250V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wiremesh, duly erected in an approved manner

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S.flat with nut & bolts grouted in wall complete.

Supplying & erecting fixed celluar Terminal for using sim card as landline with required power supply , antennae and othe accessories.shall be compatible with all the sim cards. SITC of online UPS

SITC OF ONLINE UPS

Supplying & erecting on line UPS pure sine wave of 40 kVA capacity with min 30 min backup complete with min 100AH batteries standard features, along with necessary batteries and required slotted angle racks for specified battery backup, bypass switch, automatic fault display , required protection circuit for overload/shortciruit etc. eq. to Etion

SITC OF DUCTABLE/PACKAGE UNIT

Supply of Aircooled Ductable/Package unit of11TR capacity Complete with all accessories and control panel. (Double circuits) eq. to Bluestar/Voltas

Supplying , Laying/fixing , testing& commisisoning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line /Suctio line supply and return piping of suitable guage (hard drawn copper pipe for liquid main line and main for refrigerant ) along with necessary supports , hanger, clamps, vibration isolators and fitting such as bends tees , valves, guages strainers with insualation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages funal growth, flame spread, water permeance and ultra violet radiations complete with OEM Standards of VRV/VRF aircondition system.

Supplying , Laying/fixing , testing& commisisoning of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line /Suctio line supply and return piping of suitable guage (hard drawn copper pipe for liquid main line and main for refrigerant ) along with necessary supports , hanger, clamps, vibration isolators and fitting such as bends tees , valves, guages strainers with insualation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages funal growth, flame spread, water permeance and ultra violet radiations complete with OEM Standards of VRV/VRF aircondition system.

Supplying and erecting GI Sheet 1 MM (20SWG) to be used for fabriaction of boxes panel boards etc. including cutting bending drilling , welding , reveting etc. and painting with one coat of red lead paint & 2 coats of enamel paint.

Supplying and erecting GI Sheet 0.8 MM (22SWG) to be used for fabriaction of boxes panel boards etc. including cutting bending drilling , welding , reveting etc. and painting with one coat of red lead paint & 2 coats of enamel paint.

Supplying and erecting GI Sheet 0.6 MM (24SWG) to be used for fabriaction of boxes panel boards etc. including cutting bending drilling , welding , reveting etc. and painting with one coat of red lead paint & 2 coats of enamel paint.

Supply, installation , testing & Commissioning of volume control box with collar damper of required size in GI construction complete with operating mechanism , mounting arrangment , rubber refrigerant kits etc. complete

Supply fabrication, installation an testing of flexible canvass connections constructed between ducatble unit/dampers /ducitng of requirewd size with fire resist flexible double canvas sleeve complete.

Providing adhesive thermal insulation for supply return airduct with 19 mm nirtrile rubber insulation having R-Valve as per the prevailing provision in ECBC-2007

Providing and applying of accoustic insulation for air ducts with 25 mm thick, 48/cu-m fibre glass faced with RP tissue and covered with 26 SWG Perforated aluminium sheets complete

Supply & Fixing of 40mm PVC Piping for drainge of condensate water.

Installation, Testing and Commissioning of Package Airconditioning Plants with gas charging for 11TR Unit

Supplying, erecting & terminating XLPE armoured cable 4 core 16 sqmm copper conductor with continous 5.48 sq.mm(12 SWG) GI. Earth wire complete erected with glands & lugs on wall /trusses/pole or laid in provided trench/pipe as per specifiaction.

Supplying & Erecting of insulated PVC round sheated 2.5 sqmm(50 x 0.25 mm dia) 3 core flexible multi starnded copper industrial cable for voltage grade upto 1.1 Kv

Supplying and erecting Iron, sheet metal work consisting of CRCA Sheets, Various sections of iron plates chequred plates, Rods, Bar, MS pipes etc for panel boardor any other process complete bending cutting drilling and welding complete erected at the position with necessary material duly painted with one coat of red oxide and two coat of enamel paint to match the switch gears or as per the direction by the authority

Supply, installation, testing and commissioning air curtain of 4 feet width having air throw velocity of 21 m/sec, low noise level up to 38 to 46 dB suitable for door height upto 9 feet, working on 1ph, 230 V, 50Hz, A.C. supply.

Supply, installation, testing and commissioning air curtain of 6 feet width having air throw velocity of 21 m/sec, low noise level up to 38 to 46 dB suitable for door height upto 9 feet, working on 1ph, 230 V, 50Hz, A.C. supply.

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs,on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing & erecting 4Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable thermal overload) setting and fixed magnetic setting with provided leads,provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP

Supplying and erecting bus bar chamber triple pole with neutral withfour copper bars, 500V 200A complete as per specification no. CPBB

Powder coating of approved colour shade on both sides of provided iron work / MS / CRCA sheet steel work complete including antirust treatment in an approved manner.

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 3.50 to 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete withmaximum 3.99 suitable to operate on Refrigerants R410 A/R32 and copper condenser at position. specification no. AP-AC/SAC

Supplying, installing, testing and commissioning tower type room air conditioning unit of 3.5TR capacity suitable to operate on 415 V, 50 cycles ac supply having 1 no. AHU and 1 no cabinet type floor mounting type condensing unit with refrigerant R32/R410A & copper condensor coil complete with anticorrosive fins, dust filters hydrophilic evaporator fins, powder coated outer body, with scroll /rotary compressor connected with provided refrigerant pipes, electric cables and drain pipe.

Medical Gas

Supply and installation medical gas copper pipe make (Medical Grade Mandeve , Maxflow )/Equivalent

12 mm copper pipe ( thickness 0.7 mm )

15 mm copper pipe ( thickness 0.9 mm)

22 mm copper pipe ( thickness 0.9 mm )

28 mm copper pipe ( thickness 0.9 mm )

42 mm copper pipe ( thickness 1.2 mm )

54 mm copper pipe ( thickness 1.2 mm )

Isolation ball valve with both side end fittings make ( RN )Equivalent

Isolation Valve Box with valve 3 gas service

Micro processor based Digital area Gas Alarm with mute, testing keys

1 gas service

3 gas service

Bedhead panel with powder coated paint, minimum 4’ Long with provision of gas outlets two nos O2,Vacc ,& Air 4 bar , Electric switch socket 16 Amp ( 10 switch + 10 Socket )

Medical oxygen outlet point with ss threaded prove,

Medical Air 4 bar outlet point with ss threaded prove,

Medical vacuum outlet point with ss threaded prove,

Electrical Switch/Sockets 16 Amp ( 6 Modular Plat)

Metal body flow meter with Humidifierbottle

Ward vacuum unit with regulator , 600ml jar with vacc slider,

Moniter Stands (GI Powder Coated)

High pressure tube for Bed head panel drop down from ceilling, O2-200 mtr , Air 4 bar-200 mtr

Low pressure tube , Vacuum

12 + 12 oxygen manifold system complete with NRV system return valve set and flexible tail pipes connections,

Fully automatic oxygen control panel with NRV and 40 micron filter on both side,high pressure safety valve with high grade tail pipe

Compressed Air System Oil free Air compressor, (4 nos.), Providing, fixing, testing, commissioning with one 2000 ltr capacity Air reservoir tank , one 200 cfm air dryer , 4 nos 15 HP 3 phase motor & starter with 2 no. 3 stage PXY filter make Anest Iwata / Equivallent

Vacuum system Vacuum pump (2nos.) with 10 HP 3 phase motor & starter with 2000 ltr capacity reservoir tank 1 no. with 2 nos Anti-bacteria filter & silencer make Anest Iwata / Equivallent

Supplying 20KL Medical L:iquid Oxygen Vessel With making Necessary foundation for Tank and Vaporiser.Also doing all necessary Civil Electric, Plumbing And Fencing work Required..Also to connect vessel to main Control Paneel With Copper Pipeline .

Facility Charges for Operatoion of Liquid Gas With24X7 providing Manpower.

A E infra projects pvt ltd