REPAIR /REPLACEMENT OF ROOF, FLOORING, JOINERY AND CERTAIN B/R WORKS OF BHIM LINE IN RA AT CAD PULGAON

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

M&L for 6 mm thick asbestos cement corrugated sheet in roofs, walls, etc fixed with L type or J type or cranked hook bolts complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in ridge/flusing board of width or girth not less than 610mm complete all as specified and as directed.

S&F for Rolled mild steel work in main and cross beams, hip and jack rafters, purlin where commected to common rafter and similar work complete all as specified and as directed.

Supply & Fixing mild steel work as in small articles such as Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Dismantling of timber scantlings 40 sq cm and over in section in any position, unframed work complete all as specified and as directed.

Dismantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed works complete all as specified and as directed.

Taking down chowkats or frames with shutters n,exc 1.50Sqm (without taking off shutters from the frames) complete all as specified and as directed.

All as per item No 9.00 but exc 1.50 Sqm but n,exc 4 Sqm each.

Taking down shutters exc 1 Sqm and n,exc 2 Sqm each complete all as specified and as directed.

All as per item No 11.00 hereinbefore but not exc 1 Sqm each

S&F for second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned complete all as specified and as directed.

Supply and fixing 35mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS : 1003 (Pt I) kiln seasoned and chemically pressured treated complete all as specified and as directed.

S&F 35mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply & Fixing 30 mm thick factory made glazed skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified and as directed.

S&F in repairs block boards grade 2 quality 18/19mm thick interior grade with decorative face both side, fixed with screw to timber frame work for cupboard shutter, shelf etc complete all as specified and as directed.

S&F continuous (piano) hinges mild steel, bright finish or electro galvanised width of flaps 30mm ( when open) complete all as specified and as directed.

S&F 100 mm Hasp and stable, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and as directed.

S & F solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for MS butt hinges 100mm size, medium weight cold rolled mild steel, and fixed complete all as specified and as directed.

Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and as directed.

Supply & Fixing 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

Supply & Fixing 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed.

S&F 125mm size of aluminum handles, cast type anodised complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F MS flat iron hold fasts fixed to chowkats confirming to Fe-310-O etc, complete all as specified and as directed.

M & L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in hold fast block, including form work complete all as specified and as directed.

M & L for Preparation of new steel surfaces over 10cm width or girth and priming with red oxide primer and painting with synthetic enamel painting two coats complete all as specified and as directed.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

All as per item No 34.00 hereinbefore but fixed in repairs.

S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n,exc 0.50 Sqm in each pane complete all as specified and as directed.

M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc, complete all as specified and as directed.

Taking down cement plaster on brick walls etc, incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement (External surfaces) WPC shall be measured and paid seperately) complete all as specified and as directed.

Material and labour for rendering 10 mm thick in CM 1:6 on external surfaces incl dubbing out avreage 10mm thick in CM 1:4 and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over two coat of wall care putty to achieve smooth surface complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of white cement primer complete all as specified and as directed.

Supply only approved integral water proofing compound complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) all as specified and as directed including removal of surplus soils/demolished materials not exc 50m and depositing complete all as specified and as directed.

M & L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 75mm PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection fair and smooth without using extra cement complete all as specified and as directed.

M & L for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using exra cement.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed incuding necessary formwork required complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded complete all as specified and as directed.

S & F machine cut cudappah stone slab 20/25mm thick polished one side for kitchen platform over cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl incl rubbing and polishing complete all as specified and as directed .

M&L for 14-16mm thick Green marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as per item No 55.00 here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 complete all as specified and as directed.

S&F for glazed ceramic tiles coloured of size 450x350x7mm thick fixed in verticle surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match incl 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M & L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in bedding layer for tiles flooring finished even and fair complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness, M-50 Grade with grey cement and pigment laid over and including 50mm thick sand cushion, joints of tiles filled with dry sand complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for 8 mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main and cross runner made from 0.33mm thick galvanized steel sheet & of size main T - 24x32mm and cross T - 24x24mm. Main T runner of length 3.6m spaced at 1.2m c/c, cross runner of length 1.2m spaced at 1.2m c/c in between the main runner and cross runner of length 600mm spaced at 600mm c/c in between the runner of length 1.2m, fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 22x22mm of white colour all as per instruction complete all as specified & directed.

Supply & Fixing in repairs decorative curtain rails with fancy brackets of 25mm dia metre stops, rollers etc complete all as specified and as directed

S&F 15mm bore medium grade glavanised tubes with all fittings and fixed complete to walls etc including taking up or down 15mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing complete all as specified and as directed

S&F 20mm bore medium grade glavanised tubes with all fittings and fixed complete to walls etc including taking up or down 20mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing all as directed..

M&L for cutting chases for concealed pipe where required and pointing in cement mortar 1:3 etc, in Brick wall.

S & F in repairs stainless steel sinks with drainage board made of 1mm thick for kitchen with plugs washer, waste pipes, cast iron cantilever brackets, connecting union to pipe of overall size 915mm x 460mm, bowl size 410 x330 x 160mm with glossy finish, including bedding in cement mortar to dwarf wall fixing cantilever brackets and connecting unions to pipe incl 40mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) and waste pipe complete all as specified and as directed.

S&F in repairs CP soap dish approximate size 160x160x90mm complete all as specified and as directed

S&F in repair 15 mm bore dia of Pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and flynuts, scewed for union pipe and fixed to 15mm dia pipe complete all as specified and as directed

S&F in repair 15mm bore dia of stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed

S&F in repair 15mm bore dia of angle valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed

S&F in repairs 15mm bore dia Bib tap chromium plated with crunch or butterfly handle , screwed for iron pipe or for brass pipe and fixed complete all as specified and as directed

S & F in repair 20mm bore gun metal gate valves, with iron wheel head , screwed both ends for iron pipes complete all as specified and as directed

S & F in repair chromium plated shower rose 125mm size complete all as specified and as directed

S & F in repairs for 10 ltr capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets complete all as specified and as directed

S&F in repairs Vitreous china squatting pan, ' Orissa pattern, size 580 x 440mm white, with intergal foot rest (excluding flushing cistern and flush pipe complete all as specified and as directed

S & F in repairs for vitreous china wash basin white flat back, size 580x400mm incl brackets, cutting for and pinning in ends or brackets, incl 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) and waste pipe complete all as specified and as directed

Steel plate rack made of stainless steel fixed with plugs, washers and steel screws including bedding in cement mortar on to dwarf wall, overall size 600mm x 750mm, complete all as specified and as directed

S&F in repairs tubular towel rail aluminium, 20mm dia, D type 60 cm long between flanges complete all as specified and as directed

S&F in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia complete all as specified and as directed

S&F in repairs PVC (SWR) Nahani trap plain with grating incl jointing with solvent cement of 75mm dia complete all as specified and as directed

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches complete all as specified and as directed

All as per item No 83.00 but of 75mm bore

S&F in repair PVC (SWR) bends any radius of 75mm bore

All as per item No 85.00 but of 110mm bore

S&F in repairs CP grating 110mm complete all as specified and as directed

S & F rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 500 liters capacity confiring to IS specification, incl 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms), and Dismantling PVC/cement water tank n.exc 500 ltrs capacity complete all as specified and as directed

C P Singh and Co

3Krishna Enterprises

M/s Chadha Brothers

M/s Rahul Kumar Agrawal

M/S SHRINATH CONTRACTION

8M/S TIWARI and SONS

Bidder Name

3Krishna Enterprises

Attar Singh and Sons

C P Singh and Co

8M/S TIWARI and SONS

M/S SHRINATH CONTRACTION

M/s Rahul Kumar Agrawal

M/s Chadha Brothers