Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.4 Cr
EMD Value
₹2.5 L
Closing Date
6 Feb 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Bangalore Metropolitan Transport Corporation
Srinivas
Arranging 3700 KVA HT Power Supply for Electrical Vehicle Charging Station at BMTC Depot-16, Deepanjalinagar, Bangalore
BMTC/2023-24/EL/WORK_INDENT29
BMTC/2023-24/EL/WORK_INDENT29
Open
Electrical
Two Tender Document System(Two Cover)
Bangalore Metropolitan Transport Corporation Office Bengaluru
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Should be valid registered Class-I Electrical Contractors/Firms registered in Department of Electrical Inspectorate, GoK.
Work-done Certificate for having satisfactorily completed as a prime contractor for at least one similar nature of work, i.e., HT related work not less than 50% of amount put to tender i.e., Rs. 83.00 Lakhs in last previous five years in any of the Government / Public Sector Undertaking i.e (2018-19, 2019-20, 2020-21, 2021-22 & 2022-23)
Executed in any one year (for a continuous period of 12 months) during the last five years (i.e., 2018-19, 2019-20, 2020-21, 2021-22 & 2022-23) the following minimum quantities of work in any of the Government / Public Sector Undertaking. Supply of 11 KV 3x400 Sqmm HT cable - 2.16 Kms, Laying cable through trenchless technology - 2000.00 Mtrs, Supply of RMU - 01 No. and Supply of MCVCB - 01 No.
Should have achieved in at least two financial years a minimum annual financial turnover (in all classes of electrical works only) of not less than the amount put to tender out of during the last five financial years (2018-19, 2019-20, 2020-21, 2021-22 & 2022-23). ie, Rs. 332.00 Lakhs
Liquid assets and availability of credit facilities of not less than 30% of the equivalent of the amount put to tender. ie, Rs. 49.80 Lakhs
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value.
₹3,520
₹2.5 L
30 Jan 2024
30 Jan 2024
8 Feb 2024
2 Feb 2024
2 Feb 2024
Arranging 3700 KVA HT Power Supply for Electrical Vehicle Charging Station at BMTC Depot-16, Deepanjalinagar, Bangalore
Supply, Testing and Commissioning of 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-397...
Supply, Testing and Commissioning of 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-397...
Supply, Erection, Testing and Commissioning of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 1 OD for RMU 630 Amps 39.05 as per detailed specification of B...
Supply, Erection, Testing and Commissioning of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427 4 Way RMU, 2 OD + 2 VL (One Incomer + Two Breakers + One Outgoi...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Laying of UG Cables by Trenchless Technology by adopting Horizontal Boring & Drawing of cable including preparation at site. Normal soil 5/6'' Bore Without HDPE Pipe 28.01 as per detail...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 3x300 to 3x500 Sqmm 21.03
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT Cable 3x95 to 150 Sqmm 21.01
Supply, Testing and Commissioning of Transparent Alkathine tube 19 mm dia, 2 mm thick in coils of 30 Mtr 55.01 as per detailed specification of BESCOM (Per Coil)
Supply, Testing and Commissioning of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm 45.07 as per detailed specification of BESCOM
Supply, Testing and Commissioning of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x400 Sqmm 45.06 as per detailed specification of BESCOM
Making and Fixing pot head for HT Cable only. Heat shrinkable type 3x95 to 3x150 Sqmm and 3x300 to 3x400 Sqmm 22.04 & 22.06 as per detailed specification of BESCOM
Supply, Testing and Commissioning of Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule 3x400 Sqmm 45.18 as per detailed specification of BESCOM
Making Cable Joint and wiring (for HT Cable only). Heat shrinkable Straight Through Joint 3x300 to 3x400 Sqmm 22.03 as per detailed specification of BESCOM
Supply of Cable Covering Tile 125x250x40 mm 66.01as per detailed specification of BESCOM (per 1000 tiles)
Covering cable with Tiles 27.01 as per detailed specification of BESCOM
Supply of RCC Hume Pipe 2000 mm long 150 mm Dia 68.01 as per detailed specification of BESCOM
Supply of Collars for RCC Hume Pipe 150 mm Dia 68.03 as per detailed specification of BESCOM
Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete. RCC Pipe 29.13
Supplying of M-Sand for HT cable covering. A-40/64
Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (Does not include cost of sand). 28.09
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . Th...
Supply of GI Pipe B - Class as per IS-1239 - 150 mm Dia 49.09 as per detailed specification of BESCOM
Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessar...
Supply of Caution/Danger Board 68.17 as per detailed specification of BESCOM
Fixing Danger Board 5.15
Supply of Route & Joint indicating slab with MS Anchor rod 68.08 as per detailed specification of BESCOM
Fixing of Route Joint Indicating Slab 27.02 as per detailed specification of BESCOM
Supply, Testing and Commissioning of 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 N...
Erection of HT metering Cubicle on Platform. 9.01 as per detailed specification of BESCOM
Supply, Testing and Commissioning of 11 kV, Auto Reclosures and Sectionalizers with Remote Communication Facility as per IEC-62271 GSM modem with connecting cable for remote communicating capabilities...
Erection of 11 kV Auto reclosures with control box GSM modem, connecting cable, control transformer, wiring testing and commissioning including parameterisation 12.02
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Lifting of Excess Earth up to distance of 10 KM 33.07
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 5.4
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial fi...
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., 23.07 (Per panel) as per detailed speci...
Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to ...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carria...
Supplying, testing and commissioning of 11kV MCVCB, 500MVA, 31.5 kA, 1600A feeder panel and SCADA compatible inclusive of freight and Insurance charges as per detail specification of KPTCL. 4.4
Supplying, testing and commissioning of Annunciator panel for single feeder, inclusive of freight and Insurance charges as per detail specification of KPTCL. 4.11
Supplying of 19 core 2.5 sq.mm copper control cable in existing trench inclusive of freight and Insurance charges as per detail specification of KPTCL. 13.16
Supplying of 4 core 2.5 sq.mm copper control cable in existing trench inclusive of freight and Insurance charges as per detail specification of KPTCL. 13.6
Supplying of 2 core 2.5 Sqmm copper control cable in existing trench as per KPTCL specifications 13.1
Supplying of 4 core 6 Sqmm copper control cable in existing trench as per KPTCL specifications 13.8
Supplying of Copper Control/Communication Cable for SCADA 10C x 1.5 Sq mm multistrand, conforming to KPTCL specification 24.4.2
Supplying of Copper Control/Communication Cable for SCADA Signal cable : Armoured Copper 10C x 0.5 Sq mm multistrand 24.4.1
Supplying , erection, testing and commissioning of fallowing SCADA Integration Materials as per KPTCL specifications Multi Functional Transducer(MFT) (As per DWA No: CEE/SLDC/SEE-SCADA/WA-No. S-034/2...
Do- Opto Coupler 8 out put points (As per DWA No: CEE/SLDC/SEE-SCADA/WA-No. S-034/2021-22/2713-32, dtd: 24-12-2021)
Laying of control cables from equipments to control panel. 22b
Supply, Testing and Commissioning of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x400 Sqmm 45.09 as per detailed specification of BESCOM
Supplying and installation of RUBBER MAT 1mtr x 1mtr -10mm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications. 15.117
Supply of Double Pole TC Set with RCC Poles - 9 Mtr Long, 145 Kg WL - GI 21.04
Erection of 2 Pole Structure using RCC/PSCC Pole 9 to 10 Mtr long 2.06
Supply of 11 kV, 400 Amps Double Break GOS
(Dwg No. BESCOM/GM/QS&S/22 Dtd 24.11.2018) 13.03
Fixing of GOS including wiring (11 kV Double Break 400 Amps) 13.03
Lightning Arrestor 9 kV, 5 kA Metal Oxide Ceramic Type with ground disconnector (3 Nos) [BESCOM SR Sl No 196 item No 23.01]
Fixing of 3 Nos Lightning Arrestor including wiring 13.06
Supplying and stringing of Coyote ACSR (26/2.54 mm Al + 7/1.90 mm St), Std Wt: 521 Kg/KM 20.6 as per detailed specification of KPTCL
Supply of H - Frame Set for fixing 11 kV, GOS - (For DP structure for providing New GOS for sectionalisation) - GI 24.07
11 kV, Horizontal Cross Arm - Mild Steel (MS)
(Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) 2.01
11 kV Ceramic Pin Insulator with GI pins
Grounding of equipment by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mts long with 2 part clamo out of G.I flat 50X6mm continuously welded around the pipe using cast iron welding electr...
Grounding of equipments with 50X6mm G.I.Flat & connecting equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending,twisting,drilling of holes & connecting by...
Supplying grounding name plate, including danger plate, inclusive of freight and Insurance charges as per detail specification of KPTCL.
Erection, alignment and fixing to the foundation, indoor/outdoor 11kV switchgear Panel/unit including movement from the point of unloading to the point of erection, as per KPTCL Specifications an dir...
Wiring and assisting in testing and commissioning (switch gear panel)
Testing and Commissioning, Wiring, Identification, ferruling crimpling & termination of wires in breaker and wiring upto control panels/relay panels. Testing of Relays, CT's, PT's and Breaker for oper...
Configuration of RTU & Engineering along with validation of data at SLDC as per KPTCL Specifications an direstion of KPTCL Authorities.
Miscellaneous (wiring, ferruling, Naming of 11KV panel, extension of line diagram in Station Single line Diagram, etc..) complete job as per KPTCL Specifications an direction of KPTCL Authorities
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Notification_31.doc
Others - Tender Notification • 0.14 MB
Tender_Format.docx
Others - Tender Format • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .