Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.7 LAccepted-AOC GARDEN AVENUE PLOT NO 242 243 244 RH 4 SECTOR 21 NERUL NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC LOWEST TENDERER | |
| 2 | L2₹46.8 L+₹99,218 (2.16%)Rejected-Finance 601 A WING SAI PARAMOUNT APARTMENT SHRADDHA VIHAR COLONY INDIRANAGAR NASHIK NASHIK MAHARASHTRA 422009 | NASHIK | MAHARASHTRA | 422009 | L2 | Rejected-Finance GREATER THAN L1 | |
| 3 | L3₹47.4 L+₹1.6 L (3.50%)Rejected-Finance | L3 | Rejected-Finance GREATER THAN L1 | |
| 4 | L4₹47.8 L+₹1.9 L (4.23%)Rejected-Finance PLOT NO 14 NEAR BALGRAM INS SHIVAJI ROAD LONAVLA 410 401 | PUNE | MAHARASHTRA | 410401 | L4 | Rejected-Finance GREATER THAN L1 | |
| 5 | L5₹49.0 L+₹3.1 L (6.81%)Rejected-Finance 33 JAGGI GARDEN NARAINGARH ROAD AMBALA CITY 134003 | AMBALA | HARYANA | 134003 | L5 | Rejected-Finance GREATER THAN L1 |
Tender Value
₹46.9 L
EMD Value
₹93,800
Closing Date
18 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) (NAVY) LONAVLA
GE (I) (NAVY), INS SHIVAJI - POST, LONAVLA -410402
SPL REPAIRS TO CHAJJAS OF CERTAIN OTM BUILDINGS INCL ADDN/ALTN TO BLDG NO P-131 (NBCD SCHOOL), PROVN OF DEFICIENT RCC RETAINING WALL NEAR MAIN GATE AND PROVN OF ALUMINIUM GRILL IN BACKSIDE WINDOWS OF INHS KASTURI (BLDG NO P-195) AT INS SHIVAJI LONAVL
2023_MES_632439_2
GE/LONAVLA/8201/E8
Open Tender
Civil Works
Item Rate
270 days
GE (I) (NAVY) LONAVLA
As per NIT /Tender documents
6 documents required · 6 mandatory
₹500
Yes
GEINDEPNAVYLONAVLA
₹93,800
Yes
8 Mar 2024
15 Dec 2023
20 Jan 2024
15 Dec 2023
18 Jan 2024
29 Dec 2023
15 Dec 2023 - 28 Dec 2023
Amount
Completely removing existing water proofing treatment of any descriptions and any type including top layer of plaster / china mosaic wherever occurs over roof and chhajja surfaces and scrubbing the surface with wire brush and cleaning wash down with water to receive new cement plaster / PCC layer and removing the waste material / debris to a distance exc. 1500m but n.exc. 2000m etc complete all as specified and directed by Engr-in-charge.
M/L for rendering 15mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment .
Providing, cement concrete type B-0 (12.50mm graded stone agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M/L for applying oil based bituminous primer @ 0.10 Kg/Sqm providing and laying 3mm thick. APP modified water proofing membrane weighing not less than 3kg/sqm re-inforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/Sqm, tearing strength of 180N and with thermal insulation with the mineral / graved finish on upper side and laying with torches application and with 10 cm minimum lap in both direction length wise and width wise all as specified and directed by Engr-in-charge.
Providing additional reinforcement bars in place of more than 1/3 corroded reinforcement bars incl the charges for cutting bending placing and fixing in position using Lok-fix (Manufactured by M/s fosroc chemicals India ltd) including the cost of all materials labour cost of steel bars and scaffolding complete all as specified and directed by the EIC
Supplying and provisioning renderoc RG (Manufactured by M/s Fosroc chemicals Inda ltd) to an average thickness of 70 mm for beam and column fluid micro concrete shall be mixed with 6 mm down course aggregate and specified quantity of water and mixed using a power operated slow speed stirrer and pouring inside the form work and labour charges complete all as specified and directed by the EIC
Chipping, removing carefully loose plaster/hard concrete by low impact hammer without damaging the structure including cleaning and disposal of malba outside permises complete all as specified and as directed by Engr-in-charge. Note Hard concrete should not be removed by force.
M&L for cleaning reinvorcement with wire/rotary wire brush making the surface free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer confirming to ASTM B 117 on the rebars including cleaning the reinforcement wire brushing to remove loose rust spalls with time intervals of 1 hr between coats complete all as specified and as directed by Engr-in-Charge
M&L to carryout application of Bipolar migratory orrosion inhibitor EPCO KP-100 on concrete surface complete all as specified and as directed by Engr-in-Charge.
M&L for building up the profile of structural members by using latex B2 modified air cured mortar sustem damaged areas (1 cement-3 part graded preo pocked river sand 10% latex mortor by weight of cement- 0.5 w/c ratio) in 20mm thickness including levelling profiling etc complete all as specified and as directed by Engr-in-Charge.
Taking down existing doors/windows/ventilators (without taking off shutters and guard bar) of not exc. 1.5 sq. m each complete all as specifide and as directed incl stacking the materials.
Taking down Existing Aluminium windows of any size and description and refixing in same opening after repair/replacement of unserviceable fittings such as rollers /locking arrangements , neoprene beading etc to make the existing windows functional and making good disturbed surfaces all as directed by Engr-In-Charge
S&F aluminium ventilator louvered type without sash bar section as per designation 63400 of IS 737 approved by GE( minium 15 micron anodised) including necessary jointing clip, rubber packing,including necessary locking arrangement , anodised snap beading screws and 4mm thick pin headed glass etc complete
S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE.
M&L for powder coated aluminium two track, two shutters (of eqal width), sliding type windows without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings (two No's for each sliding shutters) with 4.00mm sheet glass for glazed including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20619 (ii) Frame (Top & Side)-20681 (iii) Shutter vertical (Handle lock)-20846. (iv) Shutter vertical (Int lock)-20845. (v) Shutter (Top)-20844. (vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with four shutters of equal width. (ii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window. (iii) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE
Demolition of brickwork/stone/boulder masonary built in CM including all quoins, arcdhes, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles
Demolition ofStone slabs and tiles of any description or thickness in floors, aprons etc.
M/L Brick work with sub class ‘B’ bricks on straight or curved on plan to any radius in full brick work in CM 1:6.
M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 10mm thick CM (1:6) bedding layer complete all as specified and as directed.
M&L for rendering in patches 15mm thick in CM 1:4 using ready mix plaster on external surface of nbrick walls surfaces mixed with water and all as per manufacturer instructions etc finishing the surface even and smooth without using extra cement and including taking down cement plaster on brick/concrete surfaces and racking out joints, hacking for key scrubbing down with water and necessary scaffolding etc complete allas specified and directed. Make: Ultra tech/silico/renaplast/Kaneria. Note: Pricing are inclusive all scafoldings used for upto the height of 5 mtr.
M&L Preparing newly plastered surface and priming with tow coat of cement base paint including one coat of primer complete all as specified and as directed. Note:- Pricing are inclusive all scafoldings used for uppto the height of 12 Mtr
M&L Preparation of newly plastered surface & applying 2 coat of OBD over a coat of 2 mm th wall care putty on wall.
M&L 2 coat of OBD in old painted surface including washing, rubbing down and stopping of distempered and pointed surfaces of wall
M&L Preparing old plastered surface and applying one coat of cement base paint complete all as specified and as directed. Note:- Pricing are inclusive all scafoldings used for uppto the height of 12 Mtr
M&L for painting old steel surfaces with one coat of synthetic enamel paint including preparation of any description, n.exc 10 cm in width or girth when unconnected with other painting or when pointed in a different tint.
Dismentling of CI/PVC pipes or reinforced concrete pipes 100/75 mm internal dia of pipe complete all as specified and directed.
Taking down eaves gutters and rainwate pipes( any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., incluidng cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)
S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls..
S&F PVC (SWR) bends of 110 mm dia all as specified and directed
S&F PVC (SWR) bends of 75 mm dia all as specified and directed
S&F PVC(SWR) vent cowl of 110mm dia bore.
S&F PVC(SWR) vent cowl of 75mm dia bore.
S&F PVC (SWR) 110mm dia junction (single T) equal or unequal of all as specified and directed
S&F PVC (SWR) 75mm dia junction (single T) equal or unequal of all as specified and directed
S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement
S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets,conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S&F 1.00mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed)
S&F MSA Flat wind ties for roof including securing bolts, posts and struts including all necessary drilling bolts or riveting etc and similar work confirming to FE-290 Gde E-165
M&L preparation of newly plastered surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer all as specified and as directed.
S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exceeding 5 Kg each
M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry in repair including refixing of old or damaged wooden/Mild steel batterns etc complete all as specified and as directed.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base solids all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete.
M&L M-30 with 20mm graded agg in Retaining wall, foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete
M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6
S&F MS TMT bars 10 mm dia & over, cut to length, bent to shape required including cranking and bending and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed by Engr-in-Charge.
Use and waste of form work to sides of square, rectangular or polygon in shape columns, pillars, posts, rough finished surface of concrete.
M/L Pre-cast cement concrete block masonry with Type B-1 1:2:4 (20MM graded agg) solid blocks, exc. 10 cm in width and setting in CM 1:6,complete
M & L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement.
S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16
Surface dressing n exc 30cm and average 15 cm deep in hard/dense soil
Excavating in trenches n exc 1.5m wide and n exc 1.5 mtr depth and average 1.5 mtr in depth and getting out for foundation etc in Hard/dense soil
Returning filling in sof/loose soil incl. spreading levelling watering and well ramming in layer n.exc. 25 cm thick.
Removal excavated surplus soil to a distance n.exc. 50 m and depositing where directed at level n.exc. 1.5 m above the starting point all as directed by Engr-in-Charge.
M&L for half Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in in CM 1:4
M&L for hard core of gauge n.exc. 63mm, deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone.
M&L for PCC 75mm th Cement concrete type B- 2, 1:2:4 (40mm gradedaggregate) in flooring
M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6
M&l for Glazed ceramic tiles of any colour in vertical surfaces 300 x 600x 8mm thick mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4
S & F 75 mm bore floor trap PVC (SWR ) plain with gratting including jointing with solvent cement.
S&F PVC Nahani trap100mm size with grating including hacking out cement joints and jointing to existing pipes/ waste pipe fixed in cement concrete type type B1 (1:2:4)
S & F Wash basin wall hung with half pedestal 550x400 mm as per CERA -CAT No. S2040105 wash basin and Cat No S2090102 Half pedestal including waste pipe connections and pillar tap complete all as specified
S&F two piece EWC 680x360x765mm white, with seat cover and Twin flushing cistern complete all as specified and directed by Engr-in-Charge as per CERA -CAT No. S1021103 S Trap 230mm, CAT No S1060101 Cistern, CAT No B1510101 seat cover, CAT No B1810101 Twin Flush fittings all as specified
S&F Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe.
S&F Stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.
CP hand Health faucet of brass body with wall hook and 1mtr stainless steel braided rubber hose pipe fixed in repair complete all as specified and as directed.Make: Cera Cat No F8030102 or equivalent in Hindware / Parryware.
S&F Stainless steel soap dish, white of size 160X160X90 mm as approved fixed with brass screws or embedded in wall . Make : Cera Cat No. F5003106 or equivalent in other makes as specified
S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges
S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors (Conceled where required) with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure
S&F Harrison rails,anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc
S&F Factory made single extruded WPC (Wood Polymer Composite)(Colour as approved) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
S&F Factory made single extruded WPC (Wood Polymer Composite) solid (textured finish) flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S & F 100 mm size medium weight butt hinges cold rolled mild steel
S&F mild steel barrel tower bolts, stove enameled black with bright bolt 200mm long.
S&F MS pressed handle, oval type, stove enameled black 150 mm long .
Cutting holes in brick wall or stone walls built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 or cement concrete (1:2:4), type B1 as requried for depth of embedded portion of hold fasts or lugs measured from the face of the Jamb into the wall exc half brick & n.exc one brick all as specified and as directed.
S & F Rorational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of capacity 500 ltr incl 20mm brass ball valves high pressure wwith polythene float nut fly nut complete for iron pipe or barss ferrule and fixed.
Supply only 32 mm dia PVC flush pipe or polythylene of low or high density for high level cistern.
M&L 50 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection and finished even and smooth without using extra cement.
S&F 4mm thick Non Asbestos (E-Board) designer tiles of approved design suitably fixed in false ceiling grid/frame with staples or screws complete in repair all as specified and as directed.
S&F Powder coated aluminium snap grid frame work of size 605x605mm for false ceiling all as specified
M&L Point wiring with 1.5 sqmm (nominal area) FRLS PVC insulated, multistandared, single core unsheathed, copper conductor cables passing through and incluyding providing PVC casing caping with all fittings and accessories of PVC casing caping (like TEE, bend etc) and switch piano single pole, flush type one way 230 volts complete fixed to walls/ceiling etc with and including 1.5sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box fixed with suitabe sizes cadmium plated iron screws and washers etc for mounting switches, socketrs, regulators etc complete for one light/fan/bell/buzzer point controlled by one one way switches including connecting existing panel/board complete all as specified and directed
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including wiring with switch. Make:Bajaj CAT Part No BPSLR 18W WW PRO SQ or equivalent to CG/Philips /Wipro complete all as specified and directed.
Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m including provision of cable from ceiling rose/connector to fan
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard/dense soil
S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment of FE 410-W (Gde-E-250) quality B
M&L for coloured chequered cement concrete tiles 30cm X 30cm X 25mm thick set jointed & pointed in neat cement slurry with grey cement and pigments ove 20 mm thick screed bed in CM (1:6) complete all as specified
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer?in-charge.
S&F Aluminum powder coated partitions, partly panelled & partly glazed with 12 mm thick both side laminated MDF board in bottom panel and 5mm thick tinted glass in top panel fixed with clips, aluminium beads, rubber gaskets etc., centre to centre distance of vertical member shall n.exc 1mtr and horizontal members shall n.exc 1.10 mtr using following aluminum powder coated section as mentioned in Jindal Catalogue complete all as specified & as directed :- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352
S&F powder coated Aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, 5mm th glass(Plain/frosted) and all necessary arrangements including frame for chowkate etc. complete all as specified
S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete
SAI SAMARTH ENTERPRISES
RK AND SONS CREATION
VIJAYA ENTERPRISES
Durga Enterprises
SHAILENDRA B TULSANI
ECOBUILD
JADHAV CONSTRUCTION AND INFRASTRUCTURE
KGN builders
seema enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .