Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.2 LAccepted-AOC NEAR RAILWAY CROSSING ADAMPUR DOABA JALANDHAR JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹41.0 L+₹82,285 (2.05%)Rejected-Finance VILL CHOMON ADAMPUR JALANDHAR PUNJAB 144103 UDYAM PB 10 0011450 | JALANDHAR | PUNJAB | 144103 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹41.1 L+₹93,220 (2.32%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹43.8 L+₹3.6 L (8.97%)Rejected-Finance 0000 UNNAMED ROAD GAJIYA KANTIT VINDHYACHAL MIRZAPUR UTTAR PRADESH 231307 | MIRZAPUR | UTTAR PRADESH | 231307 | L4 | Rejected-Finance Other than lowest | |
| 5 | Rejected-Technical VILL PO CHOMON NEAR AIR FORCE STATION ADAMPUR JALANDHAR PB | JALANDHAR | JALANDHAR | PUNJAB | - | Rejected-Technical The applicant not fulfill the pre qualification criteria. Being non category. |
| Sl No | Description | Qty | Unit | M/S GURBACHAN SINGH L1 | BHARAT ENTERPRISES L3 | M/s Sahib and Company L2 | J.K & Company L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | M&L for Rendering 5 mm thick on RCC or similar surfaces, finished even and fair on ceilings in cement mortar (1:3) including taking down cement plaster, complete all as specified. | 100 | Square Metre | 280 ₹28,000 | 250 ₹25,000 | 250 ₹25,000 | 230 ₹23,000 Lowest |
| 2.00 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) including taking down cement plaster complete all as specified. | 800 | Square Metre | 320 ₹2,56,000 Lowest | 330 ₹2,64,000 | 320 ₹2,56,000 Lowest | 320 ₹2,56,000 Lowest |
| 3.00 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, including taking down cement plaster complete all as specified. | 1,600 | Square Metre | 350 ₹5,60,000 | 330 ₹5,28,000 Lowest | 345 ₹5,52,000 | 345 ₹5,52,000 |
| 4.00 | M&L for Repairing of RCC projection chhajjas, roof, facia etc by necessary scraping cutting, chiseling derusting,preparation, and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete (1:1.5:3) using 20mm graded stone aggt and reinforcement with & including mild steel chicken mesh and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 Sq.m and thickness of RCC member n.exc 70mm incl necessary formwork complete all as specified.
NOTE FOR SER ITEM 3 & 4: Supply only WPC will be measured and paid for separately under respective item of BoQ. | 100 | Square Metre | 600 ₹60,000 | 550 ₹55,000 | 480 ₹48,000 | 455 ₹45,500 Lowest |
| 5.00 | Supply only water proofing compound, ISI marked, complete all as specified. | 475 | Kilogram | 55 ₹26,125 Lowest | 75 ₹35,625 | 75 ₹35,625 | 74 ₹35,150 |
| 6.00 | M&L for Prepration of new plasterd ceiling surfaces of any description complete all as specified and applying the following: -
(a) Applying wall care putty, in two coats with mechanical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed).
(b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified.
(c) Two coats of interior acrylic distemper white or coloured by mechnical auto roller/ spray machine with compressor on ceiling surfaces | 100 | Square Metre | 85 ₹8,500 | 75 ₹7,500 Lowest | 80 ₹8,000 | 75 ₹7,500 Lowest |
| 7.00 | M&L for Complete removal of existing treatment from plastered wall surfaces by Vaccum based Sanding Machine till the true surface of ceiling not reached, and preparation of the surfaces to the entire satisfaction of EIC , complete all specified and applying the following: -
(a) Applying wall care putty, in two coats with mechanical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed).
(b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified.
(c) Two coats of interior acrylic distemper white or coloured by mechnical auto roller/ spray machine with compressor on ceiling surfaces | 800 | Square Metre | 87 ₹69,600 | 90 ₹72,000 | 85 ₹68,000 Lowest | 85 ₹68,000 Lowest |
| 8.00 | M&L for Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: -
(a) Applying wall care putty, in two coats with mechnical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed).
(b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified.
(c) Two coats of interior acrylic distemper white or coloured by mechnical auto roller/ spray machine with compressoe on wall surfaces | 800 | Square Metre | 65 ₹52,000 Lowest | 80 ₹64,000 | 76 ₹60,800 | 75 ₹60,000 |
| 9.00 | M&L for complete removal of existing wall surfaces of any description by Vaccum based Sanding Machine till the true surface of ceiling not reached complete all as specified and applying the following: -
(a) Applying wall care putty, in two coats with mechnical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed).
(b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified.
(C) Two coats of interior acrylic distemper white or coloured by mechnical auto roller/ spray machine with compresso on wall surfaces | 5,000 | Square Metre | 68 ₹3,40,000 Lowest | 98 ₹4,90,000 | 99 ₹4,95,000 | 89 ₹4,45,000 |
| 10.00 | M&L for Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: -
(a) Applying wall care putty, in two coats with mechnical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed).
(b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified.
(c) Two coats of exterior acrylic emulsion white or coloured by mechnical auto roller/ spray machine with compressor on wall surfaces | 1,700 | Square Metre | 85 ₹1,44,500 Lowest | 98 ₹1,66,600 | 110 ₹1,87,000 | 99 ₹1,68,300 |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
4 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sachin Kumar IDSE EE GE AF Adampur
Military Engineer Services AF Stn Adampur 144103
SMART PERIODICAL SERVICES TO CERTAIN BLDGS IN DOMESTIC AREA AT AF STN ADAMPUR
2025_MES_713039_1
GE(AF)/ADM/T-39 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
Under GE AF Adampur
As per NIT Documents
8 documents required · 8 mandatory
₹500
GE AF Adampur
₹90,000
Yes
10 Sept 2025
6 Jun 2025
5 Jul 2025
6 Jun 2025
4 Jul 2025
21 Jun 2025
6 Jun 2025 - 20 Jun 2025
Amount
M&L for Rendering 5 mm thick on RCC or similar surfaces, finished even and fair on ceilings in cement mortar (1:3) including taking down cement plaster, complete all as specified.
M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) including taking down cement plaster complete all as specified.
M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, including taking down cement plaster complete all as specified.
M&L for Repairing of RCC projection chhajjas, roof, facia etc by necessary scraping cutting, chiseling derusting,preparation, and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete (1:1.5:3) using 20mm graded stone aggt and reinforcement with & including mild steel chicken mesh and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 Sq.m and thickness of RCC member n.exc 70mm incl necessary formwork complete all as specified. NOTE FOR SER ITEM 3 & 4: Supply only WPC will be measured and paid for separately under respective item of BoQ.
Supply only water proofing compound, ISI marked, complete all as specified.
M&L for Prepration of new plasterd ceiling surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats with mechanical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed). (b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified. (c) Two coats of interior acrylic distemper white or coloured by mechnical auto roller/ spray machine with compressor on ceiling surfaces
M&L for Complete removal of existing treatment from plastered wall surfaces by Vaccum based Sanding Machine till the true surface of ceiling not reached, and preparation of the surfaces to the entire satisfaction of EIC , complete all specified and applying the following: - (a) Applying wall care putty, in two coats with mechanical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed). (b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified. (c) Two coats of interior acrylic distemper white or coloured by mechnical auto roller/ spray machine with compressor on ceiling surfaces
M&L for Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats with mechnical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed). (b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified. (c) Two coats of interior acrylic distemper white or coloured by mechnical auto roller/ spray machine with compressoe on wall surfaces
M&L for complete removal of existing wall surfaces of any description by Vaccum based Sanding Machine till the true surface of ceiling not reached complete all as specified and applying the following: - (a) Applying wall care putty, in two coats with mechnical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed). (b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified. (C) Two coats of interior acrylic distemper white or coloured by mechnical auto roller/ spray machine with compresso on wall surfaces
M&L for Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats with mechnical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed). (b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified. (c) Two coats of exterior acrylic emulsion white or coloured by mechnical auto roller/ spray machine with compressor on wall surfaces
M&L for Complete removal of existing treatment from plastered wall, pillars, cornices surfces by Vaccum based Sanding Machine till the true surface of ceiling not reached and preparation of the surfaces to the entire satisfaction of EIC , complete all specified and applying the following: - (a) Applying wall care putty, in two coats with mechnical auto roller/ spray machine with compressor & smoothening the surfaces etc. (multipurpose mixer shall be used for uniform and proper mixing of putty) as specified (preparatory to paint as directed). (b) Priming plastered or unplastered surfaces of walls with alkali resistant primer by auto roller/ spray machine, complete all as specified. (c) Two coats of exterior acrylic emulsion white or coloured by mechnical auto roller/ spray machine with compressor on wall surfaces
Uprooting tree/plants upto 30 cm girth from wall or any part of building upto double storey buildings completly to the entire satisfaction of Engineer-in-Charge, making good the disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-1 using 20mm graded stone aggregate to match with existing surfaces and removal of rubbish outside MOD land complete all as specified.
Writing letters or figures by specialist / professional painter (Block, Roman, Italic or indian) with thick black synthetic enamel paint not exc. 10cm height on white base complete all as specified.
S&F, uPVC pipes 75 mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified and directed.
S&F, uPVC pipes 110 mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with or withou rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified and directed.
S&F, uPVC/PVC bend any radius, suitable for uPVC soil waste discharge pipes 75 mm external dia, IN REPAIRS, complete all as specified and directed.
S&F, uPVC/PVC bend any radius, suitable for uPVC soil waste discharge pipes 110 mm external dia, IN REPAIRS, complete all as specified and directed.
S&F, uPVC pipes 160 mm external dia, type-A, ISI marked (IS:13592) single socketed in any length with or withou rubber ring joints, fixed to walls as Rainwater pipes, IN REPAIRS, complete all as specified and directed.
S&F, uPVC/PVC bend any radius, suitable for uPVC soil waste discharge pipes 160 mm external dia, IN REPAIRS, complete all as specified and directed.
NOTE: (i) The preparation and painting work shall be executed by authorized applicator of paint manufacturer only. (ii) Contractor shall submit MOU letter from paint manufacturer within 15 days from commencement of work. (iii) Contractor shall procure the paint after approval of make from GE in three equal parts, 1st part within 15 days of commencement and rest 2 parts at equal intervals or earlier if required and to be kept in Engr in Charge Custody (iv) Work will be executed by mechanised means/ tools (Spray machine) as required. In Case where work by mechanised means/ tools is not feasible then work will be carried out through auto roller or any other mean after obtaining direction from Engineer - in- charge. (v) Periodical work shall be completed with in 7 days after handover of key of bldg, in case of delay panality @ Rs 500/- per day per bldg will be applicable. (vi) Necessary cleaning of painting/distemper marks from floor, doors, window, cleaning of furniture and window panes, pelmet box, Pelmet box/Drapery rod is deemed to be inclusive of rate quoted by the contractor. Non cleaning of floor shall be recovered @ Rs 500/- per qtr for the same. (vi)Contractor shall procure/ brought to site the sanding machine, auto roller, paint mixing machine and other specified T&P with in 15 days from the date of commencement. (vii) Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.
M/s Sahib and Company (BID ID -3339675)
BHARAT ENTERPRISES (BID ID -3339036)
J.K & Company (BID ID -3339213)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .