SPL REPAIR TO BLDG NO P92 (OR MD ACCN) AT MIL STN GAYA

Amount

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M & L for point wiring using approved colour coding as per IS with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one way switch 5 Amps

(b) One exhaust fan/ceiling fan point controlled by one, one way switch 5 Amps

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

(e) One bell point controlled by one switch

Description all as per item No 4 here-in-before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F modular switch piano flush type, single pole, one way and 5/6 Amp single module complete.

S & F modular switch piano flush type, single pole, one way and 15/16 Amp single module complete.

S & F modular socket outlet multipurpose with provision of 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete.

S & F modular socket outlet multipurpose with provision of 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete.

S & F modular switch piano bell push type, single pole, one way and 5/6 Amp single module complete.

S & F ding dong buzzer call bell complete all as specified and directed .

S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.

S & F modular white cover plate with frame 3 module

S & F modular white cover plate with frame 6/8 module

S & F modular metal flush box for 3 module

S & F modular metal flush box for 6/8 module

M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix MCCB Distribution board double door made out of CRCA mild steel sheet surfce with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface/concealed mounting vertical TPN 4 way, 440 volts with bus bar rating 200 Amps (vertical operation) and suitble size of cable gland -02 Nos, dust and vermin proof suitable for incorporation of MCCB 4 pole 125 amps 16 kA and MCB's and making all necessary connections complete all as specified and directed at site.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Re-fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories complete all as specified and as directed.

Re-fixing of xhaust fan of 250 mm sweep made of plastic/steel body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed.

S & F in replacement LED lights fitting 1x 20W 220V, polycarbonate LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, complete all as specified and as directed.

S & F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete with all accessories internally pre wired and necessary mounting arrangements complete all as specified and directed.

S & F building security light fitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note: GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm x 3.5 Core passing through GI pipe in trench including necessary connection with lugs and cable gland etc complete all as specified and directed.

Galvanised iron steel tubes, ISI marked light grade of size 40mm bore for cable protection along the poles under road under drains complete all as specified.

Excavation in trenches n.exc 1.5 mtr wide and 1.5 mtr in depth in hard/dense soil for taking up/ laying of cable and getting out complete all as specified and directed.

Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing surplus soil to a distance n.exc 50 mtr and making good the disturbed surfaces complete all as specified and directed.

Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site.

Supply and laying for brick of common burnt clay, sub class 'B' old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed.

Disconnecting existing PVC water storage tanks of capacity exc 500 ltrs & n exc 1000 ltrs, setting aside (or lowering if required) for laying of APP memberane or repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

Roughning for old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust/any existing roof treatment including brushing neat cement slurry with 3.00 Kg of cement per sqm etc.

M&L for PCC 1:2:4 type B-0 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified

M&L for fixing APP based polymeric membrane minimum weighing 3.50kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced torch application complete.

M & L for applying two coat of aluminium paint over surfaces of any description including preparation of surfaces etc complete.

Supply only liquid water proofing compound .

Demolition of cement concrete(reinforced) in any description in any position not otherwise specially provided disposal off from the premises at distance of not exc . 1 Km complete all as specified and directed.

M&L for demolition of Concrete of any description incl sunken and in any position not otherwise specifically provided for

M & L for Cement concrete type B-0, 1:5:10 (using 40 mm graded aggregate),as in sunken floor treatment etc complete all specified and as directed

Supplying and laying of CPVC spout pipes 40mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Providing, cement concrete in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not providedfor in Item 04028, watertroughs and the like includingweathering, slightly roundedor chamfered angles and throating, as directed

M & L for Cement concrete type B-0, (1:2:4) (12.5 mm graded aggregate), 25 mm thick in flooring etc complete all specified and as directed

M & L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4.including roughnening surfaces of old concrete floor bypicking, sweeping clean and washing down with water to remove dust, etc.

M & L for coloured glazed ceramic tiles in vertical surface area of each tile not less than 0.06 Sqm and not exc 0.20 Sqm , 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in cement mortar 1:4 as backing for tiles incl taking down old tiles complete all as specified and as directed.

M&L for vitrified Ceramic tiles light shed 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 including roughnening surfaces of old concrete floor by picking, sweeping clean andwashing down with water to remove dust, etc.

M & L Machine cut Kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,moulding and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:6 incl dismantling of existing kota stone including cement mortar bedding (but not backing) complete all as specified and directed.

M & L Kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,moulding and polishing and incl 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing including dismantling of existing kota stone including cement mortar bedding (but not backing) complete. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring)

M & L for 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing kota stone complete.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L brickwork with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC Note:-WPC measured and paid separatly

M&L for rendering 10mm thick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed.

M & L for applying thin layer of 1.00mm thick plaster of paris water proof wall care putty on wall and ceiling surfaces including removal of existing treatment/preparation of new plastered surfaces and making the surface uniform and smooth complete all as specified and directed.

M & L for preparing new plastered wall surfaces and distempering two coats on walls with distemper oil emulsion, white or tinted over a coat of chalk whiting complete all as specified and directed.

M&L for two coats cement base paint over a coat of primer including preparation of newly plastered wall surfaces complete

M & L for preparing new plastered ceiling surfaces and distempering two coats on ceilings with distemper oil emulsion, white or tinted over a coat of chalk whiting complete all as specified and directed.

M & L for preparation of old decorated surfaces including brooming down or steel wire brushing complete of walls and applying two coat of distempering with acrylic distemper as per manufacturer instruction white or tinted complete all as specified and directed.

M&L for two coats cement base paint over a coat of primer including preparation of old decorated wall surfaces complete all as specified and directed.

M & L for preparation of old decorated surfaces including brooming down or steel wire brushing complete of ceiling and applying two coats of white wash all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exc 1.5 Sq mtr each complete all as specified and directed.

S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sqm not exc 4.00Sqm each complete all as specified and directed.

S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame complete all as specified and directed.

M&L for pressed steel door frame one or more rebate size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.

M&L for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.

M&L for 35mm thick IInd class hard wood plain framed panel shutter (two panels or more) with lock rails and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S. 1003(Part-I)2001 ,complete all as specified and directed.

M&L for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete. complete all as specified and directed.

M&L for 35 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top . complete all as specified and directed.

S&F 100mm long Stainless steel butt hinges with steel hinge pin etc.complete all as specified and directed.

S&F 75mm long Stainless steel butt hinges with steel hinge pin etc.complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 150mm long aluminium anodised handle cast type and fixed D Type complete all as specified and directed.

S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto four storey of bldgs) complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete all as specified and directed.

S&F Decorative Particle board 18/19 mm thick fixedwith nails to timber frame work incl necessery beeding/edging etc complet all as specified and directed.

M&L for second class hardwood plain, solid, straight chowkat and frame, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised width of flap (when open) in 30 mm complete all as specified

S & F white colour rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position incl dismantling of existing water tank all as specified and directed.

S & F15mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule incl nipple,connection pipe,union etc.complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm dia including cleaning for refixing or removal to store complete all as specified and directed.

S&F Galvanised steel tubes 15mm dia fixed to wall / floor surfaces incl all necessery fittings like union,connection pipe etc all as specified and directed.

Taking up or down steel tubing and connections, 20 mm dia including cleaning for refixing or removal to store complete all as specified and directed.

S&F Galvanised steel tubes 20mm dia fixed to wall / floor surfaces incl all necessery fittings like union,connection pipe etc all as specified and directed

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed

Supplying and laying of CPVC pipes 15mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed

S & F 20mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete.

S & F 15mm dia Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (FTA/ FBTA) complete.

S & F 20mm dia CPVC ball valve complete.

S & F 15mm dia CPVC ball valve complete.

S & F as in repair of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Water closet (Squatt pattern) complete including provision of lime concrete bedding complete all as specified and directed.

S & F as in repair 10 litre PVC valveless, syphonic action type, Dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. complete all as specified and directed.

S & F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe but including 32mm dia chromium plated waste fittings with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repair 600x450mm bevelled edges 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S & F in repair 600mm long brass chromium plated tubular towel rail 20mm dia, D type fixed with rawl plugs in cement mortar 1:3 with MS screws complete all as specified and directed.

S & F in repair brass chromium plated soap dish fixed to wall with CP screw complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repair 15 mm dia bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union. complete all as specified and directed.

S & F as in repair brass chromium plated shower rose 125 mm size with or without swivel joints, anysize, including fixing to steel pipe or union all as specified and directed.

S & F in repair 15mm stop valves cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed all as specified and as directed.

S&F as in repair PVC connections 15mm size with PTMT nuts of length 900 mm all as specified and as directed.

S & F in repair 100mm dia steel chromium plated gratings fixed on floor trap/Nahani trap in cement mortar 1:4 complete all as specified and directed.

Supply & fix in repair brass chromium plated fancy type Sink Mixer/single lever WHB Mixer/wall mixer (2/3 hole) with provision for connection to shower rose for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete. complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed

S&F in repair PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&Fin repair PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S & F in repair of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete.

S & F in repair of PVC (SWR) junction single, (Single T) 75 mm bore equal or unequal with acess door complete.

S & F in repair 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes all as specified and as directed.

S&F PVC in repairs waste pipe size 32/40 mm X 800 mm flexible with coupling for WHB/Urinal etc. complete all as specified and directed.

M & L for 150mm internal diameter DWC HDPE pipe class SN-8 laid in trenches and jointed as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar for 150mm internal dia of pipe complete all as specified and directed.

M & L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, cover slabs (for man-holes etc) and similar work including necessary formwork and set in cement mortar 1:6 complete all as specified and directed.

M & L for Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

M & L for Cement concrete type D-2, (1:4:8) using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed

Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100mm to 150mm dia pipe complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ 150)as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in covering crumple joint/roof covering/cladding to wall,fixed with self tapping screws as specified

Dismantling structural steel work includingdoors, gates but excluding framed truss etc.

S&F mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 with and including one shop coat of zinc chrominium primer paint complete all as specified and as directed.

MS HARI MOHAN GUPTA (BID ID -3481862)

M/S ABHAY KUMAR AND BROTHERS (BID ID -3486458)