RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate Bid to RA enabled No High Pressure Breathing Air Compressor Motor Driven ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Objective of Portable High Pressure Breathing Air Compressor 9-10 cfm Motor Driven Portable High Pressure Breathing Air Compressor Motor Driven for SCUBA Diving
RequiredFire Fighting & Rescue Services Industrial Breathing Air Safety System
RequiredMilitary
RequiredPaintball High Pressure Pneumatic Testing of Valves and Portable High Pressure Breathing Air Compressor Motor Driven for SCUBA Diving
RequiredFire Fighting & Rescue Services Industrial Breathing Air Safety System
RequiredMilitary
RequiredPaintball High Pressure Pneumatic Testing of Valves and 1/6 similar components similar components Referred Indian Standard Specification Generally Conforming to IS 15879 latest Generally Conforming to IS 15879 latest CONSTRUCTION Selectable pressure control switch on compressor YES * Pressure switch Type Dial Gauge Pressure Switch on Compressor * Charging adapter for fire fighting Standard DIN adapter of 300 bar for charging for fire fighting breathing apparatus cylinder Standard DIN adapter of 200 bar for charging for fire fighting breathing apparatus cylinder
RequiredStandard DIN adapter of 300 bar for charging for fire fighting breathing apparatus cylinder Charging adapter for under water diving Special adopter of 232 bar to charge under water diving breathing air cylinder Special adopter of 232 bar to charge under water diving breathing air cylinder Built in Immediate and Final Pressure safety valve YES * Two charging hoses
Requiredone with adopter for 300 bar and other with adopter of 200 bar along with special adopter for 232 bar with safety valves suitable to fill two cylinders at 200 bar or one at 300 bar and one at 232 bar YES * Repair/Tool Kit YES * Compressor lubricating system splash type * Provision of full range of automated controled devices to monitor both compressor and working conditions YES * Start
RequiredStop and Emergency Stop butons on control panel of compressor YES * Shut-Down Switches for ease of system diagnosis and YES * 2/6 maintenance
Requiredthe low oil pressure and high pressure air shut-down switches shall be equipped with suitable connectors Feature for auto drain of Moisture/Oil in the system to drain in a tank at regular interval without release of Oil Contaminated air to atmosphere YES * Interstage control device YES * Final stage pressure gauge YES * Power supply 3 phase/400-415V/50Hz * Prime Mover-Electrical Motor AC electric motor be as per IS996 or IS 325 latest or equivalent standard * Electric Motor Power (must declare) 2.2 * Type/Class of Motor enclosure - * Degree of protection (IP Rating) of Motor - * Spare filter cartridge 2 SETS * One oil Refill YES * General arrangement drawing to be provided YES * Commissioning and Training at site YES * Operation manual with maintenance and repair instruction to be included YES * Timer with inbuilt temp sensor for checking or indicating filter life Yes Yes PERFORMANCE Maximum Operating Pressure(must declare) 120 Up to 140 Cylinder Charging Range 200 bar
Required232 bar
Required300 bar selectable 200 bar
Required232 bar
Required300 bar selectable 3/6 Cylinder charging Rate 9-10 cmf (260 ≤ N≤ 300 lpm) 9-10 cmf (260 ≤ N≤ 300 lpm) Breathing air filteration system to be provided at intake and at final point of use to ensure highest level of purity of air delivered as per DIN12021 or CGA-E or any equivalent international standard * O2 concentration by volume in Breathing air (%) 20 * Carbon mono oxide in Breathing air (ppm) 5 * Watervapor in Breathing Air 35 ppm at cylinder outlet (cylinder pressure >20 MPa (g) * Oil components (Condensed hydrocatbons) (mg/m³) 0.1 * Odour
Requiredflavour substances and taste Free of any significant odour or taste * Light weight
RequiredRugged
RequiredTransportable equipment of modular design YES * Equipment weight (must declare) 175 175 - 225 Noise level at one meter distanc (dba) 62 * CERTIFICATION Availability of Type Test Report to prove conformity of declared parameters to the specification from any ILAC/NABL accredited/Central Govt Lab YES * Test Report Number and Date - * Name of the Lab where test Conducted - * Product Warranty (Years) 3 3 Service Warranty for Parts from date installation (Years) 5 5 * Bold specifications are the golden parameters. 4/6 * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
