Renovation of Building campus of National Council for Hotel Management Catering Technology NCHMCT A34, Sector 62, Noida,U.P

S.NO. DESCRIPTION AMOUNT

1 RENOVATION OF CEO ROOM 8,89,134

2 CONTROL ROOM 57,17,139

3 RECEPTION 18,88,335

4 RENOVATION OF Diretor study ROOM 7,92,258

5 RENOVATION OF Director ROOM 6,49,633

6 Deputy Director 3,57,939

7 Auditorium Room with AV facility 2,05,84,310

Miscellaneous work such as brick work,

8 dismentaling,change of AC, Synthetic track in 69,35,294

playground for students.

LGSF classroom- Expansion of one floor above the

9 academic block, to create first year, classroom 1,57,06,127

infrastructure with social distancing.

10 GENERAL TOILET 30,10,209

12 GENSET 8,01,012

13 EXAMINER ROOM 4,32,772

CHANDRE Digitally signed by

CHANDRESH KUMAR

SH KUMAR Date: 2022.06.02

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

RENOVATION OF CEO ROOM

Description of Item Rate

Sl. No. Quantity Unit Amount (In Rs)

Item DSR NDSR

Dismantling wooden boardings in lining of walls and partitions, including stacking

within 50 metres lead (thickness above 25 mm upto 40 mm)

2 1.2.14 Extra for Carriage of materials upto 0.5 Km 3.11 Cum 434.3 1349.80

Dismantling stone slab flooring laid in cement mortar including

stacking of serviceable material and disposal of unserviceable materialwithin 50

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper shape, raking out joints and preparing

and plastering the surface of the walls complete, including disposal of rubbish to the

dumping ground, all complete as per direction of Engineer-in-Charge.

14.1.1 With Cement Mortar (1 Cement : 4 Fine Sand) 61.68 Sqm 462.3 28514.66

Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling cement asbestos or other hard board ceiling or partition walls including

stacking of serviceable materials and disposal of unserviceable materials within 50

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by the

manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of

approved brand & manufacturer, in allcolours and shade, in skirting, riser of steps,

laid with cement basedhigh polymer modified quick set tile adhesive (water based)

conformingto IS: 15477, in average 6 mm thickness, including grouting of

7 11.47 joints(Payment for grouting of joints to be made separately).

Size of Tile 1000x1000 mm

Grouting the joints of flooring tiles having joints of 3 mm width, usingepoxy grout mix

of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of

resin per kg), including filling /grouting and finishing complete as per direction of

Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with

extruded built up standard tubular sections/appropriate Z sections and other sections

of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners

ofrequired dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket

9 21.1 etc. Aluminium sections shall be smooth, rust free,

For fixed portion

Powder coated aluminium (minimum

21.1.1.2 thickness of powder coating 50 micron) 68 Kg 466.3 31708.40

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost

10 21.1.2 of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

Powder coated aluminium (minimum

21.1.2.2 thickness of powder coating 50 micron) 24.18 kg 564.8 13656.86

Providing and fixing glazing in aluminium door, window, ventilatorshutters and

partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the

architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium

11 21.3 snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight noless than 12.50 kg/sqm)

Providing and fixing stainless steel (SS 304 grade) adjustable frictionwindows stays

of approved quality with necessary stainless steelscrews etc. to the side hung

windows as per direction of Engineerin-charge complete.

21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick &

2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium

21.12.2 tubular handle bar 6 each 563.5 3381.00

Providing and fixing false ceiling at all height including providing andfixing of frame

work made of special sections, power pressed fromM.S. sheets and galvanized with

zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of

angle cleats of size25 mm wide x 1.6 mm thick with flanges of27 mm and 37mm,

14 12.45 at1200 mm centre to centre, one flange fixed to the ceiling

12.5 mm thick tapered edge gypsum plain board

conforming to IS: 2095- (Part I) :2011 (Board with BIS

12.45.1 certification marks) 10.4 Sqm 1145.95 11917.88

Providing and fixing tiled false ceiling of specified materials of size

595x595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of main "T" runner

15 12.52 with suitably spaced joints to get required length and of size 24x38

mm made from 0.30 mm thick (minimum) sheet, spaced at

12.5 mm thick square edge PVC Laminated Gypsum

Tile of size 595x595 mm, made of Gypsum plasterboard,

manufactured from natural gypsum as per IS 2095 part I

and laminated with white 0.16mm thick fire retardant

12.52.3 PVC film on the face side and 12micron metalized 57.91 SQM 1948.95 112863.69

polyester on the back side with all edges sealed with

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :

13.60.1 Two or more coats on new work 54.6 SQM 137.85 0 7526.61

Providing and applying plaster of paris putty of 2 mm thickness over

plastered surface to prepare the surface even and smooth complete

Providing and fixing cupboard shutter with 19mm thick one side

decorative and other side balancing lamination factory pressed BWP

grade marine ply as per IS 710 of approved brand including 2mm thick

PVC edge banding tape with hot glue by edge bending machine etc.

18 9.168 with auto closing spring loaded hinges (hydraulic type) etc. complete 9.45 Sqm 2563.75 24227.44

as per direction of Engineer-in-charge.(Payment of providing and fixing

auto closing hinges shall be paid separately)

Providing and fixing 18mm thick both sides Pre-laminated cement bonded

wood particle board as per IS : 15786:2008 of approved brand and shade

with suitable full threaded steel screws etc. in partitions, boxes, shelves,

racks and cupboard, kitchen cabinet under kitchen counter etc. all

19 9.166 complete as per direction of Engineer-in-charge (Note: Fittings to be

paid separately).

Providing and fixing special quality bright finished brass cupboard or

ward robe locks with four levers of approved quality including necessary

screws etc. complete.

Providing and fixing magnetic catcher of approved quality in cupboard /

21 9.114 ward robe shutters, including fixing with necessary screws etc. complete.

9.114.1 Triple strip vertical type 6 Each 44.85 269.1

Providing and fixing bright finished brass handles with screws etc.

22 9.81 complete

Providing and fixing IS : 12817 marked stainless steel butt hinges with

23 9.70 stainless steel screws etc. complete :

POLISHING WORKS ON EXISTING DOORS AS PER APPROVED DESIGN AND

Supply and fixing of Vox KERRADECODECORATIVE WALLS manufactured

ineurope, of panel sizes of 295 X 2700 and 295X 1350 , durable and resistant to

moisture,impact resistant, Scratch resistance,Soundinsulation Comparabletodry

wall,Incombustibility,Water resistance. Can alsobe used in he showerHeat

conduction,Thermal insulation comparable toa 5.6 mm foam board, Lead and tin

free,Does not emit harmful substances, Recycledproduct100% recyclable,

Resistance to UV rays water and borer-fungus-termite attack.Panels to be installed

with adhesive, it mayvary according to site conditions (Installation using the GI

channels is necessary whenthe walls are uneven). Panels must bemaintainance free

, rust proof and are 100% Water proof . 10 years warranty for colour &finish of the

panels and the profiles fromVOX.COLOR FINISH : Kerradeco Art (295 X 2700

HEIGHT = 8 NOS) Supply and fixing of Vox KERRA DECODECORATIVE WALLS

manufactured in europe, of panel sizes of 295 X 2700 and 295X 1350durable and

25 NDSR resistant to moisture,impact resistant, Scratch 41.58 Sqm 6371 264910.34

resistance,SoundinsulationComparabletdrywall,Incombustibility,Water resistance.

Can alsobe used in the showerHeat conduction,Thermal insulation comparable to

a 5.6 mm foam board, Lead and tin free,Does not emit harmful substances,

Recycledproduct100% recyclable, Resistance to UV rayswater and borer-fungus-

termite attack.Panels to be installed with adhesive, it mayvary according to site

conditions (Installationusing the GI channels is necessary when

the walls are uneven). Panels must bemaintainance free , rust proof and are

100%Water proof . 10 years warranty for colour & finish of the panels and the profiles

fromVOX. Kerradecoconcrete (295 X 2700HEIGHT = 4 NOS.

Providing & fixing of Roller Blinds as per the approved sample with fabric made up of

28% Polyesterand 68% PVC 4% alumlnlum layer on the back, l2Stex Tilter Basket

weave of thickness O.S3mm tS% (ISO 2286-2) and wleghing 407gsmt5% with

openess factor of 5% .The tear resistance (Warp 172Nt10% & ,Weft 153NH0%) As

26 NDSR per ISO 544674, and pass NFPA 701 Fire Resistnncc test 12.6 Sqm 2108 26558.28

P&F LAQUERED GLASS ON WALL BEHIND CEO DESK COMPLETE WITH INLAY

27 NDSR WORKS AND SIGNAGE IN ALL RESPECT. 2.25 Sqm 4515 10159.67

LIGHTINING, AIR CONDITIONING SYSTEM 0

Supply ,Installation ,Testing and Commissioning of 1.5 Ton 3Star Split AC including

3 meter refrigenct pipe as per approved makes

Supply and fixing Refrigerant pipe for 1.5 Tr ( after 3 meter)

Supply ,Installation ,Testing and Commissioning of Voltage stablizer for AC (4 KVA)

Supply ,Installation ,Testing and Commissioning of SPOT LIGHT, sample as per

31 NDSR approved by Engineer-In-charge. 10 Each 2047 20466.00

Supply ,Installation ,Testing and Commissioning of Track Light sample as per

32 NDSR approved by Engineer-In-charge. 2 Each 3497 6994.80

Supply ,Installation ,Testing and Commissioning of STRIP LIGHT sample as per

33 NDSR approved by Engineer-In-charge. 26 METRE 648 16848.00

Supply ,Installation ,Testing and Commissioning of SURFACE LIGHTS sample as

34 NDSR per approved by Engineer-In-charge. 10 EACH 906 9063.00

GRANT TOTAL 889133.69

RENOVATION OF CONTROL ROOM

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

RENOVATION OF CONTROL ROOM

Description of Items Quantity Unit Rate Amount

SUB Head ( A ) CCTV System

Supply, Installation, Testing & Commissioning of 4MP resolution, Vandal dome

camera, 2.8 ~ 12mm (4.3x) motorized varifocal lens, Max. 20fps@4M

resolutions, Max. 30fps@2M resolutions, H.265, H.264, MJPEG codec

supported, Multiple streaming, Day & Night (ICR), WDR (120dB), Motion

detection, Tampering, Defocus detection, micro SD (128GB) memory slot, PoE /

1 12V DC, IR viewable length 30m, IP66, IK10, Hallway view support, LDC support 12 Nos 19530 234360.00

(Lens Distortion Correction), 128 GB SD Card Support, one way audio, UL

certified camera Camera shall be supplied along with Suitable adaptor with 3

meter cable. The camera shall be capable of operating on both POE and an UPS

Supply, Installation, Testing & Commissioning of 4MP resolution, Bulletcamera,

2.8 ~ 12mm (4.3x) motorized varifocal lens, Max. 20fps@4M resolutions, Max.

30fps@2M resolutions, H.265, H.264, MJPEG codec supported, Multiple

streaming, Day & Night (ICR), WDR (120dB), Motion detection, Tampering,

Defocus detection, micro SD (128GB) memory slot, PoE / 12V DC, IR viewable

2 length 30m, IP66, IK10, Hallway view support, LDC support (Lens Distortion 4 Nos 21060 84240.00

Correction), 128 GB SD Card Support, one way audio, UL certified camera

Camera shall be supplied along with Suitable adaptor with 3 meter cable. The

camera shall be capable of operating on both POE and an UPS power source .

Supply, installation, testing and Commissioning of NETWORK VIDEO

RECORDER 32CH, Max.12megapixel resolution, 256Mbps network camera

recording, Support 4K video out on HDMI monitor, Support dual monitor video

3 out, H.265, H.264, MJPEG compression, WiseStream support, Max. 8 internal 1 Nos 122040 122040.00

HDDs (48TB), ARB&Failover(N+1) support, UL Certified

Supply, installation, testing and commissioning of Surveillance hard disk 6TB

RENOVATION OF CONTROL ROOM

Supply, installation, testing, and commissioning of 43" Full HD display resolution

full HD (1920 x 1080p), 24x7 Refresh rate 50 hertz , display IPS display, wide

viewing angle blur free clarity, smart TV features, webOS , expandable memory

5 single click access 2 HDMI ports & 1 USB port to connect hard drives and other 1 Nos 55170 55170.00

6 Supply and Fixing of HDMI Cable (15 Mtr) in all respect 1 Nos 3348 3348.00

SUB Head ( B) Data and IP PBX Systme

Supply, Installation, testing and commissioning of UTP 4 pair 23 AWG CAT 6

LAN Cable surface/ recessed steel/ PVC conduit as required. 4 Pair CAT6

Unshielded, Twisted Pair (U/UTP) Cable 305 mtr per Box.

Blue/Orange/White/Green in colour conforming to the following standards like

1 ANSI EIA/TIA 568 C.2, EN50173, IEC 11801 3rd ED, frequency tested upto 13000 Mtr 25.2 327600.00

700Mhz with Third Party Certificate etc. Cable Dia 6.1 ± 0.3, Cross-member (+)

fluted Spine/isolator for uniform separation for all pairs.

RENOVATION OF CONTROL ROOM

Supply, Installation, testing and commissioning of Cat6 Tool less Information

outlet for Data & Voice. Cat6 U/UTP RJ45 socket with built in crimping

mechanism with capability of retermination without refreshing the wires. Toolless

RJ45 Information outlet with insertion cycle (in & out) should be 2500 times (I/O)

2 along with front side Label holder and transparent shutter. The Information Outlet 154 Nos. 279 42966.00

connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors

shall be compatible as per IEEE 802.3bt standard for POE++ application

CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator , Manufactured from

stranded wires for longer flex-life , Minimum length of 1m, and maximum length

of 5m Conforming to the following standards like EN 50173, ISO/IEC 60603-7 &

3 11801/IEC 60332-1, UL VW-1 with tensile strength >50N, number of insertion is 154 Nos. 162 24948.00

CAT6 UTP 24 AWG Patch Cord - 2 mtr with cross separator , Manufactured from

stranded wires for longer flex-life , Minimum length of 1m, and maximum length

of 5m Conforming to the following standards like EN 50173, ISO/IEC 60603-7 &

4 11801/IEC 60332-1, UL VW-1 with tensile strength >50N, number of insertion is 154 Nos. 189 29106.00

750(Make : Systimax/Panduit/Siemon/Legrand)

Supply, Installation, testing and commissioning of 24 port Cat 6 19" Modular

Toolless Patch Panel (loaded) enable all possible combinations of the various

types of cable (UTP, FTP, SFTP) mounted on the same panel by using various

toolless connector blocks/modules. Have a metal structure enabling them to be

durably fixed to the uprights of the 19” chassis and assuring automatic grounding

between toolless RJ-45 connectors, the panel, and the 19” uprights of the

enclosure. Include rear cable support with plastic cable guides to hold cable

5 without need for cable ties. Include quick mounting system to mount the panel 8 Nos. 6102 48816.00

into the 19” rails without use of cage-nuts. These may be used to secure the

connections of wifi access points, IP cameras, servers, or other critical devices.

Front Removal IO's option for maintenance and trouble shooting with 6 Different

Colours Labels for Labelling & Identification of Individual Ports. Tested and

guaranteed under dual circuit IEEE PoE++ up to 90W for up to 2500 on-load

connections / disconnections.

RENOVATION OF CONTROL ROOM

Supplying & Fixing of Fiber Optic Patch Cable (LC-LC), 3 Mtrs. Long, ISO/IEC-

11801-OM3 50? Duplex, LSZH,All patch cords shall conform to EIA/TIA-568C.3

and ISO/IEC-11801,Shall be Duplex Multi Mode Fiber Optic Patch Cords OM3

50?,Shall support network line speeds up to 10 Gbps.Shall have LC-LC

6 Connector connectors at the ends complete in all respect 7 Nos. 1683 11781.00

Supply and fixing Face Plate : Flush & surface mount. Polycarbonate Hi-Grade

Plastic FR Grade with ABS underplate & CRCA metal fram & UV Resistant 850

7 degree C/ Glow Wire Test. The face plate should be compatible for Cat5e, Cat6 154 Nos. 52.2 8038.80

range of RJ45 and different types of AV connectors.The face plate Size should

be of minimum 86x86mm

8 Supply and fixing of PVC Gang Box 1/2 Module 154 Nos. 49.5 7623.00

Supply, Installation, testing and commissioning of Fully Loaded OM3 12 port fully

loaded LIU with LC pigtails, for termination of multi mode fibers of size 50/125

9 μm Should meet EN50173 and ISO/IEC 11801 operating specifications. 2 Nos. 8550 17100.00

Supply, Installation, testing and commissioning of Fully Loaded OM3 24 port fully

loaded LIU with LC pigtails, for termination of multi mode fibers of size 50/125

10 μm Should meet EN50173 and ISO/IEC 11801 operating specifications. 1 Nos. 10080 10080.00

Supply and fixing of 6 core indoor/outdoor OM3 Multimode Optical Fiber of size

50/125μm. Indoor/outdoor rated with U/V stabilized sheath, Tight buffered

construction, Permanent tensile strength minimum 500N, Maximum installation

load 1500N, Impact resistance 20J, Crush resistance 3000N/100mm, Low

Smoke Zero halogen jacket, fire rated for IEC 60332-1-2, IEC 60754-1, IEC

11 60754-2, IEC 61034-2 and confirming to ISO/IEC 11801 ed2:2002 (TIA/EIA 500 Mtr. 97.2 48600.00

492AAAB) through existing GI/HDPE/ Hume pipe or on cable trays inside the

cable duct including all necessary fixing accessories e.g. cable ties, hardware

Supply, Installation, Testing and Commissioning of 42 U (600W/1000D) floor

mount rack with fans , 2 cable managers, satationary shelf , 2 Nos. of hardware

RENOVATION OF CONTROL ROOM

Supply, Installation, Testing and Commissioning of 9U (600W/600D) floor mount

13 rack with fans , 2 cable managers, 2 Nos. of hardware pkts. 2 Nos 10350 20700.00

Supply and fixing of 25mm Medium PVC Conduit with accessories

Supply, fixing of Flexible 25 MM conduit

Supply, fixing of 25MM Batten

Supply, installation, testing and commissioning of Appliance based Firewall with

3 years subscrption for around 150-300 users

Supply, Installation, Testing & Commissioning of Core switch having 24 x

10/100/1000Base t ports with 8x10G SFP+ ports with a stacking availablity port

of 240Gbps .The switch should have mechanism for variable fan speed,Should

be SDN capable / Openstack support a/OpenFlow /API support, Should support

IEEE P802.1QaZ.

Supply, Installation, Testing & Commissioning of Switch with 24 nos.

10/100/1000 Ethernet PoE Ports ,support a minimum of 4 SFP Uplinks, switch

should support 4x1G SFP module, Full-duplex Switching bandwidth of 216 Gb

pss, switch should support a total of 28 Ports, Forwarding bandwidth of 108

Gbps, support 64-Byte Packet Forwarding Rate of 71.4 Mpps,128 MB of Flash

3 memory,512 MB of DRAM,1023 VLANs,4096 VLAN IDs,16000 Unicast MAC 6 Nos. 168300 1009800.00

addresses, switch should have 370W of Available PoE Power, switch should

support 16 IPv4 Static routes, should support IPv4 unicast Static Routing.

Supply , Installation ,Testing and Commissioning of 1G Multimode optics. The

4 SFP should be from the same OEM as the switch. 12 Nos. 8955 107460.00

Supply , Installation , Testing and Commissioning of WLAN Controller should be

Hardware appliance /Software Based It should be supplied with 60 Access

Point licenses from day 1 , and should be scalable to 100 Access Point. If

Software based , hardware and OS which are being supplied have to be

specified and supplied along with the licences.

RENOVATION OF CONTROL ROOM

Supply , Installation , Testing and Commissioning of AP with 802.11 a/b/g/n/ac2

with 4x4x4 MIMO Spatial stream support and should have disaster recovery

6 mechanism automatically by taking role of controller in terms of controller 8 Nos. 35676 285408.00

Supply, Installation, testing and commissioning of IP PBX Smart Communcation

Server Equipped with 01 PRI Trunk Lines with Caller ID

16 Hybrid Extensions Port with further expandable up to 240 Ports & inbuilt

features mentioned below Extensions should be hybrid which should support

SLT, Key Phones, Answering Machine, Fax etc The system should be fully digital

The system should support PRI /BRI The system should have 8 Channel

integrated (VoIP) resources The system should support 16 Channel integrated

voice mail with 100 hour built-in recording The system should have integrated

battery charger The system should have inbuilt caller ID The system should

1 support Conference facility of 32 parties (16x2). The system should have Remote 1 Lot 265545 265545.00

Conference for 32 Party The system should have 4 session of web based video

conference(web RTC) The system should have 2 hours conversation recording

The system should have Voice mail to Email Notification The system should

have Voicemail to email notification

The system should have remote conference The system should have web based

configuration manager. The system should have 4 client of mobile extension The

system should have ACD feature(Automatic Call)

Supply, Installation, testing and commissioning of DIGITAL PHONE with 24 One

Touch Duplex Speaker with 60key DSS and should have following inbuilt

feature The key phone should have facility of dual color LED indication.-The key

phone should have 2x16 character display. The key phone should have 10 fix

2 functions keys. The key phone should have ring LED indicator.The key phone 15 Nos. 5130 76950.00

should have full hands free operation,The key phone should have adjustable

height,The key phone should have facility to connect additional console for

additional programmable keys

RENOVATION OF CONTROL ROOM

Supply, Installation, testing and commissioning of 3rd Party Voice logger System

for Voice Recording 60000 hours with PRI Card and Builtin Feature-• Appliance

• HDD: 1 TB (More than 60000 Hours talk time recording space)

• Predictive/ Preview/ Manual Dialing

• Customizable 45 Fields CRM

• Customizable Disposition

• Client info pop-up

• Call Conference

• Call Back Scheduler

3 • Live Monitoring 1 Nos. 237420 237420.00

• Call Queue management

• Lead Management

• Role Management

• MIS Reporting

• 100% Conversation Recording

• Barge-in Facility

Supply, Installation, testing and commissioning of TELEPHONE CABLES ,

4 MDF,ROSSATE BOX AND ACCESSORES 1 Set 9918 9918.00

Supply, installation, testing and commissioning of Intel Core i5 Quad Core @ 3.3

GHz or Latest, 8GB dual channel DDR3 1333/1600,Graphics NVIDIA (2 GB

dedicated) With 2-DVI/HMI output with Dual/Quad Screen card & associate

Software of operation,, 2TB 7.5K rpm SATA hard disk, PS/2 Compatible, Dual

Gigabit Ethernet, power supply provisions Cost should be With Life time license

for Windows 8 enterprise/professional or latest software compatible MacAfee

/Symantec Anti virus & All other related software such MS office with

liscesenced. The required operation & CCTV remote software etc. & Workstation

should be FCC & UL listed.

Supply, installation, testing and commissioning of online 30 KVA UPS with all the

6 accessories 1 Nos. 481050 481050.00

SUB Head ( C ) Fire Alarm System

RENOVATION OF CONTROL ROOM

Supply, installation, testing and commissioning of addressable Networkable

analogue addressable type fire alarm control panel complying to EN54 Standard

with min 640 Character / 240X64 Pixels / 5.5” graphic LCD display. The panel

should be equipped with sufficient numbers of loop with 10% spare capacity, with

each networkable intelligent fire alarm Control Panel having SLC with capacity of

min 200 detectors per loop with key pad, dual flash-based microprocessor

technology, inbuilt USB Port for upload and down load the configuration tools,

RS232 serial port for direct PC or modem connection, inbuilt NAC's, min 20

programmable Zonal LEDs and operates on 240V AC + 10% with 50 Hz with

built in charger. The panel shall have fire, fault relays, Option for BMS integration

1 MODBUS/ BACKNET, graphical software for provision of TCP/ IP modules,

Remote Access, provision of both class 'A' and class 'B' wiring in the SLC circuit,

user friendly with communication facility to monitor & control the FACPs from a

single window. The panel shall be VDS and FM approved, suitable for minimum

of 5000 event record facility, event fetch from FACP facility and the single panel

shall be suitable for min 2000 fire zones and 200 Panels/ Nodes in one network.

(The System cost shall be included of all necessary cards, modules, Panel

enclosure, CPU and associated accessories to complete the system design).

2 Loop Expandable upto 4 Loop

Supply, installation, testing and commissioning of Intellignet (Inbuilt Micro-

Controller) Analogue addressable Multi criteria (Heat + Smoke) detector with

inbuilt isolator as per EN54 Standard, Detector should be equiped with Dual

2 single-colour LEDs providing 360° cone of visibility. (For Detectors/Device 112 Nos 3375 378000.00

without inbuilt isolator. Fault Isolator or Isolator base to be provided with each

detector/device)

Supply, installation, testing and commissioning of Analogue addressable Manual

Call Point (Resettable Type) with LED indicator and in-built fault isolator as per

EN54 Standard, to be supplied with Junction Box, Glands and other mounting

3 accessories for proper installation.(Approved 8 Nos 3690 29520.00

Make:Gamewell,Advanced,Apollo,Thorn)

RENOVATION OF CONTROL ROOM

Supply, installation, testing and commissioning of Analogue Addressable Visual

Strobe having Min 10 distinct sound patterns/ multitone to indicate Exit doors

and direct occupants for safe and fast evacuation to be supplied with Junction

4 Box, Glands and other mounting accessories for proper installation. 8 Nos 3411 27288.00

Supply, installation, testing and commissioning of Analogue addressable

monitor/input module with LED indicator and in-built fault isolator as per EN54

Standard to be supplied with Junction Box, Glands and other mounting

accessories for proper installation.

Supply, installation, testing and commissioning of Operator work station with PC

having Intel Pentium I7 Processor including Serial ports (RS232) and USB ports

and following accessories etc. complete with software all as specified :

a. Minimum 8 Gigabytes of RAM memory

b. 2 TB of hard disk space

d. 21” LED colour monitor

e. Mouse with Mouse Pad

f. Standard Key Board

g. Latest Windows Operating System

h. Compatible Fire Alarm System Control Software

i. Laser Printer colour A4- 1 No

j. Software for Automatic Fire Detection and Alarm System

k. UPS 600 VA or better

Supply, Laying, Testing and commissioning of 2x1.5 sqmm Plain annealed

copper wire, multistrand,Special mix Silicon Rubber,Thermoplastic Low Smoke,

Halogen Free - LSZH,Galvanized Steel Wires,RAMFIRECRO –F3 - FIRE

RESISTANT – LSZH – LPCB 568e/01 - BS 6387

2x1,5 mmq - CU/Sil/LSZH/SWA/LSZH - ARMOURED - MADE IN ITALY +

BATCH N,Thermoplastic Low Smoke, Halogen Free - LSZH.

RENOVATION OF CONTROL ROOM

Supply, installation, testing and commissioning of Analogue addressable

Control/Output module with LED indicator and in-built fault isolator as per EN54

Standard to be supplied with Junction Box, Glands and other mounting

8 accessories for proper installation. 8 Nos 2934 23472.00

Supply, installation, testing and commissioning of Response/Remote Indicator

which consists of steady glowing LED. This LED shall be mounted within a

Polycarbonate box and connected in parallel to the built in indicator of the

9 detector as per specifications. The RI shall come "ON" as soon as the detector 55 Nos 337.5 18562.50

activates complete in all respects as per specification.

Total Amount Head (A+B+C) Contol Room 5717139.30

Total Amount Head (A+B+C) Contol Room 5717139.30

RENOVATION OF RECEPTION

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

RENOVATION OF RECEPTION

SL. NO. Description of Item Quantity Unit Rate Amount

Demolishing stone rubble masonry manually/ by mechanical means including stacking

1 15.9 of serviceable material and disposal of unserviceable material within 50 metres lead as 70.72 Sqm 2027.1 143356.51

per direction of

15.9.2 In Cement Mortor

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper shape, raking out joints and preparing and

plastering the surface of the walls complete, including disposal of rubbish to the

dumping ground, all complete as per direction of Engineer-in-Charge.

14.1.1 With Cement Mortar (1 Cement : 4 Fine Sand) 110 Sqm 462.3 50853.00

P&F NEOLITH PANELS ON ALUMINUM FRAMEWORK OF APPROVED DESIGN

3 NDSR AND SHADE IN DRY CLADDING. ALUMINUM FRAMEWORK BEHIND THE PANELS 120.32 SQM 8018 964705.85

SHALL BE PAID EXTRA

Providing and laying machine cut, mirror polished, Italian Marble stoneflooring laid in

required pattern in linear portion of the building all complete

as per architectural drawings, with 18 mm thick stone slab laid over 20mm (average)

thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with white cement slurry @ 4.4 kg/sqm includingpointing with

white cement slurry admixed with pigment to match the

4 11.51 marble shade including rubbing, curing andpolishing etc. all completeas specified and 0

as directed by the Engineer-in-Charge.

RENOVATION OF RECEPTION

11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, 70.72 Sqm 6095.5 0 431073.76

Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with

extruded built up standard tubular sections/appropriate Z sections and other sections of

approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired

dia and size, including necessary filling up the gaps at

5 21.1 junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. 0

Aluminium sections shall be smooth, rust free,

For Fixed Portion 0

Powder coated aluminium (minimum

thickness of powder coating 50 micron) 55.23 kg 466.3 0 25753.75

Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions

etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings

and the directions ofengineer-in-charge . (Cost of aluminium snap beading shall be paid

in basic item):

With float glass panes of 5 mm thickness (weight noless than 12.50 kg/sqm) 11.34 Sqm 1325.55

FOR CLADDING FRAMEWORK 0

POLISHING WORKS ON EXISTING DOORS AS PER APPROVED DESIGN AND

Providing & fixing of Roller Blinds as per the approved sample with fabric made up of

28% Polyesterand 68% PVC 4% alumlnlum layer on the back, l2Stex Tilter Basket

8 NDSR weave of thickness O.S3mm tS% (ISO 2286-2) and wleghing 407gsmt5% with openess 18.9 each 2108 39838.64

factor of 5% .The tear resistance (Warp 172Nt10% & ,Weft 153NH0%) As per ISO

544674, and pass NFPA 701 Fire Resistnncc test

Providing & fixing 12mm plane clear toughened glass door along with complete patch

9 NDSR fitting (Floor spring), top & vottom lock handle ( Ozone make) and silicon sealant filling 12 Sqm 6144 73723.72

RENOVATION OF RECEPTION

10 NDSR Supply ,Installation ,Testing and Commissioning of SPOT LIGHTS 10 EACH 2046.6 20466.00

11 NDSR Supply ,Installation ,Testing and Commissioning of TRACK light 2 EACH 3497.4 6994.80

12 NDSR Supply ,Installation ,Testing and Commissioning of SURFACE LIGHTS 12 EACH 906.3 10875.60

13 NDSR Supply ,Installation ,Testing and Commissioning of STRIP LIGHTS 26 EACH 648 16848.00

Supply ,Installation ,Testing and Commissioning of 1.5 Ton 3Star Split AC including 3

14 NDSR meter refrigenct pipe as per approved makes 2 Each 35802.9 71605.80

Supply and fixing Refrigerant pipe for 1.5 Tr ( after 3 meter) & Drain Piping

Supply ,Installation ,Testing and Commissioning of Voltage stablizer for AC (4 KVA)

TOTAL FOR RECEPTION 1888335.05

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

RENOVATION OF Diretor study ROOM

Description of Item Rate

Sl. No. Quantity Unit Amount (In Rs)

Item DSR NDSR

Dismantling wooden boardings in lining of walls and partitions, including stacking

1 15.39.3 within 50 metres lead (thickness above 25 mm upto 40 mm)

Extra for Carriage of materials upto 0.5 Km

Dismantling stone slab flooring laid in cement mortar including

stacking of serviceable material and disposal of unserviceable materialwithin 50

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper shape, raking out joints and preparing and

plastering the surface of the walls complete, including disposal of rubbish to the

4 14.1 dumping ground, all complete as per direction of Engineer-in-Charge.

With Cement Mortar (1 Cement : 4 Fine Sand)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below 3 Each 302.7 908.10

Dismantling cement asbestos or other hard board ceiling or partition walls including

stacking of serviceable materials and disposal of unserviceable materials within 50

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by the

manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of

approved brand & manufacturer, in allcolours and shade, in skirting, riser of steps,

7 11.47 laid with cement basedhigh polymer modified quick set tile adhesive (water based)

conformingto IS: 15477, in average 6 mm thickness, including grouting of

joints(Payment for grouting of joints to be made separately).

Size of Tile 1000x1000 mm

Grouting the joints of flooring tiles having joints of 3 mm width, usingepoxy grout mix

of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of

resin per kg), including filling /grouting and finishing complete as per direction of

8 11.48 Engineer-in-charge.

Providing and fixing false ceiling at all height including providing andfixing of frame

work made of special sections, power pressed fromM.S. sheets and galvanized with

zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of

angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm,

at1200 mm centre to centre, one flange fixed to the ceiling .......

12.5 mm thick tapered edge gypsum plain board

conforming to IS: 2095- (Part I) :2011 (Board with BIS

12.45.1 certification marks) 26 Sqm 1145.95 29794.7

Providing and fixing tiled false ceiling of specified materials of size595x595 mm in

true horizontal level, suspended on inter lockingmetal grid of hot dipped galvanized

steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main

10 12.52 "T" runnerwith suitably spaced joints to get required length and of size 24x38mm

made from 0.30 mm thick (minimum) sheet, spaced at

12.5 mm thick square edge PVC Laminated Gypsum

Tile of size 595x595 mm, made of Gypsum plasterboard,

manufactured from natural gypsum as per IS 2095 part I

12.52.3 and laminated with white 0.16mm thick fire retardant 42.16 SQM 1948.95 82167.732

PVC film on the face side and 12micron metalized

polyester on the back side with all edges sealed with

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :

Two or more coats on new work

Providing and applying plaster of paris putty of 2 mm thickness over

plastered surface to prepare the surface even and smooth complete

Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with

extruded built up standard tubular sections/appropriate Z sections and other sections

of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners

ofrequired dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket

etc. Aluminium sections shall be smooth, rust free,

21.1 For fixed portion

Powder coated aluminium (minimum

14 21.1.1.2 thickness of powder coating 50 micron) 68.0 Kg 466.3 31699.07

For shutters of doors, windows & ventilators including providing and fixing hinges/

pivots and making provision for fixing of fittings wherever required including the cost

21.1.2 of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilatorshutters and

partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the

21.3 architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium

snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight noless than 12.50 kg/sqm)

Providing and fixing stainless steel (SS 304 grade) adjustable frictionwindows stays of

approved quality with necessary stainless steelscrews etc. to the side hung windows

as per direction of Engineerin-charge complete.

Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick &

2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium

21.12.2 tubular handle bar 6 each 563.5 3381.00

POLISHING WORKS ON EXISTING DOORS AS PER APPROVED DESIGN AND

Providing and fixing cupboard shutter with 19mm thick one side 9.45 Sqm 2563.75 24227.4375

decorative and other side balancing lamination factory pressed BWP

grade marine ply as per IS 710 of approved brand including 2mm thick

PVC edge banding tape with hot glue by edge bending machine etc.

19 9.168 with auto closing spring loaded hinges (hydraulic type) etc. complete

as per direction of Engineer-in-charge.(Payment of providing and fixing

auto closing hinges shall be paid separately)

Providing and fixing 18mm thick both sides Pre-laminated cement bonded

wood particle board as per IS : 15786:2008 of approved brand and shade

with suitable full threaded steel screws etc. in partitions, boxes, shelves,

20 9.166 racks and cupboard, kitchen cabinet under kitchen counter etc. all

complete as per direction of Engineer-in-charge (Note: Fittings to be

paid separately).

Providing and fixing special quality bright finished brass cupboard or

ward robe locks with four levers of approved quality including necessary

screws etc. complete.

Providing and fixing magnetic catcher of approved quality in cupboard /

22 9.114 ward robe shutters, including fixing with necessary screws etc. complete.

Triple strip vertical type 6 Each 44.85 269.1

Providing and fixing bright finished brass handles with screws etc.

23 9.81 complete

Providing and fixing IS : 12817 marked stainless steel butt hinges with

24 9.7 stainless steel screws etc. complete :

25 NDSR Supply ,Installation ,of ARMSTRONG OPTRA wall panels 600X600X25 mm /

1200X600X25 mm with impellers 42.9 SQM 4440.6 190501.74

Providing & fixing of Roller Blinds as per the approved sample with fabric made up of

28% Polyesterand 68% PVC 4% alumlnlum layer on the back, l2Stex Tilter Basket

weave of thickness O.S3mm tS% (ISO 2286-2) and wleghing 407gsmt5% with

26 NDSR openess factor of 5% .The tear resistance (Warp 172Nt10% & ,Weft 153NH0%) As 14.4 Sqm 2107.8 30352.32

per ISO 544674, and pass NFPA 701 Fire Resistnncc test

Supply ,Installation ,Testing and Commissioning of 1.5 Ton 3Star Split AC including 3

meter refrigenct pipe as per approved makes

Supply and fixing Refrigerant pipe for 1.5 Tr ( after 3 meter)

Supply ,Installation ,Testing and Commissioning of Voltage stablizer for AC (4 KVA)

Supply ,Installation ,Testing and Commissioning of SPOT LIGHT, sample as per

approved by Engineer-In-charge.

Supply ,Installation ,Testing and Commissioning of Track Light sample as per

approved by Engineer-In-charge.

Supply ,Installation ,Testing and Commissioning of STRIP LIGHT sample as per

32 NDSR approved by Engineer-In-charge. 26 METRE 648 16848.00

Supply ,Installation ,Testing and Commissioning of SURFACE LIGHTS sample as

per approved by Engineer-In-charge.

Total NDSR 357240.96

GRAND TOTAL 792257.91

GRAND TOTAL 792257.91

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

RENOVATION OF Director ROOM

Sl. No. Description of Item Quantity Unit Amount

Item DSR NDSR

Dismantling wooden boardings in lining of walls and partitions, including

1 15.39.3 stacking within 50 metres lead (thickness above 25 mm upto 40 mm)

Extra for Carriage of materials upto 0.5 Km

Repairs to plaster of thickness 12 mm to 20 mm in patches of

area 2.5 sq.meters and under, including cutting the patch in

proper shape, raking out joints and preparing and plastering

3 14.1 the surface of the walls complete, including disposal of rubbish

to the dumping ground, all complete as per direction of

Engineer-in-Charge.

14.1.1 With Cement Mortar (1 Cement : 4 Fine Sand) 20 Sqm 462.3 9246.00

Dismantling doors, windows and clerestory windows (steel or

wood) shutter including chowkhats, architrave, holdfasts etc.

complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Providing and fixing false ceiling at all height including

providing andfixing of frame work made of special sections,

power pressed fromM.S. sheets and galvanized with zinc

5 12.45 coating of 120 gms/sqm (bothside inclusive) as per IS : 277

and consisting of angle cleats of size25 mm wide x 1.6 mm

thick with flanges of27 mm and 37mm, at1200 mm centre to

centre, one flange fixed to the ceiling

12.5 mm thick tapered edge gypsum plain board

conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

Providing and fixing tiled false ceiling of specified materials of

595x595 mm in true horizontal level, suspended on inter

metal grid of hot dipped galvanized steel sections ( galvanized

120 grams/ sqm, both side inclusive) consisting of main "T"

with suitably spaced joints to get required length and of size

mm made from 0.30 mm thick (minimum) sheet, spaced at

12.5 mm thick square edge PVC Laminated Gypsum

Tile of size 595x595 mm, made of Gypsum plasterboard,

manufactured from natural gypsum as per IS 2095 part I

12.52.3 and laminated with white 0.16mm thick fire retardant 25.48 SQM 1948.95 49659.25

PVC film on the face side and 12micron metalized

polyester on the back side with all edges sealed with

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :

Two or more coats on new work

Providing and applying plaster of paris putty of 2 mm thickness

plastered surface to prepare the surface even and smooth

Providing and fixing aluminium work for doors, windows,

ventilatorsand partitions with extruded built up standard tubular

sections/appropriate Z sections and other sections of approved

makeconforming to IS: 733 and IS: 1285, fixing with dash

fasteners ofrequired dia and size, including necessary filling up

junctions, i.e. at top, bottom and sides with required EPDM

rubber/neoprene gasket etc. Aluminium sections shall be

smooth, rust free,

21.1.1 For fixed portion

Powder coated aluminium (minimum

21.1 thickness of powder coating 50 micron) 57.35 kg 466.3 26742.31

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost

7 21.1.2 of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

Powder coated aluminium (minimum

21.1.2.2 thickness of powder coating 50 micron) 23.4 kg 564.8 13216.32

Providing and fixing glazing in aluminium door, window,

ventilatorshutters and partitions etc. with EPDM rubber /

8 21.3 neoprene gasketetc. complete as per the architectural

drawings and the directions ofengineer-in-charge . (Cost of

aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight noless than

Providing and fixing stainless steel (SS 304 grade) adjustable

frictionwindows stays of approved quality with necessary

9 21.11 stainless steelscrews etc. to the side hung windows as per

direction of Engineerin-charge complete.

Providing and fixing aluminium tubular handle bar 32 mm outer

dia,3.0 mm thick & 2100 mm long with SS screws etc

.complete as per direction of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium

21.12.2 tubular handle bar 6 each 563.5 3381.00

Dismantling cement asbestos or other hard board ceiling or

partition walls including stacking of serviceable materials and

11 15.41 disposal of unserviceable materials within 50 metres lead. 25.48 Sqm 46.5 1184.82

Providing and laying Vitrified tiles in different sizes (thickness to

bespecified by the manufacturer), with water absorption less

than 0.08%and conforming to IS: 15622, of approved brand &

manufacturer, in allcolours and shade, in skirting, riser of steps,

12 11.47 laid with cement basedhigh polymer modified quick set tile

adhesive (water based) conformingto IS: 15477, in average 6

mm thickness, including grouting of joints(Payment for grouting

of joints to be made separately).

Grouting the joints of flooring tiles having joints of 3 mm width,

usingepoxy grout mix of 0.70 kg of organic coated filler of

desired shade(0.10 kg of hardener and 0.20 kg of resin per

kg), including filling /grouting and finishing complete as per

direction of Engineer-in-charge.

POLISHING WORKS ON EXISTING DOORS AS PER

14 13.116 APPROVED DESIGN AND SHADE 15.12 sqm 1156.55 17487.04

TOTAL DSR 290788.72

Removing of Carpet Flooring

16 NDSR Supply ,Installation ,of ARMSTRONG OPTRA wall panels

600X600X25 mm / 1200X600X25 mm with impellers 48.48 SQM 4440.6 215280.29

Providing & fixing of Roller Blinds as per the approved sample

with fabric made up of 28% Polyesterand 68% PVC 4%

alumlnlum layer on the back, l2Stex Tilter Basket weave of

thickness O.S3mm tS% (ISO 2286-2) and wleghing

407gsmt5% with openess factor of 5% .The tear resistance

(Warp 172Nt10% & ,Weft 153NH0%) As per ISO 544674,

and pass NFPA 701 Fire Resistnncc test.Solar

trnnsmlttance,Ts%(11).Solar reflectance Rs%(45).Solar

Absortance As%(44),Light Trarumiltllnce Tv%(4) & UV

transmittance Tuv%(7).The control clutch drive unit engineered

heavy duty chain drive pulley operating sytem consisbng of

17 NDSR gear clutch housing and locking plug containing minimum 6 7.2 Sqm 2107.8 15176.16

rib! and inerted at minimum of 37mm into roller rube. It Is

selflubrtcaling Exclusive dutch wltb safety pin for"""'"' bracket

Installation and unlocking pm for quick manual removal.

Universal clutch Is most convenient for large windows uown to

thesmallest windows. It shall be driven by a ball chain pulley

with ball ch in and can be positioned at Right hnnd or Left

hand side of lhe shade. Clutch gear ration l.75:1for reduced

operating force on larger blinds.

Tube bearing plug idler Exclusive sclfluhricadng spring loaded

plast1cbearing end plug with positive locking wheel allows for

adjustment and provides for a secure Installation and removal

LIGHTINING, AC 0

Supply ,Installation ,Testing and Commissioning of 1.5 Ton 3Star Split AC

including 3 meter refrigenct pipe as per approved makes

Supply and fixing Refrigerant pipe for 1.5 Tr ( after 3 meter)

Supply ,Installation ,Testing and Commissioning of Voltage stablizer for

Supply ,Installation ,Testing and Commissioning of SPOT LIGHT, sample

20 NDSR as per approved by Engineer-In-charge. 8 Each 2046.6 16372.80

Supply ,Installation ,Testing and Commissioning of Track Light sample as

21 NDSR per approved by Engineer-In-charge. 2 Each 3497.4 6994.80

Supply ,Installation ,Testing and Commissioning of STRIP LIGHT sample

as per approved by Engineer-In-charge.

Supply ,Installation ,Testing and Commissioning of SURFACE LIGHTS

sample as per approved by Engineer-In-charge.

Total NDSR 358844.15

GRAND TOTAL 649632.86

GRAND TOTAL 649632.86

RENOVATION OF Deputy Director ROOM

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

RENOVATION OF Deputy Director ROOM

Sl. No. Description of Item Quantity Unit Amount

Item 2021 DSR NDSR

Dismantling wooden boardings in lining of walls and partitions, including stacking

within 50 metres lead

(thickness above 25 mm upto 40 mm)

Extra for Carriage of materials upto 0.5 Km

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper shape, raking out joints and preparing and

plastering the surface of the walls complete, including disposal of rubbish to the

dumping ground, all complete as per direction of Engineer-in-Charge.

With Cement Mortar (1 Cement : 4 Fine Sand)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below 2 Each 302.7 605.40

RENOVATION OF Deputy Director ROOM

Dismantling cement asbestos or other hard board ceiling or partition walls including

stacking of serviceable materials and disposal of unserviceable materials within 50

Cost Repairing Works (A) 15753.29

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by the

manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of

approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid

with cement basedhigh polymer modified quick set tile adhesive (water based)

conformingto IS: 15477, in average 6 mm thickness, including grouting of joints

(Payment for grouting of joints to be made separately).

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade

(0.10 kg of hardener and 0.20 kg of resin per kg), including filling /

grouting and finishing complete as per direction of Engineer-in-charge.

Size of Tile 1000x1000 mm

RENOVATION OF Deputy Director ROOM

Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with

extruded built up standard tubular sections/appropriate Z sections and other sections

of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners

ofrequired dia and size, including necessary filling up the gaps atjunctions, i.e. at top,

bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium

sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever

required includingcleat angle, Aluminium snap beading for glazing / paneling,

C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the

directions of Engineer-in-charge.

Powder coated aluminium (minimum

21.1.1.2 thickness of powder coating 50 micron) 57.35 Kg 419.67 24068.07

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

Powder coated aluminium (minimum 23.4 Kg

thickness of powder coating 50 micron)

RENOVATION OF Deputy Director ROOM

Providing and fixing glazing in aluminium door, window, ventilatorshutters and

partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the

architectural drawings and the directions ofengineer-in-charge . (Cost of aluminium

snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight noless than 12.50 kg/sqm) 12.6 Sqm

Providing and fixing stainless steel (SS 304 grade) adjustable frictionwindows stays of

approved quality with necessary stainless steelscrews etc. to the side hung windows

as per direction of Engineerin-charge complete.

255 X 19 mm 6 Each

Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick &

2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium Each

21.12.2 tubular handle bar 6 507.15 3042.90

RENOVATION OF Deputy Director ROOM

Providing and fixing cupboard shutter with 19mm thick one side

decorative and other side balancing lamination factory pressed BWP

grade marine ply as per IS 710 of approved brand including 2mm thick

13 9.168 PVC edge banding tape with hot glue by edge bending machine etc. 9.45 Sqm 2563.75 0 24227.4375

with auto closing spring loaded hinges (hydraulic type) etc. complete

as per direction of Engineer-in-charge.(Payment of providing and fixing

auto closing hinges shall be paid separately)

Providing and fixing 18mm thick both sides Pre-laminated cement bonded

wood particle board as per IS : 15786:2008 of approved brand and shade

with suitable full threaded steel screws etc. in partitions, boxes, shelves,

racks and cupboard, kitchen cabinet under kitchen counter etc. all

complete as per direction of Engineer-in-charge (Note: Fittings to be

paid separately).

Providing and fixing special quality bright finished brass cupboard or

15 9.79 ward robe locks with four levers of approved quality including necessary 0

screws etc. complete.

RENOVATION OF Deputy Director ROOM

Providing and fixing magnetic catcher of approved quality in cupboard /

ward robe shutters, including fixing with necessary screws etc. complete.

9.114.1 Triple strip vertical type 6 Each 44.85 0 269.1

Providing and fixing bright finished brass handles with screws etc.

Providing and fixing IS : 12817 marked stainless steel butt hinges with

stainless steel screws etc. complete :

POLISHING WORKS ON EXISTING DOORS AS PER APPROVED DESIGN AND

Providing & fixing of Roller Blinds as per the approved sample with fabric made up of

28% Polyesterand 68% PVC 4% alumlnlum layer on the back, l2Stex Tilter Basket

weave of thickness O.S3mm tS% (ISO 2286-2) and wleghing 407gsmt5% with

21 NDSR openess factor of 5% .The tear resistance (Warp 172Nt10% & ,Weft 153NH0%) As 7.2 each 2107.8 15176.16

per ISO 544674, and pass NFPA 701 Fire Resistnncc test

P&F POP FALSE CEILING INCLUDING FRAMEWORK AND WIRING LOCATIONS

RENOVATION OF Deputy Director ROOM

COST OF RENOVATION WORKS 269878.75

LIGHTINING, AC 0

Supply ,Installation ,Testing and Commissioning of 1.5 Ton 3Star Split AC including 3

meter refrigenct pipe as per approved makes

Supply and fixing Refrigerant pipe for 1.5 Tr ( after 3 meter)

Supply ,Installation ,Testing and Commissioning of Voltage stablizer for AC (4 KVA)

Supply ,Installation ,Testing and Commissioning of SPOT LIGHT, sample as per

25 NDSR approved by Engineer-In-charge. 5 Each 2046.6 10233.00

Supply ,Installation ,Testing and Commissioning of Track Light sample as per

26 NDSR approved by Engineer-In-charge. 1 Each 3497.4 3497.40

Supply ,Installation ,Testing and Commissioning of STRIP LIGHT sample as per

27 NDSR approved by Engineer-In-charge. 12 METRE 648 7776.00

Supply ,Installation ,Testing and Commissioning of SURFACE LIGHTS sample as per

28 NDSR approved by Engineer-In-charge. 6 EACH 906.3 5437.8

COST OF LIGHTINING, AC 72306.90

RENOVATION OF AUDITORIUM

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

RENOVATION OF AUDITORIUM

SL. NO. DSR-2021 ITEM Description of Item Quantity Unit Rate Amount

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including

stacking within 50 metres lead

15.39.2 Thickness above 10 mm up to 25 mm 248 Sqm 64.15 15909.20

2 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm 238 Sqm 60.5 14399.00

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of

3 15.57 unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in- 238 Sqm 46.5 11067.00

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS:

2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) :

6.3.1 With F.P.S.(non modular) bricks 17.28 cum 8030.6 1,38,768.77

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the

patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including

5 14.1 disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

14.1.1 With Cement Mortar (1 Cement : 4 Fine Sand) 30 Sqm 462.3 13869.00

ACOUSTIC PANELS

Providing and Fixing Wall Panelling as per design to provide sufficient sound insulation. The Panelling Design is a

combination of Neolith Tiles and Non woven fabric. The panelling shall be done with a dry cladding system of

Aluminum framework.

RENOVATION OF AUDITORIUM

7 12.31 P&F Plaster of Paris False ceiling as per design with Cove for lighting

12.31.2 For Curved Surface 132.6 Sqm 1708.5 226547.10

8 12.33 Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above5 metres height from floor leve 132.6 Sqm 218.5 28973.10

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :

277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200

mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire

at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30

mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm

long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel

with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish

of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification

and direction of

12.5 mm thick tapered edge gypsum moisture resistant board

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water

absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and

11 11.47 shade, in skirting, riser of steps, laid with cement based

high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness,

including grouting of joints (Payment for grouting of joints to be made separately).

25 mm wooden planking, tongued and grooved in flooring, including fixing

with iron screws complete with :

INTERNAL WIRING

RENOVATION OF AUDITORIUM

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed

13 1.1 medium class PVC conduit, with modular switch, modular plate, suitable GI box and

earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell

point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

14 1.55 conductor single core cable in surface/ recessed PVC conduit, and earthing the

point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4

sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing

Circuit / sub main wiring in PVC Conduit 800 Meter 200 1,60,000.00

Supplying and fixing metal box of following sizes (nominal size) on surface or in

recess with suitable size of phenolic laminated sheet cover in front including painting

Supplying and fixing suitable size GI box with modular plate and cover in front on

17 1.31 surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket

outlet and 5/6 amps modular switch, connection etc. as required.

S/F power plug point modular type accesDSRies 50 Each 401 20,050.00

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont

18 1.32 on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and

15/16 amps modular switch, connection etc. as required.

S/Fmodular type electronic fan regulator 50 Each 495 24,750.00

19 NDSR Supply, Installation , Testing, Commissiong of track spot light 10W 40 Each 2046.6 81,864.00

20 NDSR Supply, Installation , Testing, Commissiong of tracklight 50 Each 3497.4 1,74,870.00

21 NDSR Supply, Installation , Testing, Commissiong of striplight 30 Each 648 19,440.00

RENOVATION OF AUDITORIUM

22 NDSR Supply, Installation , Testing, Commissiong of surface NEO 10W LED 40 Each 906.3 36,252.00

AV System including Automation, Projectors, Sound System, Video Conferencing, Mic, Projector Screen including

23 NS all cabling and fixing complete in all respect, Design, Scheme should be approved by Engineer In charge before 16517514.6 16517514.60

24 NS Providing and fixing of wooden fire cum acoustic door as per BS 476 part 20 22 IS 3614 part 1, part 2, for stability. 19.32 SQM 18211.5 351846.18

25 NS Providing and fixing SS BALL BEARING HINGES 32 EACH 505.8 16185.60

26 NS Providing and fixing Single Point Locking panic bar 8 EACH 8757.9 70063.20

27 NS Providing and fixing Double Point Locking Panic Bar 4 EACH 11348.1 45392.40

28 NS Providing and fixing Panic trim of DORMA PHCRT 4 EACH 7696.8 30787.20

29 NS Providing and fixing DASH fastner of size 10*160mm 44 EACH 160.2 7048.80

30 NS Providing and fixing set of Acoustic seals 4 EACH 13599.9 54399.60

Miscellanous Works

Miscellanous Works

SL. NO. DSR ITEM Description of Item NO. Quantity Unit Rate Amount

Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material

1 15.7 within 50 metres lead as per direction of Engineer-in-charge.

In Cement Mortor

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Providing and fixing in position collapsible steel shutters with vertical

channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm

size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia

15 mm cement plaster on rough side of single or half brick wall of mix 1)

4 13.2.1 1: 4 Cement and Fine Sand 1 100 Sqm 339.7 33970.00

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :

3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size)

over 75mm thick bed of dry brick ballast 40 mm nominal size, well

5 4.17 rammed and consolidated and grouted with fine sand, including necessary 1 500 Sqm 681.65 340825.00

excavation, levelling & dressing & finishing the top smooth.

Miscellanous Works

Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level in

6 6.4 all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing aluminium die cast body tubular type universal

hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on

the body, door weight upto 35 kg and door width upto 700 mm), with

necessary accessories and screws etc. complete.

Supplying and laying multipurpose 12mm thick polyutherene sandwich

system (Tested as per EN 14904 for BWF, FIBA, & IHF standards),

rubber based flooring in multipurpose hall consisting of a technically

advanced elastic layer which prevents damage to joints and the other

injury, having five components – (refer tender drawings for section)

• First/ bottom layer: high grab strength, 2-part poly utherene adhesive

over prepared surface of flooring

• Second layer: Elastic Layer 10mm thick (Made in Germany) with the

following specifications of volumetric weight 750-775 gm/m², tensile

8 NDSR strength 0.60N/mm² and force reduction ≥25%. 1 551.25 Sqm 3150.00 1736437.50

• Third layer: 2- part polyurethane pore sealer.

• Fourth layer: 2mm, 2-part polyurethane self levelling wear coat that

ensurea exceptional durability.

• Fifth Layer/ Top layer: 2-part aliphatic polyurethane topcoat with very

high abrasion resistance, as well as stain resistant.

• Line marking as per the requirement of the games / direction of engineer

Providing and laying in- situ Synthetic Athletic Track of mininum 12mm

thick with Line markings on the surface by sandwitch system which

include SBR/ Binding material of thickness 8mm and 4mm thick EPDM

9 NDSR rubber and all complete as per requirements as per direction of the 1 551.25 Sqm 2250.00 1240312.50

Engineer-in-charge. the colour of EPDM will be finalised by Engineer

Miscellanous Works

Supply ,Installation ,Testing and Commissioning of 1.5 Ton 3Star Split AC

Supply ,Installation ,Testing and Commissioning of 2.0Ton 3 Star Split

11 NDSR AC with 3 meter copper pipes and drain 20 20 Each 43149.12 862982.42

Supply ,and fixing Refrigerant pipe for 1.5 Tr & 2 Tr and drain pipining etc

12 NDSR complete above 3 meter. 120 120 Rmtr 1048.49 125818.33

Supply and fixing 4 KVA Stablizer.

Supply and fixing 5 KVA Stablizer.

Providing & fixing of Roller Blinds as per the approved sample with fabric

made up of 28% Polyesterand 68% PVC 4% alumlnlum layer on the back,

l2Stex Tilter Basket weave of thickness O.S3mm tS% (ISO 2286-2) and

14 NDSR wleghing 407gsmt5% with openess factor of 5% .The tear resistance 1 176.4 Sqm 2107.86 371827

(Warp 172Nt10% & ,Weft 153NH0%) As per ISO 544674, and pass

NFPA 701 Fire Resistnncc test

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

Description of Item

SL. NO. DSR 2021 Quantity Unit Rate Amount

DEMOLITION & REPAIR WORKS

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel

bars and disposal of unserviceable material within 50 metres lead as per direction of

Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable material within 50 metres lead as

per direction of Engineer-in-charge.

In cement mortar

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and

under, including cutting the patch in proper shape, raking out joints and preparing and

plastering the surface of the walls complete, including disposal of rubbish to the

dumping ground, all complete as per direction of Engineer-in-Charge.

With Cement Mortar (1 Cement : 4 Fine Sand)

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with

manual Chisel and/ or by standard power driven percussion type or of approved make

including tapering of all edges, making square shoulders of cavities including cleaning

the exposed concrete surface and reinforcement with wire brushes etc. and disposal of

debris for all lead and lifts all complete as per direction of Engineer-In-Charge

75mm average thickness

50mm average thickness

25 mm average thickness

COST OF DEMOLITION AND REPAIR WORKS 238456

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation

7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 36.8 CUM 8288.35 305011.28

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 20 SQM 1018.05 20361.00

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias

and similar locations of required size, approved shade, colour and texture laid over 20

3 8.2 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab upto 0.50 sqm

Area of slab over 0.50 sqm.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,

including machine polishing to edge to give high gloss finish etc. complete as per

design approved by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in

5 8.4 facia and drops of width upto 150 mm with epoxy resin based adhesive, including 50 METRE 475.55 23777.50

cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in

kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,

6 8.5 including necessary holes for pillar taps etc. including moulding, rubbing and polishing 10 EACH 808.15 8081.50

of cut edges etc. complete.

Designing, providing, installing and fixing factory finished custom designed cold form

Light Gauge Steel Framed super structure comprising of steel wall panel, trusses,

purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design

requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy

coated steel having minimum yield strength 300-550 Mpa) conforming to AISI

specifications and IBC 2009 for cold formed steel framing and construction and also as

per IS: 875-1987, ISO 8001984 and IS:801- 1975. The wind load shall be as per

provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using

commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-

V8i/ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of

Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist

Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing

Sections, L-Shaped Angles for better structural stability. The framing section shall be

7 26.41 cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in 9500 kg 235.70 2239150.00

required length as per structural design requirement duly punched with dimple/slot at

required locations as per approved drawings. The slots will be along centre line of

webs and shall be spaced minimum 250mm away from both ends of the member. The

frame can be supplied in panelized or knock down condition in specific dimensions

and fastened with screws extending through the steel beyond by minimum of three

exposed threads. All self drilling tapping screws for joining the members shall have a

Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection

of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab

or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia

as per approved drawings. design subject to minimum 12mm diameter and 121mm

length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of

100mm in RCC (RCC to be paid separately) and located not more than 300mm from

corners or termination of bottom tracks complete in all respects. The item also includes

the submission of stability reports duly examined and issued by any NIT/IIT. The rate

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by the

manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of

approved brand & manufacturer, in allcolours and shade, in skirting, riser of steps, laid

with cement basedhigh polymer modified quick set tile adhesive (water based)

conformingto IS: 15477, in average 6 mm thickness, including grouting of

joints(Payment for grouting of joints to be made separately).

Size of Tile 1000x1000 mm

Grouting the joints of flooring tiles having joints of 3 mm width, usingepoxy grout mix of

0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of

9 11.48 resin per kg), including filling /grouting and finishing complete as per direction of

Engineer-in-charge.

Size of Tile 1000x1000 mm

Providing and fixing of external wall system on Light gauge steel frame work with .

Outer face having 6mm thick heavy duty fiber cement board fixed on 9mm thick heavy

duty fiber cement board confirming to IS 14862:2000, category IV type A (High

pressure steam cured) as per standard sizes fixed with self-drilling / taping screws /

fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be

maintained and groves shall be sealed with silicon based sealant. The board shall be

fixed in a staggered pattern.Screws shall be of counter sunk rib head of 1.60mm to 4

10 26.42 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm and internal face

12.5mm thick gypsum plaster board fixed on 8mm thick fiber cement board confirming

to IS 14862:2000 of category III type B (High pressure steam cured) as per standard

sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make,

proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic

based jointing compound for seamless finish.(cost of frame work to be paid for

Outer face: Outer face having 6mm thick fiber cement board fixed on 9mm thick fiber

cement board, Type A, as per IS:14862:2000 (high pressure steam cured) Inner Face :-

26.42.1 12.5 mm thick gypsum plaster board conforming to IS 2095:2011 fixed on 8 mm thick 600 sqm 3485.2 2091120.00

fibre cement board confirming to IS:14862:2000 of type B (High pressure steam cured)

Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm

thick gypsum plaster board conforming IS 2095:2011 fixed on 8mm thick fiber cement

board conforming to IS 14862:2000 of category III type B (High pressure steam cured)

as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of

approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of

11 26.43 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be

done using fiber mesh tape and epoxy and acrylic based jointing compound for

seamless finish.(cost of frame work to be paid for separately)

Cement Fiber Board 8 mm thick as per IS 14862:2000

of type B (High pressure Steam Cured)

Providing and fixing in all exterior face panels breathable vapour barrier underneath

the cement fiber board as per National Building Code 2009 complete as per direction

of Engineer-in-charge.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming

to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene

Bags fixed to wall with screw,

13 12.57 rawel plug & washers and held in position by criss crossing GI wire etc. complete as 192 SQM 307.35 59011.20

per directions of Engineer-in-Charge.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH)

of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire

Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000

mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T

of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm

suspended from ceiling using galvanized mild steel item galvanised@80gsm) 50 mm

long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger

rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at

14 26.27 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls

/partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of

0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm

centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all

T-sections used in false ceiling support system shall be pre-painted with polyester

baked paint, for all heights. The work shall be carried out as per specifications,

drawings and as per directions of the engineer-incharge.

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections

of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium

sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever

required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.

brass / stainless steel screws, all complete as per architectural drawings and the

directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for

For fixed portion

Polyester powder coated aluminium

(minimum thickness of polyester powder

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision for fixing of fittings wherever

required including the cost of EPDM rubber / neoprene gasket required (Fittings shall

be paid for separately)

Polyester powder coated aluminium

(minimum thickness of polyester powder

coating 50 micron)

Providing and fixing double glazed hermetically sealed glazing in aluminium windows,

ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm

air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants,

17 21.10 sealant (Both primary and secondary sealant) etc. as per specifications, drawings and 51.975 sqm 4013.35 208593.87

direction of Engineer-in-charge complete.

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

providing weather silicon sealant over backer rod of approved quality as per

architectural drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width 400 METRE 85.25 34100.00

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of

handles of approved quality for aluminium door, with necessary screws etc complete

19 9.113 as per direction of Engineer- in-charge. 12 Nos 721.75 8661.00

Providing and fixing bright finished brass hanging type floor door stopper with

necessary screws, etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight

upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed

21 9.84 adjustment with necessary accessories and screws etc. complete 24 Nos 856.30 20551.20

Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with

zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450

mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate

channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having

22 12.45 flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with

the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and perimeter channel with

the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges of the board with recommended

jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board,

all as per manufacturer's specification and also including the cost of making openings

for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the Engineer

in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :

12.45.1 2011 (Board with BIS certification marks) 112 SQM 1145.95 128346.40

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface

to prepare the surface even and smooth complete.

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming

coat of exterior primer applied @ 2.20kg/10 sqm

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and

manufacture, including applying

25 13.83 additional coats wherever required to achieve even shade and colour.

Providing and fixing Toilet cubicals with the following specifications

Thickness of Compact Laminate : 18 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of Cubicle : As per Drawing : 1000mm (W) & 1550mm (D) x 1830mm (H)

Door Size : 1725mm (H) x 610mm (W)

Divider Size : 1725mm (H)

Overall Height Of Cubicle : 1830mm (Including bottom Gap of 100mm)

Accessories: Stainless Steel - 304 Grade accessories)

a) SS "U" & Door Stopper Channel

b) SS “F” channel (Only Corner Unit)

c) SS Coat Hook

d) SS Privacy Thumb turn c/w Occupancy Indicato

e) SS Door Knob

26 NDSR f) SS Spring Loaded Butt Hinges with Cover 4 Nos 40608.9 162435.60

g) SS Shoe Box Leg 18mm - 316 Grade

h) Rubber Lining for Groove

i) S.S.Screws 304 G & P .V.C Wall Plugs

j) SS Door Stopper Channel

SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN

Supply and fixing of “SELF SUPPORTED” SECRET FIX STANDING ROOFING

SYSTEM IN 0.9mm THICK AA 3004 ALUMINIUM ALLOY. The general

roofconstruction shall comprise of:

(1) First Layer (Top layer) – Aluminium 65/400 profile sheeting manufactured from

aluminium self-supported standing seam roof system from aluminium alloy AA 3004

H44 (AlMn1Mg1) as specified in BS EN 1396: 2007 minimum material thickness of

0.9mm and PVDF2 finish (standard colours ) on the exposed surface. The profiled

roof panel should have 24nos. of Micro ribs of height 1.5mm in between 3Nos of Mini

ribs for extra strength Accessories, Fasteners. The material properties shall be as

follows: Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185

N/mm2, Modulus of elasticity: 70,000 N/mm2.The roof panels shall follow the building

profile and will be smooth curved. The roof panels will be fixed on Aluminium 0

Halters/Halters/Clips. Halters/Clips to be fixed to the purlins / Top Hat with SS 304

screws All installation is to be carried out by approved trained roofing installer.

The roofing system provider shall be certified with a British Board of Agreement and

should have both Factory Mutual (FM-4471) & UL Certification (UL-90) and should

have at least 2 roll formers not less than two years old in India. All installation is to be

carried out by approved trained roofing installer. The installation team shall be fully 0

trained and approved by the supplier. The installer should have installed approx.

10000 sqm of Aluminium standing seam roofing system in Institution of equal repute

(2) Second layer: Insulation – Layer of Rockwool insulation of 100mm thickness each

minimum 60 kg/m³ density with thermal conductivity of K=0.038 W/mk at 20 degrees

Celsius when tested to ASTM C518.

(3) Third layer: Single layer of aluminium foil of minimum thickness 0.2mm.

(4) Fourth Layer - Halters – Aluminium Halters/ – in grade 6082 (T6), of suitable height

with thermal barrier pads to be fixed to the sub purlins with SS 304 screws only

5) Fifth Layer: Steel Deck liner – Solid 28- 35 /200-250 galvalume colour coated steel

deck liner (GSM 150) 550 MPa, 0.5 mm TCT 1000 mm ribs spanning up to 1400 mm

maximum centres (multiple spans). The finish to the exposed surface of the liner will

be polyester coating with film thickness of 23µm +/- 2 µm

Aluminium Flashing 0.9mm thick: Flashings manufactured from aluminium alloy AA

3004(AlMn1Mg1) as specified in BS EN 1396: 2007 minimum material thickness of 0.9

mm and Fluorocarbon PVDF finish on the exposed surface. The material shall be

28 NDSR same colour as of roofing sheet. Girth – 400mm to 560mm 175 METRE 2242.8 392490.00

Providing and fixing of 2 mm thick Aluminium gutter with double side vulcanised rubber

Expansion joints at every 8m length. Necessary down take spout with diameter upto

150 mm at required intervals & other accessories like Cover plate, end caps and

29 NDSR welding at joints. The Girth of gutter would be upto 1800mm. Dye Penetration test to 150 METRE 6852.6 1027890.00

be conducted wherever aluminium welding has been done.

Providing and fixing 75 mmx5mm skirting with aluminium profile, with necessary fixing

30 NDSR arrangements and screws, including drilling necessary holes for rawl plugs etc. 300 METRE 333.9 100170.00

Providing and fixing Stainless steel satin finish SS 304 grade Handles with SS screws

for wooden doors of approved make and model all complete as per the directions of

Engineer-in-charge 300MM

Providing and fixing Stainless steel satin finish SS 304 grade Tower Bolts SS screws

for wooden doors of approved make and model all complete as per the directions of

Engineer-in-charge 250MM

Providing and fixing Stainless steel satin finish SS 304 grade Sliding Door bolts

250x16 mm for wooden doors of approved make and model all complete as per the

directions of Engineer-in-charge 250MMX16MM

COST OF CIVIL WORKS 14695148

Providing and fixing soil, waste and vent pipes

Sand cast iron S&S pipe as per IS: 1729

Providing and filling the joints with spun yarn, cement slurry and

cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

Providing and fixing M.S. holder-bat clamps of approved design tSand Cast iron/cast

iron (spun) pipe embedded in and includingcement concrete blocks 10x10x10 cm of

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mnominal

3 17.37 size),including cost of cutting holes and making good the walls etc. :

17.37.1 For 100 mm dia pipe 8 Each 308.45 2467.6

Providing and fixing bend of required degree with access door, insertionrubber washer

3 mm thick, bolts and nuts complete.

Sand cast iron S&S as per IS - 1729

Providing and fixing double equal junction of required degree withaccess door,

insertion rubber washer 3 mm thick, bolts and nuts

Sand cast iron S&S as per IS - 1729

Providing and fixing single equal plain junction of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

Sand cast iron S&S as per IS - 1729

Providing and fixing terminal guard :

Sand cast iron S&S as per IS - 1729

Providing and fixing collar :

Sand cast iron S&S as per IS - 1729

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and

fittings of diameter :

Providing and fixing trap of self cleansing design with screwed down

or hinged grating with or without vent arm complete, including cost of

cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

Sand cast iron S&S as

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse

sand : 10 graded stone aggregate 40 mm nominal size) all-round

S.W. pipes including bed concrete as per standard design :

Note:- This work shall be done all around CI pipe at toilet.

100mm diameter.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal

stability for hot & cold water supply, including allCPVC plain & brass threaded fittings,

including fixing the pipe with

12 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete

as per direction of Engineer in Charge.

15 mm nominal dia Pipes

20 mm nominal dia Pipes

25 mm nominal dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and

making good the walls etc.i/c cutting and making good the walls etc.

15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

TOTAL FOR Plumbing

DSR ITEMS Electrical Work

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductorsingle core cable in surface / recessed medium class

1 1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with

1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVCinsulated copper conductor

single core cable in surface /recessed medium class PVC conduit, 2 way modular

switch,modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC

insulated copper conductor single core cable

etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor

single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq.

3 1.12 mm FRLS PVC insulated copper conductor single core cable for loop earthing as 20 meter 200.00 4000

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS

PVC insulated copper conductor, single core cable in surface/ recessed medium class

4 1.14 required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

2 X 16 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface/recess including cutting the wall and making good the same in

case of recessed

5 1.21 conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on

surface or in recess, including providing andfixing 3 pin 5/6 A modular socket outlet

and 5/6 A modular

switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate andcover in front on

surface or in recess, including providing andfixing 6 pin 5/6 & 15/16 A modular socket

7 1.32 outlet and 15/16 A modular switch, connections etc. as required. 4 each 495.00 1980

Supplying and fixing two module stepped type electronic fanregulator on the existing

8 1.25 modular plate switch box includingconnections but excluding modular plate etc. as 5 each 342.00 1710

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit

breaker suitable for inductive load offollowing poles in the existing MCB DB complete

9 2.10 withconnections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three poleand neutral, sheet steel,

MCB distribution board,415 V, onsurface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, dinbar,interconnections,powder paintedincluding earthing

10 2.4 etc. as required. (But without

MCB/RCCB/Isolator)

4 way (4 + 12), Double door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB

complete with connections, testing and

commissioning etc. as required.

Supply installation testing & commissioning of Glamax LED 20 W TW Smart Batten

(Make - Havells)

Supply installation testing & commissioning of Auroum LED 15 W TW Smart

Downlighter (Make - Havells)

Supply of ISI marked aluminium conductor FR XLPE insulated cable as per IS 7098

and cable,armoured,served,sheathed 1100 volts grade.

Laying of one number PVC insulated and PVC sheathed / XLPEpower cable of 1.1 KV

grade of following size direct in groundincluding excavation, sand cushioning,

protective covering andrefilling the trench etc as required.

Above 35 sq. mm and upto 95 sq. mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover

plate for modular switches in recess etc.

1 or 2 Module (75mmX75mm)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in theexisting surface/

recessed Steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor

PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in

surface/ recessed steel/ PVC conduit as required.

Supply,Laying and termination of 10 pair telephone cable,0.5 mm copper PVC

insulated,unarmoured telephone cable drawn .

Supply,Laying and termination of 10 pair telephone terminal block ….

Supply,Installation,Testing and Commisioning of Following modular switch/socket on

existing modular plate& switch box including connection ….

TOTAL ELECTRICAL WORK 220585

17.32 Providing and fixing mirror of superior glass (of approved quality) and

of required shape and size with plastic moulded frame of approved

1 make and shade with 6 mm thick hard board backing :

17.32.3 Oval shape 450x350 mm (outer dimensions) each 1157.40

NDSR Providing and fixing Toilet Roll Holder of Make - Jaguar. Model No.AKP-35751P

Providing and fixing Towel Ring Square of Make- Jaguar. Model no. AKP-35721P

Providing and fixing Single piece Rimless Wall Hung WC with PP soft close CNS-WHT-

963SPP of Make-Jaguar with Control Plate Opal JCP-CHR-152415 of Make- Jaguar

along with fixing Single piece slim concealed cistern body JCS-WHT-2400 of make -

Providing and fixing Urinal without Sensor with fixing access URS-WHT-13255 of Make

- Jaguar along with Sensotronic Mini Urinal F/V Inst.Box SNR-STL-51083.

Providing and fixing Urinal Partition with frosted glass, Glass: 8mm/10mm, Finish:

6 NDSR Chrome of make-Jaguar.Model no.1810-UC/1110UC 2.00 Each 4833.90 9667.80

Providing and fixing Soap Dispenser with glass bottle of Make- Jaguar. Model No.-

Providing and fixing Under Counter Basin Size 480X370X200mm CNS-WHT-701 of

Make-Jaguar,With Single lever Tall Boy with 180mm Extension body fixed Spout

without Popup Waste System with 600mm Long Braided Hoses, Of Make-

8 NDSR Jaguar.Model No.VGP-81005NB. with Waste Coupl.32mm Full Thread ALD-CHR-705 2.00 Each 9819.90 19639.80

of Make- Jaguar. along with Bottle Trap (With internal partition ) 32 ALD-CHR-

769L250X190 of Make -Jaguar.also fixing Bib Cock with wall flanges of Make -Jaguar.

Model No. VGP-81005NB

Total Sanitary Work 156052.80

Supply ,Installation ,Testing and Commissioning of 1.5 Ton 3Star Split AC including 3

meter refrigenct pipe as per approved makes

Supply and fixing Refrigerant pipe for 1.5 Tr ( after 3 meter) & Drain Piping

Supply ,Installation ,Testing and Commissioning of Voltage stablizer for AC 4KVA

GRAND TOTAL-A 16706127.03

GRAND TOTAL-A 16706127.03

Buy back of old AC, copper pipe line, Fitting Fixture(Plumbing Electrical), including

Dismentalling, Handling, storage.-B

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

SL. No. DSR ITEM Description of Item Quantity Unit Rate Amount

REPAIRING WORKS DSR NDSR

Dismantling tile work in floors and roofs laid in cement mortar

including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious

China) including stacking of useful materials near the site and

disposal of unserviceable materials within 50 metres lead.

Providing and fixing Ist quality ceramic glazed wall tiles

conforming toIS: 15622 (thickness to be specified by the

manufacturer), of approved

make, in all colours, shades except burgundy, bottle green,

black ofany size as approved by Engineer-in-Charge, in

skirting, risers of stepsand dados, over 12 mm thick bed of

coarse sand) and jointing with grey cement slurry @ 3.3kg per

sqm,including pointing in white cement mixed with pigment of

Providing and laying Polished Granite stone flooring in

required designand patterns, in linear as well as curvilinear

portions of the building all

complete as per the architectural drawings with 18 mm thick

stone slabover 20 mm (average) thick base of cement mortar

1:4 (1 cement : 4coarse sand) laid and jointed with cement

4 11.56 slurry and pointing with whitecement slurry admixed with

pigment of matching shade includingrubbing, curing and

polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby

Red or equivalent

Providing and fixing mineral fibre false ceiling tiles at all

heights of size 595X595mm of approved texture, design and

pattern. The tiles should

have Humidity Resistance (RH) of 99%, Light Reflectance ?

85%,Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire

per (BS 476 pt - 6 &7)in true horizontal level suspended on

interlockingT-Grid of hot dipped all round galvanized iron

(galvanized @120 gsm) comprising of main T runners of

15x32 mm oflength 3000 mm, cross T of size 15x32mm of

length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length

600 mmto form grid module of size 600x600 mm suspended

from ceiling using.........

A) SANITARY INSTALLATION

Providing and fixing white vitreous china pedestal type water

closet (European type W.C. pan) with seat and lid, 10 litre low

level white P.V.C. flushing cistern, including flush pipe, with

manually controlleddevice (handle lever), conforming to IS :

7231, with all fittings and fixtures complete, including cutting

and making good the walls and

floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

17.32 Providing and fixing mirror of superior glass (of approved

of required shape and size with plastic moulded frame of

make and shade with 6 mm thick hard board backing :

17.32.3 Oval shape 450x350 mm (outer dimensions)

Toilet Cubicles made of 18mm thick compact laminate HPL

Boards complete with doors and SS accessories of MARINO

Providing and fixing Single piece Rimless Wall Hung WC with

PP soft close CNS-WHT-963SPP of Make-Jaguar with

Control Plate Opal JCP-CHR-152415 of Make- Jaguar along

4 NDSR with fixing Single piece slim concealed cistern body JCS-WHT- 4.00 Each 17512.443 70049.77

2400 of make -Jaguar.

Providing and fixing Under Counter Basin Size

480X370X200mm CNS-WHT-701 of Make-Jaguar,With

Single lever Tall Boy with 180mm Extension body fixed Spout

without Popup Waste System with 600mm Long Braided

Hoses, Of Make-Jaguar.Model No.VGP-81005NB. with Waste

Coupl.32mm Full Thread ALD-CHR-705 of Make- Jaguar.

along with Bottle Trap (With internal partition ) 32 ALD-CHR-

769L250X190 of Make -Jaguar.also fixing Bib Cock with wall

flanges of Make -Jaguar. Model No. VGP-81005NB

Providing and fixing Towel Ring Square of Make- Jaguar.

6 NDSR Model no. AKP-35721P 14.00 Each 2017.638 28246.93

Providing and fixing Health Faucet with 8mm dia 1.2 M long

Flexible tube Wall hook of Make- Jaguar

Providing and fixing Soap Dispenser with glass bottle of Make-

8 NDSR Jaguar. Model No.- AKP-35735P. 14.00 Each 1673.973 23435.62

Providing and fixing Toilet Roll Holder of Make - Jaguar.

9 NDSR Model No.AKP-35751P 14.00 Each 1175.4 16455.60

Providing and fixing Urinal without Sensor with fixing access

URS-WHT-13255 of Make - Jaguar along with Sensotronic

Mini Urinal F/V Inst.Box SNR-STL-51083.

Providing and fixing Urinal Partition with frosted glass, Glass:

11 NDSR 8mm, Finish: Chrome of make-Jaguar.Model no.1810- 8.00 Nos 4833.9 38671.20

TOTAL FOR SANITARY INSTALLATION

B) WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, i/c fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of

1 DSR-2021 Item - 18.8 pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including

testing of joints complete as per direction of Engineer in

Concealed work, including cutting chases and making good

DSR-2021 Item - 15 mm nominal outer dia pipe

DSR-2021 Item - 20 mm nominal outer dia pipe

Providing and fixing gun metal gate valve with C.I. wheel of

DSR-2021 Item no. approved quality (screwed end):

DSR-2021 Item - 20 mm nominal bore

TOTAL FOR WATER SUPPLY

1 17.35 Providing and fixing soil, waste and vent pipes

17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 86.00 mtr 1018.5 87,591.00

Providing and filling the joints with spun yarn, cement slurry

2 17.36 cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I.

Providing and fixing M.S. holder-bat clamps of approved

design tSand Cast iron/cast iron (spun) pipe embedded in and

3 17.37 includingcement concrete blocks 10x10x10 cm of 1:2:4 mix (1

cement : 2 coarse sand : 4 graded stone aggregate 20

mnominal size),including cost of cutting holes and making

good the walls etc. :

Providing and fixing bend of required degree with access

door, insertionrubber washer 3 mm thick, bolts and nuts

17.38.1.1 Sand cast iron S&S as per IS - 1729 18.00 Each 530.7 9,552.60

Providing and fixing double equal junction of required degree

withaccess door, insertion rubber washer 3 mm thick, bolts

5 17.41 and nuts

17.41.1 Sand cast iron S&S as per IS - 1729 18.00 Each 1038.75 18,697.50

6 17.56 Providing and fixing terminal guard :

17.56.1.1 Sand cast iron S&S as per IS - 1729 8.00 Each 392.9 3,143.20

7 17.57 Providing and fixing collar :

17.57.1.1 Sand cast iron S&S as per IS - 1729 18.00 Each 399.6 7,192.80

Providing lead caulked joints to sand cast iron/centrifugally

cast (spun) iron pipes and fittings of diameter :

Providing and fixing trap of self cleansing design with screwed

9 17.60 or hinged grating with or without vent arm complete, including -

cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

17.60.1.1 Sand cast iron S&S as 9.00 Each 1604.1 14,436.90

Providing and laying cement concrete 1:5:10 (1 cement : 5

coarse sand : 10 graded stone aggregate 40 mm nominal

size) all-round S.W. pipes including bed concrete as per

standard design :

19.2 Note:- This work shall be done all around CI pipe at toilet.

ELECTRICAL WORK

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper

conductorsingle core cable in surface / recessed medium

1 1.10 conduit, with modular switch, modular plate, suitable GI box

and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS

PVCinsulated copper conductor single core cable in surface

/recessed medium class PVC conduit, 2 way modular

switch,modular plate, suitable GI box and earthing the point

with 1.5sq.mm FRLS PVC insulated copper conductor single

etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in

surface/recessed medium class PVC conduit alongwith 1 No.

4 sq. mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with

thefollowing sizes of FRLS PVC insulated copper conductor,

single core cable in surface/ recessed medium class PVC

4 1.14 conduit as -

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supply installation testing & commissioning of Glamax LED

20 W TW Smart Batten (Make - Havells)

Supply installation testing & commissioning of Auroum LED

15 W TW Smart Downlighter (Make - Havells)

Providing & Fixing TURBOFORCE Exhaust Fan,450 mm

sweep 1400 Revolution per minuteVibration free balanced

7 NDSR impellers Dynamically balanced impellers for smooth & 14.00 Each 6732.99 94,261.86

vibration-free operation

TOTAL FOR TOILET

RENNOVATION OF PORCH

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

RENNOVATION OF PORCH

Sl. No. Description of Item Quantity Unit Amount

Item DSR NDSR

P&F PEB METAL FRAME FOR PORCH AND AROUND CONCRETE

COLUMNS COMPLETE WITH PRIMER AND EPOXY PAINT AS SPECIFIED

Providing and supplying aluminium extruded tubular and other aluminium

sections as per the architectural drawings and approved shop drawings , the

aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super

durable powder coating of 60-80 microns conforming to AAMA 2604 of required

colour and shade as approved by the Engineer-in-Charge. ( The item includes

cost of material such as cleats, sleeves, screws etc. necessary for fabrication

of extruded aluminium frame work. Nothing extra shall be paid on this

account). The weight of aluminium extruded section shall be taken for purpose

P&F 6MM THICK HIGH PRESSURE LAMINATE CLADDING ON EXISTING

Providing and Fixing of Multi cell/tight cell Polycarbonate Panels 16 mm thick

with 5 cells - 6 walls structure over MS Supporting structures.

P&F CNC CUT STAINLESS STEEL SHEET BELOW POLYCARBONATE

PANELS FIXED ON MS FRAMES AS PER APPROVED DESIGN

RENNOVATION OF PORCH

Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang

saw cut stone with (machine cut edges) of uniform colour and size upto

1mx1m, fixed to structural steel frame work and/ or with the help of cramps,

pins etc. and sealing the joints with approved weather sealant as per

Architectural drawing and direction of Engineer-in-charge. (The steel frame

work, stainless steel cramps and pins etc. shall be paid for separately).

8.20.1 Red sand stone - 30mm thick gang saw cut stone 40 sqm 2459.7 98388.00

Providing and fixing structural steel frame (for dry cladding with 30 mm thick

gang saw cut with machine cut edges sand stone) on walls at all heights using

M.S. square/ rectangular tube in the required pattern as per architectural

drawing, including cost of cutting, bending, welding etc. The frame work shall

be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc.

which shall be welded to the frame and embedded in brick wall with cement

concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20

mm nominal size) of size 300x230x300 mm, including cost of necessary

centring and shuttering and with approved expansion hold fasteners on

CC/RCC surface, including drilling necessary holes. Approved cramps/ pins

etc. shall be welded to the frame work to support stone cladding, the steel work

will be given a priming coat of Zinc primer as approved by Engineerin-charge

and painted with two or more coats of epoxy paint (Shop drawings shall be

submitted by the contractor to the Engineer-in-charge for approval before

execution). The frame work shall be fixed in true horizontal & vertical

lines/planes. (Only structural steel frame work shall be measured for the

purpose of payment, stainless steel cramps shall be paid for separately and

nothing extra shall be paid).

RENNOVATION OF PORCH

Providing and fixing adjustable stainless steel cramps of approved quality,

required shape and size, adjustable with stainless steel nuts, bolts and washer

8.22 (total weight not less than 260 gms), for dry stone cladding fixed on frame work 600 each 365.65 219390.00

at suitable location, including making necessary recesses in stone slab, drilling

required holes etc complete as per direction of the Engineer-in-charge.

TOTAL FOR PORCH 1297385.34

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

CODE Description of Item Quantity Unit Rate Amount

Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Painting with aluminium paint of approved brand and manufacture to

give an even shade .

Two or more coats on new work

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of

chilled water piping plumbing inside the

building (with necessary clamps, vibration isolators and fittingsbut excluding

valves, strainers, gauges etc.) duly insulated with

fire retardant quality expanded polystrene moulded pipe sectionof density 20

kg/cu.m after a thick coat of cold setting adhesive

3 NDSR (CPRX compound) wrapping with 500g polythene faced hessainand finally

applying 0.63mm aluminium sheet claddingcomplete with type3 , grade 1 roofing

feltstrip(as per IS:1322 asamended up to date ) atjointsrepairing of damage to

buildingetc. as per specifications and as required complete inall respect.

150mm dia. (75 mm thick insulation)

Supplying, laying/ fixing of following thickness insulation with fire retardant quality

expanded polystrene moulded pipesection of density 20 kg/cu.m after a thick coat

of cold settingadhesive (CPRX compound) wrapping with 500g polythenefaced

hessain and finally applying 0.63mm aluminium sheetcladding complete with

4 NDSR type3 , grade 1 roofing feltstrip(as perIS:1322 as amended up to date ) at joints

repairing etc. as per specifications and as required complete in all respect..

RENOVATION OF EXAMINER ROOM

NATIONAL COUNCIL FOR HOTEL MANAGEMENT AND CATERING TECHNOLOGY

RENOVATION OF EXAMINER ROOM

Description of Item Quantity Unit Amount

No. Item DSR NDSR

Making the opening in brick masonry including dismantling in flooror walls by cutting masonry

and making good the damages to walls,flooring and jambs complete, to match existing surface

i/c disposalof mulba/ rubbish to the nearest municipal dumpingground, allcomplete as per

direction of Engineer-in-Charge.

Dismantling stone slab flooring laid in cement mortar including

stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead.

Extra for Carriage of materials upto 0.5 Km

Every Additional Lead Of 50 Meter unloading or part thereof beyond First 50M upto 9 such

3A additional Lead 100.00 Cum 40.77 4077.00

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,

including cutting the patch in proper shape, raking out joints and preparing and plastering the

surface of the walls complete, including disposal of rubbish to the dumping ground, all complete

as per direction of Engineer-in-Charge.

14.1.1 With Cement Mortar (1 Cement : 4 Fine Sand) 20 Sqm 462.3 9246.00

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below 2 Each 302.7 605.40

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of

serviceable materials and disposal of unserviceable materials within 50 metres lead.

Cost Repairing Works (A) 57214

RENOVATION OF EXAMINER ROOM

Providing and laying Vitrified tiles in different sizes (thickness to bespecified by the

manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved

brand & manufacturer, in allcolours and shade, in skirting, riser of steps, laid with cement

basedhigh polymer modified quick set tile adhesive (water based) conformingto IS: 15477, in

7 11.47 average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made

Size of Tile 1000x1000 mm

Grouting the joints of flooring tiles having joints of 3 mm width, usingepoxy grout mix of 0.70 kg

of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg),

including filling /grouting and finishing complete as per direction of Engineer-in-charge.

9 13.116 POLISHING WORKS ON EXISTING DOORS AS PER APPROVED DESIGN AND SHADE 10.08 Each 1156.55 11658.02

Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded

built up standard tubular sections/appropriate Z sections and other sections of approved

makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size,

including necessary filling up the gaps at

10 21.1 junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.

Aluminium sections shall be smooth, rust free,

For fixed portion

Powder coated aluminium (minimum

21.1.1.2 thickness of powder coating 50 micron) 57.4 Kg 466.3 26742.31

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

11 21.1.2 for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

Powder coated aluminium (minimum

21.1.2.2 thickness of powder coating 50 micron) 23.4 kg 564.8 13216.32

RENOVATION OF EXAMINER ROOM

Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc.

with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the

directions ofengineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight noless than 12.50 kg/sqm)

Providing and fixing false ceiling at all height including providing andfixing of frame work made of

special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120

gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x

15 12.45 1.6 mm thick with flanges of27 mm and 37mm, at1200 mm centre to centre, one flange fixed to

12.5 mm thick tapered edge gypsum plain board

conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

Providing and fixing tiled false ceiling of specified materials of size

595x595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanized steel sections ( galvanized @

16 12.52 120 grams/ sqm, both side inclusive) consisting of main "T" runner

with suitably spaced joints to get required length and of size 24x38

mm made from 0.30 mm thick (minimum) sheet, spaced at

12.5 mm thick square edge PVC Laminated Gypsum

Tile of size 595x595 mm, made of Gypsum plasterboard,

manufactured from natural gypsum as per IS 2095 part I

12.52.3 and laminated with white 0.16mm thick fire retardant 58.05 SQM 1948.95 113136.55

PVC film on the face side and 12micron metalized

polyester on the back side with all edges sealed with

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :

13.60.1 Two or more coats on new work 61.38 sqm 137.85 8461.23

Providing and applying plaster of paris putty of 2 mm thickness over

plastered surface to prepare the surface even and smooth complete

COST OF RENOVATION

RENOVATION OF EXAMINER ROOM

Providing & fixing of Roller Blinds as per the approved sample with fabric made up of 28%

Polyesterand 68% PVC 4% alumlnlum layer on the back, l2Stex Tilter Basket weave of thickness

O.S3mm tS% (ISO 2286-2) and wleghing 407gsmt5% with openess factor of 5% .The tear

resistance (Warp 172Nt10% & ,Weft 153NH0%) As per ISO 544674, and pass NFPA 701 Fire

Resistnncc test.Solar trnnsmlttance,Ts%(11).Solar reflectance Rs%(45).Solar Absortance

As%(44),Light Trarumiltllnce Tv%(4) & UV transmittance Tuv%(7).The control clutch drive unit

engineered heavy duty chain drive pulley operating sytem consisbng of gear clutch housing and

locking plug containing minimum 6 rib! and inerted at minimum of 37mm into roller rube. It Is

selflubrtcaling Exclusive dutch wltb safety pin for bracket Installation and unlocking pm for quick

manual removal. Universal clutch Is most convenient for large windows uown to thesmallest

windows. It shall be driven by a ball chain pulley with ball ch in and can be positioned at Right

hnnd or Left hand side of lhe shade. Clutch gear ration l.75:1for reduced operating force on

larger blinds. Tube bearing plug idler Exclusive sclfluhricadng spring loaded plast1cbearing end

plug with positive locking wheel allows for adjustment and provides for a secure Installation and

NDSR removal of shade. Tube bearing plug contain minimurr 6 ribs and ln.serted a minimum of37mm 14.4 Sqm 2108 30353.25

Into roller tube. Mounting bardw;are brackets universal brackets including end plug bracket with

lock down retainer device. Bnockcts finish of powder coated metal Installation brackets made or

stamped and hardened steel with 46mm projection for wal ceilingand side fitting with sws and

end cap covers. Roller tube circular-shaped aluminum tube extruded from nlloy 6060 and temper

T66- EN 7SS of 37mm Inside diameter and outside diameter 40.2mm extruded tube lO have a

1.6mm wall thickness with standard anodized natural finish.Heavily relnrorced wilh minimum six

Internal ribs providing additional tensile strength and allows for secure placements of clutch and

end plug. Bottom rail flat-shaped extruded aluminum from alloy 6060 and temperT66- EN755 of

dimension 13mm • JOmm and wall thickness of 1.5mm a.nd welghtof390g/m. Rall standard

finish of powder coat white color and provided cover. Ball chain shall be 2mm diameter cord with

4.Smm diameter acetalballs

Supply ,Installation ,Testing and Commissioning of 1.5 Ton 3Star Split AC including 3 meter

refrigenct pipe as per approved makes

20 NDSR Supply and fixing Refrigerant pipe for 1.5 Tr ( after 3 meter) & Drain Piping 1 mtr 1048 1048.49

21 NDSR Supply ,Installation ,Testing and Commissioning of Voltage stablizer for AC 1 Each 3084 3083.78

22 NDSR Supply ,Installation ,Testing and Commissioning of SPOT LIGHT 4 Each 2046 8185.59

Supply ,Installation ,Testing and Commissioning of SPOT LIGHT Supply ,Installation ,Testing and

Commissioning of TRACK

24 NDSR STRIP LIGHT 12 METRE 648 7771.13

25 NDSR Supply ,Installation ,Testing and Commissioning of SURFACE LIGHTS 6 EACH 907 5439.79

COST OF LIGHTINING, AC 95182

Grand Total 432772

Grand Total 432772