Loading
Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹42.8 L |
Tender Value
₹78.3 L
EMD Value
₹1.6 L
Closing Date
16 Mar 2026, 4:00 pmClosed
NISHANT
PROJECT DIRECTOR
BUIDCO, WEST BORING CANAL ROAD, RAJAPUR PUL, 800001
NISHANT
PROJECT DIRECTOR
Annual repair, operation & maintenance of Storm Drainage Pumping Station 11( I) Sinchai Bhawan, 11 (2) Vikash Bhawan, 11 (3) High Court & 11 (4) MLA Flat DPS under Nutan Anchal, Patna West (Mecanical) Works Division, BUIDCo, Patna for the years as session 2026-27
126868
03 /Mech/PW/2026-27 (Group - 11)
Open Tender
MECHANICAL
Patna
• Company Name
• Address
• Mobile No. and Email ID
• PAN No. and GST No
• Registration Details
MECHANICAL
ITEM RATE
L1
1
15 documents required · 15 mandatory
₹17,700
Processing Fee: 3540
₹1.6 L
Chief General Manager, Buidco, Patna
8 Jul 2026
7 Mar 2026
17 Mar 2026
7 Mar 2026
16 Mar 2026
7 Mar 2026
9 Mar 2026
NIT-03/Mech/PW/2026-27 Group-11
Name of Work:-Annual repair, operation & maintenance of Storm Drainage Pumping Station 11( I) Sinchai Bhawan, 11 (2) Vikash Bhawan, 11 (3) High Court & 11 (4) MLA Flat DPS under Nutan Anchal, Patna West (Mecanical) Works Division, BUIDCo, Patna for the years as session 2026-27 .
Estimated Cost (Rs.) Rs. 78,26,695.00
Earnest Money (Rs.) Rs. 1,56,600.00
Time of initial inspection & testing of thorough repaired all machineries. 15th May 2026
Cost of BOQ (Rs.) Rs. 17,700.00
To be filled by the Bidder
1 Name of the Contractor/Bidder
2 Address of the Contractor/Bidder
Gr. 11 (1) Name of work- Estimate for Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant SINCHAI BHAWAN under Mech. works division Buidco, patna for monsoon' 2026 as session 2026-27.(01 April 2026 to 31 March 2027.)
SI No Particulars of work Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs)
Rate In Figure Rate In Word
1 Pump Set-7.5 HP Sub., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 2 Job 0.00 0.00
2 Repairing and overhauling of 12 HP FASD air break Starter & control panel for 7.5 HP Sub operation ( As per Annexure -01A) 2 Job 0.00 0.00
3 Spray painting over double coat of paint with red oxide primer of all existing MS structure & all electromechanical equipments by removing old paint etc as required. 1 job 0.00
4 Cost for providing the construction of 08 m deep earth station as per standard with connection of all electromechanical equipments with recessing GI flat & GI wire as per direction of Engineer in charge 1 Job 0.00
5 Cleaning & Desilting of circular sump & intake in premises of the DPS (As per Annexure - 02) 1 job 0.00 0.00
6 Complete the below mention mix work as per instruction of Engineer-In-Charge :-
a Writing the name details of officers & pump operator, sweeper on the wall paint. 1 Job 0.00
b Providing log book & other required Register.
c Providing & Installation Of Fire Extinguisher as per Requirement.
d Providing & availability 24 x 365 days during monsoon period in sufficient qty required safety materials & others required as per instruction of Engineer-In-Charge.
7 Cost for making and fitting of water level gauge etc as per required. 1 Job 0.00
8 Deployment of 1 no.x 3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June 2026 to 15th Oct. 2026 and 1 no. x 1 shift from 01.04.2026 to 31.05.2026 & 16.10.2026 to 31.03.2027 (639 shift ) 639 shift 0.00
9 Deployment of 02 nos. x 03 shifts pump operators during the period 1st June 2026 to 15th Oct. 2026 and 1 no. x 3 shift from 01.04.2026 to 31.05.2026 & 16.10.2026 to 31.03.2027 (1506 shift 1506 shift 0.00
10 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at storm drainage pumping plant Sinchai Bhawan DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, Spray Painting of all existing MS structure,transportation and loading, unloading of any equipment, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge essential spare like as fuse wire, MCCB, gland packing, greese,mobil, bearing, coupling, coupling-bolt, nut-bolt of different size, AVF digital volt meter (96mm²) , and essential tools like wrinch, hammer, screw driver ,adjustable wrinch etc. as per Direction of E/I. 1 Job 0.00
Name of work - Estimate for repairing and servicing of 7.5 HP CF pump and motor
sl. No. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount
Rate In Figure Rate In Word
1 Cost for providing all labours, tools and tackles at site for dissconnecting the 10HP submersible pump set and taking out 7.5 HP sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00
2 Cost for opening and dismentling of 7.5 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00
4 cost for supplying and fitting deep grooved single row bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00
5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00
6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00
7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00
8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00
9 cost for supplying following :- 0.00
mobil 5 ltr 0.00
servo bearing grease 1.5 kg 0.00
nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00
10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00
11 Cost for assembly of all parts of 7.5 HP submersible pump at workshop including all labour tool and tackles. 1 Job 0.00
12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00
Name of work - Repairing of 12HP Starter cum control panel for operation of 7.5 HP sub motor
SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)
Rate In Figure Rate In Word
1 Providing all Labours,tool & tackles for repairing of 7.5 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.
Contactor 25 amp 1 no. 0.00
Timer (0-30)sec 1 no. 0.00
Push Button 2 nos. 0.00
2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.
Selector switch 16 Amp 1 nos. 0.00
Bus-bar 400mm x 5mm thick 3 nos. 0.00
Total Cost - 0.00
Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)
Rate Analysis:- Rate In Figure Rate In Word
Sinchai Bhawan DPS
1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank of Sinchai Bhawan DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. (i) Circular sump of radious -9' ,Height of Mud (Approx) - 3' , volume of mud to be removed from the sump=3.14 x 9.0' x 9.0' x 3.0' = 763.02 cft = 21.60 m³ P/M³ 21.60 0.00
Total mud=21.60 m³
Gr.11 (2) Name of work- Estimate for Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant VIKASH BHAWAN under Mech. works division Buidco, patna for monsoon' 2026 for the year 2026-27 (1 st April 2026 to 31 March 2027 ).
SI No Particulars of work Qty Unit Rate In Rs. (To be filled by the Bidder) Amount (in Rs)
Rate In Figure Rate In Word
1 Pump Set-7.5 HP Sub., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 2 Job 0.00 0.00
2 Repairing and overhauling of 12 HP FASD air break Starter & control panel for 7.5 HP Sub operation ( As per Annexure -01A) 2 Job 0.00 0.00
3 Spray painting over double coat of paint with red oxide primer of all existing MS structure & all electromechanical equipments by removing old paint etc as required. 1 job 0.00
4 Cleaning & Desilting of Existing sump at DPS by removing mud and disposal of the same to away from The Dps.(As per Annexure - 02) 1 job 0.00 0.00
5 Complete the below mention mix work as per instruction of Engineer-In-Charge :-
a Providing & Installation Of Fire Extinguisher as per Requirement. 1 set 0.00
b Providing & instalation of name plate of Buidco.
c Writing the name details of officers & Pump operator, Sweeper on the wall with paint.
d Providing log book & other required Register.
e Providing & availability 24 x 365 days during monsoon period in sufficient qty required safety materials & others required as per instruction of Engineer-In-Charge.
6 Cost for making and fitting of water level gauge etc as per required. 1 Job 0.00
7 Deployment of 01 no.x3 shifts road sweepers for removing floating materials from sump, cleaning the premises, taking out the garbages from pump impeller and miscellaneous work during the monsoon period 1st June to 15th Oct. 2026 and 1 no. x 1 shift from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (639 shift) 639 shift 0.00
8 Cost for the deployment of Highly Skilled Pump operators 02 nos.x 03 shift per day from 1st June 2026 to 15th Oct. 2026 and 1 no. x 3 shift from 16.10.2026 to 31.03.2027 & 01.04.2026 to 31.05.2026 (1506 shift) 1506 shift 0.00
9 Maintenance of miscllaneous work of all Electro machineries for the period of (01.04.2026 to 31.03.2027) at Vikash Bhawan DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, transportation and loading, unloading of any equipment/material, repairing of civil structure during emergency for water draining, functionality of CCTV with recharge etc. as per Direction of E/I. 1 Job 0.00
Name of work - Estimate for repairing and servicing of 7.5 HP CF pump and motor
sl. No. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount
Rate In Figure Rate In Word
1 Cost for providing all labours, tools and tackles at site for dissconnecting the 10HP submersible pump set and taking out 7.5 HP sub. Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00
2 Cost for opening and dismentling of 7.5 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00
4 cost for supplying and fitting deep grooved single row bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00
5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00
6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00
7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00
8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00
9 cost for supplying following :- 0.00
mobil 5 ltr 0.00
servo bearing grease 1.5 kg 0.00
nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00
10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00
11 Cost for assembly of all parts of 7.5 HP submersible pump at workshop including all labour tool and tackles. 1 Job 0.00
12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00
Name of work - Repairing of 12HP Starter cum control panel for operation of 7.5 HP sub motor
SI.No Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)
Rate In Figure Rate In Word
1 Providing all Labours,tool & tackles for repairing of 7.5 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.
Contactor 25 amp 1 no. 0.00
Timer (0-30)sec 1 no. 0.00
Push Button 2 nos. 0.00
2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.
Selector switch 16 Amp 1 nos. 0.00
Bus-bar 400mm x 5mm thick 3 nos. 0.00
Total Cost - Total Cost 0.00
Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)
Rate In Figure Rate In Word
Vikash Bhawan DPS
1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank of Vikash Bhawan DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. (i) Circular sump of radious -7.5' ,Height of Mud (Approx) - 4' , volume of mud to be removed from the sump=3.14 x 7.5' x 7.5' x 4.0' = 706.5 cft = 20.00 m³ P/M³ 20.00 0.00
Total mud=20.00 m³
Say That RS. 0.00
Gr.11 (3) Name of Work- Annual repairing,overhauling,servicing ,operation & maintenance of all electromechanical equipments of Storm Drainage Pumping Station HIGH COURT DPS under Nutan Rajdhani Anchal, Works Division, BUIDCo, Patna for the monsoon year 2026-27 .( From 01st April 2026 to 31st March 2027 )
SI No Particulars of work Qty Unit Rate In Rs. (To be filled by the Bidder) Total Amount (in Rs)
Rate In Figure Rate In Word
1 Pump Set-7.5 HP Sub., Running at 3Ø ,f=50 Hz volt=440 V ( As per Annexure -01) 2 Job 0.00 0.00
2 Repairing and overhauling of 12 HP FASD air break Starter & control panel for 7.5 HP Sub operation ( As per Annexure -01A) 2 Job 0.00 0.00
3 Pump Set-7.5 HP C/F, Running at 3Ø ,f=50 Hz volt=440 V ( As per Annexure -02) 1 Job 0.00
4 Repairing and overhauling of 7.5 HP FASD air break Starter & control panel for 7.5 HP C/F operation ( As per Annexure -02A) 1 Job 0.00 0.00
5 Complete repairing & servicing of 5 HP C/F Diese Pump Set. 1 Job 0.00
6 Cleaning & Desilting of Existing sump at DPS by removing mud . ( Silt volume in to the Sump(approx) = 3.14*5'*5'*4'= 314cft = 8.89m³ ) 8.89 m³ 0.00
7 Cost for making and fitting of water level gauge etc as per required. 1 Job 0.00
8 Spray painting over double coat of paint with red oxide primer of all existing MS structure & all electromechanical equipments by removing old paint etc as required. 1 job 0.00
9 Deployment of 01 nos.x 3 shifts Highly Skilled Technician cum pump operators during period 1st April 2026 to 31st May 2026 , 02 nos. x 03 shifts from 01.06.2026 to 15.10.2026 and 01 nos.x 3 shifts from 16.10.2026 to 31.03.2027 1506 P/Staff 0.00
10 Deployment of 01nos.x 01 shifts Road sweepars during period 1st April 2026 to 31st May 2026 , 01 nos. x 02 shifts from 01.06.2026 to 15.10.2026 and 01 nos.x 01 shifts from 16.10.2026 to 31.03.2027 502 P/Staff 0.00
11 Maintenance of miscllaneous work of all Electro machanical equipment (electrical/mechanical/electronics) for the period of (01.04.2026 to 31.03.2027) at the DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing or supplying like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, transportation and loading, unloading of any equipment/material, repairing of civil structure during emergency for water draining , Name plate of BUIDCO,Writing the name details of officers & pump operator, sweeper on the wall paint.,logbook and other required registers ,fire extingusher, availability of 24 hrs. x 365 days in sufficient quantity of safety material, umbrella(02nos), torch,first aid kit box,rain coat,etc. as per Direction of E/I. Payment will be made only if work other than the above 10 items is done. 1 job (lumpsum) 0.00
(1) Name of work - Estimate for repairing and servicing of 7.5 HP Sub pump and motor
Sl. No. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)
Rate In Figure Rate In Word
1 Cost for providing all labours, tools and tackles at site for dissconnecting the 7.5 HP sub. pump set and taking out the Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00
2 Cost for opening and dismentling of 7.5 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00
3 cost for S/F double row angular contact bearing of appropriate no and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00
4 cost for S/F deep grooved single row bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00
5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00
6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00
7 cost forS/F nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00
8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00
9 cost for supplying following :- 0.00
mobil 5 ltr 0.00
servo bearing grease 1.5 kg 0.00
nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00
10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00
11 Cost for assembly of all parts of 7.5 HP submersible pump at workshop . 1 Job 0.00
12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00
Name of work - Repairing of 12HP Starter cum control panel for operation of 7.5 HP sub motor
SI.No. Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)
Rate In Figure Rate In Word
1 Providing all Labours,tool & tackles for repairing of 7.5 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.
Contactor 25 amp 1 no. 0.00
Timer (0-30)sec 1 no. 0.00
C T Coil 100/5 3 no. 0.00
Single phase preventer 1 no. 0.00
Push Button 2 nos. 0.00
2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.
Selector switch 16 Amp 1 nos. 0.00
Bus-bar 400mm x 5mm thick 3 nos. 0.00
Total Cost - 0.00
Name of work - Estimate for repairing and servicing of 7.5 HP CF pump and motor
Sl. Particulars QTY. Unit Rate In Rs. (To be filled by the Bidder) Amount(Rs)
Rate In Figure Rate In Word
1 Cost for providing all labours, tools and tackles at site for opening all coupling bolts of 7.5 HP CF pump from motor and all electrical connection of motor and opening all nut and bolt of pump casing, from suction line and delivery line and from foundation . 1 job 0.00
2 Cost for providing labour, tools and tackles for transportation of motor pump and its accessories loading and unloading from DPS to workshop and back to pump house after repairing work with the help of hydra/crane, pickup van and all necessary to complete job. 1 job 0.00
3 Cost for complete opening of 7.5 HP C/F motor part by part & taken out of DE & NDE bearing from bearing houshing and repairing of bearing houshing with welding with C.I electrode, turning, and finishing as required shape and size including cost of hiring charge of welding machine, labour, tool & tackles all complete job. 1 job 0.00
4 Cost for supplying and fitting bearing of apropriate no. for DE, if required including all labour tools and tackles 1 nos. 0.00
5 Cost for supplying and fitting bearing of apropriate no for NDE, if required including all labour tools and tackles 1 nos. 0.00
6 Cost for greasing bearing and taping, heating & varnishing of enamelled copper winding wire including required materials like grease and varnish including all labours, tools and tackles etc. 1 job 0.00
7 Cost for reassembling of rotor & stator of motor and also fitting of bearing in the bearing houshing at repairing place including labour, tools & tackles etc. 1 job 0.00
8 Cost for dismentalling of all nut & bolt of pump casing, pump with pump shaft, bearing housing from pump casing including all labour, tools & tackles etc. 1 job 0.00
9 Cost for re-metaling, turning and polishing of SS 410 pump shaft and rethreading two points & straightening the shaft by hydraulic pressure machine including all labour, tools & tackles etc. 1 job 0.00
10 Cost for supply and fitting of bronze bush including cutting, turning, polishing and finishing of size 1 no. 0.00
50 mm ID x 74 mm OD x 150 mm Length
11 Cost for supply and fitting of deep groove ball bearing of apropriateno. for 7.5 HP Electric pump with GST,CP & labour cess etc 2 nos 0.00
12 Cost for supply and fitting of thrust bearing apropriate no. in DE for7.5 HP Electric pump with GST,CP & labour cess etc 1 nos 0.00
13 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00
14 Cost for making, supplying and fitting impeller steel key, lock screw and lock washer made of SS 316 with full thread. 1 nos 0.00
15 Cost for supplying and fitting of mechanical seal, oil seal, 'O' rings, water deflector, lantern ring, hexa nut for gland packing, oil filler plug including labour, tools and tackles etc. 1 job 0.00
16 Cost for supplying and fitting lock nut and lock washer for bearing including labour, tools and tackles. 1 Set 0.00
17 Cost for fitting consumable materials such as grease, gland packing 5/8”, cotton waste, packing paper, flexible rubber water thrower etc as required at the time of fitting of pump. 1 job. 0.00
18 Cost for supplying all labours, tools & tackles at workshop for reassembling of bearing housing along with impeller with pump casing and tightening all holding bolts and nuts of pump casing, checking alignment of pump bearing housing, etc all complete. 1 job. 0.00
19 providing all labours, tools, tackles for installation of 7.5 HP motor & C/F pump on foundation,refitting nut-bolt & testing on load at DPS. 1 job. 0.00
20 Deduct : Cost of Scrap materials of bronze 4 Kg 0.00
Total Cost 0.00
Name of work - Repairing of FASD air break Starter cum control panel for operation of 7.5 HP CF motor
Sl.No. Particular Qty UNIT Rate In Rs. (To be filled by the Bidder) Amount(RS)
Rate In Figure Rate In Word
1 Providing all Labours,tool & tackles for repairing of 15HP fully starter, panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.
Contactor 65 amp 1 no. 0.00
Timer (0-30)sec 1 no. 0.00
Thermal Over load relay unit having (37.6-60) Amp contactor mounting 1 no. 0.00
Push Button 2 nos. 0.00
C.T Coil 100/5 3 nos. 0.00
Selector switch 16 Amp 1 nos. 0.00
Phase indicating lamp 3 nos. 0.00
Single phase preventer 1 no. 0.00
Total Cost - 0.00
Gr.11 (4) Name of Work- Annual repairing,overhauling,servicing ,operation & maintenance of all electromechanical equipments of Storm Drainage Pumping Station MLA FLAT DPS under Nutan Rajdhani Anchal, Works Division, BUIDCo, Patna for the monsoon year 2026-27 ( From 01st April 2026 to 31st March'27)
SI No Particulars of work Qty Unit Rate In Rs. (To be filled by the Bidder) Total Amount (in Rs)
Rate In Figure Rate In Word
1 Pump Set-7.5 HP Sub., Running at 3Ø ,f=50 Hz volt=440 V (As per Annexure - 01) 2 Job 0.00 0.00
2 Repairing and overhauling of 12 HP FASD air break Starter & control panel for 7.5 HP Sub operation ( As per Annexure -01A) 2 Job 0.00 0.00
3 Spray painting over double coat of paint with red oxide primer of all existing MS structure & all electromechanical equipments by removing old paint etc as required. 1 job 0.00
4 Cleaning & Desilting of Existing sump at DPS by removing mud . ( As per Annexure -02) 1 job 0.00 0.00
5 Cost for making and fitting of water level gauge etc as per required. 1 Job 0.00
6 Deployment of 01 nos.x 3 shifts Highly Skilled Technician cum pump operators during period 1st April 2026 to 31st March 2027. 1095 P/Staff 0.00
7 Deployment of 01nos.x 02 shifts Road sweepars during period 1st April 2026 to 31st May 2026 , 01 nos. x03 shifts from 01.06.2026 to 15.10.2026 and 01 nos.x 02 shifts from 16.10.2026 to 31.03.2027 867 P/Staff 0.00
8 Maintenance of miscllaneous work of all Electro machanical equipment (electrical/mechanical/electronics) for the period of (01.04.2026 to 31.03.2027) at the DPS.The Bidder shall be totally responsible for Proper Functioning of DPS with immediate minor & major work repairing or supplying like burning of motor, transformer, panel, starters, Pump operation, Functionality of Sluice gate & any other equipments installed or to be install should be Functional in this DPS, Cleaning of Campus, Sprinkling of Bleaching Powder, proper flood light, fan, chair, rubber mat, transportation and loading, unloading of any equipment/material, repairing of civil structure during emergency for water draining , Name plate of BUIDCO,Writing the name details of officers & pump operator, sweeper on the wall paint.,logbook and other required registers ,fire extingusher, availability of 24 hrs. x365 days in sufficient quantity of safety material, umbrella(02nos), torch,first aid kit box,rain coat,etc. as per Direction of E/I. Payment will be made only if work other than the above 07 items is done. 1 Job 0.00
(1) Name of work - Estimate for repairing and servicing of 7.5 HP Sub pump and motor
sl. No. Particulars Qty Unit Rate In Rs. (To be filled by the Bidder) Amount
Rate In Figure Rate In Word
1 Cost for providing all labours, tools and tackles at site for dissconnecting the 7.5 HP sub. pump set and taking out the Pump set from sump house and loading on pickup van for transportation of pump motor assembly from site to work shop for repairing work including hydra/crane 1 Job 0.00
2 Cost for opening and dismentling of 7.5 HP sub. Motor pump assembly and taking out impeller from motor pump assembly. 1 Job 0.00
3 cost for supplying and fitting double row angular contact bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00
4 cost for supplying and fitting deep grooved single row bearing of appropriate no. and providing proper maintenance of bearing housing, bearing bush and greesing all complete job. 1 no. 0.00
5 Cost for varnishing and heating of stator to required level of insulation and inspecting the insulation level at regular interval for 36 hours 1 Job 0.00
6 cost for supplying and fitting copper cable socket, cable entry kit 2 nos. 0.00
7 cost for supplying and fitting nitril rubber 'o' rings, joint rubber gasket, lip seal, spring washer, neck ring including labour tool and tackles 1 no. 0.00
8 cost for making, supplying and fitting mechanical lock, mechanical seal (motor side) and primary seal (pump side) including labour, tool and tackles all complete job. 1 set 0.00
9 cost for supplying following :- 0.00
mobil 5 ltr 0.00
servo bearing grease 1.5 kg 0.00
nuts, bolts and key of different sizes i.e. dome type, hex nut bolt etc. 1 set 0.00
10 Repairing of impeller by gas welding at damaged portion, turning, polishing, finishing including supplying all labour, tools and tackles, welding machine hiring, electrode and all consumable items (if required) as per direction of E/I. 1 job 0.00
11 Cost for assembly of all parts of 7.5 HP submersible pump at workshop including all labour tool and tackles. 1 Job 0.00
12 cost for transportation of pump motor assembly from workshop to pump house after repair including all cost of labour for loading and providing all labours, tools and tackles at site for lowering of motor pump assembly, fitting and fixing of pump motor assembly to dischage pipe and testing on full load. 1 job 0.00
Name of work - Repairing of 12HP Starter cum control panel for operation of 7.5 HP sub motor
SI.No. Particular Qty Unit Rate In Rs. (To be filled by the Bidder) Amount(RS)
Rate In Figure Rate In Word
1 Providing all Labours,tool & tackles for repairing of 7.5 HP fully automatic star - delta air break starter cum panel with supply,changing and fitting contactor, timer, over load realy unit, push botton and changing all internal wiring with suitable PVC Wire & strip as required.
Contactor 25 amp 1 no. 0.00
Timer (0-30)sec 1 no. 0.00
C T Coil 100/5 3 no. 0.00
Single phase preventer 1 no. 0.00
Push Button 2 nos. 0.00
2 Reparing of Panel with changing and fitting, selector switch, copper strip bus bar, pilot lamp, MCCB and changing all interval wiring etc. all complete.
Selector switch 16 Amp 1 nos. 0.00
Bus-bar 400mm x 5mm thick 3 nos. 0.00
Total Cost - 0.00
Sl. No. Description of work Qty. Unit Rate In Rs. (To be filled by the Bidder) Amount (Rs)
Rate In Figure Rate In Word
1 Cost for supplying all laours, tools and suitable tackles for cleaning & desilting of filled and Choked sump tank of MLA FLAT DPS and to lift and disposal of all soils and materials all complete as per specification and direction of E/I at site. (i) Circular sump of radious -7.5' ,Height of Mud (Approx) - 4' , volume of mud to be removed from the sump=3.14 x 7.5' x 7.5' x 4.0' = 706.5cft = 20.00 m³ P/M³ 20.00 0.00
Total mud=20.00 m³
Sl. No. Abstract Amount
1 Estimate for Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant SINCHAI BHAWAN under Mech. works division Buidco, patna for monsoon' 2026 as session 2026-27.(01 April 2026 to 31 March 2027.) 0.00
2 Estimate for Annual repairing and maintenance of all electro-mechanical accessories of the pumps set installed in sewerage drainag pumping plant VIKASH BHAWAN under Mech. works division Buidco, patna for monsoon' 2026 for the year 2026-27 (1 st April 2026 to 31 March 2027 ). 0.00
3 Annual repairing,overhauling,servicing ,operation & maintenance of all electromechanical equipments of Storm Drainage Pumping Station HIGH COURT DPS under Nutan Rajdhani Anchal, Works Division, BUIDCo, Patna for the monsoon year 2026-27 .( From 01st April 2026 to 31st March 2027 ) 0.00
4 Annual repairing,overhauling,servicing ,operation & maintenance of all electromechanical equipments of Storm Drainage Pumping Station MLA FLAT DPS under Nutan Rajdhani Anchal, Works Division, BUIDCo, Patna for the monsoon year 2026-27 ( From 01st April 2026 to 31st March'27) 0.00
Project Director (Mech.)
Patna West (Mech.)
Works Division, Buidco, Patna.
aoc.json
Purchase Order
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT 03 MWZ.pdf
NIT • 2.92 MB
FINANCIAL G11.xlsx
NIT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .