Set Up of Digital Library w...

Amount

Cabin Desk Providing and Placing Cabin Table .Table Dimensions as mentioned below. Main Table - 1500 mmL x 700mm W x750mm Ht. Worktop shall be made up of 25mm thick prelaminated finish partical board of approved shade. The bottom shall have backing laminate. The Working and Nonworking edges shall be provided with hot pressed 2mm thick PVC edging using special hot melt glue at high temperature. Modesty panels is in 18mm thk prelaminated finish. Wire routing / wire management groumets shall be provided on main Table. Fliptop cover shall be provided on main table with cable tray below table to mount switches along with metal riser for verticle cable movement. Side Storage of size 900mm L x 450mm D x 680mm Ht is a combination of open shelves and hinged door unit and is made of 18mm thick prelaminated finish finish partical Board conforming to IS : 12823. All storage to be lockable with single key system. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco. The System should carry 3 Year Warranty.

Meeting Table Supplying and installation of meeting table of size : W1800mm x D700mm x H730 mm. Table top having thickness of 25mm, constructed of prelaminated particleboard covered with low pressure laminate (LPL). The understructure is made of MS powder coated egs. All the edges are provided with machine pressed 2 mm thick PVC edge band. Fliptop cover shall be provided on main table with wire management system is with Cable Trays running under the worktop to carry Data and Electrical wires and Switches and Sockets are to be fixed by customer on slots provided in Cable Trays. Cable Raisers are installed at junction points only where cables are entering the system from Floor into the cable Tray. All metal parts are duly powder coated. Fabric tackable screen to be provided between adjacent workstation above the table top with option of writing marker board. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco or equivalent.

Linear Workstations with screen Supplying and installation of Linear shaped workstation of size : W750mm x D600mm x H1050 mm. Main table is W750mm x D600mm x H730mm Table top having thickness of 25mm, constructed of prelaminated particleboard covered with low pressure laminate (LPL). The understructure is made of MS powder coated egs. All the edges are provided with machine pressed 2 mm thick PVC edge band. Fliptop cover shall be provided on main table with wire management system is with Cable Trays running under the worktop to carry Data and Electrical wires and Switches and Sockets are to be fixed by customer on slots provided in Cable Trays. Cable Raisers are installed at junction points only where cables are entering the system from Floor into the cable Tray. All metal parts are duly powder coated. Fabric tackable screen to be provided between adjacent workstation above the table top with option of writing marker board. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco or equivalent. Center screen of length 600mm on workstations in tackable fabrics with thickness of at least 20mm. Height of screen to be 300mm above table top

Library Table Providing and Placing library carrel table .Table Dimensions as mentioned below. Main Table - 750 mmL x 600mm W x1200mm Ht. Worktop shall be made up of 25mm thick prelaminated finish partical board of approved shade. The bottom shall have backing laminate. The legs and Modesty panels are made in 18mm thk prelaminated particle board finish. Wire routing / wire management groumets shall be provided on main Table with cable tray below table to mount switches along with flexxible snake for verticle cable movement. All the exposed edges are with 2mm PVC egde banding and sealed edges are with 0.8mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco. The System should carry 3 Year Warranty.

Linear workstations Supplying and installation of Linear shaped workstation of size : W750mm x D600mm x H1050 mm. Main table is W750mm x D600mm x H730mm Table top having thickness of 25mm, constructed of particleboard covered with low pressure laminate (LPL). The understructure is made of MS powder coated egs. All the edges are provided with machine pressed 2 mm thick PVC edge band. Fliptop cover shall be provided on main table with wire management system is with Cable Trays running under the worktop to carry Data and Electrical wires and Switches and Sockets are to be fixed by customer on slots provided in Cable Trays. Cable Raisers are installed at junction points only where cables are entering the system from Floor into the cable Tray. All metal parts are duly powder coated. Fabric tackable screen to be provided between adjacent workstation above the table top with option of writing marker board. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco or equivalent. Warranty 3 Years

Reception Table Manufacture, supply and placing in position Reception Counter L shaped of size of L3000mmX L1050mm x D750 x H950/750mm.The basic structure shall be made of flexi ply and 17mm thick plyboard. Worktop 18mm thick made out of plyboard finished with approved 1mm thick laminate. The work top shall be of divided in two heights of 950 and 750mm. The 950mm counter top and front shall be of 18mm thick plywood with 1mm laminate. The 750mm counter top and sides shall be of 18mm thick plywood with 1mm laminate finish. Inside of counter shall be finished with approved laminate 1mm thickness. The expose edges shall be finished with PVC/ABS edge lipping of 2mm and unexposed 0.8mm lipping. Side Storage of size 1800mm L x 600mm D x 750mm Ht is a combination of open shelves and hinged door unit and is made of 18mm thick prelaminated finish finish partical Board conforming to IS : 12823. All storage to be lockable with single key system. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco. The System should carry 3 Year Warranty. Warranty 1 yea

2 Drawer pedestal Mobile pedestal cabinet, support A4 and F4 file storage, equipped with weight-rated castors and full extension ball bearing slides for all drawers, anti tilt system security, fifth castor to support lower drawer weight, increased frame’s structural stability, available key lock. The pedestal body and drawers are made out of prelaminated particle board. The 2-drawer unit shall be of size 400x400x400mmht

Sofa 3 seater Manufacturing, supplying and placing in position three seater sofa of size 1800mm w x 800mm d x 800mm ± 10% as per indicative image mentioned in the tender documents. Wooden structure of sofa to be fabricated of good quality hardwood and plywood duly seasoned and applying anti-termite paint of approved brand and manufacture to ensure stability of the frame along with solid wooden legs in white ash / Oak / maple / Sheesham. The wooden base frame of the sofa to be provided seat, back and sides with moulded polyurethane foam padding upholstered with fabric of approved sample of desired shade and finished with thick markin cloth before doing final upholstery. sofa padding with PU foam 40 Kg/cum density, chesterfield back. Sofa to be fully upholstered using approved Fabric of desired shade including providing and fixing of all other related required materials including hardwires complete as per indicative image mentioned in the tender documents and as directed by the Engineer-in-Charge. (Basic rate of fabirc, Rs500 /-per rmt. of 1.2M.wide F.O.R at site excluding GST.)

Coffee Table Supply and placing in position Table as per the image with the following requirements / specifications mentioned in brief: Tables of size 50 (W) X 500 (D) X 600 (H) as per indicative image mentioned in the tender documents. The table consists of two worktops made out of 25mm thick laminated particle board. Understructure made out of 18mm thick laminated particle board. All complete as per predications, tender drawings, Reference images, approved samples/shop drawings and direction of Engineer - In - Charge

Library Books Racks Manufacture, supply and placing in position of free standing bookrack of size L2550mmxD450mmxH2000mm with body and shelves made out 18mm thick prelaminated particle board and back in 9mm thick prelaminated particle board. The units are assembled by knock down

Library Books Rack Manufacture, supply and placing in position of free standing bookrack of size L3300mmxD450mmxH2000mm with body and shelves made out 18mm thick prelaminated particle board and back in 9mm thick prelaminated particle board. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco or equivalent. The System should carry 3 Year Warranty.

Task Chair Providing and placing 360° revolving chair having in-built features like synchro Tilt Synchronous Mechanism with tilt tension adjustment , Upright position locking, Seat Height Adjustment, Armrests adjustable. The specification required should conform as given below : SEAT ASSEMBLY: The seat is made out of flat plywood, upholstered with moulded polyurethane form and fabric Seat Fabric to be made out of Composition 100% polyester. BACK ASSEMBLY: The two part assembly upholstered with Mesh fabric is made up of back outer injection moulded in Nylon and back inner injection moulded in Nylon. The back consist of adjustable Lumbar support made of injection moulded nylon. ARMRESTS: HEIGHT ADJUSTABLE ARMRESTS: It is made up of glass filled Polyamide arm structure with PU armtop and height adjustments PNEUMATIC HEIGHT ADJUSTMENT: The adjustment range should be 90-100mm PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass filled Nylon and fitted with 5no. Twin wheel castor. TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in Black nylon.

Executive Task Chairs Providing and placing 360° revolving chair having in-built features like synchro Tilt Synchronous Mechanism with tilt tension adjustment , Upright position locking, Seat Height Adjustment, Armrests adjustable and headrest. The specification required should conform as given below : SEAT ASSEMBLY: The seat is made out of flat plywood, upholstered with moulded polyurethane form and fabric Seat Fabric to be made out of Composition 100% polyester. BACK ASSEMBLY: The two part assembly upholstered with Mesh fabric is made up of back outer injection moulded in Nylon and back inner injection moulded in Nylon. The back consist of adjustable Lumbar support made of injection moulded nylon. ARMRESTS: HEIGHT ADJUSTABLE ARMRESTS: It is made up of glass filled Polyamide arm structure with PU armtop and height adjustments PNEUMATIC HEIGHT ADJUSTMENT: The adjustment range should be 90-100mm PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass filled Nylon and fitted with 5no. Twin wheel castor. TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in Black nylon.

Table Arm Chair Supplying of chair with single piece Polypropylene molded seat and back. Base is 4 legged MS 1.6mm thick powder coated with laminated half tablet arm. SEAT HEIGHT 440 mm BACK HEIGHT 890 mm SEAT WIDTH 460 mm x SEAT DEPTH 660 mm OVERALL WIDTH with TABLET 560mm Tolerance plus -10% Warranty 1 year

Record Room unit Manufacture, supply and placing in position of L shaped storage unit of height 1980mm. The length of unit shall be 915x485mm with depth 450mm. Body and shelves made out 18mm thick prelaminated particle board and back in 9mm thick prelaminated particle board. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Ebco or equivalent. The System should carry 3 Year Warranty

Providing and laying Vitrified tiles in approved finish (polished/satin/ antiskid Finish as approved) in flooring, treads of steps and other similar locations with different sizes (thickness to be specified by the manufacturer), confirming to IS: 15622, of approved brand and manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc. all complete as per drawing and Engineer in Charge. Size of tile 600x600mm ( Minimum Basic rate of vitrified tile Rs. 830/- per Sqm)

Providing manual glass doors of singl leaf of Max Width 1100 mm and Max Height 2400 mmwith S/S patch fitting: frameless partitions with 10 / 12 mm clear toughened glass with (PT standard). Patch fittings such as PT-24-top pivot, PT-20-top patch, PT-10-bottom patch, US 10 corner lock with EPC, lock keeper plate`H` pull handle TGDI-H-450 (450 mm x 25 mm) and floor spring BTS75V conforming to DIN EN1154 with adjustable spring strength EN(1-4). The above work complete in all respect as per approved drawings and to the satisfaction of engineer-incharge / architect consultant.

Providing manual glass doors of Double leaf of Max Width 1200 mm and Max Height 2400 mmwith S/S patch fitting: frameless partitions with 10 / 12 mm clear toughened glass with (PT standard). Patch fittings such as PT-24-top pivot, PT-20-top patch, PT-10-bottom patch, US 10 corner lock with EPC, lock keeper plate`H` pull handle TGDI-H-450 (450 mm x 25 mm) and floor spring BTS75V conforming to DIN EN1154 with adjustable spring strength EN(1-4). The above work complete in all respect as per approved drawings and to the satisfaction of engineer-incharge / architect consultant.

Providing and fixing 12mm thk. Toughened glass partitions with glazing cut and fixed in openings of desired shape as per drawing with 3/4` beveling all around, fixed with the help of SS patch fittings, with top and bottom `C` channels, fixed firmly to the slab/ MS Structure ,as directed by Engineer in Charge. Area of openings to be measured). Assume frameless glass. Rate of above item to include P/F of : 20x20mm `C` channel SS patch Fittings.

Providing and pasting 3.5-4mm thick veneer ply confirming to IS 1328 (type-I) on required surface with approved adhesive all complete as per drawing, specifications and direction of Engineer in charge

Providing and fixing wall/column paneling with 3.5-4mm thick veneer of approved make and as per approved pattern fixed with approved adhesive over backing of 12 mm thick MDF board exterior grade I- ISI marked with internal Kiln seasoned and chemically treated hollock wood hard wood frame of adequate and approved section and size. Hard wood framework shall be treated with anti-termite and fire retardant paint. All the edges of veneer should be eased with maple wood, including making cut outs for electrical switches and appliances etc., all complete as per architectural drawings and direction of Engineer in Charge

Providing and fixing fabric paneling with Approved Fabric over 6mm thick foam, both wrapped over 9 mm thick tacable board which is pasted with approved adhesive over a base of 12mm exterior grade (Grade I) MDF board confirming to IS: 14587 duly anchored to internal Kiln seasoned and chemically treated hollock wood hard wood frame of adequate and approved section and size. Hard wood framework shall be treated with anti-termite and fire retardant paint, including making necessary groove, all complete as per drawings and direction of Engineer in Charge. The fabric shall have minimum weight of 340( plus /- 5%)gm/m (for width 1.40m), abrasion value of 50,000 cycles or more, flammability as per BS EN 1021-1:1994 (Cigarette) or equivalent fastness to light 5 or better as per BS 1006 or equivalent, Fastness to rubbing 4.5-5 (Minimum basic rate of fabric shall be Rs 190/- per running meter, considering fabric width of 1.4m).

Supply, Installation, Testing and Commissioning of 86` Interactive monitor diagonal 86`, operating system android 9 with quad core processor, Resolution 3840 x 2160(16:9- UHD) or Better, Brightness 400cd/m2 or Higher, Panel Technology IPS / VA, Viewing Angle 178 x 178, Response Time 8 ms or better, 2x 20 watt speaker, RAM 4 , Storage 64 GB , Input : HDMI x 3, 1x USB A 3.0, 1x USB B 2.0 for touch, 1x USB A 2.0, 1x USB C 3.0 ( Touch plus data plus Charging), 1x micro SD( Up to 1 TB), 1x ops slot, HDMI Out and Audio Out, IR Touch technology with 20 points touch , External controol through RS 232, Built in Wifi and Bluetooth, Life min. 50,000 hrs or more, 4mm tempered anti glare hardness.

Wall mount for display

Supply, installation, testing and commissioning of Wall Mountable Multidriver (8 or better) vocal range line-array column speaker. The louspeaker shall meet the following performance criteria: Frequncy Range (-10 dB) of 100Hz - 16 kHz or better. Long term power handling of 300 Watts or more. The Loudspeaker shall have a Max. SPL (Peak) of )=119dB with a senstivity of 88 dB SPL and a dispersion of 130° H x 20° V or better. The loudspeaker system shall have a norminal impedence of 8 ohms. Optional 70/100V OEM transformer module with tap settings shall be available.

SITC of Class D configurable amplifier with total 2 x 600W output power or better across 2 outputs, 4/8ohms, 70/100 Volt or mixed use operation: Frequency Response : 20Hz - 20kHz for LZ mode :THD (0.04% at rated output

Supply, Installation, Testing and Commissioning of wireless lavalier mic including receiver, bodypack transmitter, lavalier microphone, Frequency range 470.2 - 526 MHz, 520 - 576 MHz, 552 - 607.8 MHz,606.2 - 662 MHz 630 - 662 MHz, 662 - 693.8 MHz, 823.2 - 831.8 MHz and 863.2 - 864.8 MHz, 925.2 - 937.3 MHz, 1785.2 - 1799.8 MHz, Operating temperature -10 °C - plus 55 °C, Audio frequency response 20 Hz - 20 kHz (-3 dB) @ 3 dBfs, Max. sound pressure level 130 dB.

Premium 8-Input 2-Bus Mixer with XENYX Mic Preamps and British EQs

Supply Installation Supply, Installation, Testing and Commissioning of 4x2 HDMI 2.0 matrix switcher 4K60 4:4:4 / HDR 18G 4x2 Matrix switcher with ARC, audio de-embedding, Down Scaling, IR, TCP/IP, and RS232 Control, Analog and digital audio de-embedded from output 1, Built in auto down scaling on each output.

Supply, Installation, Testing and Commissioning of4K 10.2G 70M HDMI Wall Plate extender set

SITC of HDMI 2.0 HDBaseT Extension Set, Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 70m (4K 40m / 1080P 70m), Complete set Includes TX, RX, power supply, and IR flasher/emitter, Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant, Flexible power design (use power supply at TX or RX)

8U Rack to place the above equipment

Supply, installation, testing and commissioning of Set of 1 Nos. 15 KVA UPS. Each UPS of 50 KVA should have following specifications in addition to tender requirements : True online double conversions, IGBT Rectifier and inverter based UPS. Three phases Input/ three phase output with SMF batteries complete with MS Fabricated battery rack to accomodate the all battery system, Suitable for 30 Min backup on Full load at 0.8 Load P.f., with 40 nos. 150AH Battery with Each UPS, Input voltage operations on mains without switch over to battery : 340-478V at 100% load, 220-478 V @ 50% load. Input power factor 0.99 @ 100% linear load, input THDi less than 5% @ 100% linear load. Output THD is less than 3% for full linear load and Less than 5 % for nonlinear load. Crest factor 3:1, over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. Battery Flexible design shall be available from 32 to 40. Battery type should be Valve regulated lead-acid (VRLA). Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface, Dust Filter at Air Inlet point are required. UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. LCD Display indicating all important parameters. To improve the UPS Security over LAN/WAN the SNMP card provided with UPS shall be having Cybersecurity enhancements for UL 2900-2-2 certification, including stronger encryption, configurable password policy. The card shall work on GIGABIT Speed and should support all major protocols : Gigabit ETHERNET, 10/100/1000 Mbits, autonegotiation, Protocol Support HTTP, HTTPS 1.1, TLS 1.2, SNMP V1, SNMP V3, NTP,TFTP, SMTP, SMTPS BOOTHP/DHCP IP v6 Telnet, CLI, SSH, ARP. UPS shall be provided with Temperature Humidity Sensors to monitor Temperature and Humidity over LAN. Battery open rack with top cover, battery interlinks battery breaker, battery to UPS cable as required should be provided with UPS systems. UPS system shall be parallelable upto 6 units in case required in future. Each UPS shall be compatible for working in parallel redundant mode with other.

Supplying, installation, testing and commissioning of Race way made from minimum 2.0 mm thick GI raceway, factory fabricated, with internal partition of the following sizes including providing removable double folded cover of 2.0 mm thick , knock out holes and fixing accessories and coupling, earthing stud for terminating 8 SWG copper earth wire complete as required. 150 mm wide x38 mm deep in ceiling/floor

Supplying, installation, testing and commissioning of Race way made from minimum 2.0 mm thick GI raceway, factory fabricated, with internal partition of the following sizes including providing removable double folded cover of 2.0 mm thick , knock out holes and fixing accessories and coupling, earthing stud for terminating 8 SWG copper earth wire complete as required. 225 mm wide x38 mm deep in ceiling/floor

Supplying, installation, testing and commissioning of Race way made from minimum 2.0 mm thick GI raceway, factory fabricated, with internal partition of the following sizes including providing removable double folded cover of 2.0 mm thick , knock out holes and fixing accessories and coupling, earthing stud for terminating 8 SWG copper earth wire complete as required. 300 mm wide x38 mm deep in ceiling/floor

Supplying Installation testing and Commissioning of Small Form Factor Pluggable 1 Gigabit Ethernet (SFP plus ) SR Optics.

Supplying and Fixing of Floor Standing Network/Server Rack - 32U / 800w / 800d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top and Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. With a Overall Weight Carrying Capicity of 500Kgs. Side Panels - 42U/800d Front MS Door Perforated honeycomb 42U/800w Rear MS Door Split Perforated honeycomb 42U/800wFan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Vertical Cable manager 80mmW 42U Shelf, Stationery 700mm N/W PDU 12Sockets 5/15Amps with MCB Mounting Hardware (Pkt. Of 20) earthing Kit 150mmH Cable manager 1U MS with Loops complete in all respect.

Supply fitting, fixing and testing of 9 U Wall mount rack of Width (mm)-600, Depth (mm) - 500, Approx.Net Wt (kg) - 20, CRCA `D` Grade thickness (mm) - 1.2, Powder Colour for Cabinet - RAL9002, Glass - 4mm Toughened Tinted Glass Door, Accessories:, Fan and with all required acessories.

Supply, installation, testing and Commissioning of 8(2X4) modules brushed brass/copper colour pop-up boxes.(Make-Legrand, model No.-0540 18)(All switch socket, DATA outlet, telephone etc are considered separately)

Supply, installation, testing and Commissioning of 1 module Female BNC 75 jack(Make- Legrand, Model No.- 5722 76) for pop up box.

Supply, installation, testing and Commissioning of 2 Module Female HD15(VGA)(Make- Legrand, Model No.- 5722 82) for pop up box.

Supply, installation, testing and Commissioning of 2 ModuleHDMI socket (Make- Legrand, Model No.- 5722 81) for pop up box.

Supply, installation, testing and Commissioning of 1 Module USB charger 1000mA (Make- Legrand, Model No.- 5736 21)

Supply, Installation, Testing and Commissioning of various types of bulk connectors and cables as per site requirements

Supply, Installation, testing and commissioning of 1.5 TR Hi Wall type split air-conditioning unit suitable to operate from 230 plus -10% volts, 50HZ, 1phase power suppl, with air cooled evaporator with coil, fan and fan motor, air cooled condenser with hermetically sealed rotary/scroll compressor, condenser coil, propeller fans controls, contol panels, including control wiring, necessary power cable MS frmae duly painted to locate outdoor unit etc. The unit should be at least 5 star rated. The refrigerant pipe size and gas quality should suits to the copper pipe length at actual. The capacity guarantee should be ensured by the vender.

Supply, Installation, testing of Refrigerant piping (total circuit including liquid and suction) with interconnecting cable between indoor/outdoor unit as per site incharge, 13mm thick EPDM/Nitrile rubber insulation on pipes, gas charging support complete in all respects for 1.5 TR Split AC

Voltage Stablizer Supply, Installation, testing and Commissioning of automatic voltage stablizer with inbuilt time delay relley suitable to operate on 230/-10% volt 50HZ, three phase power supply with digital of voltage and Ampere for input and output power complete as required.

Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, internal discharge tube, discharge nozzle, suspension bracket, conforming to IS 2878, finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. Capacity 4.5 KG Co2

Providing and Fixing of stored pressure Fire Extinguisher ABC powder type (Mono Ammonium Phosphate Powder) Magnetic Pressure Gauge having the facility to check at site, Discharge Time less than 9 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 21A, B Rating 55B as per BS EN-3 BIS 15683 marked, Can Construction : Deep drawn and CO2 Mig welded, Valve Construction : Forging and Machining, Internal Coating of Can : Epoxy Powder coating, External Coating ofCan : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, Helium LeakDetection Tested, Warranty. Capacity 6 Kg

Supply Installation Testing and Commissioning of All-in-One Computer following specification: 13th Gen Intel Core i5-1335U, 8 GB DDR4, 512GB SSD, display size 23.8inch(60.5 cm), Wireess Keyboard and Mouse Combo,Windows 11 with pre loaded MC office latest version

Supply Installation testing and Commissioning of HP Laserjet M1005 Multifunction Laser Printer (Black)

Supply of Library Books as per requirement

Supply of Night vision CCTV cameras with remote access, DVR, HDD, Cable, wifi and accessories of reputed make with minimum two years warranty

Bidder Name

Amount

The Bharti Coop L and C Society Ltd (GSTN-NA) BID ID -1161748

THE DINOD JAI BALA JI COOP MULTIPURPOSE SOCIETY (GSTN-NA) BID ID -1163651

THE SHIV SHAKTI CO-OP MULTIPURPOSE SOCIETY LTD. (GSTN-NA) BID ID -1162618

THE SHIV SHAKTI CO-OP MULTIPURPOSE SOCIETY LTD. (BID ID -1162618)

THE DINOD JAI BALA JI COOP MULTIPURPOSE SOCIETY (BID ID -1163651)

THE SHIV SHAKTI CO-OP MULTIPURPOSE SOCIETY LTD. (BID ID -1162618)

THE DINOD JAI BALA JI COOP MULTIPURPOSE SOCIETY (BID ID -1163651)