ELECTRIC WORK

Amount

fo|qr forj.k [k.M&’k’Ve] cqyUn”kgj ds dk;Z{ks= esa fo0fo0m0[k0&izFke] vkSjxkackn@f}rh;] VkaM+k] cqyUn”kgj ds vUrxZr iw.kZ tek ;kstuk en esa izkUrh; [k.M yksd fuekZ.k foHkkx] ty thou fe”ku@vU; ljdkjh foHkkxksa }kjk izsf’kr vkosnukuqlkj la;kstu fuxZr djus gsrq ykbZu fuekZ.k vkfn dk;ZA

Carriage of fallowings from ESC. BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 60 Kms.

PCC Pole 8.5 mtr Long.

S.T Pole 11/13 Mtr. Long

Carriage of All line Material from store center BSR to at site ACSR Weasel conductor, ABC 4 condictor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Erection of Single pole support including complete IT fittings with channelas per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of 11/13Mtr. STP Double pole/Scation Pole support including complete IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of 8.5 Mtr. Pcc Double pole/Scation Pole support including complete IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8=30x3030 cms. including the cost of cement, sand, birck hallast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Double pole support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8=30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Cutting/drilling/fabrication of channel and angleWelding of MS Angle iron for making guarding angle size 65x65x6/50x50x6 mm including the work of fixing the bracket on PCC/ST pole for construction of the line.

Carriage and mounting of 10/25/63 KVA T/F fallowings from ESC. BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, requried for proper completion of work, distance about to 60 Kms.

Instalation of10/25/63/100 KVA T/F.

fixing of 11 Kv Stay rod with Stay wire in proper way with Nozelling.

Grouting of 11 Kv Stay rods.

fixing of 33 Kv Stay rod with Stay wire in proper way with Nozelling.

Grouting of 33 Kv Stay rods.

Carriage of 11 kv CT/PT metering pole mounted unit various ratio

Carriage and installation 11 kv pilferresistant metering cubicle with out cable termination kit.

Mounting of 11 kv CT/PT metering pole mounted unit various ratio

Laying, sagging. Stringing and binding and jumpering of ACSR Weisal, rabbit, dog newly erected pole as per RESPO manual and as per direction of supervising engineer. It

Fixing of Earthing Complete

ACSR weasel/ rabbit conductor

Laying of ABC cable size 3x50 sq. mm

Laying of ABC cable size 3x95/3x120 sq. mm

Laying of LT cable size 1x16/1x40 sq. mm

Fixing of 11 Kv DP Fues Set

Fixing of Droper Channel/Top Chennal/T-off chennel.

Fixing of 11 Kv Pin Insulator with pin and nut

Fixing of 11 Kv Disc Insulator with fitting

Fixing of TF Base Angle/bracing

Fixing of Distribution Box Three/Singal Phase

Complete Guarding

Fixing of 11 Kv Cross Arm

Laying of 11 kv XLPE cable of various size via Cutt-open method.

Fixing of 33 Kv Cross Arm

Laying of 33 kv XLPE cable by cutt-open method.

Filling and Instalation of 11/33 Kv Cable Jointing kit Varies Size.

Painting of STP Pole with primer & paint

Dismenteling of line work

Receive back of old material from site to store bsr

The folloing material is required to be Providing & Fixing by contractor

Danger Board with clamps

Holding/DP clamp.

F-Bracket with clamps

Barbed Wire

MS nut & Bolt off size.

J Hook

PG Clamp

LT Insulator

Suspension Clamp

LT Clamp

Paint & Primer

M S Enterprises (BID ID -4717876)

M/S RAGHAV and BROTHERS (BID ID -4717912)