Karnataka

Active

Works

Buildings

CONSTRUCTION OF A LADIES TOILET IN THE OFFICE PREMISESS, INSTALLATION OF A WATER PURIFIER AND RENOVATION OF STORE ROOM WORK TO OFFICE OF THE ASSISTANT EXECUTIVE ENGINEER, SUB DIVISION MANDYA

Rural Development and Panchayat Raj Department

RDPR Division Office Mandya | Mandya, Karnataka

Amount: ₹3.1 LCloses: 22 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes22 Oct 2026
Bid Opening23 Oct 2026

Tender Value

₹3.1 L

EMD Value

₹7,640

Closing Date

22 Oct 2026, 4:00 pm

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Shobha K

Mobile Number

Work Description

CONSTRUCTION OF A LADIES TOILET IN THE OFFICE PREMISESS, INSTALLATION OF A WATER PURIFIER AND RENOVATION OF STORE ROOM WORK TO OFFICE OF THE ASSISTANT EXECUTIVE ENGINEER, SUB DIVISION MANDYA

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT29788

Reference Number

RDPR/2026-27/BD/WORK_INDENT29788

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Mandya

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredPWD Registration Certificate Class-IV and above

RequiredAnnual Turnover Certificate with Profit and loss account statement for last five years

RequiredProfit and Loss accounts statements for last 5 years for the period 2021-22 to 2025-26

RequiredGST Registration and Returns for the year 2026-27 GSTR-3B

RequiredList of existing commitments and ongoing works

RequiredList of works for which tenders already submitted

RequiredName and Address of Contractor for Communication

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Financial bids of the technically qualified bidders only will be opened

Right of acceptance or rejection of any or all tenders with or without any reasons is reserved with the undersigned or any concerned higher officers of the Department

Conditional tender will not be Considered

Tender processing amount will not be refundable

The Photos and Video graphs should be taken before commencement, during execution and after completion of the work in presence of nodal officers

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing kppp portal

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund

Executive Engineer has authority to accept or reject any tender without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

Before tendering for the works the tenderer may inspect the site personally

The Employer is not responsible for any delay in accessing KPPP portal

The KPWD Code, KTTP Act/Rules ,Delegation of Powers and other Government Orders issued by the Government from time to time will apply

Additional GST shall not be paid in the extended period of contract for which the contractor alone is responsible for the delay as determined by the authority while granting the extension of time

GST shall be paid to the tendered amount separately

Successful bidder submitting bids below the amount put to tender will be required to submit the difference amount in the form of FDR/TDR/DD/Pledge in the name of EE PRED Mandya within 20 days from the date of receiving the letter of acceptance as on additional security paid for unbalanced tender. Failing for which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008

All other terms and conditions as per tender documents of KW-1 and as per tender notification

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc.

Contractor should made an agreement within 20 days from the date of LOA. work should be commence within 2 weeks time from the date of work order. If not tender will be cancelled at the contractors own risk and cost.

Technical Criteria

Capabilities of Vendor

The Tenderer shall have valid Class-IV and above KPWD Licence.

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

Reports on the financial standing of the tenderer such as profit and loss statements and auditors reports for the last five years

Others -- Reports on the financial standing of the tenderer such as profit and loss statements and auditors reports for the last five years

Annual Turnover Certificate in all classes of Civil Engineering works only for last Five Financial years ie., 2021-22, 2022-23, 2023-24 2024-25 and 2025-26 Certified from Charted Accountant with compulsory UDI number Profit and Loss, balance sheet shall be enclosed

Audited CA Certificate of Annual Turnover

GST Registration and Returns for the year 2026-27 GSTR-3B

GST Registration

Others

List of existing commitments and ongoing work

Others -- List of existing commitments and ongoing work

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

Name and Address of Contractor for Communication

Others -- Name and Address of Contractor for Communication

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹7,640

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

23 Oct 2026

Download Ends

21 Oct 2026

BOQ Preview

•

CONSTRUCTION OF A LADIES TOILET IN THE OFFICE PREMISESS, INSTALLATION OF A WATER PURIFIER AND RENOVATION OF STORE ROOM WORK TO OFFICE OF THE ASSISTANT EXECUTIVE ENGINEER, SUB DIVISION MANDYA

•

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

•

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Desilting of sewerlines by mechanical (Jetting,Sucking,Grabber,Scrap per etc.,) means ,setting up the over pumping arrangements,rodding and dislodging of accumulative silt from the pipeline ,removal o...

•

Providing and fixing G.I. inlet connection for flush pipe connecting with

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC BEND

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC Elbows

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 140 mm dia PVC Tee

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 75 mm dia PVC BEND

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 75 mm dia PVC Elbows

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 75 mm dia PVC Tee

•

Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locat...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW1-GEN 2026-27_29788.docx

Tender Document • 1.17 MB

NIT_15_2026-27.pdf

Others - Tender NOTIFICATION • 0.41 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Buildings

CONSTRUCTION OF A LADIES TOILET IN THE OFFICE PREMISESS, INSTALLATION OF A WATER PURIFIER AND RENOVATION OF STORE ROOM WORK TO OFFICE OF THE ASSISTANT EXECUTIVE ENGINEER, SUB DIVISION MANDYA

Rural Development and Panchayat Raj Department

RDPR Division Office Mandya | Mandya, Karnataka

Amount: ₹3.1 LCloses: 22 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes22 Oct 2026
Bid Opening23 Oct 2026

Tender Value

₹3.1 L

EMD Value

₹7,640

Closing Date

22 Oct 2026, 4:00 pm

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Shobha K

Mobile Number

Work Description

CONSTRUCTION OF A LADIES TOILET IN THE OFFICE PREMISESS, INSTALLATION OF A WATER PURIFIER AND RENOVATION OF STORE ROOM WORK TO OFFICE OF THE ASSISTANT EXECUTIVE ENGINEER, SUB DIVISION MANDYA

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT29788

Reference Number

RDPR/2026-27/BD/WORK_INDENT29788

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Mandya

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredPWD Registration Certificate Class-IV and above

RequiredAnnual Turnover Certificate with Profit and loss account statement for last five years

RequiredProfit and Loss accounts statements for last 5 years for the period 2021-22 to 2025-26

RequiredGST Registration and Returns for the year 2026-27 GSTR-3B

RequiredList of existing commitments and ongoing works

RequiredList of works for which tenders already submitted

RequiredName and Address of Contractor for Communication

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Financial bids of the technically qualified bidders only will be opened

Right of acceptance or rejection of any or all tenders with or without any reasons is reserved with the undersigned or any concerned higher officers of the Department

Conditional tender will not be Considered

Tender processing amount will not be refundable

The Photos and Video graphs should be taken before commencement, during execution and after completion of the work in presence of nodal officers

Executive Engineer has authority to accept or reject any tender without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

Before tendering for the works the tenderer may inspect the site personally

The Employer is not responsible for any delay in accessing KPPP portal

The KPWD Code, KTTP Act/Rules ,Delegation of Powers and other Government Orders issued by the Government from time to time will apply

Additional GST shall not be paid in the extended period of contract for which the contractor alone is responsible for the delay as determined by the authority while granting the extension of time

GST shall be paid to the tendered amount separately

All other terms and conditions as per tender documents of KW-1 and as per tender notification

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

It is to be noted that any false documentation is found to be uploaded, the action may attract punitive measures such as blacklisting, cancellation of registration etc.

Technical Criteria

Capabilities of Vendor

The Tenderer shall have valid Class-IV and above KPWD Licence.

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

Reports on the financial standing of the tenderer such as profit and loss statements and auditors reports for the last five years

Others -- Reports on the financial standing of the tenderer such as profit and loss statements and auditors reports for the last five years

Audited CA Certificate of Annual Turnover

GST Registration and Returns for the year 2026-27 GSTR-3B

GST Registration

Others

List of existing commitments and ongoing work

Others -- List of existing commitments and ongoing work

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

Name and Address of Contractor for Communication

Others -- Name and Address of Contractor for Communication

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹7,640

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

23 Oct 2026

Download Ends

21 Oct 2026

BOQ Preview

•

CONSTRUCTION OF A LADIES TOILET IN THE OFFICE PREMISESS, INSTALLATION OF A WATER PURIFIER AND RENOVATION OF STORE ROOM WORK TO OFFICE OF THE ASSISTANT EXECUTIVE ENGINEER, SUB DIVISION MANDYA

•

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

•

Providing and fixing G.I. inlet connection for flush pipe connecting with

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC BEND

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC Elbows

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 140 mm dia PVC Tee

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 75 mm dia PVC BEND

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 75 mm dia PVC Elbows

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 75 mm dia PVC Tee

•

Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locat...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW1-GEN 2026-27_29788.docx

Tender Document • 1.17 MB

NIT_15_2026-27.pdf

Others - Tender NOTIFICATION • 0.41 MB

Ready to Participate?

Download all tender documents and submit your bid