Construction of MGH, CISF office, vehicle parking shed, masonry wall, chain link fencing, watch tower post, road etc., for KKNPP 1to6 units NPCIL/KK5and6/CONST/CIVIL INFRA/PT/2024/170

Amount

Area Cleaning Works

Clearing grass along with small bushes if any and removal of the rubbish up to a lead of 2 Km outside the periphery of the area cleared, including the cost of tools, tackles, men material etc., complete as per drawings and specifications

Clearing jungle including uprooting of rank vegetation, grass bush wood trees and saplings up to 30 cm girth and removal of rubbish up to a lead of 2 km outside the periphery of area cleared as per drawings and specifications

EARTHWORK

Anti-Termite Treatment works.

Providing Pre-construction antitermite treatment using chlorpyriphos emulsifiable concentrate 20 % with 1 % concentration as per specifications. (Plinth area of the building at ground floor only shall be measured for payment) Note: The contractor shall furnish from the agency carrying out this work under this item a written guarantee in favour of NPCIL for the satisfactory performance of the treatment for a period of ten years.

CONCRETE WORK

Providing and laying plain cement concrete 1:4:8 using 40 mm and down graded stone aggregate at all height including mechanical mixing, leveling, compaction, vibrating, finishing smooth the exposed surfaces of concrete, curing etc complete as per drawings and standard specifications.

Providing and laying M20/M25 Design mix concrete with cement content up to 350kg/Cum using 20mm and down graded stone aggregates including Mixing ,Ramming, Compaction, leveling, curing, placing at all lifts, including scaffolding and Finishing smooth all exposed faces complete as per specification.

Providing and laying cement concrete 1:2:4 using 20mm down approved size graded stone aggregate, thick for window sills, coping/grade slab/encasing etc, including consolidation scaffolding, curing, shuttering, et. Finishing smooth the exposed face of concrete.

Reinforcement & St.steel work

Providing cutting ,bending placing and tying mild steel, high yield steel reinforcement in RCC works including providing spacer blocks in CM 1:2, binding wires etc.complete at all elevations as per drawings and specifications including dewatering wherever necessary etc complete as per drawings and specifications

Providing, fabricating and erection of Structural steel members made out of M.S. angles, flats, plates, pipes, channels, tubes, rods etc conforming to relevant IS etc., including cost of welding, welding rods, drilling holes, bolts/nuts wherever required and providing and applying two or more coats of approved quality synthetic enamel paint over a coat of zinc chromate yellow primer etc., as per drawings and specifications

Providing and Fixing FRP Sheet of approved make of 1.5mm thick for roofing at all elevations including mitering, Supplying & Fixing with necessary 6mm dia J or L GI bolts, nuts & bitumen washers as per manufacturers specification and as per drawings and specifications. (Note: Payment shall be made only to the superficial area. No over laps, corrugations /profile shall be measured)

Form Work

Providing ,placing in position and removing Form work for all insitu concrete works including scaffolding etc., complete at all elevations as per drawing and specification (measurement for form work shall be the area of forms in contact with concrete surfaces)

Design Mix Reinforced Cement concrete

Providing and laying M30 Design mix concrete with cement content up to 350kg/Cum using 20mm and down graded stone aggregates, admixtures including Mixing ,Ramming, Compaction, leveling, curing, placing at all lifts, including scaffolding and Finishing smooth all exposed faces complete as per specification., (The rate shall be exclusive of reinforcement and form work) Note: The Rate shall be quoted on the basis of use of 350 Kg of cement per Cu.m of concrete. Any downward / upward variation will be deducted / paid as per relevant item.

Adjustment of cement used less/more than the specified quantity

Providing, casting, finishing, curing, hoisting and placing in position 75mm thick precast slabs in cement concrete 1:2:4 using 20mm down size stone aggregate excluding cost of reinforcement but including formwork all complete as per drawings and specifications (The rate shall be exclusive of reinforcement)

Solid Block Masonry works

Providing and constructing cement concrete block masonry of minimum M5 grade conforming to IS-2185 of latest version , using solid blocks of specified size (400mmx200mmx200mm) , in cement mortar 1:4 by volume, for walls below plinth and locations including racking out joints, curing etc complete as per specification

Providing and constructing cement concrete block masonry of minimum M5 grade conforming to IS-2185 of latest version , using solid blocks of specified size (400mmx200mmx200mm) , in cement mortar 1:4 by volume, for walls in super structure for all locations and elevations including scaffolding, racking out joints, curing etc complete as per drawings and specifications

Providing and constructing 100mm thick cement concrete block masonry of minimum M5 grade conforming to IS-2185 of latest version , using solid blocks of specified size (400mmx200mmx100mm) , in cement mortar 1:4 by volume, including providing 40mm thick Cement Concrete 1:2:4 at every third layer, for partition walls at all elevations and locations including scaffolding, racking out joints, curing etc complete as per specifications and drawing

Providing and constructing Random Rubble masonry in CM 1:6 using hard granite stones including hammer dressing the stones, providing bond stones as per specifications ,raking out the joints, scaffolding, curing etc., complete as per specifications.

In superstructure above plinth at all elevations.

Plastering

Providing cement plaster for the ceiling with 6 mm thick in cement mortar 1:3 at all elevations including hacking and preparing the surface, scaffolding, finishing, curing etc all complete as per drawings and specifications

Providing cement plaster for the internal faces of brickwork / concrete at all elevations in cement mortar 1:5, 12mm thick, finished smooth with a floating coat of neat cement including scaffolding, finishing, curing, forming grooves wherever necessary all complete as per drawings and specifications

Plastering of external faces of brick work/concrete at all elevations in cement mortar 1:4, 20 mm thick including scaffolding, curing, forming grooves, plaster bands, border, keystone etc wherever required all as per drawings and specifications

Providing and Fixing in position 24 guage G.I. Chicken mesh of 150 mm wide in between the junction of column/beams with masonry by placing the mesh with nailing etc before at all elevations etc complete as per drawings and specifications

Painting

Providing and applying white washing three or more coats with cem powder on plastered surfaces, ceiling to give an even shade including cost of gum and ultramarine blue and curing , scaffolding thoroughly brooming the surface to remove all dirt, mortar drops and other foreign matters etc., complete. and as per drawings and specifications

Providing and applying Acrylic Emulsion paint of Asian paints (Premium Emulsion)/Lewis Berger (Rangoli) /ICI Dulux (Super smooth)/Matex gold of Nippon/Nerolac make of approved shade in two or more coats over a coat of primer including preparation of surface with required coats of putty using Birla/ JK make, sand papering etc., to get good finish at all elevations etc all as per as per drawings and specifications

Providing and applying Exterior Emulsion Paint of Apex of Asian paints/Weather cote of Lewis Berger /Weather shield of ICI Dulux/Sumo Xtra of Nippon/Nerolac make & shade in two or more coats to give an even shade over a coat of primer as per manufacturer's instructions to the external plastered surfaces including preparation of surfaces, scaffolding etc. at all elevations, complete as per drawings and specifications

Flooring

Providing and Fixing in position vitrified(Salt spray light) floor/skirting tiles of JOHNSON/ SOMANY/ REGENCY/NITCO/BELL/ KAJARIA/AGL/CERA/SIMPOLA/HSIL/VERMORA/BONZER7/PAVIT make of size not less than 600x600 mm, thickness not less than 8mm of approved colours as per the design including setting in cement mortar 1:4, 20 mm thick base layer, pointing the joints neatly with white cement with pigment to match with tiles, all as per drawings and specifications

Providing and Fixing in position ceramic glazed wall tiles of size as specified below (thickness to be specified by the manufacturer) of premium quality confirming to IS-15622 of JOHNSON/ SOMANY/ REGENCY/NITCO/BELL/ KAJARIA/AGL/CERA/SIMPOLA/HSIL/VERMORA/BONZER7 make laid on 20mm thick Cement Mortar 1:3(1 Cement : 3 Coarse Sand) and jointing with grey cement slurry @3.3kg/Sqm including pointing the joint with white cement mixed with colour pigment of matching shade complete at all floors, all as per drawings and specifications

Size 200 x 300 mm

Providing and Fixing in position Anti-Skid ceramic floor tiles of approved sizes (thickness to be specified by the manufacturer) of premium quality confirming to IS-15622 of JOHNSON/ SOMANY/ REGENCY/NITCO/BELL/KAJARIA/AGL/CERA/SIMPOLA/HSIL/VERMORA/BONZER7/PAVIT make, in all colours and shades laid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) including pointing the joint with white cement and matching colour pigment etc at all floors complete all as per drawings and specifications

Providing and laying 20mm thick (+-2mm) polished Natural granite slab of approved colour as below, for platform/flooring/wall cladding and other surfaces as directed with all exposed surfaces buffed, making half/full round nosing, set over a base of cement mortar 1:4, 20 mm thick neatly pointed with white cement and colouring pigments to match the shade of the stone as per the requirement, curing, rubbing, polishing, etc complete as per drawings and specifications

Granite Slab : Galaxy

False ceiling work

Supplying & Fixing in position suspended Calcium Silicate board False ceiling and side cladding with anodised aluminium frame work using anodised aluminium sections, with adjustable GI rods, holding cleats grid work suitably modified along the walls and beams, fixed with anchor bolts, making extra frame work around the Air conditioning and electrical fixtures and fittings fixed with necessary clips etc. complete as per specifications.

Doors and Windows

Providing and Fixing Powder coated (50 micron black or bronze) Aluminium doors, hinged / sliding windows & ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 powder coated to the required shade, fixed with rawl plugs and screws or with Fixing clips or with expansion hold fasteners including filling up of gap at junctions, at top, at bottom and sides with required PVC / Neoprene felt etc, aluminium sections are smooth rust free, straight, mitered and jointed mechanically wherever required, sections are prepared to receive the glass or particle board of specified thickness, including aluminium snap beading, CP brass / stainless steel screws, providing and Fixing all powder coated fixtures and fittings all complete as per drawings and specifications

Supply and Fixing of Both side laminated Board of 12 mm thick IS make of approved colour as specified for the existing damaged door shutters, cost inclusive of opening the joints and Fixing the new board and re-Fixing the shutter in original position with necessary tools, tackles, men, material etc., complete (only clear area will be measured)

Providing and Fixing frosted 4mm thick glazing, Modi guard/Saint Gobain/Hindustan/ Borosil/Asahi India/La Opala RG Ltd make for aluminium windows and ventilator shutters fixed glazing, with PVC/neoprene gasket, aluminium snap beading etc. all complete as per drawings and specifications (Cost of aluminium snap beadings will be paid in Aluminium item).

Providing and Fixing factory made UPVC white colour casement/sliding window using extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for Fixing hardware and drainage of water etc., making arrangement for Fixing of hardware, EPDM gasket, 1.2 ± 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners and other fixturs etc all complete as per drawings and manufacturers specifications

UPVC Sliding window glazed with 5mm thick glass shutter and Aluminium mosquito mesh shutter

Providing and Fixing in position over doors and windows approved make MS powder coated curtain rods of 25mm dia of approved colour including providing necessary decorative end fittings and wherever necessary intermediated support to be provided if width is more including providing required nos. of curtain hanging PVC hooks, necessary screws rawl plugs etc complete as per drawings and specifications

Supply

Fixing

Providing and Fixing heavy duty hydraulic door closers of SHUTWELL/OPEL/KBD/KADSON/CORE/DORSET/GAZE/OZONE/ARCHIS/DYNA/EVEREST makes confirming to IS 3564 for doors including the cost of required tools, labour etc complete as per specifications

Supply

Fixing

Supplying and Fixing Mortice lock 4 levers of Godrej/ Doorset/ Yale/ Ozone/Milano/Atom/Spider/IPSA makes with all fittings and fixtures etc., complete

Supply

Fixing

Providing and Fixing sun control polyester film of Modi/Garware/3M make for the glazed surfaces as per drawings and specifications

Providing and Fixing semi unitized structural glazing fixed / openable (glazing visible from exterior surface) using 6mm thick heat strengthened reflective type glass of Modi guard/Saint Gobain/Hindustan/Borosil/Asahi India/La Opala RG Ltd/AIS make and approved shades with frame work using extruded anodized Aluminium section (20 micron) of approved shade with sub frame system using JINDAL / INDAL / HINDALCO make of approved size, including making necessary opening arrangement in the openable area , Fixing the Aluminium grid work in to the masonry / RCC with necessary fastening materials such as SS brackets, Anchor fasteners, cleats, nuts, bolts, rivets, washers, including fixtures required for Fixing glass such as double side adhesive tape, silicon sealant (Dowcorning), weather strip, weather sealant etc., at all elevations with necessary scaffolding arrangements etc all as per drawings and specifications :: Note: (i) The contractor shall submit the design for aluminium grid work for structural glazing with parameters such as wind pressure 200kg/ M2, necessary seismic loads as per relevant code of practices. Weight of Aluminium grid work shall not be less than 7.5kg/Sq. Meter with arrangements for arresting rain water and the same shall be approved by Engineer in charge before taking up the work. (ii) The rate is inclusive of design; preparation of supporting drawings, all material, labour, scaffolding etc., the measurement will be paid as per the finished area.

PVC Doors

Providing and Fixing PVC door frame of size 50 x 47 mm with a wall thickness of 5mm made out of extruded 5 mm rigid foam sheet, mitre cut at two corners and jointed with 2nos of 150mm long brackets of 15 x 15 mm MS square tube in two corners. The two vertical door profile are to be reinforced with 19x19mm phosphated square tube of 19 gauge & hard wood shall be inserted in re square tube. EPDM Rubber gasket weather seal to be provided throughout re-frame, the door frame shall be fixed to the wall by drilling 100 mm long stainless screws through the frame by using PVC fasteners on each side of the verticals, minimum 4 nos of screws to be provided for each vertical member and the Door shutter shall be of 30 mm thick PVC panel door of approved shade and design made out of 5 mm thick C-channels of width 50 mm to form the styles and rails the inner panel shall be of minimum 5 mm thick which is welded/sealed to the style and rails along with 5 x 25 mm PVC beading on all sides and both faces. The shutter frames shall be square M.S. tube of heavy gauge 20 x 20mm on all sides including providing and Fixing fittings and fixture as per relevant IS such as 75mm SS hinges-3 Nos, 75mm Aluminium handle-2 Nos and 100mm aluminium Tower bolt - 2 nos etc complete as per specifications

Roof water proofing and cement Tiles

Providing and making RCC roof mother slab/sunken slab water proof by injection grout with the approved compound of SIKA/BASF/ROFF/FOSROC/ Dr.Fixit/ Bostic India make as per the manufacturers procedure/ specification by providing one water proofing membrane system by brush application as water proofing barrier for both slab and inner face of parapet/side wall including water testing by ponding for minimum 7 days and providing joint guarantee for water tightness for 10 years (This item may be got executed by specialized water proofing agents duly approved by NPCIL and 10 years joint guarantee for water proofing is required to be submitted).

Supply and laying one course of pressed cement tiles 20 mm thick of 250mmX250mm size as per IS:1237 of latest version, laid over the roof slab over a base of 20mm thick CM 1:4 and joints pointed neatly in cement mortar 1:3 mixed with water proofing admixture of approved make etc complete all as per drawings and specifications

SS Handrail

Supply and Fixing in position approved quality Stainless Steel of Grade-312 for handrails/other areas as directed using SS pipes/tubes/balls etc including chasing the walls/floor for Fixing in position and filling the area by cement concrete 1:2:4, finishing with cement plaster in CM 1:4 etc complete as per drawings and specifications

ROAD WORK

Earthwork excavation over areas in all types of soil including dressing to required camber and consolidating with 8 to 10 Ton capacity Power roller etc complete as per drawings and specifications

Rolling, consolidation of Surface and filling the undulation/depression and including consolidation by 8 to 10T capacity Power roller etc complete as per drawings and specifications

Construction of granular sub-base (GSB) by providing close graded Material conforming to specifications conforming to Grade-I (size range 75 mm to 0.075 mm) , mixing in a mechanical mix plant, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness on prepared surface and compacting etc complete as per specifications and directions of Engineer-in-Charge.

Providing, laying, spreading and compacting graded stone aggregate (size range53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge, as per clause 406 of MORT & H specifications complete in all respects.

Providing and laying bituminous concrete 40mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 5.4 to 5.6% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 509 of MORT & H specifications complete in all respects.

Providing and laying Dense graded bituminous macadam 50 mm thick with 100 - 120 THP hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder at 4.0 to 4.5% by weight of total mix and filler, trnsporting the hot mix to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled with smooth wheeled, vibratory and tandom rollers to acheieve the desired compaction as per clause 507 of MORT & H specifications complete in all respects.

Providing and applying prime coat using slow setting bitumen emulsion conforming to IS:8887 on prepared surface of granular base incl;uding clearing the road surface and spraying primer at the rate of 6kg/10sqm, as per clause 502 of MORT & H specifications complete in all respects

Providing and applying tack coat using hot straight run bitumen of grade 80/ 100/VG-10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications (On W.B.M. @ 0.75 Kg / Sq. Meter) etc complete as per drawings and specifications charge.

Providing and applying 2.5mm thick road marking trips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per drawings and specifications

Providing and Fixing reflective road studs of ‘category B’ Raised pavement markers made out of poly carbonate/ABS moulded body and reflective panels(bi-convex reflectors) with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro-reflectance and chromaticity values conforming to ASTMD4280. The reflective raised pavement markers shall also confirm to the MORTH circular no RW/NH.33023/10/97-DOIII dt 11.06.97 and the length ,height and width of the body shall not be less than 100mm,15mm and 90mm and base of marker shall be flat within 1.3mm. The marker shall support a load of 13635Kg tested in accordance with ASTM D4280. Lenses shall be moulded of polycarbonate of methyl methecrylate conforming to ASTM D788. The area of each retro –reflector surface shall be 35+5 degree to base. Each reflector shall have a CIL not less than values specified in table2 of said MoRT &H circular and 2 cylindrical polymer shanks of not less than 20mm diameter and not less than 30mm length shall be provided for better anchorage etc complete as per drawings and specifications

PLINTH PROTECTION

Providing and laying M30 grade 60 mm thick coloured interlocking precast concrete pavers blocks as per relevant IS of approved shape over a profiled layer to the required line, pattern etc., all as per drawings and specifications

Providing and filling /spreading Crusher sand 30mm thick (compacted thickness) for preparation of base to lay interlocking precast concrete paver blocks including, leveling, placing, to the required slope, compacting with roller etc complete as per drawings and specifications. (Payment shall be made only for compacted thickness)

Providing and laying crushed stone aggregate bed of 60mm thick (compacted thickness) for preparation of base to lay interlocking precast concrete paver blocks using 12 mm down graded stone aggregate including, leveling, placing, to the required slope, compacting with roller etc as per drawings and specifications. (Payment shall be made only for compacted thickness)

Fencing

Providing and Fixing chain link fencing to M S Angle posts using PVC coated GI wire chain link fencing 50x50x9 G as per IS-2721 using approved quality GI wire, with 6 mm dia MS rods tied vertically on posts including providing PVC coated 4 mm dia GI wire horizontally at top and bottom, 6mm dia MS rods tied vertically on posts using 16G G.I annealed binding wire etc., complete as per drawings and specifications

Providing and Fixing in position approved quality Anglo Indian type water closet of Hindware/Cera/Nycer/Parryware/Prayag/Johnson/Somany make comprising of (a) Wash down AIWC in white glazed vitreous chinaware with integral "P/S" trap, Fixing in position with the floor by Brass screws, (b) White solid seat cover with CP pillar hinges and rubber buffers etc complete as per drawings and specifications

Supply

Fixing

Providing and Fixing in position best quality vitreous chinaware hand wash basin of 550x400mm size white colour of Hindware/Cera/Nycer/Parryware/Prayag/Johnson/Somany make and Fixing with Rug bolt of approved size and make as per drawings and specifications

Supply

Fixing

Providing and Fixing heavy quality 15mm dia CP brass angle cock as per relevant IS, Adson/Cera/Parryware/ Prayag/ Watgerman/ Asian(ESSESS)/ Hindware/Johnson/Somany make as per drawings and specifications

Supply

Fixing

Providing and Fixing 15 mm size heavy quality CP brass pillar cock easy clean type as per relevant IS for wash basin with capstan head Adson/Cera/Parryware/ Prayag/ Watgerman/ Asian(ESSESS)/ Hindware/Johnson/Somany make as per drawings and specifications

Supply

Fixing

Providing and Fixing heavy quality 15 mm dia, CP brass screw down long bodied bib tap with CP brass flanges as per relevant IS, Adson/Cera/Parryware/ Prayag/ Watgerman/ Asian(ESSESS)/ Hindware/Johnson/Somany make as per drawings and specifications

Supply

Fixing

Providing and Fixing in position approved European type water closet of Hindware/Cera/ Nycer/ Parryware/Prayag/Johnson/Somany make comprising of a) Wash down EWC in white glazed vitreous chinaware with integral "P" of "S" trap with or without vent and jointing the trap with soil pipe in CM 1:1 b) Hindware/Cera/ Nycer/Parryware make PVC 10 liters capacity low level flushing cistern with all syphonic fittings. c) White solid plastic seat cover with CP pillar hinges and rubber buffers etc complete as per drawings and specifications

Supply

Fixing

Providing and Fixing in position white vitreous china flat back lipped front urinal basin of size 430 x260 x 350 mm with integral flushing rim Hindware/Cera/Nycer/Parryware/Prayag/Johnson/Somany, CI concealed brackets including CP brass spreader of Hindware/Cera/Nycer/ Parryware/Prayag/Johnson/Somany make with complete fittings including painting of bracket etc., complete as per drawings and specifications

Supply

Fixing

Providing and Fixing heavy quality PTMT bottle trap as per IS-9763 of Prayag/Polytuf/Wavin Vectus/King pipes/Polo India/Plasto make of self cleaning design for wash basin. - 32 mm nominal bore

Supply

Fixing

Providing and Fixing heavy quality 32mm CP brass waste coupling for Wash basin Adson/Cera/Parryware/Prayag/Watgerman/Asian(ESSESS)/Hindware/Johnson/Somany make with or without overflow with rubber plug ball chain with necessary check nut as per drawings and specifications

Supply

Fixing

Providing and Fixing in position mirror of size 600 x 450mm, made of Indian glass 6mm thick manufactured by Modi guard/Saint Gobain/Hindustan/Borosil/Asahi India/La Opala RG Ltd make factory silvered with PVC backing 4mm thick etc., complete as per drawings and specifications

Supply

Fixing

Supply and Fixing of 15 mm, 1 m length Health faucet of JAQUAR/CRABTREE/KOHLER make and with all necessary accessories etc., complete as per drawings and specifications

Supply

Fixing

Providing, Fixing and testing PVC rain water pipes of 110 mm dia as per IS-13592 of Type A of Prince/Jain/Kitec/Finolex/Supreme /Astral/ Ashirvad make with necessary fittings and fixtures, such as bottom shoe, PVC grating, GI clamps, screws/nails, wooden packing pieces at minimum 1 m spacing, cost inclusive of Fixing the shoes in brick masonry in CM 1:6 and plastering the same with CM 1:4 etc complete all as per drawings and specifications

Supply

Fixing

Providing and laying under floor PVC pipes of Prince/Kitec/Jain/Finolex/Supreme/ Astral/Ashirvad make as per IS-15328 of latest version and required specials for soil, waste pipes etc complete as per drawings and specifications (Earth work excavation will be paid under relevant item).

Supply - 110mm dia

Fixing - 110mm dia

Supply -160 mm dia

Fixing -160 mm dia

Nahani Trap

Providing and Fixing single/multi PVC Nahani trap of self cleaning design with 75 mm dia outlet, Prince/Kitech/Jain/Finolex/Supreme/ Astral/ Ashirvad make as per relevant IS, Stainless steel Grating and including necessary cement concrete 1:2:4 for embedding and making good the floor, connecting the trap to the waste pipe, forming circular hole up to floor level and rendering smooth etc. Complete as per drawings and specifications

Providing and Fixing polyethylene - Aluminium polyethylene (PE-AL-PE) composite pressure pipe UV stabilized with carbon black confirming to IS:15450-2004 for water Supply including providing and Fixing box clamps at 1000mm spacing for external works and laying under floor wherever required and cutting the walls for required depth for concealed installation including cutting charges and making good the walls for internals and providing and Fixing all the required specials/fittings etc wherever required at all elevations including cost of scaffolding etc. complete as per drawings and specifications (Earthwork excavation will be paid under relevant item)

Supply(Pipe with required specials as required) - 20-25mm dia

Fixing - 20-25mm dia

Supply(Pipe with required specials as required) -40-50mm dia

Fixing - 40-50mm dia

Providing and Fixing in position at all elevations PVC pipes of "Prince/Kitec/Jain/Finolex/Supreme/Astral/Ashirvad" make of Type-B conforming to IS 13592 of latest version and specials such as bends, junctions with or without doors, cowls, etc., for soil, waste, vent or anti-syphonage pipes & for under floors etc with necessary clamps and wooden packing pieces at minimum 1 m spacing etc complete as per drawings and specifications

Supply - 110 mm

Fixing - 110 mm

Supply -75 mm

Fixing - 75mm

Supply - 50mm

Fixing - 50mm

Providing and placing on terrace (at all floor levels) polyethene water Storage Tanks capacity as required of Sintex/Aquatec/Supreme Industrie/Penguin Tank Industries/Vectus Industries make with cover and suitable locking arrangements and making holes for inlet, outlet, scour and overflow pipes as per drawings and specifications

Providing and laying non-pressure RCC pipes with collars of dia & classes mentioned below, joined with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing the joints etc complete.

RCC Pipes with Collars - 300mm dia - NP2

RCC Pipes with Collars - 600mm dia - NP2

Providing and Fixing in position Hindware/Cera/Nycer/Parryware/Prayag/Johnson/Somany make of Urinal division plate of 700x340x120mm size as per manufacturers specification and as per drawings and specifications

Supply

Fixing

Providing and Fixing of 600 mm x 20 mm CP brass towel rod of Adson/Cera/Parryware/ Prayag/ Watgerman/Asian(ESSESS)/ Hindware/Johnson/Somany make, with a pair of CP brass brackets and wall flanges fixed to wall with CP brass screws screwed on to wooden plugs embedded in wall etc., complete as per drawings and specifications

Supply

Fixing

Earthing Works

Providing and installation of 40 mm dia MS rod - 3 mtr long, directly driven into earth, the hole should be filled bentonite powder.The welding connection between the rod and earth flat, painting on welding area. RCC concrete chamber of Size of 2x2x2 feet and 50mm thick with top cover for the earth pit, painting of earth chamber, identification etc and all as per specification.

Providing and installation of 40mm dia MS rod, horizontally all around the buildings in trench at a depth of 600 mm. The installation scope includes the welding connection between the MS rods, painting on welding area all as per specification

Providing and laying of single core 16 sqmm flexible copper cable (Green colour) for earthing. The scope includes suitably laying and clamping of copper cable wherever earthing point required like LDB, PDB, control panel, Battery charger, UPS etc.. all as required to complete the job in all respects.

Termination of single core 16 sqmm flexible copper cable for earthing. The scope includes supply of 2 nos ring type copper lugs on each side for earth point connection. Crimping of 16 sqmm lugs, bolts, nuts and accessories etc.., all as required to complete the job in all respects.

Providing and installation of following size of GI flat. The installation includes welding, drilling of flats, for fixing on wall / floor including supply of suitable anchor fastener flushed with flat, welding on support structure and painting on welding area etc, all as per specification.

40x4 mm GI Flat

25x3mm GI Flat

Lighting and Power circuit Wiring

Flood lighting: Providing and installation of 100W LED Flood light fitting with luminaire control, outdoor installation on pole / on the parapet wall. The scope includes installation, fabrication of suitable support structure, base foundation, fixing hardware as directed by EIC, approximately height at 7 mtrs along with necessary clamps, hardware accessories, supply and installation of GI junction box with suitable cable glands, supply and laying of 3Cx2.5 sqmm copper conductor flexible cable between GI Junction box and the fixture etc., all as required to complete the job in all respects as per specification.

Air Conditioner Circuit / X Ray Machine Circuit Wiring: Providing, laying, testing and commisioning of Receptacle point wiring (3Run x 4 Sq.mm) PVC insulated FR multistranded copper wire of 1100V grade in PVC conduits/ Caping and Casing on wall/ cable tray including supply of wires, terminal lugs, PVC conduit / Caping and Casing with necessary bends, junctions, clamps, and hardware accessories etc, and all as per the specification. ( From AC Distribution Board to 15A receptacle/Switch board/ 20A metal clad socket).

Providing and installation of 20 A single phase - 3 PIN industrial receptacle socket along with plug top controlled by 20A SP MCB and all as per specification.

Providing, fixing of switch board and wiring of 2/3 pin socket controlled by 16A switch (1 No 16A Switch and 1 No 6A/16A, 2/3 pin Sockets) with suitable GI box, front plate and inner connection etc.

Wiring from LDB / UPS DB panel / Indoor Light / Fan point wiring:: Providing, laying, testing and commissioning of Lighting point wiring, power circuit wiring, Ceiling fan (3Run x 2.5 Sq.mm) PVC insulated FR multistranded copper wire of 1100V grade in PVC conduit / Caping and Casing on wall/cable tray including supply of wires, celling rose and terminal lugs, from switch board to Light fixture, Light fixture to light fixture,switch board to ceiling fan.including supply of wires and terminal lugs, PVC conduit / Caping and Casing with necessary bends, junctions, clamps, ceiling rose and other hardware accessories etc., all as per specification . (From UPS DB to 6A receptacle modular type switch & socket for Computer power switch board / for Emergency lighting).

Providing, fixing of Switch Board, shall have 6A Switches -5nos, 6A 5pin socket -1nos, Step type fan regulator -1nos in suitable GI box, front plate and inner connection etc., (Modular type) (6 Lights , 1 Fan, 1 Socket)

Providing, fixing of Switch Board shall have 6A Switches -9 nos, 6A 5pin socket -1no , Step type fan regulator - 4nos in suitable GI box, front plate and inner connection Etc., (Modular type) (8 Lights , 4 Fan, 1 Socket)

Providing, fixing of Switch Board shall have 3 Nos 6A Switches with 3 Nos 6 Amps 5 pin Sockets, in suitable PVC box, front plate and inner connection,hardware accessories etc, and all as per the specification for office Guest computer point.

Providing and installation of 36W recessed full open 2x2 tile Square LED fitting with Lamp. The scope includes supply and laying of 3Cx1.0 sqmm copper conductor flexible cable run through flexible PVC hose between ceiling rose and the lighting fixture, along with suitable size of anchor fasteners, providing and connecting GI chains, copper lugs, termination and hardware accessories etc, all as per specification. Catalogue No Bajaj BZSSQL 36L LED WH GX or equivalent

Providing, installation, testing and commissioning of 1x20W surface mounted extruded polycarbonate housing with PC diffuse 4 feet LED fitting with Lamp. The scope includes supply and laying of 3Cx1.0 sqmm copper conductor flexible cable between ceiling rose and the lighting fixture, copper lugs, termination and hardware accessories etc, all as per specification. Catalogue No. Crompton Greaves CCS-100-20-SS-HL2-DP-NWH CG or Equivalent.

Providing, installation, testing and commissioning of RECESSED mounted round down light made with plastic housing and white power coated finish suitable for all office lighting applications. The scope includes supply and laying of 3Cx1.0 sqmm copper conductor flexible cable between ceiling rose and the lighting fixture, copper lugs, termination and hardware accessories etc, all as per specification. Catalogue No. Crompton Greaves BPSLR 18W LED WH RD SD or Equivalent.

Point wiring for Toilets Bulk head fitting with 9W LED bulb including supply & embedment/open of 25mm PVC Conduits with necessary conduit accessories, 3run x 2.5 sq.mm copper wire for phase, neutral & earth, Switch boxes, Switches , clamp and hardware accessories etc. (Modular type) all as per Specification and all as required to complete the job in all respects.

Ceiling Fan: Providing, installation and commissioning of 1200 mm sweep high breeze ceiling fan. The scope includes supply and installation of down pipe of required length , Fair hook and hardware accessories etc, all as per specification. The scope also includes supply of suitable anchors and flexible conduits with both end caps nuts and laying of 3Cx1.0 sqmm copper conductor flexible cable between ceiling rose and the ceiling fan, copper lugs, termination etc, all as per specification.

Exhaust Fan: Providing, installation and comissioning of 380 mm sweep heavy duty Exhaust Fans with louver. The scope includes supply and installation of anchnor fasterners for fixing of exhaust fan and hardware accessories etc, all as required to complete the job in all respects. The scope also includes supply and laying of 3Cx1.0 sqmm copper conductor flexible cable between ceiling rose and the exhaust fan, copper lugs, termination etc, and flexible conduits with both end caps nutsall as per specification.

Panels

Main LT Panel: Providing, installation and commissioning of LT Indoor power panel working on 440V 3-Phase & Neutral, 50Hz, AC supply. It shall be extendable at both ends with Tinned copper bus bars suitable for 35 KA for 1 sec , fully compartmentalized , dust- proof and vermin proof, 2 mm /1.6 mm CRCA sheet steel enclosure, 3 mm load bearing framework, fixed on base frame 5 mm, powder coated along with necessary hardwares and accessories, cable troughs, termination and cabling troughs, transparent insulation sheets to protect from shock, cable chamber for out going etc. The scope includes installation and commissioning of LT indoor power panel , positioning and welding / anchoring in place on the floor, welding, painting on welding area, alignment of panel, site assembly of loosely furnished accessories, with all labour & materials as per specification and conforming to relevant IS and as directed by the Engineer -in -charge Busbar - 400A TPN Tinned Copper busbars suitable for 35kA for 1 sec. Outgoing feeders Incomer -1 Nos 400A TPN Thermal magnetic MCCB with suitable CT, multi function meter, indication lamps (LED type ) and control MCBs. Out going - 100A TPN Thermal magnetic MCCB - 8 nos. 63A TPN Thermal magnetic MCCB -12 nos.

Providing, installation and commissioning of various type double door Indoor distribution board, incorporating tinned copper busbar, CRCA sheet steel enclosure, powder coated, with suitable screwless terminal blocks for Incoming and outgoing cables and 10% additional terminals for outgoing cables for future circuit, suitable size of earth busbar, prewired with copper wire, suitable knockout opening for conduit and cable entry along with cable glands and hardware accessories etc . The scope includes fabrication and installation of support channels, supply and installation of suitable anchor fasteners for support erection, necessary hardware, fixing identification Tag of alphanumeric letter embossed on 0.5 mm SS plate of suitable size, danger sticker as per IS, hardware accessories etc, all as per specification conforming to Indian standards and as directed by EIC.

Lighting Distribution board lncoming: 63 TPN RCBO with 30 mA sensitivity – 1 No 63A TPN Tinned copper busbar Outgoing : 32A DP MCB -3 Nos 20A SP MCB -12 nos

UPS Distribution board lncoming: 63 TPN RCBO with 30 mA sensitivity – 1 No 63A TPN Tinned copper busbar Outgoing : 32A DP MCB -3 Nos 20A SP MCB -12 nos

Power distribution board In coming : 100 TPN RCBO with 30mA sensitivity – 1 No 100A TPN Tinned copper busbar Out going: 20A SP MCB - 18 nos

UPS Changeover Panel Incoming 2 Nos - 63 Amps Three Phase 500V 4 Pole Change Over Switch Outgoing 8 Nos - 32A MCB, Three Pole & Neutral, 10KA

Providing, installation and commissioning of 400 Amps 3 Three Phase 4 Pole Change Over Switch with all labour & materials as per specification and conforming to latest edition of relevant Bureau of Indian Standards & as approved.

Providing and Installation of 300 mm size perforated ladder type hot dip GI cable trays for cable. The scope includes supply of cable trays with necessary fabricated bend, tees, elbows, connecting plate, bolt nut hardware accessories, supply and fixing of anchor fasteners for cable tray support erection etc, all as required to complete the job in all respects.

Provide, fabrication and erection of various type structural supports for cable trays, LDBs and panels as per site requirement using various size of ISMC 100, ISA 75, Sheets 2mm, MS plates 3 mm / 5 mm, Chequred plates 5 mm for covering of trenches or any other job required to complete the works. The scope includes welding ,cutting, drilling, providing painting with single coat of red oxide primer, double coats of silver enamel paint as directed by EIC, supply of necessary size of bolt and nuts etc. doing good as per specification.

Providing and installation of l000 mm wide 2 mm thick PVC insulation mat for maintenance of LV panels as per IS 15632. Installation scope includes cleaning the area, applying adhesive suitable for supplied mat, laying of mat etc. as required at site and as per specification by EIC.

Providing and installation of Danger board - metal board sticker (433V/230V) as per IS

Providing and installation of Electrical First aid Box

Providing and installation of First aid chart in three languages

Providing and laying of following sizes of 1100V grade XLPE Armoured Aluminium cables, XLPE insulated, galvanized flat steel armoured, extruded PVC inner sheath and outer Sheath cable conforming to IS 7098 ( Part -1). The scope includes laying of following size of AL cable in excavated trench/ Hume pipes/ wall/ cable tray / any other support structure, using necessary hardware for clamping of cable, cable laying without any kinks and bends, aluminimum tag with identification for both side cable etc all as per IS specification.

4C x50 Sqmm XLPE Aluminium Armoured Cable

4C x 25 Sqmm XLPE Aluminium Armoured Cable

Transportation from NPCIL strore, Laying of following size of 1100V grade Armoured Aluminium cables, XLPE insulated, galvanized flat steel armoured, extruded PVC inner sheath and outer Sheath cable conforming to IS 7098 ( Part -1). The scope includes laying in excavated trench/ Hume pipes/ wall/ support structure, using suitable fasteners and clamps, for clamping of cable, cable laying without any kinks and bends, aluminimum tag with identification for both side cable etc as specified by EIC to complete the work. (Excavation and backfilling as per requirement is covered under relevant Schedule

3.5C x 400 Sqmm XLPE Aluminium Armoured Cable

Providing and installation of Raychem heat shrinkable straight through kit for 3.5C x 400 Sqmm XLPE Aluminium Armoured Cable to complete the job in all respects.

Glanding and termination: The following size of AL armoured Cable glanding and termination. The scope includes Providing and installation of double compression heavy duty brass cable gland with nickel plated with suitable size Aluminium Lugs, termination with bolt nut and other hardware accessories etc, all as required to complete the job in all respects.

3.5C x400 Sqmm XLPE Aluminium Armoured Cable

4C x50 Sqmm XLPE Aluminium Armoured Cable

4C x25 Sqmm XLPE Aluminium Armoured Cable

Provide and installation of 75 mm dia - medium duty GI pipe for laying of cable. The scope includes installation of pipe for road crossing/ Wall etc.., all as required to complete the job in all respects as per the direction of Engineer-in-charge.

Provide and installation of cable markers with route mark and LT cable/Telecom/OFC identification for underground cables. The scope includes supply of cast iron route markers with 200x200x200mrn size 1:2:4 concrete base and installation of route marker on existing cable route area etc , and are all as per specification and as per the direction of Engineer-in-charge.

Providing of 9 " x 4 1/2" x 3" table moulded bricks/Flyash bricks for cable protection (18 nos/mtr)

Uninterrupted Power Supply (UPS)

Providing, installation and commissioning of 15 KVA, 440V, 50Hz, 3 Phase input and 3 Phase output High effiency on line UPS system with 3- level IGBT Rectifier, IGBT Inverter, Inbuilt Isolation, Transformer, Input factor : 0.99, Input current Harmonics THDI less than 2.5% , Overall Efficiency greater than 98%, with 120 mins power backup, necessary SMF batteries, DC cables, cabinet, Interlink connector, Hardware accessories etc, including earthing connection to earth point and to complete the works as per specification.

Providing and installation of PVC Thermoplastic Junction boxes with 8 nos of Terminal blocks for connection up to 6 sq mm

Fire Alarm and PA System

Providing, installation, programming, testing and commissioning of 2 Loop Micro processor based Analogue Addressable fire alarm control panel with 2 wire fault tolerant loop along with one Rs 485 network card, required loop networkable type (each loop accessing minimum 99 detectors and minimum 99 modules) fire alarm /detection control panel. Panel shall work in CLIP protocol. The panel shall have rectifier, 2 Loop cards, 80 character LCD unit to indicate Fire/ Fault Signal with address and analog output. The panel shall have minimum 2 Serial Ports. The panel shall have a built in power supply and battery charger along with maintenance free 12AH, 2x12 volt SMF Lead acid batteries capable of running for a minimum of 16 hours with battery charger complete as required and as per specifications. Conforming to BS 5839 standards and approved EN54/ LPCB/VDS/ US/ BSA standards

Providing, installation, programming, testing and commissioning Repetor panel along with two RS-485 network card for integrating with existing Fire alarm panel

Supply and installation of Intelligent analogue addressable multi criteria type smoke cum thermal detector with standard base as per technical specification.

Supply and installation of Intelligent analogue addressable Single Action Pull Station Type Manual Call Points with standard base as per technical specification.

Supply and installation of Addressable Sounder cum Strobe as per technical specification.

Supply and installation of Analogue addressable Fault Isolator Modules.

Supply and installation of 6W box speaker (Metal), as per technical specification

Supply and installation of 6W PA box type speaker along with volume control PVC box, front plate, with standard base and other hardware accessories etc required to complete the job in all respects.

Supply and installation of six zone pre amplifier with single or dual channel operation and shall have EMG input volume control to connect with EPABX as per specification

Supply and installation of power amplifier 480 watts as per specification

Supply and laying of LAN CAT-6 STP cable (IC332-3) through PVC conduit, as per the technical specification.

Supply and laying of 4 Pair 0.5 mm tinned copper conductor PVC sheathed PVC insulated telephone cable through PVC conduit

Supply and laying of 2C x 1.5 Sq.mm armoured multi stranded FRLS cable in PVC conduit as per IS 1554 (Part 1), all as per the engineer in charge direction.

Supply and laying of 25 mm GI conduit conforming to IS with necessary bends, Tee and pull box and accessories as directed by the Engineer in charge.

Supply and Installation of 2 module box with 1-way 'RJ-11 telephone socket' (RH1) which includes supply and concealing of factory made G.I. or epoxy powder coated MS boxes in the wall including supply and fixing of grid plates, cover plates, hardware, dummy covers, etc of approved make for Installation of the modular sockets and Termination of cable at both the ends.

Supply and Installation of 2 module box with 1-way 'RJ-45 LAN socket' which includes supply and concealing of factory made G.I. or epoxy powder coated MS boxes in the wall including supply and fixing of grid plates, cover plates, hardware, dummy covers, etc of approved make for Installation of the modular sockets and Termination of cable at both the ends.

Supply and Installation of floor / wall mounted type 19 U rack with patch panel and connection accessories as per the technical specification

Applicable GST Rate (%) Included in the Quoted Price

LEVELBUILDERS PRIVATE LIMITED (BID ID -799486)

S.A.V.Constructions (BID ID -792613)