8688 REPAIRS PLUMBING SANITARY FITTINGS TILINGS ROOF TREATMENT WPT IN SUNKEN FLOOR AND CONNECTED MISC B R WORKS AT A AND B WING OF DAD RESIDENTIAL COMPLEX UNDER AGE BR I OF GE SOUTH PUNE

Amount

Demolition of cement concrete of any description in any position in sunken floor and roof slab padding & like etc including removal of debris & demolished materials and dumping ground will be sorted out by the contractor at his own arrangement & cost, complete all as specified and as directed.

M&L for provide PCC 1:2:4 type B-0 (Using 12.5mm size graded stone aggregate) of uniform thickness of 50mm in two layers of 25mm thick each as in PCC padding in roof, kerbs or mud stops, rounded and chamfered on edges and on chajjas laid over RCC surface shall be finished even and smooth without using extra cement but including with false groove at 300x330mm centre to centre, laid in slope and mixed with necessary water proofing chemicals complete all as specified and directed by the Engr-in-charge. Note : WPC shall be measured and paid separately.

M&L for water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below including removing of existing bituminous tarfelt including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab including removing of bitumen primer applied on slab complete all as specified and as directed by Engineer-in-Charge with and including following provisions:- (a) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of ShaliTex primer (solvent based bituminous primer) conforms to IS: 3384-1986 coat of ShaliTex primer @ 0.3 Kg/Sqm shall be applied on the prepared and cleaned roof surface and parapet. Ensure not to apply when temperature is less than 5° C or during foggy period. Primer shall be allowed to dry for overnight.

Ser. Item No. 3.00 Contd... (b) Providing and laying APP (Atactic Polypropylene polymer) 3mm thick SuperThermolay Spun bonded non woven polyester reinforced APP modified water proofing membrane, black finished reinforced with non woven polyester matt weight not less than 3.5 Kg/Sqm manufactured by STP Ltd. The laying of membrane with a 75 mm longitudinal and 100mm transverse direction overlap shall be provided and laid using LPG torch and sealing all joints etc complete. (c) Finally applying a coat of Super Silver Shield confirmed to IS: solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr-in-Charge. (Make: STP Ltd or equivalent in Supremo/ pidilite / fosroc ) Note : i) Work shall be done by STP Ltd (OEM) / fosroc /Pidilite / Suprimo (OEM) respective applicator & work should be able to furnish stagewise on site technical reports from concerned company technologist during currency of work and entire completion of work. ii) Contractor shall submitt 10 years OEM guaranttee for water proof treatment.

M&L for old size fly ash half bricks walls, straight or curved on plan n. exc. 6 m mean radius built in CM 1:4 including dismantling of old existing wall etc. complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for rendering 15mm thick cement plaster 1:4 on brick / concrete as in external wall surfaces mixed with water proofing compound as per manufacturer's instructions with sponge finish on external surfaces of walls including taking down of existing cement plaster including racking out joints, hacking for keys and scrubbing down with water, including removal of debries & dismantled materials complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately.

M&L for 10mm thick plastering in CM 1:6 on fair faces of bricks or concrete surfaces finished even and smooth including with sagol finish on internal wall surfaces including taking down of existing cement plaster including racking out joints, hacking for keys and scrubbing down with water, including removal of debries & dismantled materials complete all as specified and directed.

M&L for 5mm thick plastering in CM 1:3 on fair faces of ceilings surfaces finished even smooth including with sagol finish on ceiling surfaces including taking down of existing cement plaster and scrubbing down with water, including removal of debries & dismantled materials complete all as specified and directed.

Supply only liquid water proofing compound / chemical complete all as specified and as directed. (Make:- Pidilite CF 21 by Pidilite, Dr Fixit, ShaliPlast LW+ by STP Ltd.)

M&L for pruning of vegetation and plants growth on the external wall surfaces / roofs (dia n. exc. 3 inch) and applying Hydrochloric acid on the left over root portion and making good disturbed portion with CM 1:4 or PCC 1:2:4 grouting and finished with two coats of cement base paint to match the existing colour shade, complete all as specified and directed. Note:- The cost of necessary scaffolding up to G+3 height shall be deemed to be included in quoted rates

Dismantling wrought iron or mild steel iron of any description not otherwise provide for, complete all as specified and directed.

S & F rolled mild steel section conforming to grade E-165 (Fe-290) framed work as in door or gates of angle or other section with gusset plates rails , braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, fastening, etc complete all as specified and directed by Engr-in-Charge.

Disconnecting existing water storage tanks of any capacity not exc. 1000 ltrs and setting aside or lowered if required, and re-fixing in the same position after carryout necessary roof treatment work including necessary fittings like float valve, tank nipple and GI pipes (if any required), complete all as specified and directed. Note:- Necessary temporary arrangement for water supply during roof treatment work shall be done by the contractor at his own cost.

Supplying, fixing, jointing and testing of 15mm bore galvanised iron pipe, medium grade including with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking up or down of old unserviceable GI pipe and connections including cleaning for refixing or remove from site, complete all as specified and directed.

Supplying, fixing, jointing and testing of 20mm bore galvanised iron pipe, medium grade including with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor including taking up or down of old unserviceable GI pipe and connections including cleaning for refixing or remove from site, complete all as specified and directed.

S&F in repairs lid / cover suitable for 500/1000 litres capacity PVC water storage tanks fixed with PVC locking arrangements complete all as directed

Cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc, capacity exceeding 250 litres and not exceeding 500 litres including written of date of cleaning with white or black (As applicable) synthetic enamel paint, complete all as specified & directed.

M&L for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc, capacity exceeding 500 litres and not exceeding 1000 litres including written of date of cleaning with white or black (As applicable) synthetic enamel paint, complete all as specified & directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks including dismantling of old existing PCC block masonary built in cement mortar, complete all as specified and directed

Supply and fixing of rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position, three layered including with brass tank nipple of suitable size & dia, 20 mm ball brass valve high pressure with rod & high density plastic ball including taking down of old unserviceable tank and remove from site, complete all as specified and directed

Supply and fixing of rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position, three layered including with brass tank nipple of suitable size & dia, 20 mm ball brass valve high pressure with rod & high density plastic ball including taking down of old unserviceable tank and remove from site, complete all as specified and directed

M&L for PCC 1:2:4, type B0 laid as in base of water tank, roof slab and any other locations with water profing compound, complete all as specified & directed. Note:- WPC shall be measured & paid seperately.

Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each, complete all as specified and directed.

Taking down / cutting of steel windows shutter by means of gas cutter with out disturbing of sofit / jambs / cills etc of any description n. exc. 1.5 sqm (without taking off guard bar) complete all as specified and as directed.

S&F of three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to following catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F ventiltors / louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and by using of following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make including with rubber beading etc, complete all as directed by Engr-in-charge. (a) SP 20048 (b) Glazing clips 19352

S&F in repairs vitreous china wash down water closet pan (squatting pan) white including provision of concrete bedding, orissa pattern size 580x440mm white with integral foot rests (excluding flushing system and flush pipe), complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc with and including PVC seat cover white with flat bottom including mild steel CP or aluminium anodised hinges devices etc complete all as specified and directed.

S&F in repair vitrous china wash hand basin snow white 580x440 mm flat back with and PVC waste pipe 40mm dia medium grade, CP brass waste coupling 32mm dia with check nut washer etc, complete all as specified and directed.

S&F in repair for 10 litres capacity PVC flushing cistern low level including ball valve inlet & outlet connection 15 mm dia PVC pipe with check nuts on both ends, PVC waste pipe 32 mm upto WC connection and GI 15 mm dia medium grade overflow pipe upto floor level, complete all as specified and directed.

S&F in repairs 20mm dia ball valves brass high pressure with polythene float and fly nut complete screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm dia bib tap fancy type of cast copper alloys (Chromium plated) with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 105gm), complete all as specified and directed.

S&F in repairs 15mm dia pillars cock cast copper alloys (Chromium plated) with swan neck spout left and areator for iron pipe complete all as specified and directed.

S&F shower rose fancy type brass chromium plated 125 mm dia heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions including with taking down the old unserviceable shower roses, complete all as specified and directed.

S&F in repairs of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated hinging device, complete all as specified and directed.

S & F in repair health faucet conforming to CAT No. F8030301 or equivalent cat part as mentioned of make "CERA" or of equivalent make specified here-in-after, complete all as specified and directed.

S&F in repairs 15mm dia angle cock with wall flange of "CERA" cat no F2007201 or equivalent cat part, chromium plated and cup secrewed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repairs 15mm bore stop valve chromium plated cast copper alloy fancy type (concealed type) with long shank and cup screwed down high pressure with capstan head or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repair tubular towel rail brass chromium plated 20mm dia 600mm long fixed with brass screws, complete all as specified and directed.

S&F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms), complete all as specified and directed.

S&F in repairs PVC box type cabinet of approx size 35 x 40 x 12 cm with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed in existing opening with wooden plugged including taking down existing, complete all as specified and directed. Make :- Prayag/Nilkamal/Shakti

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors, complete all as specified and directed.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, pillar, window cill, shelf, cooking platform and like in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15mm thick screed bed in CM 1:6 including grinding polishing including dismantling of existing finishes and screed bedding layer (if any) of any description and removal of debries & dismantled materials complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, shelf cooking platform, and other similar situations, complete all as specifed and directed.

S&F in repairs of stainless steel sink without drainage board made of 1mm thick stainless steel sheet, for kitchen or laboratory, with plug, waste pipe, washers and wastes, including bedding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 550 mm X 460 mm with bowl size 410 mm X 330 mm X 160 mm complete all as specifed and directed.

S & F machine cut cuddappa stone slab one side polished, 40 to 50mm thick as in shelf, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm screed bed in cement mortar 1:4, including dismantling of existing one and screed bedding layer (if any) of any description and removal of debries & dismantled materials complete all as specified and directed.

M&L for coloured glazed ceramics tiles 450x300x7to8mm thick as on vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick rendering as in backing coat in CM 1:4 on stone / brick/ concrete masonry surfaces including triangular filleting in CM 1:4 on top edges including dismantling of old unserviceable tiles including backing coat of any description and removal of debries & dismantled materials complete all as specified and directed.

M&L for 300x300x6 to 7mm thick, non skid, ceramic, coloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete laid over and including 15mm thick screed bed in CM 1:6 complete including dismantling of old unserviceable tiles & screed bedding layer of any description including removal of debries & dismantled materials complete all as specified and directed.

M&L for vitrified ceramic tiles of 600x600x10 mm thick size, light shade colored tiles (square/ rectangular) as in floor etc., set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling of old unserviceable tiles & bedding layer of any type and removal of debries and dismantled materials, complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

S&F in repairs, stainless steel wire cloth 0.36 mm nominal dia and 1.40 mm average width aperture, fixed as in three track sliding window shutter exc. 0.50 sqm in each pane and including replacement of old unserviceable rubber beading, shutter lock, bearing etc and ensure smoothing functioning of shutters, etc. complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and directed

M&L for 30mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass (with sash bars), guage etc divided into squares with plain, chamfered or rounded, mitered and rebated sash bars any number, size of members of shutters as specifie in clause 8.24(a) of SSR Part-I 2009, complete all as specified and directed.

S&F in repairs stainless steel plate rack of size 30"X32"X8/10" made from 1 mm thick salem stainless steel sheet grade SS-304, ISI marked with shelves & hooks including necessary fixing arrangement etc. complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating 150 gms GI based corrugated steel sheet 0.50mm thick as in roof sheeting of required colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed

M&L for preparation of new plastered surfaces of wall and applying two coats of weather proof Apex Ultima paint of required shade with silicon additive over and including priming coat of exterior grade of primer on external surfaces of walls etc. complete all as specified and directed

S&F in repairs 25 mm dia stainless steel, fancy type curtain rod, medium weight, fixed in fancy type bracket, stops roller etc complete all as specified and directed

S&F stainless steel fency type caps / side bulbs etc. suitable for 25mm dia curtain rod pipe complete all as specified and directed.

M&L for preparation of new palstered surface of wall and applying two coats of oil bound distember over a coat of primer, complete all as specified and directed.

M&L for preparation of new palstered surface of ceilings and applying two coats of oil bound distember over a coat of primer, complete all as specified and directed.

M&L for complete removal of existing treatment from wall surfaces, washing, rubbing down and stopping and make surfaces even and smooth and applying two coats of Apex Ultima weather proof exterior alkali & fungal resistance, dirt resistance exterior paint over a coat of primer including preparation of surfaces etc complete all as specified and directed

S&F in repairs PVC (SWR) 110mm bore pipes, single socketed in any length incluidng with rubber ring joints & clamps etc. complete, laid in trenches or fixed to wall / ceilings including dismantling of old unserviceable pipe of any type, complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm bore pipes, single socketed in any length incluidng with rubber ring joints & clamps etc. complete, laid in trenches or fixed to wall / ceilings including dismantling of old unserviceable pipe of any type, complete all as specified and directed.

Taking down old serviceable PVC (SWR) pipe of 110mm dia and re-fixing at position after & including cleaning the same with solvent cement of any length with rubber ring joints fixed to walls or ceiling or floors, etc. complete all as directed by Engr-in-charge.

Taking down old serviceable PVC (SWR) pipe of 75mm dia and re-fixing at position after & including cleaning the same with solvent cement of any length with rubber ring joints fixed to walls or ceiling or floors, etc. complete all as directed by Engr-in-charge.

S&F PVC (SWR) bends with oval access door of 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with oval access door of 75mm bore, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access complete all as specified and directed.

S&F for 75mm dia SWR junction (single 'T') equal or unequal with door access, complete all as specified and directed.

S&F for 110mm dia SWR junction (single 'T') equal or unequal with door access, complete all as specified and directed.

S&F PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

M&L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush to removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles / cracks in floor and wall and injecting injection of CORESEAL 135A/ CORESEAL 135B all as per manufactures insrtuctions complete all as directed by Engr-in-Charge. (Make:- AQYATYTE, CREAT, SEAL, grouting compound of Ashwin Enterprises, GPSS (Ground Penetrating sealing systems) of Saga Polytech or similar brand as approved)

S&F in repairs 32 mm bore of discharge waste coupling of PTMT (Half or full threaded (Minimum weight 45 gms), suitable for kitchen sink, complete all as speciifed and directed.

S&F in repairs 32 mm bore un-plasticised PVC pipe having langth 1.0 m each fixed to outlet of WHB / kitchen sink etc, complete all as speciifed and directed.

Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame & remove from site complete all as specified and directed.

Taking down chowkhat or frames exc. 1.50 Sqm but n. exc. 4.0 sqm each with shutter without taking off shutter from the frame & remove from site complete all as specified and directed.

S & F pressed steel frames for doors 105 x 60mm size with one & more rebates with and including necessary fixing lugs, hinges, lock strike plate etc with and including MS hold fast - 04 Nos., MS cold rolled 100mm size butt hinges- 03 Nos., welding to existing MS frame, PCC 1:2:4 type B1 for embedding hold fasts and plain cement concrete 1:3:6 type C1 (Using 12.5mm graded stone aggregate) as in filling in hollow portion of MS door frame, complete all as specified & directed.

S & F pressed steel frames for doors 125 x 60mm size with one & more rebates with and including necessary fixing lugs, hinges, lock strike plate etc with and including MS hold fast - 04 Nos., MS cold rolled 100mm size butt hinges- 06 Nos., welding to existing MS frame, PCC 1:2:4 type B1 for embedding hold fasts and plain cement concrete 1:3:6 type C1 (Using 12.5mm graded stone aggregate) as in filling in hollow portion of MS door frame, complete all as specified & directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings, complete al as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles plain colour PVC sheet for top rail , lock rail & bottom rail either side & as gap isert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC beading and jointed together with solvent cement, supplying and fixing in the frame at site as per SSR Part-I specification & drawing.

M&L for complete removal existing treatment and preparation of surfaces of walls by scrapping, washing, rubbing down & stopping etc and applying two coats oil bound distemper over a coat of primer with and incluidng applying 2mm thick wall care putty and making of surfaces even and smooth prior to applying of top finishes complete all as specified and directed

S&F in repairs 4 mm thick plain or tinted glass, fixed as in three track sliding window shutter exc. 0.50 sqm in each pane and including replacement of unserviceable rubber beading, shutter lock, bearing and ensure smoothing functioning of shutters including taking down and re-fixing of shutter after rectification of defects, etc. complete all as specified and directed

S&F of 30mm thick flush shutters, solid core construction with block board core and plywood face panels, one side has to be covered with decorative veneer with and including lapping arround the shutter to match complete all as specified and directed.

S&F 250mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F of 100 mm size mild steel butt hinges medium weight, cold rolled, complete all as specified and directed.

S&F 150 mm size aluminium anodised handles, cast type, anodised, complete all as specified and directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed

M&L for preparation of old painted surfaces of wood based / wooden and applying one coat of synthetic enamel paint over 10 cm in width or girth, etc. complete all as specified and directed

M&L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Removing building materials etc to a distance exceeding 5 Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

S&F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, 15mm bore dia of pipe, complete all as specified and directed

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd (BID ID -3297344)

SARATH ENTERPRISES (BID ID -3297930)

Gauri Associates (BID ID -3303029)

K S CHADHA AND SONS (BID ID -3297979)

MONA ASSOCIATES (BID ID -3300912)

M/s Omkar Associates (BID ID -3302711)