Wortks contract for Shevapet Sub division

Amount

Excavation of Pole/Stay pits

Excavation of pole pit up to 27”(8.0m) pole

Stay bit 4.5” to 5” depth

Excavation of pole pit up to 9.14 mtr pole

Hard Rock requires without blasting

Medium rock and debse medium rock reqires blasting

Erection of poles.

RCC poles/Metal pole up to 8.00m (27’)

RCC poles/Metal pole up to 9.14.m(30’) (300 kg)

Erection of stay set complete

Fixing of line materials

HT V Cross arms / Channel Cross arms / Guarding Cross arm 3 1/2, 4 1/2

LT 3 Phase cross arm

LT single Phase cross arm

HT / LT TI Fitting

Fixing of HT Pin Insulators (11/22 KV)

Fixing of HT 11KV stain disc

Fixing of HT 22KV stain disc

Fixing of LT Pin Insulators

Fixing of LT Shackle

Fixing of Knob

Labour charges for alteration of Back clamps/ Stay clamps to suit for the works

Earthing of poles

Paving and Stringing of conductor

ACSR 7/4.09mm Raccoon conductor

7/3.35mm ACSR 7/3.15mm AAAC (Per wire per span)

7/2.59mm ACSR & 7/2.50mm AAAC (Per wire per span)

Structure Erection

Erection of Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos, Earth pits with tubes including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle including concreting (Except erection of transformer)

Erection of single pole structure

Erection of DP Structure with AB switch, Top channel, Cross Bracing, Earthing, Painting, Providing stay and concreting.

Transporting of Poles

Transport of Poles/Materials/Conductors and other materials (excluding loading and unloading charges) below 8 kms (Plains)

Above 8 Kms. For additional Km.

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual upto 100m.

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual beyond 100m.

Loading & Unloading of Poles.

Loading of poles upto 27"

Loading of poles upto 30"

Loading of Metal poles (All sizes)

Unloading of poles upto 27"

Unloading of poles upto 30"

Unloading of Metal poles (All sizes)

Loading of materials

Un-Loading of materials

Services Connections.

Releasing of Single phase service wire and refixing.

Releasing of Three phase service wire and refixing.

Erection of street light including fixure fitting

Dismantling of Line Materials

Dismantling of transformer structure set

Dismantling of Single pole transformer structure set

Dismantling of DP Structure with AB switch, Top channel, Cross Bracing, Earthing, Painting, Providing stay and concreting.

Dismantling of pole (9.0m and above).

Dismantling of pole (7.5m and 8.0mtr).

Dismantling of pole & pole pit and loading unloading of grills(9.0mtr & above)

Dismantling of pole & pole pit and loading unloading of grills(7.5mtr & 8mtr)

Dismantling of HT pin Insulator

Dismantling of HT/LT TI Fitting

Dismantling of 11 KV Strain Disc

Dismantling of 22 KV Strain Disc

Dismantling of LT 3 Phase X arm

Dismantling of Tapping X arm, HT V Cross arms/ Channel Cross arms / Guarding cross arm

Dismantling of 1 PH X arm

Dismantling of Alu Knob

Dismantling of LT pin Insulator

Dismantling of LT Shackle Insulator

Dismantling of Stay set complete

Dismantling of ACSR 7/4.09mm

Dismantling of ACSR 7/3.35mm

Dismantling of ACSR 7/2.59mm & 7/2.11mm ACSR conductor

Loading or unloading of transformer above 100 and upto 200 KVA

Loading or unloading of transformer above 200 KVA.

Erection of New Transformer all capacities (with Jumpering)

Erection of HT metering set

Replacement of failed transformers all capacities.

Dismantling of transformer structure set

Re-stringing of ACSR 7/3.35mm

Re-stringing of ACSR 7/2.59mm

Dismantling of street light including fixture fitting

Tree cutting

Releasing of grills from RCC Poles

Concreting of Poles

Mass concreting including Materials (Cement + River sand/ M.Sand and Blue metals and watering)

Sleeve concreting including cost of Materials and labour 375mm x 375mm x 50mm.

Stay concreting including cost of Materials and labour 375mm x 375mm x 50mm.

Painting

Painting of metal poles including cross arms (Excluding cost of paint)

Numbering of pole with paint with base painting

Painting of RCC/PSC poles (Colour washing)

Painting of Transformer (Double coat)

Painting of HT metering set and box

Lathe works

Drilling of hole in channel only 3/4" & 1"

Cutting of channel

Cutting of RSJ poles

Miscellaneous Works.

Providing LT bus bar arrangement in DT structure loc.

Erection of New 10' Earth pipe replacing the corroded earth pipe and renewal of earthing including burying looping and binding.

G.S.T. @18% should be Entered by the Bidder

S P M ENGINEERING ENTERPRISES