REWIRING AND REPLACEMENT OF INTERNAL WIRING FITTINGS AND FIXTURES AT AF STATION UDHAMPUR

Amount

Taking down carefully aluminum/copper point wiring (light/ fan/socket or power) complete with fittings such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCBs, Main switches from control board and making good disturbed surfaces of walls, floor to match with existing specifications complete all as specified.

Point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Point wiring for one 6 Amps socket outlet on the same board controlled by one switch with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Point wiring for one 6 Amps socket outlet independent controlled by one switch with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

Description all as per serial item No.2 here-in-before but in existing concealed conduit.

Description all as per serial item No.3 here-in-before but in existing concealed conduit.

Description all as per serial item No.4 here-in-before but in existing concealed conduit.

Description all as per serial item No.5 here-in-before but in existing concealed conduit.

Switch modular type 6 AMP,one way , one module conforming to IS-3854 complete all as speciifed and as directed

Switch modular type, 16/20 Amp, one way, one module conforming to IS-3854 complete all as specified and as directed.

Socket shuttered outlet 2/3 pin, 6 Amp modular type, 2 modules complete all as specified and as directed.

Socket shuttered outlet 2/3 pin, 6/16 Amp modular type, 2 modules complete all as specified and as directed.

Modular type blanking plate, 1 module, complete all as specified and directed

Ceiling rose, surface bakelite 65 x 50mm, two to three terminals complete all as specified and as directed.

Lamp holder, insulated body, cord grip pattern SP 230 volt, complete all as specified and as directed.

Modular electronic fan regulator 2 modules rotary step type 230 volts complete all as specified and as directed.

Electric bell, AC 230 volt, single pole, Ding Dong type complete all as specified and as directed.

Modular bell push, single pole one way, 1 module, 6 Amp complete all as specified and as directed.

Vertical three phase distribution board, TPN, 4 way 440 volts having IP-54 protection, double door with provision for fixing of MCCBs as incomer and MCBs as outgoing complete after taking down existing unservicable main switch, busbar, GI box including accessories therein ,complete all as specified and as directed.Make:CAT PART NO:507680 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCB distribution board having IP-54 protection, powder coated, double door, flush mounted complete with locking arrangement suitable for 12 way SPN with 200 Amp rated bus bar 230 volt AC supply including taking down existing old unservicable including accessories therein and disposing from site complete all as specified and as directed. Make : CAT Part No : 507682 of Legrand or equivalent to Havells/ Siemens/ Schneider

MCB distribution board having IP-54 protection, powder coated, double door, flush mounted complete with locking arrangement suitable for 8 way SPN with 200 Amp rated bus bar 230 volt AC supply including taking down existing old unservicable including accessories therein,complete all as specified and as directed. Make:CAT PART NO:507682 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCB distribution board having IP-54 protection, powder coated, double door, flush mounted complete with locking arrangement suitable for 4 way SPN with 200 Amp rated bus bar 230 volt AC supply including taking down existing old unservicable including accessories therein,complete all as specified and as directed. Make:CAT PART NO:507682 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

S&F in repairs sheet metal enclosure single pole and neutral with earth metal plug and socket complete with one single pole MCB 20 Amps, 230 volts complete all as specified and as directed.

MCCB three pole 415 Volts 50 Hz 100 Amps rating with rupturing capacity not less than 16 kA, Ics = 100% Icu, adjustable thermal & adjustable megnetic settings with spreader links, copper reducer etc including taking down existing old unservicable including accessories therein , complete all as specified and as directed. Make:CAT PART NO:420085 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCCB three pole 415 Volts 50 Hz 63 Amps rating with rupturing capacity not less than 16 kA, Ics = 100% Icu, adjustable thermal & adjustable megnetic settings with spreader links, copper reducer etc including taking down existing old unservicable including accessories therein , complete all as specified and as directed. Make:CAT PART NO:420083 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCB SPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down existing old unservicable including accessories therein, complete all as specified and as directed. Make:CAT PART NO:408620 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCB SP 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down existing old unservicable including accessories therein , complete all as specified and as directed. Make:CAT PART NO:408598 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down existing old unservicable including accessories therein , complete all as specified and as directed. Make:CAT PART NO:408618 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCB SPN 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down existing old unservicable including accessories therein , complete all as specified and as directed. Make:CAT PART NO:408618 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

MCB single pole, 6-32 Amp, 240 Volts, having breaking capacity 10 kA 'C' characterstic including taking down existing old unservicable including accessories therein , complete all as specified and as directed. Make:CAT PART NO:408592 of Legrand or equavalent to HAVELLS / SIEMENS/Schneider

S&F in repairs indoor decorative extruded aluminium anodised housing/CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaire (LED batten shall be prewired box type) retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink/aluminium housing for excellent heat dissipation; 4 feet (approx) size, high efficiency electronic driver, system wattage 20 watt (lumen output not less than 2000 lumen), power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 6000K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glarefree, 0 UV radiation light fitting long life burning hours 50000 hours with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm complete all as specified.. MAKE :CAT Part No:D532065 FOR Batten and rod-P08120 of Wipro or equavalent to Havells/Philips/Crompton Note :- The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in repairs ultra bright integrated aluminium heat sink LED tube light (Single side connection) with high efficacy suited for installation in existing T8 fitting replaceable retrofit cool day white LED tube rod length 4 feet (approx) size, system wattage 20 watt (lumen output not less than 2000 lumen), power factor more than 0.9, colour temperature not less than 6000K, CRI more than 80, glarefree, 0 UV radiation light fitting long life burning hours 50000 hours complete all as specified and directed by Engineer-in-Charge MAKE :CAT Part No:TITANIANEO1213T8SSTL20WLED865SPC of Havells or equivalent to Wipro/Philips/Crompton Note :- The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in repairs ultra bright integrated aluminium heat sink LED tube light (Double side connection) with high efficacy suited for installation in existing T5 fitting replaceable retrofit cool day white LED tube rod length 4 feet (approx) size, system wattage 18 watt (lumen output not less than 1800 lumen), power factor more than 0.9, colour temperature not less than 6000K, CRI more than 80, glarefree, 0 UV radiation light fitting long life burning hours 50000 hours complete all as specified and directed by Engineer-in-Charge MAKE :CAT Part No:CRYSTAL1149T5DSTL16WLED865SGLASS of Havells or equivalent to Wipro/Philips/Crompton Note :- The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in repairs indoor decorative extruded aluminium anodised housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaire (LED batten shall be prewired box type) retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 2 feet (appx) size, high efficiency electronic driver, system wattage 10 watt (lumen output not less than 1000 lumen), power factor more than 0.9, with surge protection device minimum 2KV, color temperature not less than 6000K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glarefree, 0 UV radiation light fitting long life burning hours 50000 hours with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm complete all as specified. MAKE :CAT Part No:D531065 of wipro or equavalent to Havells/Philips/Crompton Note :- The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in repairs integrated LED bulk head luminaire fittings in engineering plastic housing with clear prismatic/opal diffuser/pressure aluminium die cast housing in white powder coating minimum IP-65 protection, system wattage 10 watt (lumen output not less than 800 lumen) power factor more than 0.9, with surge protection device minimum 2KV, color temperature not less than 6000K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, glarefree, 0 UV radiation light fitting long life burning hours 50000 hours with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm complete all as specified.MAKE :CAT Part No:DA11265 of wipro or equavalent to Havells/Philips/Crompton Note :The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in repairs Recess mounting type LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx), maximum system wattage 36 watt (cool white), minimum system lumen output 3000 lumens, CRI not less than 80, colour temperature not less than 6000 K, power factor not less than 0.95, surge protection device min 2 KV, LED driver with constant output voltage and current at input voltage of 140volt to 285 volt AC, 50 HZ, THD less than 10%, life 50,000 burning hours minimum IP protection IP 20, powder coated housing with ashthetic bottom frame, with excellent heat dissipation through high thermal conductivity, high efficiency transulence diffuser, suitable for any type of ceiling system including connection with PVC insulated copper conductor 3 core cable of 0.50 sqmm complete all as specified.MAKE :CAT Part No:CRC010R038HP57GL of wipro or equavalent to Havells/Philips/Crompton Note :The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in repairs Recess mounting type LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx) system wattage 40 watt to 45 watt (cool white), minimum system lumen efficacy not less than 80 % , CRI not less than 80, colour temperature not less than 6000 K, power factor not less than 0.95, surge protection device min 2 KV, LED driver with constant output voltage and current at input voltage of 140volt to 285 volt AC, 50 HZ, THD less than 10%, life 50,000 burning hours minimum IP protection IP 20, powder coated housing with ashthetic bottom frame, with excellent heat dissipation through high thermal conductivity, high efficiency transulence diffuser, suitable for any type of ceiling system including connection with PVC insulated copper conductor 3 core cable of 0.50 sqmm complete all as specified.MAKE :CAT Part No:D-414065 of wipro or equavalent to Havells/Philips/Crompton Note :The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in repairs Recess mounting round type LED panel of maximum system wattage 12 watt (cool white), minimum system lumen output 1200 lumens, CRI not less than 80, colour temperature not less than 6000 K, power factor not less than 0.95, surge protection device min 2 KV, LED driver with constant output voltage and current at input voltage of 140volt to 285 volt AC, 50 HZ, life 50,000 burning hours minimum IP protection IP 20 complete all as specified.MAKE :CAT Part No: LTCRSLM36WATT2X2 of C&S Electric or equivalent to Wipro/Havells/Philips/Crompton Note :The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in repairs Recess mounting round type LED panel of maximum system wattage 10 watt (cool white), minimum system lumen output 1200 lumens, CRI not less than 80, colour temperature not less than 6000 K, power factor not less than 0.95, surge protection device min 2 KV, LED driver with constant output voltage and current at input voltage of 140volt to 285 volt AC, 50 HZ, life 50,000 burning hours minimum IP protection IP 20 complete all as specified.MAKE :CAT Part No: LTCRSLM36WATT2X2 of C&S Electric or equivalent to Wipro/Havells/Philips/Crompton Note :The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in replacement LED retrofit lamp with maximum wattage 5 watt (lumen output not less than 500 lumens) with B 22 holder base with thermal conductive engineering plastic white colour housing and aluninium heat sink with specially designed fins clear/cool white, power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 6000K, CRI more than 80, LED driver with constant output voltage and current at input voltage of 140 volt to 285 volt AC at 50 Hz, glarefree, 0 UV radiation long life burning hours 50000 hours complete all as specified. (including taking down of existing serviceable/unserviceable lamps and disposing off as directed by Engineer-in-Charge). MAKE :CAT Part No:N50001 of wipro or equavalent to Havells/Philips/Crompton Note :The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

S&F in replacement LED retrofit lamp with maximum wattage 7 watt (lumen output not less than 700 lumens) with B 22 holder base with thermal conductive engineering plastic white colour housing and aluninium heat sink with specially designed fins clear/cool white, power factor more than 0.9, with surge protection device minimum 2KV, color temperature not less than 6000K, CRI more than 80, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, glarefree, 0 UV radiation long life burning hours 50000 hours complete all as specified.(including taking down of existing serviceable /unserviceable lamps and disposing off as directed by Engineer-in-Charge). MAKE :CAT Part No:N70001 of wipro or equavalent to Havells/Philips/Crompton Note :The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved.

KARAN TRADERS

MAHAJAN TRADING CO

M/S M P Construction Co

RANBIR ENTERPRISES

HIMALAYA ENTERPRISES

DAVINDER SINGH

shivom builders

R K BUILDERS