AGE I CGN 21 22 23 PROVN OF COVERED PASSAGE NEAR BLDG NO P 04HARDTSANDING NEAR INDOOR SPORTS COMPLEX ADDN ALTERATION TO FLOOR TILES IN RELIGIUOS HALL AT COAST GUARD AMINISTRATIVE COMPLEX AND PROVN OF FLAG POST WITH PLATFORM AT MES OFFICE AT SEC 62

Amount

Surface dressing n exc 15 cmm deep, Soft/loose soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Removing excavated soil n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete

Retruning, filling in, including spreading, levelling watering and well ramming in layers not exc 25cm in soft/loose soil.

M&L for cement concrete in foundation Type D2 1:4:8 (40mm graded aggregate) filling and mass concrete complete

M&L for Brickwork with sub- class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6)

M&L Hardcore of gauge of broken bricks n exc. 63mm, deposited, spread and levelled in layers n.exe 15 cm thick, watered and rammed to a ture surface complete.

M&L for 75mm thick plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) in floors complete.

M&L for 20mm thick screed bed in CM 1:6 or bedding layer for laying floor finishes

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L for 10mm thick rendering for backing of granite in CM 1:3 on fair faces of brick work or concrete surfaces.

S&F Stainless steel made of hollow tubes/pipe (grade 316) for flag post with necessary standard bracket with hook, standard pully standard mettaled top and stainless steel chain including welding grinding , buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, I/c fixing the grills with necessary accessories & stainless steel dash fasteners ,stainless steels bolts etc. of required size with suitable arrangment as per approval of Engineers -in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accesories such as nuts ,bolts, fasteners etc complete all as specified and directed.

M&L for engraving MES logo (of size 750mmx1000mm) and "ASSISTANT GARRISON ENGINEER, NOIDA' (size of letters 125mm) over 18mm thick Granite stone slab including metallic golden colour filling complete as specified by Engr-in-charge.

Excavating in post holes (or similar holes) in soft/loose soil each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete.

M&L PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundation of posts complete all as specified.

S&F 80 mm heavy Rolled mild steel tubes for structural purpose and section as in main and corss beams,columns, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde E-250) quality A.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde E-250) quality A.

M & L for Steel rectangular section for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S&F plain, galvanised MS sheeting of 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings including fixed with J hooks and washers to frame work as in roof with grade of zinc coating 275 commplete all as specified and as directed by engr-in-charge.

S & F for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry as in roof over coverd passage frame work complete all as specified and as directed by eng-in-charge.

Preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide zinc chromium complete all as specified and as directed by the Engineer-in-Charge

M&L 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone agg) as in floor.

M&L 15 mm thick screed bed or bedding layer of cement mortar for laying floor finish in CM 1:6

S&F mate finish ceramic tiles 8 to 10mm thick (square/rectangular) area of each tile exc .11 Sqm but not exc .18 Sqm etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as approved by users directions.

Hardcore of broken stine and boulder of gauge exc. 63mm but n. exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L rendering 10mm thick in cement motor 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M & L for preparation of new or previously untreated Surfaces of brick ,stone concrete,asbestos any description over 10cm girth or width, not otherwise described apply one coat of plastic emulsion paint over one coat of primer complete all as specified and directed by engineer -in- charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl removing the demolished material out of MOD land complete all as specified.

M & L for 15 mm thich Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L for Virified Moroccan tiles any colour 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding .42 sqm, in floors laid with spacers and grouted with sika epoxy tilegrout over etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and approved by users.

M & L for Virified Gray coloured tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding .36 sqm but not exceeding .42 sqm, in floors laid with spacers and grouted with sika epoxy tilegrout over etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and approved by users.

Surface excavation in soft/loose soil n,.exc 30 cm deep and averaging 15cm deep and getting out.

M&L for 100mm thick plain cement concrete type C-2, 1:3:6 (40mm graded aggregate) in floors complete.

M&L for cement concrete Type B0 (1:2:4) (12.5mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete.

M&L for sand filling under floor in foundations inclding watering and consolidation complete.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.

Sanjay Associates

M/S BEE ESS ENTERPRISES

M/S R.S. Builders

M/s Sagar Construction Company