Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹98.9 LAdmitted-Finance | ₹98.9 L | L1 | Admitted-Finance |
| 2 | L2₹2.1 Cr+₹1.1 Cr (114.0%)Admitted-Finance | ₹2.1 Cr+₹1.1 Cr (114.0%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | V. MOHAN BABU L1 | E-VERVE DESIGN L2 |
|---|---|---|---|---|---|
| 1.00 | Removing and refixing precoated galvanised puffing profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x125 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 300 | Sqm | 171 ₹51,300 Lowest | 850 ₹2,55,000 |
| 2.00Providing and fixing 50 mm thick factory-made PUF (Polyurethane Foam) insulated roofing panels with outer and inner facings of precoated galvanised iron/steel sheets of 0.50 mm (±0.05 mm) thickness each, conforming to IS: 277 with minimum 120 GSM zinc coating and 240 MPa steel grade, having 5–7 microns epoxy primer on both sides and 15–18 microns polyester top coat on exposed surface, including back coat as per manufacturer’s specification, and supplied with minimum 25 microns protective guard film to prevent damage during transportation and erection; the insulation core shall be rigid PUF of 50 mm thickness, density 40 ± 2 kg/m³ and thermal conductivity not exceeding 0.023 W/mK, factory injected to ensure proper bonding with steel facings, with panel effective cover width about 1000 mm (overall width about 1060 mm) and supplied in single lengths up to 12 m or as required; | |||||
| 2.10 | the panels shall be fixed in position over prepared supporting framework using self-drilling/self-tapping screws of size 10 mm dia × 110 mm length with EPDM washers/seals ensuring complete watertightness, including necessary side/end laps, alignment, cutting, trimming and fixing for all heights and in horizontal, vertical or curved surfaces as per directions of Engineer-in-charge, complete in all respects, excluding the cost of purlins, rafters, trusses and structural supports, but including all materials, labour, tools and tackles required .
Make: Jindal /JSW / ESSAR | 180 | Sqm | 2,250 ₹4,05,000 Lowest | 2,250 ₹4,05,000 Lowest |
| 3.00Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Make: JSW / ESSAR | |||||
| 3.10 | Ridges plain (500 - 600mm) | 112 | Mtrs | 540 ₹60,480 Lowest | 2,250 ₹2,52,000 |
| 3.20 | Flashings/ Aprons.( Upto 600 mm) | 72 | Mtrs | 450 ₹32,400 Lowest | 2,260 ₹1,62,720 |
| 3.30 | Barge board (Upto 300 mm) | 783 | Mtrs | 333 ₹2,60,739 Lowest | 780 ₹6,10,740 |
| 4.00Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. Make: JSW / ESSAR | |||||
| 4.10 | 0.80 mm thick with zinc coating not less than 275 gm/m² | 46 | Mtrs | 990 ₹45,540 | 690 ₹31,740 Lowest |
| 5.00Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : Make: : JSW / ESSAR | |||||
Tender Value
Refer Docs
EMD Value
₹4.5 L
Closing Date
11 Aug 2026, 3:00 pmClosed
The Registrar
Admin Building, IIITDM Kancheepuram
Repair works in the PEMS Academic Blocks A, B, C and D at IIITDM Kancheepuram
2026_IITDM_920026_1
IIITDMK/2026-27/ENGG/CIVIL/005
Open Tender
Civil Works
Item Rate
120 days
IIITDM Kancheepuram
As per eNIT
8 documents required · 8 mandatory
₹0
₹4.5 L
21 Aug 2026
31 Jul 2026
12 Aug 2026
31 Jul 2026
11 Aug 2026
31 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Removing and refixing precoated galvanised puffing profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x125 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | |||||
| 2Providing and fixing 50 mm thick factory-made PUF (Polyurethane Foam) insulated roofing panels with outer and inner facings of precoated galvanised iron/steel sheets of 0.50 mm (±0.05 mm) thickness each, conforming to IS: 277 with minimum 120 GSM zinc coating and 240 MPa steel grade, having 5–7 microns epoxy primer on both sides and 15–18 microns polyester top coat on exposed surface, including back coat as per manufacturer’s specification, and supplied with minimum 25 microns protective guard film to prevent damage during transportation and erection; the insulation core shall be rigid PUF of 50 mm thickness, density 40 ± 2 kg/m³ and thermal conductivity not exceeding 0.023 W/mK, factory injected to ensure proper bonding with steel facings, with panel effective cover width about 1000 mm (overall width about 1060 mm) and supplied in single lengths up to 12 m or as required; | |||||
| 2.1 | the panels shall be fixed in position over prepared supporting framework using self-drilling/self-tapping screws of size 10 mm dia × 110 mm length with EPDM washers/seals ensuring complete watertightness, including necessary side/end laps, alignment, cutting, trimming and fixing for all heights and in horizontal, vertical or curved surfaces as per directions of Engineer-in-charge, complete in all respects, excluding the cost of purlins, rafters, trusses and structural supports, but including all materials, labour, tools and tackles required .
Make: Jindal /JSW / ESSAR | - | Sqm | - | - |
| 3Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Make: JSW / ESSAR | |||||
| 3.1 | Ridges plain (500 - 600mm) | - | Mtrs | - | - |
| 3.2 | Flashings/ Aprons.( Upto 600 mm) | - | Mtrs | - | - |
| 3.3 | Barge board (Upto 300 mm) | - | Mtrs | - | - |
| 4Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. Make: JSW / ESSAR | |||||
| 4.1 | 0.80 mm thick with zinc coating not less than 275 gm/m² | - | Mtrs | - | - |
| 5Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : Make: : JSW / ESSAR | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.12 MB
BOQ_966848.xls
BOQ • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .