Repairs to Sunken floors roofs joinery sanitary fittings plastering internal water supply and certain other misc works Central Intitute and Officers Md accn in the area of AGE B/R-II under GE(N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified non skid ceramic coloured tiles non skid, 8-10 mm thick of size 395mmx395mm as approved by GE (square / rectangular) as in floor etc laid over and including screed bed 20 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium series of size 300mm x 450mm, 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium series of size 600mmx300mm, 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Vitrified ceramic tiles double charge/ultra charge ,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Vitrified ceramic tiles double charge/ultra charge ,10 mm thick (square / rectangular) of size 600 x 1200 mm of any shade as approved by GE in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per item No 08 (here-in-before) but on skirting

Material and labour for Digitally printed paver tiles of size 300 mm x 300 mm having thickness of 10 mm as approved by GE with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors over and including screed bed 15mm thick in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge Make : Dura Stone by Somany / Endura by Johnson or equivalent as approved by GE.

M & L for Chequred cement concrete tiles with pigment 25 cm x 25 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed of 15 mm thickness in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M & L for Glossy finish Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incl sand cushioning 30 mm thick etc complete all as specified and directed by Engineer-in-Charge

M&L for Hand cut kota stone slab flooring 20-25mm thick laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed in neat grey cement slurry and pinted with grey cement and pigment to match the shade of stone slab including rubbing and mirror polishing etc complete all as specified and directed by Engineer-in-Charge.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat grey cement slurry and pointed with grey cement and pigmnet to mathc the shade of stone slab including rubbing and mirror polishing etc complete all as specified and directed by Engineer-in-Charge.

Material and labour 20mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills, jambs, lintel etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block masonary built in cement mortar etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Pre-cast cement concrete 1:3:6 (20 mm graded stone aggregate) type-C-1 block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete Set in cement mortar 1:6 etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

S&F of rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 (Gde-E- 250) quality-A etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

S&F pre painted manglore pattern galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverin/cladding to wall fixed with self tapping screw etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverin/cladding t wall fixed with self tapping screw etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china two piece wall hung wash down water closet (CLAIR) Cat Part No S101102 of CERA, white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs Counter type wash hand basin vitreous China complete platform of granite of size (900x600mm), of Cat Part No S2020153 of CERA COLMID white (5790) of size 500X395x135 mm, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge

Preparing unplastered or plastered old surfaces and applying two coats of oil bound distemper on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge

Preparing unplastered or plastered old surfaces and applying one coats of oil bound distemper on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge

Preparing old unplastered or plastered surfaces and applying two coats of cement based paint on walls etc complete all as specified and directed by Engineer-in-Charge

Preparing old unplastered or plastered surfaces and applying one coats of cement based paint on walls etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames n exc 1.5 Sq m with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

Material and labour for filling in door frames in plain cement concrete, 1:2:4 type B0, using 12.5 mm graded aggregates etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

M&L for 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partcile board with commercial face veneers; supplied and fitted to chowkats etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and directed by Engineer-in-Charge

Supply and fix galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for one coats of synthetic enamel paint for old wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for one coat of synthetic enamel paint for old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild Steel 20 mm dia decorative powder coated curtain rods with fixing brackets fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc etc complete all as specified and directed by Engineer-in-Charge

Supply and fixe in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge .

S&F in repair wall mixture (3-in-1), with provn for overhead shower etc complete all as specified and directed by Engineer-in-Charge of Cat Part No F1015403 of CERA

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge Make- Cat Part No F1015151 of CERA

Supply and fixing in repairs Consealed Stop cock cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make-F1015361 of CERA

Supply and fixing in repairs angle Cock with wall flange cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make-F1015201 of CERA

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make cate part No F1015101 of CERA

Supply and fix in repairs, shower rose with shower arm etc complete all as specified and directed by Engineer-in-Charge Make -Cat Part No

S&F in 10 mm thick toughen glass for shelves in corner etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved qualityas etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs PVC connections 15 mm size with Stainless steel Nuts of length 600mm etc complete all as specified and directed by Engineer-in-Charge

S&F for PVC (SWR) floor trap, plain with grating including jointing with solevent cement 75 mm bore etc complete all as specified and directed by Engineer-in-Charge

S&F for low density polyethelene pipes 32 mm bore (LDPE) of pressure rating 6 Kg/cm² laid in trenches/fixed to wall etc complete all as specified and directed by Engineer-in-Charge

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and connections,15 mm bore etc complete all as specified and directed by Engineer-in-Charge

All as per item No 74 (here-in-before) but 20mm bore

S&L of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches including all necessary fittings etc complete all as specified and directed by Engineer-in-Charge

All as per item No 76 but 20mm outer dia etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in the same opening including easing and adjusting and also refixing builders hardware as required including renewal of unservieable screws etc complete all as specified and directed by Engineer-in-Charge

M&L for 2 mm thick wall care putty on wall (One layer) etc complte all as specified and directed by Engineer-in-Charge

S&F PVC Mirror Cabinet Make Cat Part No 555 of Prayag or equivalent in Polytuff etc complete all as specified and directed by Engineer-in-Charge

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for false ceiling with vinyle faced Arn-GYP-FB, celing 600 x 600 x 9mm thick with washable metallized polyster foil backing with vinyle covered edges supporting sections shall be of sutable size from same makes embossed on section and level adjuster duly suspended by 2mm dia GI wire fixed to roof at 600mm center to center as per manufacturere,s instruction and etc complete all as specified and directed by Engineer-in-Charge Make : Armstrong or equivalent in Saint Gobin/Lafarge

M&L in repairs for false ceiling with vinyle faced Arn-GYP-FB, celing 600 x 600 x 9mm thick with washable metallized polyster foil backing with vinyle covered edges etc complete all as specified and directed by Engineer-in-Charge Make : Armstrong or equivalent in Saint Gobin/Lafarge

M & L for providing water proofing treatment on roofs, as per manufacturere's instructions and as specified after taking down/out as existing out at site etc complete all as specified and directed by Engineer-in-Charge (a) Cleaning the newly plasterd surfaces with wire brushes and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface etc complete all as specified and directed by Engineer-in-Charge (b) Applying and laying torch APP polymer modifiedbituminous membrance 3mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by therofusion process as per manufacturers specification including applying one coat of aluminium paint etc complete all as specified and directed by Engineer-in-Charge Make : Super Thermolay of STP or equivalent in TEXSA India Ltd / IWL Ltd / Tiki Tech

Material and labour for plastering 10 mm in cement and sand mortar (1:3) using 100 % course sand on roof mied with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs rotational moulded polyethylene water storage tanks Tripal layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipr and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per item No 86 (here-in-before) but 1000 ltrs etc.

S & F powder coated aluminium frame for fixing doors, windows, ventilaters with one or more rebate with suitable size of screws etc complete all as specified and directed by Engineer-in-Charge

S&F for powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 38,820.00 shall be deducted from BOQ on account of schedule of credit

M/s Automech Engineering

N. H. Saluji & Associates

MS. A.S. CONSTRUCTION