SPECIAL REPAIRS TO BUILDING NO T-170 AT ATS BELAGAVI UNDER GE (AF) SAMBRA

Amount

Dismantling Asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section and in any position in unframed work complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section and in any position in framed work complete all as specified and directed

M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel, or flat section) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) quality-A complete all as specified and directed

M&L for mild steel work for wind ties for roof including securing bolts including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not exc 10cm in width or girth, when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed.

M&L for pre painted galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. (Note :- The length of self tapping screw may vary for wooden and steel truss. Contractor to quote rate accordingly.)

M&L for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed. Note :- The length of self tapping screw may vary for wooden and steel truss. Contractor to quote rate accordingly.

Dismantling of brickwork and stone / boulder masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for providing plain cement concrete, type C1, 1:3:6 (using 20mm graded stone aggregates) as in bed blocks, similar blocks, etc., including necessary form work complete all as specified and directed

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for pre-cast cement concrete block masonry with solid blocks type C1, PCC 1:3:6 (using 20mm graded stone aggregates), exc 10cm in width and setting in CM 1:6 complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks type C1, PCC 1:3:6 (using 20mm graded stone aggregates) 10cm thick in width and setting in CM 1:4 complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair face of brick work or concrete surface in CM 1:4 in two coats (5mm setting coat mixed with WPC over 10mm thick backing coat) for wall finished even & smooth without using extra cement complete all as specified and directed. Note:-Water proofing compound shall be measured and paid separately as "Supply only"

M&L for applying two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on new plastered surfaces of walls complete all as specified and as directed .

M&L for rendering 10 mm thick on surface other than fair face of block masonry/brick work in CM 1:6 for wall finished even & smooth without using extra cement all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper on walls over a coat of alkali-resistant priming paints over 3mm thick wall care putty complete all as specified and directed

M&L for preparing old plastered ceilings surfaces and applying three coat of white wash complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness including cover fillets and frame work complete all as specified and as directed.

S&F PVC board solid 5mm thick/ PVC hollow board 8 to 10mm thick of size 600mmX600mm design approved by Engineer-in-Charge in ceiling over powder coated aluminium snap grid frame work supported by hanger 2 to 4 mm dia GI (up to length as per site requirement) adjusting level fixed to roof slab/walls/wooden/steel members by means of ceiling cleats made out of GI flat 40mmx3mm size 60 cm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified for false ceiling fixed with screws as per manufacturer's instruction complete all as specified and as directed.

Dismantling of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and RCC water tanks on roofs (including reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Separating, scraping and cleaning of reinforcement obtained from dismantling of RCC tanks, beam complete

M&L for roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing with neat cement slurry @ 3 Kg of cement per Sqm complete all as specified and as directed.

M&L for preparing RCC roof slab by removing dust, dirt and applying oil bond bituminous primer @ 0.2Kg/Sqm and providing APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 gms/sqm including minimum 10cm side over laps and 15cm end lap torch sealed and bonded as per detailed procedure on Note No. 6 of TD AFB/TD/260/06 sheet 1/1 and applying a coat of blown hot bitumen 95/15 over a membrane at 1.20 kgs/sqm all as per detailed specification and procedure after drying apply a coat of solar reflective bituminous aluminium paint over membrane at 0.10 kg/sqm all as specified and as directed. Note:- The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT.

Demolition of stone slab and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish off the premises complete all as specified and directed.

M&L for non - skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including screed bed 15mm thick in CM(1:6) complete all as specified and directed

M&L for glazed ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces such as in skirting, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including laid over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for non - skid ceramic white tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including screed bed 15mm thick in CM(1:6) complete all as specified and directed

M&L for glazed ceramic tiles of size 450mmX 300mmX 7mm thick on vertical surfaces such as in skirting, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including laid over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames not exc. 1.5 Sqm each withshutters (without taking off shutters from the frames) complete all as specified and directed

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4 Sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed

S&F factory made single extruded WPC (Wood Polymer Composite) solid door & other frames/chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed Note: For WPC solid door frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/Sqmm , modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately

S&F factory made wire mesh solid WPC (Wood Polymer Composite) door shutter (single/double leaf) consisting of density density of 500 kg/cum, door to be with SS mosquito wire mesh and XTN aluminium mesh for additional strength and safety pourpose. the door should be water proof, termite proof, fire retardant, and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. fixing with butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed (Note: Butt hinges and other fittings shall be paid separately

S&F 125 mm long butt hinges stainless steel to door frame with necessary screwing or bolting complete all as specified and directed

S&F 100 mm long butt hinges stainless steel to door frame with necessary screwing or bolting complete all as specified and directed

S&F 150 mm long Aluminium anodised handle fabricated type complete all as specified and directed

S&F 125 mm long Aluminium anodised handle fabricated type complete all as specified and directed.

S&F 150 mm long Aluminium anodised barrel tower bolt complete all as specified and directed .

S&F 300 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and directed

S&F Aluminium sliding windows shutters powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, three track (two for glazed and one for wire mesh) without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick plain glass and stainless steel wire mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces including powder coated aluminium grill (not less than 1.5Kg/Sqm) fixed to frame with channel complete all as specified and directed with the following sections of sliding window :- (a) Main Frame bottom section : Jindal section No 20620 or equivalent make as specified in list of makes of Particular Specifications (b) Main Frame top & sides section : Jindal section No 206218 or equivalent make as specified in list of makes of Particular Specifications (c) Sliding shutter section (handle ) : Jindal section No 20738 or equivalent make as specified in list of makes of Particular Specifications (d) Sliding shutter section for top & bottom : Jindal section No 20736 or equivalent make as specified in list of makes of Particular Specifications (e) Sliding shutter section for interlock : Jindal section No 20737 or equivalent make as specified in list of makes of Particular Specifications

S&F Anodised aluminium powder coated windows and ventiators shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, screws, anodised aluminum fittings such as peg stays 150mm long-01 No., hinges type B-21 100mm long-02 Nos), suitable size handle-01 No. complete all as specified and directed

S&F figured glass, pin head type 4 mm thick, not exceeding 0.5 Sqm for each pane, glazing with oil putty or aluminium beading complete all as specified and directed

S&F decorative stainless steel curtain rod 25 mm dia, 1.25mm wall thickness complete all as specified and directed

S&F stainless steel brackets for fixing of 25mm dia curtain rod to wall and including decorative stops/ rollers/end cap fixed to both ends of 25mm dia stainless steel rod complete all as specified and directed Note: Each pair inclusive of two numbers of stainless steel brackets and two numbers of decorative stainless steel stops/roller/end cap.

S&F PVC half round 160mm bore rain water gutter eaves complete all as specified and as directed.

S&F PVC runner drop of size 160mm complete all as specified and as directed

S&F PVC stop end drop of size 160mmX110mm complete all as specified and as directed

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with suitable size mild steel clamps complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed

M&L for plain cement concrete 75mm thick 1:2:4, type B1 (using 20mm graded stone aggregates) for subbases, floors & pavings and plinth protection complete all as specified and directed

M&L for hand packing and filling of broken stone or boulders and hard core of gauge not exc. 63mm, deposited spread and levelled in layers not exc 75mm thick watered and rammed to a true surface complete all as specified and directed

M&L for Anti termite treatment for soil under plinth protection at the rate of 5 ltr of emultion per Square metre surface area complete all as specified and directed

M&L for Anti termite treatment for soil alongwith external perimeter of building at the rate of 2.25 ltr of emultion per metre of the perimeter wall complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) three layeredwall construction, ISI marked hoisting and fixed in position complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks of 2000 ltrs capacity (cylindrical vertical with closed top) three layeredwall construction, ISI marked hoisting and fixed in position complete all as specified and directed

S&F Nipple suitable for HDPE water tank.(Minimum weight 15mm-38gms/20mm?45gms /25mm- 65gmcomplete all as specified and directed

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 25mm bore dia of pipe and fixed (minimum weight 25mm - 455 gms) complete all as specified and directed

S&F vitreous China wash down water closet (pedestal pattern), white with P trap/ S trap (excluding fluhing cistern and flush pipe) including seat cover complete all as specified and directed

S&F vitreous China squatting pan Orissa pattern of size 630mm x 450mm white with integral foot rest (excluding flushing cistern and flush pipe) including lime concrete bedding all round and finished just below level of rim of pan to receive the floor complete all as specified and directed

S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet,ball valve, float and handle including necessary brackets & screws as required complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F in repairs wash basins, vitreous China (flat back or angle back type) of size 550mmx400mm, excluding taps, waste chain and plug but including brackets etc complete including cutting for and pinning in ends of brackets or erecting stand ,waste pipe complete all as specified and directed.

S&F in repairs waste coupling CP of 32 mm bore for wash hand basin complete all as specified and directed

S&F in repairs high density polythelene Flexible waste pipe, 40 mm dia, suitable for wash hand basin complete all as specified and directed

S&F in repairs chromium plated soap dish holder complete all as specified and directed

S&F brass chromium plated tubular towel rail 600mm long between flanges including all necessary fittings complete all as specified and directed

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repairs brass chromium plated shower rose 125mm size with shower arm fixing with 15 mm pipe. complete all as specified and directed.

S&F in repairs of Brass CP mixer for mixing hot & coldwater screwed down for iron pipe and fixed complete all as specified and directed

S&F in repairs 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight 15mm-90gms/20mm 125gms) complete all as specified and directed.

S&F in repairs 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-110gms) complete all as specified and directed

S&F in repairs 15mm dia bore angle valve of PTMT any colour high pressure screwed for iron pipe (minimum weight 90gms) complete all as specified and directed

S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed

S&F Unplasticised PVC pipes 40mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including all fitting such as bends,elbows, tees tank connector and fixing to existing pipe complete all as specified and directed

S&F Unplasticised PVC pipes 25mm bore pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including all fitting such as bends,elbows, tees tank connector and fixing to existing pipe complete all as specified and directed

S&F Unplasticised PVC pipes of 15mm bore pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, unions, tees, reducing tees, adopters, sockets, plugs, hose clips, brass fittings etc complete all as specified and directed

S&F 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors ccomplete all as specified and directed

S&F PVC SWR pipe 110 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F PVC SWR pipe 75 mm bore, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 110 mm dia bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and directed

S&F 75mm dia bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and directed

S&F 110 mm dia bore PVC (SWR) bend of any radius complete all as specified and directed

S&F 75 mm dia bore PVC (SWR) bend of any radius complete all as specified and directed

S&F 75 mm dia bore PVC (SWR) bend with oval access door of any radius complete all as specified and directed

S&F 110 mm dia bore PVC (SWR) bend with oval access door of any radius complete all as specified and directed

S&F 75 mm diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75 mm dia PVC vent cowl complete all as specified and directed

S&F in repairs PTMT Grating doom 100 mm dia with waste holes complete all as specified and directed.

Excavation in trenches,not exceeding 1.5m wide and not exceeding 1.5m in depth and getting outin hard/dence soil type of soil complete all as specified and directed

M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregates) as in foundations,filling and mass concrete complete all as specified and directed

M&L for re-inforced concrete pipe of 150mm bore of class NP-2 laid and jointed complete with collars complete all as specified and directed

M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregates) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of 150mm bore after they are laid and tested complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) as in coping including weathering slightly rounded or chamfered angles and throating and including necessary use and waste of form work complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed

M&L for pre cast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) as in cover slab set in cement mortar 1:4 complete all as specified and directed. NOTE: Reinforcement shall be measured and paid separately.

M&L for TMT bars 6mm dia to 8mm dia cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for round bars 12mm for handles dia cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Returning,filling including, spreading, levelling , watering and well ramming inlayers not exceeding 25 cm in any type of soil complete all as specified and as directed. .

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Cutting exising manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed.

Taking down carefully unserviceable main switches/DB's/Metal socket off size including MCBs from their position and removing materials from site complete all as specified and as directed.

S & F galvanised iron pipes 40 mm bore,. light grade, with all fitting and fixed complete to poles/route/drains etc and ceillings or laid in floors complete all as specified and as directed.

M&L for point wiring for the following with stranded FRLS copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sqmm single core in and including new non-metallic rigid PVC concealed conduit, not less than 20 mm dia, medium duty ISI marked, including conduit fittings such as tees, bends etc terminating in and including MODULAR METAL FLUSH BOX ,modular white cover plate any size with support frame any size module complete all as specified and as directed. cover of approved make, for one fan or light or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, multi stranded as earth wire to common earth & connecting to earth dolly complete all as specified and directed:-

One light point controlled by one, one way switch 5 Amp

One light point controlled socket point on the same board with other switches complete as specifed as directed

One light point controlled socket point on indpendent board

All as per Srl item No 112 above but one 3 pin socket outlet 15 Amps independent with cable 4 Sqmm size

S & F switch Modular type single pole 6 Amps One Way Switch AC 230V, 50HZ supply complete all as specified and as directed. Make : Cat Part No. 800100 of Indo Asian ELVIRA/Cat Part No. ACWSXXW101 of Havells CRABTREE(Signia) or any other equivalent make as specified in list of make of Particular Specifications as approved by GE.

S & F switch Modular type single pole 16 Amps One Way Switch with indicator AC 230V, 50HZ supply complete all as specified and as directed. Make : Cat Part No. 800105 of Indo Asian ELVIRA/ ACWSXIW161 of Havells CRABTREE(Signia) or any other equivalent make as specified in list of makes of Particular Specifications as approved by GE.

S & F Modular type socket 5A AC 230V, 50HZ complete all as specified and as directed. Make : Cat Part No.802800 of Indo Asian ELVIRA/ ACWKPXW063 of Havells CRABTREE(Signia) or any other equivalent make as specified in list of make Particular Specifications as approved by GE.

S & F Modular type switch combine 6A/16A multi purpose AC 230CV, 50Hz complete all as specified and directed. Make : Cat Part No.800122 of Indo Asian ELVIRA/ ACWKCXW163 of Havells CRABTREE(Signia) or any other equivalent make as specified in list of make Particular Specifications as approved by GE.

S&F ceiling rose surface backelite three terminal 240 volts complete all as specified and directed

S&F modular fan step regulator, 120W - 2 module complete all as specified and as directed. Make : Cat Part No. 800139 of Indo Asian ELVIRA/ ACWRFHW008 of Havells CRABTREE(Signia) or any other equivalent make as specified in list of make Particular Specifications as approved by GE.

S&F LED lights fitting 1x 20W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed. Make: Cat Part No: LUMILINE+BS20WLED830SPCSSIND of Havells or any other equivalent make as specified in list of make Particular Specifications as approved by GE.

S&F LED lights fitting 1x 10W, 220V, wall mounted LED batten with Aluminum Housing & integrated electronic driver including connecting up with 0.5Sqmm three core flexible copper conductor cable from ceiling rose complete all as specified and as directed. Cat Part No: LUMILINE+BS10WLED865SPCSS of Havells or any other equivalent make as specified in list of make Particular Specifications as approved by GE.

S&F ENDURA SUN DOWN energy saving and environmental friendly long life LED street light made of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP66 protection and impact resistance of IK08 LED street light of 35 Watts with sutable size bracket made to shape of 40mm bore GI pipe medium grade of 1.4 mtr length including MS clamps 25 x 4 mm - 02 Nos with nut bolts washers complete all as specified and directed.complete all as specified and directed. Make:- Havells Cat Part No - ENDURASUNDOWNSL35WLED765PASYBOPC or any other equivalent make as specified in list of make Particular Specifications as approved by GE.

S&F in replacement sub main wiring in PVC concealed conduit min 25 mm dia with 2 single core 06 sqmm FRLS multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 06 sqmm copper conductor cable connected to common earth dolly complete and including PVC concealed conduit all as specified and as directed Note:Two run of 6 sqmm and one run of 6 sqmm will be measured as 1 RM.

S&F sheet metal enclosure double door factory made distribution board 240 volts SPN 12 way, 200 Amps rated bus bar complete all as specified and as directed.

S&F sheet metal enclosure Double Door factory made distribution board 415 voltsVTPN 8 way, 250 Amps rated bus bar complete all as specified and as directed.

S&F MCB SPN 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.

S&F MCB SP 06 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.

S&F MCCB 3 pole 125 Amps, 16 KA, 415VOLT, 50 Hz AC supply complete all as specified and directed.

M & L for taking down ceilng fan/exhaust fan, dismantling blades, capacitor, bearing, bush and painting of fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling/exhaust fans with dismantled blades, capacitor, bearing, bush and connecting up including provision of 0.5 Sqmm 3 core cable from ceiling rose to connector of fan complete all as specified and directed..

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting the wall as round shape for exhasut the air complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre depth below normal ground level) with top edge of plate at a depth not less than 1.5 mtr below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to galvanized earth wire 04 mm dia with and including bolts, nuts, check nuts and washers of galvanised iron or steel and riveted to earth plate and one end and connecting to main switch board or metallic bodies of HT/LT equipments etc at the other end, GI wire encased in and including 15 mm bore GI light grade pipe with all fittings, from top of electrode to body of equipment fixed with and including flatiron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI light grade and including funnel, wire mesh, copper lugs etc from bottom of earth pit to top of electrode complete with earth pit in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate and CI cover complete all specified and shown in electrical plate No 03 of SSR Pt-I connecting earth electrode to test point with and including earthing lead including neessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50m, material and labour complete all as specified and as directed by Engineer-in-Charge. (Notes 1. The rate quoted shall be deemed to include for all the above provisions. 2. PCC chamber shall be constructed at least 1.5 m away from the earth electrode and pipe for watering shall be provided in slanting maner) .

Supplying, laying, jointing, testing and commissioning 35 Sqmm, 3.5 Core, LT XLPE insulated, PVC sheathed armoured heavy duty electric cables LT 1100 volt grades with aluminium stranded conductor passing through pipes, in duct, on poles,in trenches, under road etc including dismantling old unserviceable cable complete all as specified and directed .

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F water heater storage type, electric,capacity 25 litres.BEE 5 star rated electrode complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator andaccessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F double wall corrugated HDPE Pipe IS-16205, outer dia 40 mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT coupler and all fittings as required at site complete all as specified and as directed

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 10 Amp including taking out the unserviceable plug and socket complete all as specified and directed..

Vinod Enterprises (BID ID -3345742)

M/S MAHADEV M PATIL (BID ID -3340459)

RAJENDRA KRISHNA SARAF (BID ID -3344997)

M/s. N D KALING (BID ID -3345203)

shree bhavani constructions (BID ID -3345474)

DHAIRYASIL RAMAKANT DESAI (BID ID -3345930)

M/S ADITYA CONSTRUCTIONS (BID ID -3343746)