Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAccepted-AOC | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹42.6 L+₹57,220 (1.36%)Rejected-Finance 292 GROUND FLOOR D BLOCK SAI DHAM RAJ CITY LONI BANTHLA GHAZIABAD GHAZIABAD UTTAR PRADESH 201102 | GHAZIABAD | UTTAR PRADESH | 201102 | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹43.0 L+₹97,206 (2.32%)Rejected-Finance MANEGAON DIWAN BADA KHAMARIA JABALPUR M P PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | L3 | Rejected-Finance Third lowest amount quoted | |
| 4 | L4₹43.0 L+₹1.0 L (2.40%)Rejected-Finance 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L4 | Rejected-Finance Fourth lowest amount quoted | |
| 5 | L5₹43.0 L+₹1.0 L (2.46%)Rejected-Finance 1432 2 UDAI NAGAR NO 2 POST OFFICE JABALPUR MP 482009 | JABALPUR | MADHYA PRADESH | 482009 | L5 | Rejected-Finance Fifth lowest amount quoted |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Dhiraj Kumar, IDSE, EE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
As per BOQ
2022_MES_530456_1
8438/E8
Open Tender
Civil Works
Item Rate
240 days
Garrison Engineer (East) Jabalpur
D a (i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹1 L
Yes
1 Sept 2022
14 Jun 2022
22 Jul 2022
14 Jun 2022
20 Jul 2022
1 Jul 2022
14 Jun 2022 - 21 Jun 2022
60 days
Amount
Dismantling Asbestos Cement (corrugated, semi-corrugated, etc.) sheets in roof coverings.
S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.
S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.
Dismantling timber scantling 40 sq cm & over in section, any position in unframed work.
All as per Srl item No 4 here-in-before but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section.
S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A.
S & F mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A.
M&L for painting two coats on new steel surfaces including preparation of surface and one coat of red oxide zinc chrome primer, on surfaces of any description, over 10cm in width or girth, not otherwise described.
M&L for PCC (1:2:4) type B1 using 20 mm graded aggregate as in bed block/hold fast blocks, benching and coping etc with & including necessary form work for fair faces of concrete, complete all as specified and directed.
M&L for preparation of surface including cleaning, drying and removing all oil, grease, dust etc and priming the surface with a coat of Dr. Fixit primeseal apply at the rate of 8-10 Sqm/Ltr and applying two coats of Dr. Fixit Hydroshield PUD plus by brush or roller to achieve a total depth of 0.8 - 1mm with coverage of approximately 0.60Litre/Sqm per coat including filling the gap between roof tiles with creck filler properly. Note : (i) The contents of Dr. Fixit Hydroshield PUD plus shall be thoroughly stirred for at least 2 - 3 minutes using a slow speed (300-400 RPM) drill machine attached with a mixing paddle. Do not dilute with water. Keep on stirring during application. (ii) All joints corners/drainage outlets and penetration points shall be treated prior to all application of Dr. Fixit Hydroshield PUD plus. All corners, gaps, joints, protrusions and outlets should be coated with an extra coat incorporating reinforcing fabric. (iii) Allow complete drying between coats with a minimum 3 to 4 hours depending on the weather conditions.
M&L for Rendering 10mm thick on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified & directed.
Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specified and directed.
M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600 x 600mm compressing of GI powder coated main runner of dimension 39mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.
Demolition of cement concrete in ground floor paving n. exc 15 cm thickness below or above ground level complete all as directed.
M & L for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified.
M & L non skid ceramic coloured tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors/skirting laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match.
M & L non skid ceramic coloured tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.18 sqm but nexc 0.36 sqm, in floors/skirting laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match.
M & L glazed ceramic coloured & digital tiles 350 x 250 x 7 / 450 x 350 x 7 mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed.
M & L Machine cut kota stone slab flooring 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with 20 mm thick CM 1:6 bedding.
M & L Machine cut kota stone slab flooring 20 - 25 mm thick in riser of steps, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and fair incl expansion joint at every 3.0m interval and every corner complete all as specified and directed.
Demolition of brick masonary built in cement mortar all as specified.
M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as specified.
All as per Srl item No 24 here-in-before but except bricks.
Taking down cement plaster from brick walls including racking out joints hacking for keys scrubbing down with water etc complete all as specified.
M&L for Rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed.
M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified & directed.
M & L preparing surface of newly plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering.
M & L preparing surface of old plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering.
M&L Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer.
M&L 3 mm thick wall care putty on wall complete.
Taking down shutters of any description exc 1 Sqm each but not exc 2 Sqm each.
Taking down chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) & removing from site complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) & removing from site complete all as specified and directed.
S&F2nd class teak HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.
S & F factory made 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as directed by Engineer-in-Charge.
S & F factory made 35 mm thick, plain framed panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned and chemically pressure treated.
S&F factory made soild PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2010) complete all as specified and directed.
S & F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30 mm thick ( stiles ), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specifications and drawings.
S&F (factory made) steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed.
S&F (factory made) steel windows with side hung shutters of glazed or fly proofing including projecting type hinges with steel handle and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed.
S&F (factory made) steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and directed.
M&L Mild steel work framed such as grills,gratings etc. with ends of bars souldered and or rivetted or forged into spikes,framed guard bars, frame work of water tanks and similar work conforming to Fe-290 (Gd-E-165) complete all as specified and directed.
S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and with stainless steel wire staples complete all as specified.
M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane complete all as specified.
All as per Srl item No 46 here-in-before but frosted glass at one side.
S&F 100 mm long stainless steel but hings medium weight complete.
S&F 75 mm long stainless steel but hings medium weight complete.
S & F 150 mm long extroded aluminium alloy handles, fabricated type anodized complete.
S & F 100mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge.
S & F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.
S & F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.
S/F 300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified.
S & F M S 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring with rubber shoe over all length as cover plate 150 mm complete as in repairs.
S&F mild steel small articles as in hold fasts, bands, supports, straps etc complete all as specified and directed. Note : The hold fasts shall be treated with 2 coats of black bituminous paint & cost of the same will be included in the above quoted rate.
M&L for Preparing new surface of wood and wood based materials new or old of any description and girth not otherwise described and apply two coat of synthetic enamel paint over a coat of pinck primerl complete all as specified.
M&L for 60 mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-35 designation of section as approved by GE in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed. Make :- Mehtab Tiles, Indore (MP) or Nitco, Mumbai or Mayur Tiles & Interlocking pavers, Lucknow or Star Tiles & Industries, Ramadevi, Kanpur as approved by GE.
M&L Stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cm x 30cm x 15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, applying two coats of paints in zebra pattern as directed by Engr-in-Charge.
S&F in repairs water closet vitreous China (squatting pan) complete including provision of lime concrete bedding vitreous china squatting pan orrisa pattern of size 580 x 440 mm, white, with CI 100mm bore P or S trap front or back inlet and foot rest any pattern excluding flushing cistern complete all as specified and directed.
S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.
S&F in repairs vitreous China Wash Hand Basin, white, flat back size 550 × 400 mm including cutting for and pinning in ends of brackets including brackets but exclusive taps, waste, chain and leg porcelain stop pan complete all as specified.
S&F in repairs 15mm bore, pillar taps, fany type chromium plated, cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified.
S&F in repairs 15mm bore Bib tap standard of cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe and fixed complete all as specified. (Minimum weight 15mm-90gms/20mm- 125gms).
S&F in repairs 15mm bore, angle/stop cock, fancy type, chromium plated,cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule complete all as specified.
S&F grating fixed in repair 100mm dia complete all as specified and directed.
S&F in repairs 15mm size PVC connection with PTMT nuts of length 600 mm.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified.
S&F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified.
S & F 75 mm dia, PVC bend complete all as specified and directed.
S&F 110mm dia PVC bend with access door complete all as specified and directed.
S&F 110mm bore PVC junction single 'T' equal with provided access door complete al as specified and directed.
S&F PVC 75mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.
S&F PVC 110mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
S&F in repairs 50mm bore High density poythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m in waste pipe for WHB and sinks,complete all as specified and as directed.
S&F in repairs waste coupling/fitting brass chromium plated for steel sinks, basins etc. with long screwed shanks and fly nuts, flange and bedded in red head cement and other end fixed of bore 32/40 mm.
M&L 75 mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement.
Taking down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store.
M&L for 20 mm dia tubes, 'medium grade', galvanised, with all fitting; fixed to wall, laid in trenches incl necessary cutting chasing pinning and making surface good all as directed.
Refixing 20 mm dia GI tubing complete with all fittings retrive from Srl item No 81 above.
Taking down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store.
M&L for 15 mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cutting, chasing, pinning and making surface good as directed
Refixing 15 mm dia GI tubing complete with all fittings retrive from Srl item No 84 above.
Dismantling existing water storage tanks exc 500 and n exc. 1000 liters capacity & removing from site complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks of 1000 ltr capacity double layers (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs.
S&F in repairs Soap dish, vitreous China white, approximate size 160 x 160 x 90mm.
S&F in repairs tubular towel rail brass chromium plated, 20mm dia, 60cm long between flanges in repairs.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in Sub base of floor complete all as specified and directed.
Schedule of credit amount of Rs. 1,52,639.00 to be deducted during AOC
Goodluck Enterprises
M/S BHATIA CONSTRUCTIONS
a k builders
M/S RAJ BUILDERS
JITENDER SINGH
sunil traders
RASTOGI BUILDERS
M/S A K MUKHERJEE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .