REPAIR, REPLACEMENT AND MAINTENANCE STREET LIGHTS, FITTINGS, POLES, CABLE AND CONNECTED ITEMS AT AOP AREA AND ARTY CENTRE UNDER GE NASIK ROAD CAMP.

Amount

Receiving complaints from JE incharge lodged by the user/occupants of security/ street light / concern external electric supply nature, rectification of the fault as per the detailed by JE incharge/ AGE E/M to rectify the fault with regard to complaint lodged and refixing of fitting and fixture to their original position as dismentled complete all as directed at site to the entire satisfaction of Engineer -in- Charge. Note : (i) Any copmplaint which is left out/unattendent 1-2 days by the electrician by any reasons the same to be communicated to the JE incharge /AGE E/M with reason. (ii) New material/stores provided for completing the job shall be measured and paid for separetely under relevent items of sch 'A'. (iii) Contractor shall provide the all type of T & P to each electrician for attending the external electric complaints. (iv) Contractor shall provide the complaint register and complaint slip serially numbered in duplicate as per sample. The rate of such items included in this items. (v) Any unattended complaints not done in specified time limit. The contractor shall penalty Rs. 200/- on each complaints per day.

Supply only Energy efficient LED Street / Roadway with PDC housing luminaire, high PF, 45W, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, clear toughned glass, IP 66 protection, 240Volts, 120 lumens/watt, colour temp. 6500K complete all as specified and directed.

Supply only LED outdoor drivers, suitable for 36-45 watt street light fitting all as specified and directed by Engineer-in-Charge.

Supply only LED outdoor drivers, suitable for 50-80 watt street light fitting all as specified and directed by Engineer-in-Charge.

Supply only LED outdoor drivers, suitable for 90-150 watt street/flood light fitting all as specified and directed by Engineer-in-Charge.

Supply only LED outdoor drivers, suitable for 160-200 watt flood light fitting all as specified and directed by Engineer-in-Charge.

Supply only Energy efficient LED Street / Roadway with PDC housing luminaire, high PF, 70W, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, clear toughned glass, IP 66 protection, 4KV inbuilt surge protection, 240 Volts, 120 lumens/watt, colour temp. 5700K complete all as specified and directed.

Supply only AlphaRex3 digital time switches D-22, multifunctional digital time switches all as specified and directed by Engineer-in-Charge.

Supply only power contactors ML-3, 3 pole rating not less than 40 Amp, 230 coil complete as specified and directed by Enginner-in-Charge.

Supply only timelite distribution board digital time switch 32 Amp, 3 pole 230 volts complete including Contactor and Digital type time switch.

Supply only Energy efficient LED Flood light Luminaire, high PF, 100W, energy saving and environmental friendly long life versatile pressure die cast housing IP 66 protection, 240Volts, bracket of adequate size complete including testing & commissioning.

Supply only Decorative LED post top lantern, high PF, 40 Watt, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, 360 degree indirect light, optimum light output, IP 65 protection, glare-free and better uniformty, 240 Volts of 40W LED complete all as specified and directed.

Supply only brackets made out of 40mm bore GI pipe, medium grede, 1.5M long, bend to shape and including suitable MS clamps made out of 40 x 6mm flat iron, necessary bolts, nuts, washers etc complete and painting the bracket and clamps with 2 coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer all as specified and directed.

Supply only PVC weather proof, hinged door, junction box of size 250mm x 200mm x 100mm with 240Volts, Neutral link and 1No MCB SP of 6 Amps, necessary fixing arrangement such as clamps, nut, bolts, etc. complete all as specified and directed.

Supply only flood light maximum 180W LED, minimum system lumen output of 22000 lm. The luminnare should have colour temperature of 5700/ 6500K and THD<10% CRI> 70. The luminaire shall meet IP66 ingress protection and impact resistance of IK07 and luminaire housing should made of pressure die-cast aluminium and itegrated PC Lens. The luminaire should have the features of high voltage 10 kV external surge protection long life, integrated potted LED driver offers comfortable softlight, high durability, driver safety requirement standards as per IS 15885-2 -13.

Supply only LED bush light of capacity 12 watt, 240 volts with die cast aluminium housing with toughned glass, IP-66 complete all as specified and directed.

Supply only LED aviation light fitting with comprising of aluminium housing with polycarbonate enclosure, IP 66 protection complete all as specified and directed.

Supply only Solar LED security light of capacity 50 watt, integrated all in one type inbuilt solar charge controller, solar PV module, LiFe PO4 battery and mounting clamps as a ready installation having following specifications:- - SEC/MNRE tested approved PV panel and battery. - Operating voltage : 12.8V DC. - Battery type: 12.8V 30 Ah Lithium Ferro Phosphate (Li-FePO4) BIS certified. - System wattage 12.8V, 50 Watt LED luminaire integrated with street light made of aluminium extrusion and CRCA powder coated sheet with inbuilt charge controller. - Lumen efficacy : Not less than 120 lm/watt. - CCT : 5400K - 6000K. - CRI : Polycarbonate lenses LED. - PV module : Mono-crystalline 100Wp PV module under STC equivalent MNRE/SEC tested. - Mounting bracket : included. - Dimming level : PIR motion sensor based dimming - 100% once motion detected and rest time operate at 30 % load. - PIR motion sensor : Inbuilt. - Duty cycle : After dusk ON 12 hrs/day as per dimming level. - Automony : 1 day as per duty cycle per day at battery full charge STC condition. - Protection : Overcharge, Deep discharge, reverse polarity, overload.

Supply and fixing in replacement of LED Tri-colour light column 3 mtr height with die-cast aluminium housing with cylindrical opal polycarbonate diffuser designed for rugged outdoor usage and IP 65 protection with Tricolour and tratic white output switch Cat part No BLSLC 50W LED TRI 3M of Bajaj/ Havells/ Crompton complete including PCC work 1:2:4 of adequate size for installed of bollard fitting complete all as specified and directed by Engr in Charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

Supply, fixing and laying in replacement of in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 2 core 6 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire and overall sheathed including cable gland, lugs, jointing material etc, jointing, connecting, testing and commissioning all as specified and directed.

All as per Ser item No 23 here in before but 2 Core 10 Sqmm.

All as per Ser item No 23 here in before but 4 Core 16 Sqmm.

All as per Ser item No 23 here in before but 4 Core 25 Sqmm.

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.

Supply, fixing, install and testing in replacement of 7 mtr height, top outer dia 105 mm, bottom outer dia 215 mm, translucent conical pole glass fibre reinforced with polymer matrix combination of fibre glass and resin making it a strong having a highest technology has filament winding by using CNC method, glass content of 65 to 70 %, specific gravity 1.42g/CC, die-electric strength 40 KV/mm, tensile strength 225Mpa, water absorption 0.3% flexural strength 269mpa, Izod impact strength of 80 k/Jm², barcol hardness of 45 BHU, Tensile module of 9000Mpa, Surface resistivity of 1.6x1016Ω, tensile modules of elasticity 22918 N/mm² complete including shockproof, maintenance free, Non conductive, light in weight, wind speed sustainability is 150 KM/H, base plate is made in GFRP material with customized LOGO and LED strips (LED strip colour specified by Engineer in Charge) complete all as specified and directed. Note : Rate for LED strips, RCC foundation as per drawing provided by OEM, Excavation, returning filling, 7mtr pole, decorative arm 1 mtr long, junction box, foundation bolts and nuts included in this item rate.

Demolition of PCC of any description above/below ground level exceeding 15cm complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of machine pressed precast interlocking paver block any size and shape of 80 mm thickness M-40 grade confirming to IS: 15658-2006 with grey cement and pigment and vibrated with mechanical vibrator, with 30mm thick crushed sand for cushioning all as directed. Note :- (i) Rate include for dismantling of existing interlocking paver block including PCC work.

M&L for PCC 1:2:4 type C1 using 20mm graded aggregate for coping including necessary form work and fair finishing of exposed surface of concrete all as specified and directed.

M&L for rent charges for deploying mini-truck mounted aerial work platforms with following specifications:- (i) Platform : 200 Kg basket capacity. (ii) Type of boom : Articulated boom. (iii) Working : 11 mtr height. (iv) Engine start - stop function from the zero tail swi. (v) Minimum lane occupancy for traffice during operations. Note:- (a) Contractor should deployed 01 x Driver cum operator for operations. Rate included in this item rate. (b) Contractor should be arranged the vehicle within two days after requiremnt order received from JE E/M / AGE E/M. (c) Penalty of Rs. 4,000/- per day should be paid by Contractor for late arrangement of vehicle.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 88625.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Rama Electricals (BID ID -3356276)

LOKMANYA ENTERPRISES (BID ID -3355344)

M/S YASH ELECTRICAL (BID ID -3354844)

metro electrical services (BID ID -3355390)

MAHIMA CONSTRUCTION (BID ID -3349163)

sapana enterprises (BID ID -3356638)

Shree Sai Samarth Enterprises (BID ID -3356320)