GE(W)/HSR-05/2022-23 REPAIR REPLACEMENT OF GATE DRAIN CULVERT BOUNDARY WALL CATTLE FENCING OF ZONE B AT HISAR MIL STN UNDER GE (W) HISAR

Amount

Demolition of cement concrete(unreinforced)/ lime concrete as in ground floor N .exceeding 15cm thickness including removing rubbish complete all as specified and directed.

M&L 25 mm providing cement concrete (1:2:4) type B-0 (12.5 mm graded aggregates) as in drain/surface channel, finishing the concrete surface even and smooth without using extra cement etc complete all as specified and directed.

M&L providing cement concrete (1:5;10) type E-1 (20 mm graded aggregates) in filling and mass concrete in bed of drain / surface channel etc and simlar work etc complete all as specified and directed.

M&L for Flush pointing to brick walls in CM (1:4) complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. Including Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

All as item no 05 but in CM 1:4 complete all as specified and directed.

All as above item no 05 but 10mm thick in CM 1:3 as on RCC surface complete all ass specified and directed. Note: Supply only of WPC will be measured and paid under separate item

M & L two coat of cement base paint on new surfaces of walls including preparation of surfaces complete all ass specified and directed.

M & L one coat of cement base paint on old or new surfaces of walls including preparation of surfaces complete all ass specified and directed.

M&L for preparation new plastered surfaces RCC surface /parapet wall of culvert and applying two coat of white wash complete all ass specified and directed.

M&L for preparation old plastered surfaces of RCC surface /parapet wall of culvert and applying one coat of white wash complete all ass specified and directed.

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as inin lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed ® kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in Cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L for except Brick work with old size Sub class 'B' straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.

M&L for chequered cement concrete tiles Checmically treated machine pressed, heavy duty of size 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry with grey cement and with pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block,grey and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade , Laid over 20mm thick sand cushine and 50mm thick PCC 1:4:8 type B-1 using 20 mm graded stone agg including demolition of existing tiles/pcc and removing from site complete all as specified and directed.

S&F Mild steel work for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if Required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 ®including dismantling old gate and removing from site complete all as specified and directed.

Excavating in soft/loose soil in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers notexceeding 25 cm complete all as specified and directed.

M&L for Plain Cement concrete (1:3:6) type c-1 using 20mm graded stone aggregates as in foundations,filling and massconcrete complete all as specified and directed.

S&F rolled mild steel section like Joist, channel, angle, or tee sections,fixed independently as in posts and struts in fencing including cutting tops to shapeas directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.

supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

M&L for two coat of synthetic enamel paint on steel surface over a coat of red oxide primer inclding preparation of Surfaces of any description, over 10cm in width or girth,not otherwisedescribed complete all as specified and directed.

M&L for 50mm thick Plain Cement concrete type D- 2,1:4:8 (40mm gradedaggregate) as in sub base complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from natural ground and making good disturbed ground complete all as specified and directed.

M&L for 12mm dia of neck ,Mild steel rag or lewis bolts, screwed one end,with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n.exc 15cm long complete all as specified and directed.

supply only Mild steel in flat, round or square bars, in available lengths complete all as specified and directed.

M&L Welding in repairs n. exc 2.5cm in length and thickness of metal n.exc 6mm ,including for cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required complete all as specified and directed.

M&L for one coat of synthetic enamel paint on wooden old surface inclding preparation of Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

M&L for one coat of synthetic enamel paint onsteel old surface inclding preparation of Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:4 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. Including complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC M-25 using 20 graded stone aggregate as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including demolition of old rcc slab and similar work complete all as specified and directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for300mm dia , Reinforced concrete pipes, class NP 3 with one collar per length of pipe including pcc bedding, hauching etc and demolition / dismantling of old pipe complete all as specified and directed.

M&L for 200mm dia , Reinforced concrete pipes, class NP 3 with one collar per length of pipe including pcc bedding, hauching etc and demolition / dismantling of old pipe complete all as specified and directed.

Puja Traders

malik constructions

M/S RAJESH KUMAR & SONS

Baljeet Builders & Interior Decorators