PROVN OF TOILET WITH ALLIED INFRA FOR COCKREL CSD CANTEEN AND SECURITY LIGHTS IN UNIT AREA AT RAMESHWARAM LINES AT RANCHI MIL STN UNDER GE RANCHI

Amount

Surface dressing n.exc 15cm deep getting out in soft/loose soil, complete all as specified and directed.

Surface excavation n.exc 30cm deep and average 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

Rough excavation not exc 1.5m deep and getting out in soft/ loose soil, complete all as specified and directed.

Rough excavation exc. 1.5m but n.exc 3.0m deep and getting out in soft/ loose soil, complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out soft/loose soil, complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil, complete all as specified and directed.

Removing excavated materials not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil, complete all as specified and directed.

M&L for broken bricks hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, complete all as specified and directed.

M&L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

S&F Powder coated GI frame work for false ceiling of size of grid 605 x 605mm (consisting of angle or tee section size 24 x 24 x 1.5mm thick angle section and 24 x 32 x 1.5 mm Tee Section) Powder coated GI snap grid hanging with 02 mm dia GI hanger/wire fixed with steel dashed fastners, complete all as specified and directed.

M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping, complete all as specified and directed.

M&L for PCC type D2 1:4:8 (using 40mm graded stone agg) as in foundation, filling and mass, complete all as specified and directed.

M&L for 75mm thick PCC type D2, 1:4:8 (using 40mm graded stone agg) as in sub base floor surface, complete all as specified and directed.

M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement, complete all as specified and directed.

M&L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in beam, cantilevers,bressummers,lintle over 1.5m span etc, complete all as specified and directed.

M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc, complete all as specified and directed.

Providing PCC jallies type B0,1:2:4 (12.5mm graded aggregate), 25mm thick, incl all moulding but excluding frame set in CM 1:4, complete all as specified and directed.

M&L for 40mm thick cement concrete type B0 1:2:4 (20 mm graded aggreate) as in damp proof course etc similar work, complete all as specified and directed.

Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per squarw meter and blinding with clean dry sand @ 0.05 cum per sqm, complete all as specified and directed.

M&L for PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains, complete all as specified and directed.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc, complete all as specified and directed.

Use & waste frame work to soffits of suspended slab such as floor or roof slab, chajjas and similar work not exc 200 mm thick (Horizontal or slopeing) rough finished, complete all as specified and directed.

S&F Pre-painted galvalum alm zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws as specified.

M&L 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even, complete all as specified and directed.

M&L Non - skid Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and directed.

M&L for Chequered cement concrete tiles (20x20x25)mm thick, set, jointed and pointed in neat grey cement slurry in floors, complete all as specified and directed.

M&L 10mm thick rendering as screed bed or bedding layer of mortar in CM (1:4) for lying floor finishes and surface fair and even, complete all as specified and directed.

M&L glazed ceramic coloured tiles of size 350 X 250 X 7mm/ 450 x 350 x 7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 200x200X 7mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and directed.

M&L brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as specified and directed.

M & L Brick wk with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/ septic tank/ soakwell etc. in sewer works in CM 1:4, complete all as specified and directed.

M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4, complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & even complete. (WPC will be paid saperatelly), complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:3) with applying water proofing compound (As per manufrature instruction) surface finished fair & even, complete all as specified and directed. (WPC will be paid saperatelly)

Supply only liquid water proofing compound.

M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to, complete all as specified and directed.

All as per item No 39 above but 6mm to 8mm dia.

S&Fsolid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg, complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing, complete all as specified and directed.

S & F 75mm Butt hinges extrucded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21, complete all as specified and directed.

S&F of 100 mm size aluminium handles cast type anodised, complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

S & F 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

S & F, 25mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 25 mm bore pipe, complete all as specified and directed.

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm bore pipe, complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubberring joints, laid in trenches or in floors, complete all as specified and directed.

S&F PVC bends any radius 110 mm dia.

S&F PVC bends any radius 75 mm dia.

S&F PVC vent cowl any radius 75 mm dia.

M&L for 150mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under, andhaunching against the sides of pipes after they are laid and testedf in cement concrete 1:4:8 type D2, complete all as specified and directed.

S&F vitreous china bowl urinal half stall type, white with grating and union for discharge pipe type complete including providing and fixing plugs, complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe, complete all as specified and directed.

S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets or erecting stand and making necessary arrangement for fixing, complete all as specified and directed.

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor, complete all as specified and directed.

S&F 110mm PVC (SWR) WC connector bent type, complete all as specified and directed.

S&F 10 ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket, complete all as specified and directed.

S&F 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends, complete all as specified and directed.

S&F 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F 32 mm dia waste/flush pipe for urinal and WHB, complete all as specified and directed.

Supply only 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.

M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

M&L PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.

M & L preparation of new surface of wall and applying three coat of white wash, complete all as specified and directed.

M & L preparation of new surface of wall and applying two coat of cement base paint, in any colour, complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described.

S&F 32mm dia bore Bottle trap of PTMT having minimum water seal of 25mm. (minimum weight 32mm-260gms/ 40mm-270gms, complete all as specified and directed.

M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) as bedding layer including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required, complete all as specified and directed.

S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A, complete all as specified and directed.

S&F Flat iron/ angle iron, complete all as specified and directed.

Material and labour for point wiring (concealed) with 1.5 Sqmm PVC insulated FR unseathed multi stranded copper conductor cable 1100 volts confirming to IS-694-1990 and one run continious earth wire with 1.5 Sqmm stranded core PVC insulated unsheathed FR copper conductor confirming to IS-6941990 in PVC Conduit concealed type incl PVC conduit/fitting etc, modular MS boxes, complete all as specified and directed. Make:- Havells/Finolex/Anchor (a) One light/fan/ Exhaust point controlled by one one way switches.

S&F ceiling rose surface bakelite 65x50mm three terminal AC 230 volts, complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 5 Amp. Make :- Havells / Legrand / Anchor

S&F modular white cover plate with frame, 2 module. Make : Anchor/Legrand/Havells (Crabtree)

S&F modular white cover plate with frame,3 module. Make : Anchor/Legrand/Havells (Crabtree)

S&F modular white cover plate with frame,8 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers. Make :- Anchor / Legrand/ Havells.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. Make :- Havells / CG /Bajaj

Supply and fix 1100 volts grade heavy duty PVC insulated aluminium conductor, served with inner sheathing of PVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable of size 6 Sqmm multi -strand, complete all as specified and directed. Make : Havells/Polycab/Finolex

M&L for House service bracket (hook type complete with 3.0 m long G.I. pipe 40mm dia med. grade, two nos 90° bends. M.S. hook and stay or guy, complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed. Make :- Havells /Anchor/Schneider

S&F sheet metal enclosure fo DBs for using MCBs single pole and neutral 8 Way double door with 200 amp rated bus bar 240 V, complete all as specified and directed. Make :- Havells /Anchor /Schneider

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and directed.

S&F tubes,' medium grade', galvanized, with all fittings; laid in trenches of following sizes :-

25 mm bore dia

20 mm bore dia

S & F in replacement of Gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm dia bore, complete all as specified and directed.

S & F in replacement of Gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm dia bore, complete all as specified and directed.

S&F LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed. Make :-Havells / Bajaj / CG

S & F in replacement Led Street light luminaries fittings 60 Watt green line a road lighting luminaries with high power LED and unique Peanut to ensure uniform light distribution , higher spacing between poles and maintenance free system. Make- Crompton/Philips/ Havells

S&F in replacement of flexible wire twin core copper conductor of size 23/ 0.0076 for fans and fluorescent tube light, pendant fittings connection upto 1.50 mtr length, all as specified and as directed.

M & L in replacement of GI Tube suitable size, clamp, bracket for fitting including nuts, bolts, complete all as specified and directed.

M & L DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 6/10 sqmm 2/4 core and fixed to the GI pipe 50 mm dia by means of suitable size of clamps with nut and bolts and incl provn for fixing 01 No MCB TP 32amps, 10 KA = 01 No & 01 No of single pole MCBs 6-32 amps,10KA inside the box, complete all as specified and directed.

M/s Dwarika Nath Singh