C/o Exhibition Center with Provisional of Grain Store Under Rural Urban Mission Programme in Convergence with Kisan Bhawan cum Farmer Information Advisory Center at SMF Thulel Distt. Chamba H.P.

Amount

Earth work in surface excavation by mechanical means (Hydraulic excavator/manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m,as directed by Engineer -in-charge. in column

Dry stone pitching 22.5 cm thick including supply of stone and preparing surface complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All works up to plinth level 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40 mm nominal size.

Supplying and filling in plinth with sand under floors,including watering ,ramming,consolidating and dressing complete.

Form work in centering and shuttering incliding strutting,propping etc. and removal of form for

Foundation, footing, bases of columnetc. For mass concrete

Suspended floors, roofs,landing ,balconies and access platform.

Columns, pillars, piers, abutment posts and struts.

Lintels,beams,plinth beams,girders,bressumers and cantilevers

Edges of slabs and breaks in floors and walls

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement all work upto plionth level 1:1.5:3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls (any thickness)including attached pilasters, buttresses,plinth and string courses, fillets,columns, pillers,piers, abutments, posts and struts etc. Above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams,suspended floors,roofs having slope up to 15* landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete upto above plinth level. ( Cold Twisted Bar)

Random rubble masonry with hard stone in foundation and plinth i/c levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1;6 (1 cement ;6 sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in cement mortor 1:6 (1 cement :6 corase sand)

Providing wood work in frames of doors, wondows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length(hold fast lugs or with dash fasteners shall be paid for separately).Sal Wood

Providing and fixing glazed shutters for doors, windows and clerestory wondows using 4mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class teak wood 35mm thick shutter

Providing and fixing panelled and glazed shutters for doors, windows and clerestory wondows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in- charge.Second class teak wood 35mm thick shutter

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for panelled and glazed shutters 35mm thick. Second class teak wood

Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embedding in cement concrete block30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand:6 graded stone aggregate 20 mm nominal size).

Providing and fixing M.S. Grills of required pattern in frames of windows etc. With M.S. Flats, square or round bars etc. Including priming coat with approved steel primer all complete.Fixed to opening/ wooden frames with rawl plugs screws etc.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with nuts and screws etc. Complete.250x16mm

Providing and fixing aluminium tower bolts,ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with necessary screws etc. complete.

Providing and fixing aluminium handles,ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868), transparent or dyed to required colour or shade, with necessary screws etc. complete.

Providing and fixing oxidised M.S. Casement stays (straight peg type)with necessary screws etc. Complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand)jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. complete Size of Tile 600x600x10 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer),of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting,risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)jointing with grey cement slurry @ 3.3 Kg/sqm including pointing in white cement mixed with pigments for matching shade complete Size of Tile 500x500 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipe conforming to IS : 13592Type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion, (i) single socket pipe 110mm dia

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipe conforming to IS : 13592Type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansion

single pushfit Coupler 110 mm

Bend 110mm

Shoes Plain110mm

Providing and fixing unplasticised-PVC pipe clips of approval design of unplasticised -PVC rain water pipe by mean of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortat 1:4 ( 1 cement : 4coarse sand) and making good the wall etc. complete.

Providing and fixing M.S. Fan clamp type I or II of 16 mm dia M.S. Bar, bent to shape with hooked ends in R.C.C. Slab or Beams during laying, including painting the exposed portion of loop, all as per standard design complete.

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

6mm cement plaster of mix 1 : 3 (1 cement : 3 fine sand )

20mm cement plaster of mix 1 :6( 1 cement : 6 fine sand )

Providing and applying white cement based putty of average thickness 1mm, of approval brand and manufacturer, over the plaster wall surface to prepare the surface even and smooth complete.

Finishing wall with Acrylic smooth exterior paint of required shade: New work ( Two or more coat applied @ 1.67ltr / 10sqm over and including priming coat of exterior primer applied @ 2.20 Kg / 10sqm

Distemperingwith oil bound washable distemper of approval brand and manufacture to give an even shade.New work ( two or more coats) over and including water thinnable priming coat with cement primer.

SAPAL SHARMA