Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Tender Found in Order | |
| 2 | L2₹48.4 L+₹13.6 L (39.1%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Tender | |
| 3 | L3₹46.9 L+₹12.1 L (34.8%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest Tender |
Tender Value
Refer Docs
EMD Value
₹84,500
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO T 37 AND T 38 AT CHOWKIBAL AND PROVN OF BATHROOM AND 02 WC NEAR BLDG NO T 85 AT CHOWKIBAL GARRISON
2022_MES_543729_1
GE 874/EWS-41/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
6 documents required · 6 mandatory
₹500
GE 874 EWS
₹84,500
Yes
12 Nov 2022
6 Aug 2022
5 Sept 2022
6 Aug 2022
3 Sept 2022
20 Aug 2022
6 Aug 2022 - 13 Aug 2022
Amount
B/R and E/M Portion
Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as directed.
Excavation in trenches n.exc. 1.5m wide and n.exc 1.5m in depth for foundation etc in hard /dense soil complete all as specified.
Returning and filling including spreading leveling watering and well ramming in layers n.exc 25 cm in hard/ dense soil all as specified.
Removal of excavated materials not exc 50cm and depositing where directed at a level n.exc 1.5m above the starting point all as specified.
Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work.
M&L for second class soft wood as in scantling clean sawn fixed in position.
M&L for second class soft wood as in scantling clean sawn fixed in position but except wood.
Dismantling of boarding, any description, fixed in any position with nails.
M&L 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.
M&L 2nd class hard wood, 35 mm wrought treads with rounded nosings, with 20 mm wrought risers on tongued both edges, glued, wedged and blocked complete.
M&L 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in walls.
M&L 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in ceiling.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.
Plain fillet, square, rectangular or triangular in section, clean sawn exc. 3 Sqcm sand not exc. 6 Sqcm secured with nails.
S&F Mild Steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E 250 quality A) all as specified and directed by Engineer-in-Charge.
Mild Steel stractural steel work such as in Roof trussed (framed) purlins crane guntries rail & fastening and heavy bracket (beam tea angle channel or flat section of Fe 410 -W (GdeE- 250) including distance pieces cleats etc all as specified.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping .
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness.
M&L 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm stone aggregate as in plinth protection of bldg complete all as specifed.
M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick screed bed in CM (1:4) laid over sub base for laying kota stone slab in floor complete all as specified.
M&L Granite (of any type) tiles 18 to 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement including 15mm thick screed bed in CM 1:4.
Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B0 using 12.5mm graded crushed stone aggregate, complete all as specified and directed.
Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.
Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc.
M & L for rendering 15mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing in CM 1:4 finished over and smooth w/o using extra cement.
M&L for 10mm thick CM 1 : 6 as in internal Plastering to fair face of brick masonry walls and finished even & smooth.
M&L applying three coats of white washing including preparation of newly plastered surface of wall complete all as specified.
M&L applying two coats of white washing including preparation of old surface plastered surface of wall complete all as specified.
M&L applying two coats of OBD including preparation of newly plastered surface of wall complete all as specified.
M&L applying one coats of OBD including preparation of old surface newly plastered surface of wall complete all as specified.
M&L applying one coat of cement based paint on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down surfaces complete all as specified.
M&L two coats of cement based paint on external wall surfaces over a coat of primer incl preparation newly plastered surface complete all as specified.
S&F 18mm thick one side prelaminated / decorative board fixed with supporting beads of 2nd class hard wood in cup board , portion , shelves complete all as specified and directed.
S&F 30mm continous piano type hinges mild steel bright finish or electro galvanised all as specified.
S&F 75mm long Brass handles, cast type, polished.
S&F Brass drawer locks, Grade-1, size 65mm, 4 levers.
M&L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types.
Taking down chowkhats of frame exc 1.5 sqm and n. Exc 4 sqm each with shutter (without taking off shutters of the frame), complete all as specified.
Taking down shutter exc. 1 sqm and not exc 2 sqm each and removing to store all as specified and directed.
S&F soild PVC door frame of size 50mm x 47mm made out of 5mm plaint color PVC sheet reinforced with MS square tube, and fitted in opening all as specified.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain color PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete omplete with glazing bars, dove tailed or welded including one shop coat of zinc chromites primer complete all as specified and directed.
S&F 2nd Class soft wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.
30mm thick 2nd class soft wood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium.
M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.
M&L 30mm thick 2nd class soft wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (divided in square with sash bars), edges of framing plain, chamfered or rounded all as directed by Engineer-in-Charge.
Aluminium anodised, barrel tower bolts of extruded section of size 200mm and fixed, complete all as specified and directed.
300 mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extrusted sections and fixing bolts and sliding bolts of extruded section of cast aluminium alloy all as specified.
Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified.
Mild steel butt hinges, medium weight, cold rolled,75 mm long, complete all as specified.
S & F 125mm long aluminum alloy, anodized barrel tower bolt of extruded section.
S&F Aluminium handle, cast type, anodised 100 mm long.
Galvanised mild steel wire cloth having 0.56mm dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, fixed in repairs, complete all as specified and directed.
Aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed.
Aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
M&L Sheet glass ordinary quality, 3mm thick, glazing with oil putty or wooden beads in squares exceeding 0.50Sqm in each pane, complete all as specified and as directed.
Decorative type powder coated drapery rod 20mm dia with powder coated fancy type end knobs and fixing brackets as per design approved by GE complete all as specified and as directed.
Stainless steel sink 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm fixed, complete all as specified.
Stainless steel plate rack made out 1.00mm thick over all size 900X1200mm complete all as specified and directed. Make:- Jaquar or equivalent make as approved by GE.
Construction of brick work or stone masonary stagging for over head water tank 2.40 mtr heigh from ground level including necessary earth work in any type of soil all as shown in drawing complete all as specified and directed.
S&F in repair rotational moulded polythylene water storage tank capacity 1000 Ltrs (cylindrical virtical with closed top) hoisted with 200mm dia brass float valve with polythylene ball and fixed in position in position as specified. (Make : Sintex/Rotax/Jindal).
M&L for Vitreous china squatting Pan "Orrisa Pattern" size 580 x 440mm white with integral foot rests incl flush pipe of PVC 32mm dia for low level cistern fixed in repair complete all as specified.
S&F PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets (10 Ltr) capacity fixed in repair complete all as specified and directed.
S&F in repair Gun metal globe or gate valve iron wheel head, screwed both ends for iron pipe of bore of 15mm.
S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia.
S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 25mm dia.
Taking up or down steel tubing and connection including cleaning for refixing or removing store, bore of pipe 15mm.
Taking up or down steel tubing and connection including cleaning for refixing or removing store, bore of pipe 20mm.
S&F tubing galvanished iron medium grade with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm.
S&F tubing galvanished iron medium grade with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 20mm.
S&F tubing galvanished iron medium grade with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 25mm.
M&L Lagging to pipes 15mm dia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842.
M&L Lagging to pipes 20mm dia used in internal water supply or plumping all round with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 kg/cum conforming to IS-9842.
S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.
S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.
S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified.
M&L for PVC (SWR) WC connector with lip ring 110mm.
M&L for PVC (SWR) vent cowl for 75 mm dia all as specified.
S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement.
S&F PVC gully trap square or round mouthed type (P), size of trap 125x 110mm and jointing to drains with solvent cement in repairs complete all as specified.
M & L for Vitreous china wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end.
M&L for CP pillar tap with capstan head chromium plate 15 mm bore fancy type.
S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified.
Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions.
S & F in repairs stop valve fancy type chromium plated brass screwed down high pressure, screwed both ends for iron pipes or for unions 15 mm bore.
Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked).
S & F Waste coupling of PTMT (half or full thread ). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB, sink.
Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified.
S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union.
Grating doom 100mm dia of PTMT (Minimum weight 25gms.
Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.
M&L Pre-cast Reinforcement cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregates as sheves and manhole cover slab, set in CM 1:4 complete all as specified.
MS TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.
M&L MS TMT bars 6 to 8mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.
M&L Cement concrete 1:4:8 type B-2 (using 40mm graded aggregates) as in sub base of path, all as specified.
M&L for 60mm thick machin pressed precast concrete interlocking paver block of any shape and size with gray cement and pigment to match conforming to IS 15658-2006 of M 35 gradewith30mm thick sand cushioning complete all as specified and directed.
Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.
M&L and labour Sand filling under floors for laying for interlocking tiles as in base.
M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths.
M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of old wooden surface exc 10 cm width or girths.
M & L two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth all as specified.
M&L Moorum/red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, leveled and rammed including watering.
M&L hard core of guge in exc. 63mm deposited spread and levelled in layersn.exc 15cm thick watered and rammed to a true surface.
M&L 75 mm thick PCC type D2 1:4:8 (40 mm graded crushed stone agg) as in sub base of hard standing all as specified and directed by Engr-in-Charge.
Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete article built in cement mortar or cement lime mortar.
M&L brick work with Sub class B Bricks in CM 1:4, straight or curved on plan exc 6m mean radius.
M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4.
M&L for Walling of random rubble, uncoursed, built in cement mortar 1:6 all as specified and directed by Engineer-in-Charge.
All as per item above but except stone all as specified and directed by Engineer- in-Charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.
Demolition of reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).
M&L Reinforced cement concrete Type B1 1:2:4 (using 20 mm graded aggregate, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.
M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.
Plain cement concrete bed 1:3:6 type C-2 using 40mm graded stone aggregate to drain pipes of 150mm bore including packing under hunching against the site of pipe after they are laid and tested.
M&L Conventional 10 users., On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and directed by Engineer-in-Charge.
Soakage well of size 1.8 M dia X 3.0 M effective depth Excavation in ordinary soiul, fdn in PCC 1:2:4, bk wk in CM 1:4, RCC slab cover inc RCC precast man hole cover having 6 mm plate embeded alraround/fibre reinf covered with angle iron frame vent shaft in sludge chamber etc.
Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.
Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for 3 pin 5A socket outlet on the same board controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.0 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 2.5 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.
Supply & fixing Switch Modular type 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
Supply & fixing socket outlet 2 in 1, 5 and 6 Amp Modular type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips.
Supply & fixing Switch socket combination 2 in 1, 5 and 6 Amp Modular type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips.
Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp Modular type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips.
Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips.
S&F rectangular boards/ blocks 30x25x4cm depth closed recessed, wooden pattern, complete all as specified and as directed by Engr-in -charge.
House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay, complete all as specified. Make: Havels/Anchor/Polycab/SSK.
Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor.
S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. Make - Anchor/SSK/Cona Havells.
Supply and fix LED Bulb 9 Watt. Make Havells/Bajaj.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
Supply & Fixing RCBO, Double pole and neutral (SPN) 100mA, 240V, 6-63 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
Supply and fixing MCB SPN 32-63 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing MCB TPN 40-100 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning
S&F Three phase Voltage and current protection relay of protection from over current as well as over voltage and auto adjustable complete with connecting testing and commissioning. All as specified and directed by Engr-in-Charge
S&F Single phase Voltage protection relay of trip setting 85 to 500 V AC complete with connecting testing and commissioning. All as specified and directed by Engr-in-Charge.
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Supply laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts graded standard aluminium conductor of size 35 sq mm 4 core complete all as specified and directed. Make Havells/Polycab/Gloster
Supply laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts graded standard aluminium conductor of size 16 sq mm 4 core complete all as specified and directed. Make Havells/Polycab/Gloster
M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping, with wooden or white colour casing caping (as specified and directed) 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed conealed/ surface including taking down old unserviceable submain wiring and making good disturbe surface complete all as specified and directed.Make of cable- Havells ,Plaza, Policab.Make of Casing Caping - Poly plast/ pressfit/ Presto plast.
S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one fore core cable flat of circular of size 16 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.
S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 16 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.
S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 25 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.
Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron earth lead strip 32x6mm by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earthing pit and cover 55mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) common salt, charcoal and testing on completion, all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron earth lead strip 32x6mm by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earthing pit and cover 55mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) common salt, charcoal and testing on completion, all as specified and directed.
S & F in repair PTMT nipple 20 mm suitable for HDPE water tank, (Minimum weight 15mm 38gms/20mm-45gms /25mm- 65gms)
Supply and Fixing of Outdoor 8 way SP Distribution Box, with 01 Nos of 100A TPN MCB and 01 Nos of three phase Voltage Protection Relay 100A with digital display and adjustable trip settings, Make : Selec/ Eurocontrols
M/S GHULAM AHMAD BABA
M/S AB AHAD RATHER
Bidder Name
M/S AB AHAD RATHER
M/S AB HAMID GEELANI
M/S GHULAM AHMAD BABA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .