Construction of Customs office building in SEZ at SIPCOT Industrial Park, Gangaikondan

Amount

CONSTRUCTION OF CUSTOMS OFFICE MAIN BUILDING

Clearing jlight jungle from the site after drying of jungles and destroyed including levelling the site by using machineries neatly and all other labour charges etc complete complying with standard specification and as directed by SIPCOT officer.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers.

Refilling with excavated earth other than sand with an initial lead of 100 mts. and depositing the earth as shown by the SIPCOT officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification and as directed by SIPCOT officers.

Supplying and filling in foundation and basement with sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT Officers.

Providing and laying Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken granite stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated, curing and cost and conveyance of all materials to site etc. complete complying with standard specification and as directed by SIPCOT Officers.

Brick work in Cement Mortar 1:5 using best quality of IIIrd classcountry bricks of size 83/4" x 41/4" x 23/4" for foundation and basement including curing, etc., complete complying with standard specifiction and as directed by SIPCOT Officers.

Upto Basement level

In Ground floor Super structure

Damp proof course with Cement Mortar 1:3 (One Cement and Three sand) 25mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification and as directed by SIPCOT Officers.

Construction of brick partitions walls 115mm thick (half brick work) in cm 1:3 using IIIrd class country bricks of size 83/4" x 41/4" x 23/4" including scaffolding raking out joints curing etc. complete at every 900mm centres with M.S. reinforcement consisting of 2 Nos. of 8mm dia MS bars for main reinforcement with 6mm dia MS links at 230mm centre to centre etc. complete complying with standard specification and as directed by SIPCOT Officers. Super structure in Ground Floor

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting steel centering for sides and soffits including supports and strutting upto a height of 3.29metres for plane surfaces such as RCC slabs, beams TEE or EL beams, lintels, stair case beams etc., in all floors with all cross bracings using mild steel BG 10 sheets of size 90 cm x 60 cm stiffered with welded milk steel angles of size 25mm x 25mm x 3mm laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10 cm to 13cm dia spaced at 75cm centre to centre etc. complete complying with standard specification and as directed by SIPCOT Officers.

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams etc.,

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing etc.,

Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half M-sand and Three hard broken granite stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, complete complying with standard specification and as directed by SIPCOT Officers.

Up to Basement level

In Ground floor super structure

Reinforced Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, complete complying with standard specification and as directed by SIPCOT Officers.

Supply, fabrication and placing in position mild steel or ribbed tor steel bars high strength deformed bars like RTS bars etc., conforming to Fe415 Grade for all RCC works including cost and conveyance of steel, binding wire to work site cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills, hoisting and placing the reinforcement in position before concreting, cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc. complete complying with standard specification and as directed by the SIPCOT Officers

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc complete complying with standard specification and as directed by the SIPCOT Officers

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the SIPCOT Officers

Supplying and fixing solid teak wood flush doors of 35mm thick with frames of size as specified by SIPCOT Officer etc., complete complying with standard specification and as directed by the SIPCOT Officers

Supplying and fixing aluminium sliding glazed windows and ventilators with frames and glass of size as specified by SIPCOT Officer etc., The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames etc., complete complying with standard specification and as directed by SIPCOT officers.

Supply and fixing M.S. Grills of pattern / design using M.S Angles/ square rods/ tubes etc., approved by SIPCOT officials for windows, gates, including cost and conveyance of all required materials with one coat of primer and all labour charges for fabrication, fixing in position in Concrete/ Masonry/ Wooden frames etc., complete and as directed by SIPCOT Officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by SIPCOT Officers

Plastering in cement mortar 1:5 12mm thick for all floors including finishing curing etc., complete complying standard specification and as directed by SIPCOT Officers.

Painting the wall two coats with approved weather proof exterior Emulsion Paint over one primer coat of over cement plastered wall surface etc., complete complying with standard specification and as directed by SIPCOT Officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT Officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by SIPCOT Officers.

Paving the floor with best quality double charged Vitrified Tiles of size 600 x 600 x 8 mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification and as directed by SIPCOT Officers. (The make and brand of the tiles should be got approved by SIPCOT Officers before use on works)

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by SIPCOT Officers.(The make and brand of the tiles should be got approved by SIPCOT Officers before use on works)

Flooring with ceramic tiles of 305 x 305 x 6 mm size laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification and as directed by SIPCOT officers.

providing water supply arrangements

Supplying, laying and jointing best quality ‘B’ class GI pipes of approved quality of the following size above ground level up to 4 metre height including fixing GI specials, cutting, threading, fixing to wall with necessary teak wood plugs, clamps and screws, making holes on the wall or drilling holes in roof and making good to the dismantled portions to original condition with necessary brick work, necessary scaffolding charges etc., but excluding cost of such specials. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel pain over a priming coat of red oxide etc., complete complying with standard specification and as directed by SIPCOT Officers.

GI Pipe 32mm dia ‘B’ class

GI pipe 25mm dia ‘B’ class pipe

Supplying and fixing in position first quality and approved variety of gun metal gate valve/wheel valve/check valve/push cock (Heavy duty) and GI Tee with ISI mark of the following sizes including cost of shellac, thread, labour charges for cutting threading of GI pipes etc. complete complying with standard specification for both internal and external water supply arrangements etc.,complete complying with standard specification and as directed by SIPCOT Officers.

GI GM Gate valve 25mm

Wheel valve ½ “

GI Tee 32mm x 32m x 32mm

GI Tee 25m x 25mm x 25mm

GI Tee 32m x 25mm x 25mm

Supplying and fixing in position GI union (heavy type) of approved quality and variety of various sizes, including necessary cutting and threading of GI pipes for jointing the union and providing two coats of painting with good variety and approved quality synthetic Enamel paint over a coat of priming coat in case of pipe line above ground level and one coat of Tar in case of pipeline below ground level for both internal and external etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and fixing in position 15mm diameter brass/CP screw down tap/pillar tap/swan neck tap (Heavy duty) of approved make confirming to IS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary the quality of tap should be got approved by the SIPCOT Engineer before use on work etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and fixing in position white European water closet with low level flushing tank of best quality and approved make with 100mm ‘P’ or ‘S’ trap with double flapped rigid PVC seat cover with CP brass hinges etc., complete complying with standard specification and as directed by SIPCOT Officers. (The make and brand of the European water closet should be got approved by SIPCOT Officers before use on works)

Supplying and fixing in position Indian water closet of size 580x 440mm, white glazed earthenware of approved quality with ‘P’ or ‘S’ trap confirming to IS:2556 part XII with sand cession and forming flooring all around the closet using 40mm broken bricks jelly in lime concrete 1:2:5 (one lime, two sand and five brick jelly) 100mm thick and finishing the top to required slop and including necessary connection to cast iron soil pipe by dismantling brick masonry, RCC roof floor slab and making the disturbed portion to original condition without leakage etc. complete complying with standard specification and as directed by the departmental Officers. (The make and brand of the Indian water closet should be got approved by SIPCOT Officers before use on works)

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550x400mm with a pair of cast iron brackets including cost of 15mm dia brass nipple, 15mm dia Nylon connection etc., including fixing the was hand basin in the wall in position with a pair of CI brackets with TW plug and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage’s etc., complete complying with standard specification and as directed by SIPCOT Officers. (The make and brand of the wash hand basin should be got approved by SIPCOT Officers before use on works)

Supplying and fixing in position Indian make bewailed edge PVC/Fibre Glass framed 5.5mm thick mirror of approved quality and brand of size 600x450mm with necessary self type with hard board backing, PVC frame with bottom stand of approved colour with brass screws, rowel plugs etc., complete complying with standard specification and as directed by SIPCOT Officers. (The make and brand of the mirror should be got approved by SIPCOT Officers before use on works)

Supplying and fixing best approved quality CP/Aluminum anodized Towel rail 600mm long and 20mm diameter with brackets of same materials including cost teakwood plug and CP screws etc., complete complying with standard specification and as directed by SIPCOT Officers.(The make and brand of the towel rail should be got approved by SIPCOT Officers before use on works)

Supplying and fixing in position CI Nahani trap of various sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (one of lime, two of sand, 5 of 40mm size brick jelly) and finished with cement mortar 1:3 (one cement and three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the cast iron pipe as directed etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and fixing in position CP shower rose with stop cock arrangement to size 15mm dia inlet and 100mm dia outlet to the pipe line with necessary cutting threading and jointing using shellac etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and fixing best approved quality porcelain soap tray of size 150mmx100mm porcelain soap dish of size 150 x150 x50mm including cost of teak wood plugs, brass screws etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and fixing in position best quality PVC pipes of various sizes having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps etc., and making connection to all sanitary fittings, dismantling masonry RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete complying with standard specification and as directed by SIPCOT Officers. (The make and brand of the PVC pipe should be got approved by SIPCOT Officers before use on works)

PVC pipe line 110mm dia

PVC pipe line 90mm dia

Supplying and fixing in position PVC specials such as plain bend, plain tee, offsets, Y-junction plea or with door of various sizes of best approved quality confirming to ISS and providing leak proof joints including fixing to walls and giving connection to the PVC soil stacks, dismantling the brick masonry/RCC floor or roof slab and redoing the disturbed portion to original condition etc., complete complying with standard specification and as directed by SIPCOT Officers.

PVC Tee 110mm x 110mm x 90mm

PVC Tee 110mm x 110mm x 110mm

PVC 110mm dia bend

PVC 90mm dia bend

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and filling in basement with sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT Officers.

Providing and laying Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken granite stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated, curing and cost and conveyance of all materials to site etc. complete complying with standard specification and as directed by SIPCOT Officers.

Reinforced Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, complete complying with standard specification and as directed by SIPCOT Officers.

Brick work in Cement Mortar 1:5 using best quality of IIIrd classcountry bricks of size 83/4" x 41/4" x 23/4" for foundation and basement including curing, etc., complete complying with standard specifiction and as directed by SIPCOT Officers.

Plastering in cement mortar 1:3 20mm thick for all floors including finishing curing etc., complete complying standard specification and as directed by SIPCOT Officers.

Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half M-sand and Three hard broken granite stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and erecting steel centering for sides and soffits including supports and strutting upto a height of 3.29metres for plane surfaces such as RCC slabs, beams TEE or EL beams, lintels, stair case beams etc., in all floors with all cross bracings using mild steel BG 10 sheets of size 90 cm x 60 cm stiffered with welded milk steel angles of size 25mm x 25mm x 3mm laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10 cm to 13cm dia spaced at 75cm centre to centre etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supply, fabrication and placing in position mild steel or ribbed tor steel bars high strength deformed bars like RTS bars etc., conforming to Fe415 Grade for all RCC works including cost and conveyance of steel, binding wire to work site cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills, hoisting and placing the reinforcement in position before concreting, cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc. complete complying with standard specification and as directed by the SIPCOT Officers

Supplying and fixing in position of PVC ventilating pipe 100mm including PVC cowls of best approved quality etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing CI manhole cover and frame of size 60cm x 60cm for inspection chamber etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying, laying and jointing best quality ‘B’ class GI pipes of approved quality of the following size below ground level including fixing GI specials, cutting, threading but excluding cost of such specials. The pipes are to be painted with one coat of Tar over gunny tape wound over the pipe etc., complete complying with standard specification and as directed by SIPCOT Officers.

25mm dia

Supplying laying and jointing the glazed stone ware pipes of various sizes of approved quality with spigot and socked ends in dry condition and laid in loose joints with necessary earthwork excavation to the required depth for trenches including shoring and strutting wherever found necessary and refilling the same and leveling the ground, laying the pipe in true alignment and gradient and conducting required water test with necessary tools and plants etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and fixing in position best quality PVC pipes of 110 MM dia having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps etc., and making connection to all sanitary fittings, dismantling masonry RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete complying with standard specification and as directed by SIPCOT Officers. (The make and brand of the PVC pipe should be got approved by SIPCOT Officers before use on works)

Supplying, delivery and fixing Syntex Tank of 3000 Litres capacity including loading, unloading, transportation and labour charges for fixing the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and filling the 40mm ISS metal in layers for the dispersion trench including all other labour charges etc., complete complying with standard specification and as directed by SIPCOT officers.

Supply, delivery and erection of open well submersible pumpsets with a duty of 50LPM x 25mm head conforming to ISI mark IS 14220 without panel board as amended thereafter and BEE 3 star rated capable of discharging the following duties due to all cuses the pump shall be with stainless steel shaft and dtnamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screw and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1 KV grade 3 core suitble falt submergable cable to a length of 15m with necessary cable joints. The non - return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50Hz (+/-5), 415+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5HP, fully automatic air break star delta upto 20HP and auto transformer starter for above 20 HP starting and for continous operation etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and fixing single phase panel board with two level guard and auto start suitable for 1 HP etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing PVC insulated and sheathed 3 core flat type copper cable conforming to IS 694/1990 etc., complete complying with standard specification and as directed by SIPCOT Officers.

Electrical arrangements

Supply and Wiring with 2x1.5 Sqm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator) and making good of the concealed portion with suitable colour for PVC concealed light point fan point for Electricial Regulator etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and Wiring with 2x1.5Sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x100mm x113mm TW switch box with 3mm thick Hylem sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of single box type 4’40 W flu fitting complete with copper choke and condensor, with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube. etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 4’40 W twin box type flu. fitting complete with copper choke and condensor, with conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminal to the fitting with flu.tubes(etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 1200 mm (48”) AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod with fan clamp with side platres and croaa arm of Size 450mm (18"). etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 300mm (12”) sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 63 Amps TPNMC switch on suitable angle iron frame work with M.S cable entry boxes with PWD earthing. etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB’s should be with the ISI mark (like standard make)etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1 No. 32 Amps DB MCB as incoming and 6 Nos. 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB’s should be with ISI mark (Like standard make)etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and laying of 2x 6 sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15 mt.Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of brass cable gland for 2 x 6 Sq.mm PVC LTUG armoured cable with earth connection etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 65mm(21/2") GI pipe (class B) of 6 mt length with 300 x 300 x 6mm MS base plate , duly welded at the bottom with concreting with construction of masonary pedstal with sutable MS box to house 5 A control switch 16 A fuse unit (500 V0 etc.with sutable angle iron frame work, with door with lock and key arrangemenrts and supply and fixing of 150 W sodium vapour lamp fitting with bulb with 1 meter of 32 mm GI pipe Class B complete, with necessary clamps ,on the above post with PVC unsheathesd leads with painting of sutable colour.etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 5A/15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick Hylem sheet.etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of 3 Nos. 5 Amps (3 pin and 2 pin) combined flush type wall socket with control switches concealed ins suitable TW box covered with Hylem sheet in flush with wall with earth connection (For computer Plug socket)etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply, erection and testing of 1.5 ton capacity split type VOLTAS A.C. with 4 KVA stabliser, Extension Copper pipe line etc.,etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing 20Amps DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC plug)etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing 300mm SL bracket with fancy shade and 40W Bulb as directed by SIPCOT Engineers etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and laying of 3 ½ x 25 Sqm PVC Armored LTUG cable in a trench to be excavated at a depth of 0.75 meter putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. etc., complete complying with standard specification and as directed by SIPCOT Officers.

Supply and fixing of TNEB Meter Board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1½ feet using angle iron of size 1 ½ “x1 ½ “x ¼ “ rigidly fixed on wall covered with hylem sheet of size 2 feet x ½ feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V) 1 No. neutral link, copper earth flat of size 1”x ¼ “ with inter connection of EB meter to fuse units by 7/16 PVC. Insulated copper wire with earth connection complete.etc., complete complying with standard specification and as directed by SIPCOT Officers.

Earthing as per the ISI specification with an earth electrode of 2.1 Mt. Class B GI Pipe of dia not less than 40mm, with copper earth plate of size 125mm x50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. etc., complete complying with standard specification and as directed by SIPCOT Officers.

Providing compound wall around custom office building

Clearing jlight jungle from the site after drying of jungles and destroyed including levelling the site by using machineries neatly and all other labour charges etc complete complying with standard specification and as directed by SIPCOT officer.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers.

Providing and laying Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken granite stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated, curing and cost and conveyance of all materials to site etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and erecting steel centering for sides and soffits including supports and strutting upto a height of 3.29metres for plane surfaces such as RCC slabs, beams TEE or EL beams, lintels, stair case beams etc., in all floors with all cross bracings using mild steel BG 10 sheets of size 90 cm x 60 cm stiffered with welded milk steel angles of size 25mm x 25mm x 3mm laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10 cm to 13cm dia spaced at 75cm centre to centre etc. complete complying with standard specification and as directed by SIPCOT Officers.

Reinforced Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, complete complying with standard specification and as directed by SIPCOT Officers.

For footing below GL upto 1.50m

Upto 4.50m from Plinth level above GL

Supply, fabrication and placing in position mild steel or ribbed tor steel bars high strength deformed bars like RTS bars etc., conforming to Fe415 Grade for all RCC works including cost and conveyance of steel, binding wire to work site cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills, hoisting and placing the reinforcement in position before concreting, cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc. complete complying with standard specification and as directed by the SIPCOT Officers

Brick work in Cement Mortar 1:5 using best quality of IIIrd class country brickskill burnt of size 83/4" x 41/4" x 2" for foundation and basement including curing, etc., complete complying with standard specifiction and as directed by SIPCOT Officers.

Upto 1.50m from GL and 1.00m above GL

Construction of brick partitions walls 115mm thick (half brick work) in cm 1:3 using IIIrd class kill burnt country bricks of size 83/4" x 41/4" x 2" including scaffolding raking out joints curing etc. complete at every 900mm centres with M.S. reinforcement consisting of 2 Nos. of 8mm dia MS bars for main reinforcement with 6mm dia MS links at 230mm centre to centre etc. complete complying with standard specification and as directed by SIPCOT Officers. Super structure in Ground Floor

Plastering in cement mortar 1:5 12mm thick for all floors including finishing curing etc., complete complying standard specification and as directed by SIPCOT Officers.

Supply and fixing M.S. Grills of pattern / design using M.S Angles/ square rods/ tubes etc., approved by SIPCOT officials for windows, gates, including cost and conveyance of all required materials with one coat of primer and all labour charges for fabrication, fixing in position in Concrete/ Masonry/ Wooden frames etc., complete and as directed by SIPCOT Officers.

Supplying and fixing of Galvanized 2 ply barbed wire fencing including cost of fencing wire and all labour charges for tying etc., , complete complying standard specification and as directed by SIPCOT Officers.

Painting the wall two coats with approved cement paint over one primer coat of over cement plastered wall surface etc., complete complying with standard specification and as directed by SIPCOT Officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by SIPCOT Officers.

Providing approach cement concrete road

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and filling in foundation and basement with M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT Officers.

Providing and laying Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken granite stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated, curing and cost and conveyance of all materials to site etc. complete complying with standard specification and as directed by SIPCOT Officers.

Providing and laying Cement Concrete 1:2:4 (One Cement, two sand and four hard broken granite stone jelly) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated, curing and cost and conveyance of all materials to site etc. complete complying with standard specification and as directed by SIPCOT Officers.

Supplying and erecting steel centering for sides and soffits including supports and strutting upto a height of 3.29metres for plane surfaces such as RCC slabs, beams TEE or EL beams, lintels, stair case beams etc., in all floors with all cross bracings using mild steel BG 10 sheets of size 90 cm x 60 cm stiffered with welded milk steel angles of size 25mm x 25mm x 3mm laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10 cm to 13cm dia spaced at 75cm centre to centre etc. complete complying with standard specification and as directed by SIPCOT Officers.

Reinforced Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, complete complying with standard specification and as directed by SIPCOT Officers.

Supply, fabrication and placing in position mild steel or ribbed tor steel bars high strength deformed bars like RTS bars etc., conforming to Fe415 Grade for all RCC works including cost and conveyance of steel, binding wire to work site cost of fabrication, labour charges for cleaning the rods, straightening, cutting, bending, tying grills, hoisting and placing the reinforcement in position before concreting, cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc. complete complying with standard specification and as directed by the SIPCOT Officers

Plastering in cement mortar 1:4 20mm thick for all floors including finishing curing etc., complete complying standard specification and as directed by SIPCOT Officers.

Painting the wall two coats with approved cement paint over cement plastered wall surface etc., complete complying with standard specification and as directed by SIPCOT Officers.

P Paramasivam

HariRam Constructions