MISC REPAIR TO PLUMBING, JOINERY, TILING, BRICK WORK, STONE WORK ETC AT RESIDENTION AREA AND REPAIR TO DRAINAGE , DRAIN COVER IN VARIOUS LAB AT KWC AREA UNDER GE I RND DELHI

Amount

S&F in repair PVC connection 15mm dia 45cm long with 2 Nos PTMT checknuts with washer complete all as specified and directed.

S&F in repair 15 mm dia PVC bib tap standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and directed.

S&F in repairs 15 mm dia bib tap cast copper alloy fancy type chromium plated long body with crutch or butterfly handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated pillar tap fancy type with fly nut capstan head screwed complete all as specified and directed.

S&F in repairs 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required including making good to match with existing complete all as specified and directed.

S&F in repairs 15 mm dia angle valve chromium plated brass complete all as specified and directed.

S&F in repairs 15mm dia ball valve high pressure of PTMT complete with aluminum rod with polyplast ball complete all as specified and directed.

All as per item No 7.00 above but 20mm dia.

S&F in repair 32 mm dia waste fittings brass chromium plated. complete all as specified and directed.

All as per Item No 09.00 above but 40mm dia.

S&F in repair 32mm dia PVC waste pipe for WHB 600mm long with union complete all as specified and directed.

All as per Item No 11.00 above but 40mm dia.

S&F in repair 10 ltrs capacity PVC low level flushing cistern syphonic action type, white, with inlet ball valve, float and handle including brackets and connecting to WC and fixing on walls with bracket complete all as specified and directed.

S&F in repair CP jet spray with tube for single symphonic EWC complete all as specified and directed.

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm excluding CI/MS brackets complete all as specified and directed.

S&F in repair CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as specified and directed.

S&F in repair CP grating 125 mm dia round fix on floor / nahani trap fixed with cement mortar complete all as specified and directed.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed.

S&F in repair vitreous china water closet Indian type 580 mm long pan white with 'P' or 'S' trap front or back inlet footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe etc complete all as specified and directed

M&L for Easing of door/windows shutters(without taking off) not exceeding 1 Sqm of panels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of tower bolts. Sliding bolts etc complete all as specified and directed.

All as per item No 21.00 above but exceeding 1 Sqm and not exceeding 2 Sqm.

S&F in repairs 300 mm long aluminum alloy anodised sliding door bolt (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

M&L in repairs aluminium sheeting 0.56 mm thick fixed to wooden shutters with CP screw including cutting to required size complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.

M&L securing glass of any description in existing steel frame with putty including removing of old putty complete all as specified and directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rail of size 600mm long including brackets. complete all as specified and directed.

S&F in repair extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.

S&F in repair 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 100 mm long aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified and directed.

BLANK

M&L for 20mm thick granite ( of any type) tiles machine cut in skirting/dado laid over cement screed and joined with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F In repair 15 mm dia GI steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair GI steel tubing medium grade galvanised 20mm dia with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank triple layered 1000 ltrs capacity hoisted and fixed in position complete all as specified and directed.

Dismanting of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Ist quality non skid coloured tiles 400mm X 400mm X 7mm / 300mm X 300mm X 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Ist quality glazed ceramic tiles 300X200x7mm / 350X250X7mm/450X350X7mm thick coloured tiles in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in dado over and including 15mm thick cement plaster in CM (1:4) complete all as specified and directed.

M&L for Ist quality light shade coloured vitrified tiles (600x600mm size) 10 mm thick (Sqm/ rectangular) polished, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed. Note:- The work shall be executed upto 8th floor. The rates for scaffolding is deemed to be included in quoted rates.

All as per item No 40.00 above but exc. 0.50 sqm.

S&F in repair 5.5mm thick sheet glass of any colour, ordinary quality and glazing with snap beading and gasket etc. for aluminium door & window exc .0.5 Sqm in each pane complete all as specified and directed. Note:- The work shall be executed upto 8th floor. The rates for scaffolding is deemed to be included in quoted rates.

M&L for racking out old joints of roof tiles including flush pointing in cement mortar (1:3) upto depth of 20 mm complete including cutting removing vegetation complete all as specified and directed.

M&L welding in repairs (thickness of metal to be welded n exc 06 mm) in any situation and in any floor complete all as specified and directed.

S&F in repair rolling shutters thickness laths in 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp abd staple and erected in postion as indicated and of applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.

M&L two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth complete all as specified and directed.

S&F in repair mortice lock, verticle type of brass size 100mm and 4 levers complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick in CM (1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered inner wall surfaces and applying two coats of oil bound Distemper over 2mm thick (1mm thick each coat ) wall care putty complete all as specified and directed.

Taking down wooden, mild steel, Aluminium chowkhats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

All as per item No 52.00 above but area n.exc 1.5 Sqm

S&F 50 micron thick podwer coated aluminium grill 6x 45mm thick section 10cm center to center spacing complete with U-channel alround fixed in windows with screws complete all as per specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars including frame , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 Nos.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified Note:- Glass shall be measured and paid separately.

S&F 4.8mm thick sheet glass ordinary quality in Square/rectangle exc 0.5 sqm each pane and fixed with glazing pins and rubber beading etc complete all as specified and directed.

S&F 30mm thick wooden flush shutters solid core construction with block board core and plywood face panels commercial type on both sides. complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed.

S&F MS Butt hinges medium weight of size 100 mm. complete all as specified and directed.

M&L for preparation of newly wooden surfaces and applying two coats synthetic enamel paint over a coat of pink primer. complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed fixing complete Note:- The work shall be executed upto 8th floor. The rates for scaffolding is deemed to be included in puted rates.

S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. Note:- The work shall be executed upto 8th floor. The rates for scaffolding is deemed to be included in puted rates.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for cleaning and greasing the sides of the rolling shutter of size n. exc 25 Sqm each as well as other moving parts, like spring,roller, wheel etc made shutter fully easy functional complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as per specification and drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick( style), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified shown on drawing and as directed.

S&F 150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 100 mm long Butt hinges, extruded aluminium alloy, type B-21 with galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed.

S&F in repair curtain rod 20 mm dia fancy type mild steel chromium plated with brackets complete all as specified and directed

Removing Debris/ demolished materials to a distance exc 1.5 Km but n exc 5 KM outside MOD Land complete all as specified and directed.

Demoltion of cement concrete in ground floor and paving n exc 15cm thickness (below or above ground level complete all as specified and directed.

M&L for providing PCC 1:3:6 type C-1 (20mm graded stone aggregate) as in coping, lintels, cills, steps, seismic and other similar bands, plinth courses, string courses, bed plates kerbs , etc complete all as specified & directed

S&F Factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement as per IS 12592 : 2002 with specified thickness including removal of old drain covers complete all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

All as per item No 80.00 above but except bricks.

M&L for rendering 15mm thick in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparing newly steel surfaces over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundations, filling and mass concrete/Subbase complete all as specified and directed.

M&L for Prepainted machine pressed chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors using with grey cement and pigment, over & including 20mm thick CM 1:6, complete all as specified and directed.

Demolition of reinforced cement concrete as in RCC slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, man hole cover ,drain covers ,Shelves etc and like complete all as specified and as directed.

M&L for TMT bars of 10mm dia and over, cut to lenghth bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick complete all as specified and directed.

Dismantling of paver blocks/stone slab of any thickness and in any position laid dry complete all as specified and directed..

Dismantling of paver blocks/stone slab of any thickness and in any position laid bedded and pointed in any type of mortar complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size wih grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over and including 40 mm thick compacted sand over sub base complete all as specefied and directed.

M&L for Dholpur stone cladding16-18 mm thick gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatmet including 10 mm thick rendering in CM 1:4 to receive the stone complete all as specified and directed.

Sree Ram Enterprises

V.V CONSTRUCTIONS